Wyszukiwarka
Katalog Publikacji
Filtry
wszystkich: 70039
wyświetlamy 1000 najlepszych wyników Pomoc
Katalog Publikacji
Rok 2025
-
MHD Casson flow across a stretched surface in a porous material: a numerical study
PublikacjaIn this study, we examine the nature of magnetohydrodynamic (MHD) Casson flow of fluid across a stretched surface in a porous material. It studies how the behaviour of Casson fluids is affected by a number of variables, including thermal radiation, chemical processes, Joule heating, and viscosity dissipation. The Keller box strategy, based on the finite difference method (FDM), is used to tackle the complex numerical problem. Graphical...
-
Microstructure degradation and creep failure study of the dissimilar metal welded joint of heat-resistant steel and Inconel 617 alloy tested at 650 °C and applied stress range of 100–150 MPa
PublikacjaThe advanced ultra-supercritical (A-USC) power plant system is anticipated to become India's next-generation base-load power station. To adopt AUSC technology, dissimilar welded joints (DWJs) between heat-resistant steels and the nickel-based alloys, using the nickel-based fillers, will need to be implemented. However, failure of dissimilar welded joints from P92 steel base metal or the heat affected zone (HAZ) has been commonly...
-
Mitochondrial exonuclease EXOG supports DNA integrity by the removal of single-stranded DNA flaps
Publikacja -
Mixed, quantum-classical description of electron density transfer in the collision process
PublikacjaIn this work, we investigate an ion-atom model describing the time-dependent evolution of electron density during the collision. For a S3+- H system, numerical simulations are based on classical trajectory calculations, and the electron density behaviour is described with the time-dependent Schrödinger equation. We apply the finite difference method to obtain quantitative insights into the charge transfer dynamics, providing detailed...
-
Mobile mutual-visibility sets in graphs
PublikacjaGiven a connected graph G, the mutual-visibility number of G is the cardinality of a largest set S such that for every pair of vertices x, y ∈ S there exists a shortest x, y-path whose interior vertices are not contained in S. Assume that a robot is assigned to each vertex of the set S. At each stage, one robot can move to a neighbouring vertex. Then S is a mobile mutual-visibility set of G if there exists a sequence of moves of...
-
Modeling of microstructure evolution during high-temperature oxidation of porous Fe-Cr steels
PublikacjaResearch on the high-temperature oxidation of metals and alloys is experimentally challenging due to the requirement for long-term corrosion exposure, and in the case of porous alloys, due to their complex internal microstructure. In this study, a corrosion model based on the morphological operations of dilation and erosion has been developed. This approach allows for a utilization of various raster representations of the microstructure...
-
Modeling the effect of external load variations on single, serie and parallel connected microbial fuel cells
PublikacjaThis paper presents a microbial fuel cell (MFC) model designed to analyze the effect of the external load on MFC performance. The model takes into account the voltage and the chemical oxygen demand (COD) dependence on the external load. The value of the model parameters were calibrated by means of the voltage relaxation method tests using a controlled load current. Laboratory measurements and MATLAB Simulink model computations...
-
Modified U-Net with attention gate for enhanced automated brain tumor segmentation
Publikacja -
Monitoring of absorptive model biogas purification process using sensor matrices and gas chromatography
PublikacjaThis study examined the process of purifying model biogas using a new type of absorbent based on a Deep Eutectic Solvent (DES) and a commercially available absorbent (Genosorb) to remove acetone, toluene, and cyclohexane. The main aim of the research was to control the purification efficiency using gas chromatography (GC) and an alternative method based on sensor matrices (SM). As a result of comparing the multidimensional SM signals...
-
Motivating academic library non-users to [re]discover the academic library’s usefulness for their studying practices - the Gdańsk University of Technology Library perspective.
PublikacjaThe main purpose of this article is to present academic library’s methods of motivating library non-users to rediscover the academic library’s values and usefulness for their studying practices from the Gdańsk University of Technology Library perspective. The author focused on discussing the issue of Polish full-time students as one of the groups of non-users of the academic library. -- Głównym celem artykułu jest...
-
Multimodal Augmented Reality System for Real-Time Roof Type Recognition and Visualization on Mobile Devices
PublikacjaThe utilization of augmented reality (AR) is becoming increasingly prevalent in the integration of virtual reality (VR) elements into the tangible reality of the physical world. It facilitates a more straightforward comprehension of the interconnections, interdependencies, and spatial context of data. Furthermore, the presentation of analyses and the combination of spatial data with annotated data are facilitated. This is particularly...
-
MXene-based materials as adsorbents, photocatalysts, membranes and sensors for detection and removal of emerging and gaseous pollutants: A comprehensive review
Publikacja2D materials have garnered significant attention as potential solutions to various environmental challenges. Graphene, molybdenum disulfide, MXenes, and boron nitride have emerged as the most popular candidates among these materials. This article presents a comprehensive review and discussion on the emerging applications of MXenes in environmental engineering. MXenes have demonstrated immense potential as future materials for adsorption...
-
Nano-adsorbent Modification by Deep Eutectic Solvents for Wastewater Treatment Applications
PublikacjaThe Greek “εύ” and “τήξις” term is the root of the “eutectic” word that refers to the low melting of mixture. Generally, an eutectic solvent depicts a mixture of components (at least one is in solid phase) that under particular ratios weak molecular interactions allow to obtain a mixture having melting point at a much lower temperature than that of each component (García-Álvarez 2019). Although A. P. Abbott et al. discovered the...
-
Net-zero policy and forward default risk in the energy sector:Evidence of corporate environmentalism using (a)symmetricmodels
PublikacjaThis study aims to examine the impact of the net-zero policy on forward default risk atthe firm level within the energy sector of the US, spanning over the period 2007–2021.The research employs Panel Vector Autoregression (PVAR) modeling, as well as linearand non-linear Autoregressive Distributed Lag (ARDL) models to investigate this rela-tionship. The findings suggest that the implementation of net-zero policy measures canhave...
-
New insights into structural, optical, electrical and thermoelectric behavior of Na0.5Bi0.5TiO3 single crystals
PublikacjaThe single crystals of lead-free Na0.5Bi0.5TiO3 were grown using the Czochralski method. The energy gaps determined from X-ray photoelectron spectroscopy (XPS) and optical measurements were approximately 2.92 eV. The current-voltage characteristics, depolarization current, dc (σdc) and ac (σac) electrical conductivity, and Seebeck coefficient of the crystals were investigated. The frequency/temperature-dependent electrical properties...
-
Novel usage of perinone polymer as solid contact in ion-selective electrodes
Publikacja -
Numerical Simulation of Light to Heat Conversion by Plasmonic Nanoheaters
PublikacjaPlasmonic nanoparticles are widely recognized as photothermal conversion agents, i.e., nanotransducers or nanoheaters. Translation of these materials into practical applications requires quantitative analyses of their photothermal conversion efficiencies (η). However, the value of η obtained for different materials is dramatically influenced by the experimental setup and method of calculation. Here, we evaluate the most common...
-
On a fully three-dimensional bending analysis of very thick smart composite cube-like bulk structures
PublikacjaHere we discuss the behaviour of very thick composite plates considering electro-magneto-elastic coupling of various types using fully three-dimensional (3D) kinematics. Published research highlights a lack of studies on the 3D mechanics of smart composite plates that integrate both higher-order (flexoelectric/flexomagnetic) and lower-order (piezoelectric/piezomagnetic) multiple physical fields (electro-magneto-elastic). The common...
-
On nonlinear 3D electro-elastic numerical modeling of two-phase inhomogeneous FG piezocomposites reinforced with GNPs
PublikacjaThe novelty here comes from not only the perfect nonlinear three-dimensional (3D) electro-elasticity investigation but also the mixed material itself. The literature widely showed mechanical assessments on the piezoelectric structures; however, a lack of nonlinear three-dimensional elasticity studies has been witnessed on these kinds of smart materials. Therefore, a nonlinear 3D elasticity-piezoelectricity coupling is considered...
-
On the use of black tea waste as a functional filler for manufacturing self-stabilizing polyethylene composites: In-depth thermal analysis
PublikacjaThermal and oxidative stabilization are critical aspects in the processing and exploitation of polyolefins. Black tea contains many natural antioxidants, the largest group of compounds in its composition. When used as a filler for composite manufacturing, the thermo-oxidation process of polyethylene can be slowed down. Black tea waste (BTW) generated during the process of packing tea into sachets was introduced into a bio-based...
-
Opposite effect of the Cu photodeposition on the ∙OH generation and diclofenac degradation depends on the exposed anatase facet
PublikacjaExposition of a specific crystal facets and modification with co-catalysts are often used in order to improve photocatalytic activity of a material. However, considering complexity of these interactions, it is still challenging to fully understand and predict activity of a specific system. Here, we report combination of the {0 0 1} and {1 0 1} crystal facets of anatase TiO2 with CuXO co-catalyst, applied for diclofenac degradation,...
-
Optimal bandgap of a single-junction photovoltaic cell for the mobile Internet-of-Things
PublikacjaThe procedure for determining the maximum power of a single-junction photovoltaic cell operating in various types of lighting is presented. This is a key issue for photovoltaics powering the mobile Internet-of-Things (IoTs). The simulations performed are based on the detailed balance principle, without any of simplifying assumptions included in the Shockley-Queisser model. Optimal energy bandgap for diffuse solar light was found...
-
Optimization of constitutive law for objective numerical modeling of knitted fabric
PublikacjaThis paper discusses the problem of macroscopic modeling a knitted technical fabric with the aim to determine a constitutive law for adequately modeling the material response under real-life load. As phenomenological, hyperelastic material laws reveal different parameters due to different test modalities used to identify such parameters, an optimization scheme is proposed to determine an objective solution. The study is conducted...
-
Optimization of Hydrogen Utilization and Process Efficiency in the Direct Reduction of Iron Oxide Pellets: A Comprehensive Analysis of Processing Parameters and Pellet Composition
PublikacjaThe article deals with the H2 consumption for different processing conditions and the composition of the processed pellets during the direct reduction process. The experiments are carried out at 600–1300 °C, with gas pressures of 1–5 bar, gas flow rates of 1–5 L min−1, and basicity indices of 0 to 2.15. Pellets with different compositions of TiO2, Al2O3, CaO, and SiO2 are analyzed. The gas flow rate is crucial, with 0–10 L min−1...
-
Optimizing conductivity in Na-V-Te-O glass through controlled heat treatment
PublikacjaSemiconducting Na2O-V2O5-TeO2 glasses with various Na2O contents were melted and subjected to controlled heating to improve conductivity. Topography analysis were performed using confocal microscopy and scanning electron microscopy on both as-quenched and heat-treated samples. X-ray diffraction confirmed the amorphous nature of the samples post-melting, with subsequent heating resulting in the formation of nanocrystallites primarily...
-
Optimizing Large-Scale Inorganic Processes: Model-Based Digital Design of RH-DS Apparatus
Publikacja -
Optimizing nature-based solutions for urban flood risk mitigation: A multi-objective genetic algorithm approach in Gdańsk, Poland
Publikacja -
Optimizing nature-based solutions for urban flood risk mitigation: A multi-objective genetic algorithm approach in Gdańsk, Poland
PublikacjaNature-based Solutions (NbS) have emerged as a sustainable approach to managing flood risks by enhancing natural water retention and reducing surface runoff in urban areas. As climate change and rapid urbanization exacerbate flood hazards, optimizing the spatial deployment of NbS is crucial for improving urban resilience and mitigating flood impacts. This study presents a comprehensive optimization framework for the spatial allocation...
-
Photocatalytic activity of zinc oxide nanorods incorporated graphitic carbon nitride catalyst
PublikacjaBackground Photocatalysts are user-friendly and serve as compatible materials for degrading industrial dye pollutants. This study utilizes zinc oxide/graphitic carbon nitride (ZnO/g-C3N4) nanocomposites against degrading methylene blue (MB). Methods The hydrothermal method assisted sonication technique was used to fabricate the ZnO/g-C3N4 composite with varying ratios of ZnO/g-C3N4 (1:0.25, 1:0.50, 1:1). The synthesized materials...
-
Photocatalytic selectivity oxidation of 2-phenoxy-1-phenylethanol coupled with Cd-MOF/S/Ni-NiO for hydrogen evolution performance and mechanism
PublikacjaIn this study, Cd-MOF/S/Ni–NiO (MOF = metal–organic framework) composite materials were prepared using a hydrothermal synthesis method and employed for the high-efficiency photocatalytic oxidation of the lignin β-O-4 model compound 2-phenoxy-1-phenylethanol, coupled with water splitting hydrogen evolution. The Cd-MOF/S/Ni–NiO composite material retained the petal-like morphology of Cd-MOF, with Ni-BTC acting as the precursor for...
-
Physicochemical properties of La0.5Ba0.5Co1-xFexO3-δ (0≤x≤1) as positrode for proton ceramic electrochemical cells
PublikacjaWe report on essential properties of materials in the series La0.5Ba0.5Co1-xFexO3-δ as positrodes for proton ceramic electrochemical cells (PCECs). The unit cell and thermochemical expansion coefficient (TCEC) of these cubic perovskites decrease with iron content x, the TCEC of La0.5Ba0.5FeO3-δ going as low as 11·10-6 1/K. The materials behave as LaMO3 perovskites with small band gaps and Ba acting as acceptors compensated by electron...
-
Polymer Materials for U-Shaped Optic Fiber Sensors: A Review
PublikacjaFiber optic sensors have gained popularity over the last few decades. This is due to their numerous advantages, such as good metrological parameters, biocompatibility and resistance to magnetic and electric fields and environmental pollution. However, those built from glass fiber have one main disadvantage—they are fragile, meaning they can be easily damaged, even by the presence of vibration. Due to the great progress made by...
-
Polymer-Enhanced Active Layer Crystallization in Low-Temperature Carbon-Based Perovskite Solar Cells
PublikacjaHigh-efficiency perovskite solar cells (PSCs) are emerging as a promising next-generation, low-cost, photovoltaic technology. A key advantage of PSCs is their compatibility with diverse manufacturing techniques, enabling the pursuit of low-cost, stable PSCs. Carbon electrodes, known for their scalability, chemical inertness, and ease of processing through screen printing, have recently seen the development of low-temperature carbon...
-
Pomoc psychologiczno-pedagogiczna Dz.U.2023 po. 1798 opracowanie Marcin Niedopytalski
PublikacjaPomoc psychologiczno-pedagogiczna w świetle Rozporządzenia Dz.U. 2023 poz. 1798 – analiza i perspektywyAutor: Marcin Niedopytalski Pomoc psychologiczno-pedagogiczna jest jednym z kluczowych elementów wspierania uczniów w polskim systemie edukacji. Rozporządzenie Ministra Edukacji Narodowej z dnia 9 sierpnia 2017 r., w brzmieniu ustalonym jednolitym tekstem opublikowanym w Dzienniku...
-
Porous Deep Eutectic Solvents–Unfulfilled Dream or the Next Breakthrough in Scientific Innovation?
PublikacjaPorous deep eutectic solvents (PDES) are capturing the imagination of scientists, promising a revolutionary leap in material science. These innovative materials, blending the versatility of deep eutectic solvents (DES) with the intricate architectures of porous structures, offer an exciting array of applications—from green chemistry and catalysis to energy storage and environmental remediation. However, the journey from laboratory...
-
Possibility of Using Alkali-Activated Phosphogypsum from the Production of Orthophosphoric Acid for the Building Materials—A Review
PublikacjaThis paper focuses on the possibility of using phosphogypsum, which is a residue from the production of orthophosphoric acid as an additional source of calcium and the use of spent caustic as an alkaline activator for production of ceramic materials in construction industry. The use of the above-mentioned waste will allow to increase fraction of calcium, sodium and silicate needed for the geopolymerization process and improve...
-
Postural Differences in Speaking Versus Non-Speaking Children with Autism Spectrum Disorder
Publikacja -
Potential Modulatory Role of Phoenixin-14 in Epithelial–Mesenchymal Transition of Endometriotic 12Z Cells
Publikacja -
Power Transmission for Millimeter-Wave Indoor/Outdoor Wearable IoT Devices Using Grounded Coplanar Waveguide-Fed On-Body Antenna
PublikacjaThis paper presents for the first-time evaluation of wireless power transmission (WPT) for sustainable low-powered Internet of Things (IoT) devices in realistic indoor/outdoor scenarios using empirical propagation models at 28 GHz. The used empirical propagation models have shown that using an on-body 9×9 mm-wave rectenna array based on a proposed mm-wave antenna is able to charge IoT devices at a distance of 57 m for line-of-sight...
-
Predicting a passenger ship's response during evasive maneuvers using Bayesian Learning
PublikacjaThe rapidly advancing automation of the maritime industry – for instance, through onboard Decision Support Systems (DSS) – can facilitate the introduction of advanced solutions supporting the process of collision avoidance at sea. Nevertheless, relevant solutions that aim to correctly predict a ship's behavior in irregular waves are only available to a limited extent by omitting the impact of wave stochastics on resulting evasive...
-
Procedury reagowania na atak nożownika w obiektach handlowych firmy ochroniarskie
PublikacjaProcedury reagowania na atak nożownika w obiektach handlowych wytyczne dla firm ochroniarskich Ataki...
-
Projekt Integracji Służb i Partnerstwa dla Bezpieczeństwa Narodowego
PublikacjaW obliczu rosnących zagrożeń zarówno na arenie międzynarodowej, jak i wewnętrznej, współczesne...
-
Proyecto Valija, Cala Vila, Ajuntament de Lliria, P/ Major 1 , 46160 Lliria, Valencia Espana
PublikacjaProjekt "Walizka", koncepcja: prof. dr hab. Zbigniew Szot Uniwersytet Artystyczny w Poznaniu, Wydział Malarstwa i Rysunku. W projekcie wzięło udział 48 artystów z Polski oraz z Czech, Niemiec, Gruzji, Japonii. Koncepcja projektu dotyczy szeroko pojętego tematu podróży. W obecnych czasach zagrożenia COVID-19 słowo „podróż” zaczyna nabierać zupełnie innego znaczenia. Żyjąc i tworząc w izolacji od wielu miesięcy, została stworzona...
-
Psychological Determinants of Conflict with the Law and Susceptibility to Rehabilitation in Relation to the Presence of Symptoms of Attention Deficit Hyperactivity Disorder
Publikacja -
Quality Evaluation of Small Features Fabricated by Fused Filament Fabrication Method
PublikacjaThe purpose of this research was to evaluate the quality of small features fabricated by the fused filament fabrication (FFF) method. The samples containing circular and square cross-sections through holes with different dimensions, lengths, and orientation angles were printed from ABS (acrylonitrile butadiene styrene) filament. The adopted optical inspection method allowed us to conduct observations of individual features and...
-
Quality of Consumed Energy as a Key Element in the Development of Processes of Energy Transformation in the European Union Countries
PublikacjaThe process of energy transformation is one of the crucial elements of the process of improvement of the quality of consumed energy. The aim of the research is to assess the European Union countries in terms of the quality of their consumed energy and the speed of adaptation of this aspect of the energy transformation process. We assess the quality of consumed energy by means of the synthetic measure obtained by means of the dynamic...
-
Quantifying of thallium in Shilajit and its supplements to unveil the potential risk of consumption of this popular traditional medicine
Publikacja -
RAGN-R: A multi-subject ensemble machine-learning method for estimating mechanical properties of advanced structural materials
PublikacjaThe utilization of advanced structural materials, such as preplaced aggregate concrete (PAC), fiber-reinforced concrete (FRC), and FRC beams has revolutionized the field of civil engineering. These materials exhibit enhanced mechanical properties compared to traditional construction materials, offering engineers unprecedented opportunities to optimize the design, construction, and performance of structures and infrastructures....
-
RCS Enhancement of Millimeter Wave LTCC Van Atta Arrays With 3-D Printed Lenses for Chipless RFID Applications
PublikacjaIn this paper, we present a new method to enhance the radar- cross section (RCS) of Van Atta arrays which can be used in chipless radio-frequency identification tags operating in millimeter wave frequency bands. Small planar Low-Temperature Co-fired Ceramic (LTCC) Van Atta arrays, that are durable and can operate in harsh environments, are combined with 3-D printed lenses to increase or modify the shape of their RCS by up to 10...
-
Reinventing type 2 immunity in cancer
Publikacja