Filtry
wszystkich: 1184
wybranych: 932
Wyniki wyszukiwania dla: STOPY AL-CU
-
Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
PublikacjaOne of the main challenging issues in friction stir welding (FSW) of stiffened structures is maximizing skin and flange mixing. Among the various parameters in FSW that can affect the quality of mixing between skin and flange is tool plunge depth (TPD). In this research, the effects of TPD during FSW of an Al-Mg-Si alloy T-joint are investigated. The computational fluid dynamics (CFD) method can help understand TPD effects on FSW...
-
Corrosion resistance evaluation of Al-based alloys by means of dynamic electrochemical impedance spectroscopy
PublikacjaW pracy przedstawiono wyniki badań stopów aluminium wykonane za pomocą dynamicznej elektrochemicznej spektroskopii. Na podstawie uzyskanych widm impedancyjnych zostały pokazane zmiany parametrów elektrycznego schematu zastępczego z potencjałem. Stwierdzono, że dodatek magnezu do badanego stopu obniża właściwości przeciwkorozyjne stopu.
-
Wytwarzanie blach bimetalowych al 99,98 -m1e wstępnie łączonych metodą zgrzewania wybuchowego
PublikacjaW artykule omówiono proces wytwarzania blach bimetalowych AL99,8-M1E obejmujący etap łączenia warstw stanowiących wsad bimetalowy oraz etap związany z ich plastycznym kształtowaniem poprzez walcowanie. Przedstawiono i omówiono wpływ parametrów procesu walcowania na nierównomierność odkształcenia warstw stanowiących bimetal.
-
Corrosion resistance evaluation of Al‐based alloys by means of dynamic electrochemical impedance spectroscopy
Publikacja -
Enhancement of defects induced optical nonlinearity in Al: ZnO thin films by electron beam
Publikacja -
Mechanizm zużycia ściernego stopu Al-Si nadtapianego laserowo w niskiej temperaturze.
PublikacjaPrzedstawiono wyniki badań zużycia ściernego przy użyciu tribometru z ruchem posuwisto-zwrotnym oraz wirującej tarczy. Wykazano, że zużycie ścierne nie jest jednoznaczną funkcją parametrów nadtapiania laserowego. Wzrost mocy lasera powoduje wzrost twardości sprzyjający zwiększeniu odporności na zużycie ścierne stopu, ale zarazem także - wzrost chropowatości powierzchni sprzyjający spadkowi odporności.
-
Mechanism of hopping conduction in Be–Fe–Al–Te–O semiconducting glasses and glass–ceramics
PublikacjaElectrical properties of beryllium-alumino-tellurite glasses and glass–ceramics doped with iron ions were studied using impedance spectroscopy. The conductivity was measured over a wide frequency range from 10 mHz to 1 MHz and the temperature range from 213 to 473 K. The D.C. conductivity values showed a correlation with the Fe-ion concentration and ratio of iron ions on different valence states in the samples. On the basis of...
-
Numerical Analysis of Twist Extrusion Pressing of Al-Mg-Mn-Sc-Zr Scalmalloy
Publikacja -
Modelling and optimisation of MXene-derived TiO2/Ti3C2 synthesis parameters using Response Surface Methodology based on the Box–Behnken factorial design. Enhanced carbamazepine degradation by the Cu-modified TiO2/Ti3C2 photocatalyst
PublikacjaIn the present study, a hydrothermal method in a water/ethanol environment was used for the first time to obtain novel Cu/TiO2/Ti3C2 composites with high photocatalytic activity for the degradation of carbamazepine (CBZ) under simulated solar light. The Box–Behnken factorial design was coupled with Response Surface Methodology (RSM) for synthesis parameter optimisation. The effect of different synthesis parameters, including temperature, time...
-
Electronic conduction in (Bi,Pb)–Sr–Ca–Cu–O glass-ceramics
Publikacja -
Metoda zol-żel jako metoda wytwarzania nadprzewodnika LiTi2O4 domieszkowanego Cu
PublikacjaTytanian litu (LiTi2O4) jest materiałem, który, ze względu na właściwości nadprzewodzące, w ostatnich latach stał się obiektem badań naukowych na całym świecie. Dotychczasowe badania pokazały, że wśród wielu domieszek, tylko wprowadzenie jonów miedzi do struktury tytanianu litu powoduje zwiększenie temperatury przejścia w stan nadprzewodzący. W niniejszej pracy opisano procedurę wytwarzania i pomiary próbek tytanianu litu domieszkowanego...
-
Studies of the complex formation between some proton sponges and Cu(II) cations
Publikacja -
Thermoluminescence kinetics of undoped and doped (Ti, Cu, Ce) lithium aluminate crystals
Publikacja -
Radio-photoluminescence of highly irradiated Lif:Mg,Ti and Lif:Mg,Cu,P detectors
Publikacja -
Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials
Publikacja -
Retention of selected heavy metals: Cd, Cu, Pb in a hybrid wetland system
PublikacjaWykonano bilans wybranych metali ciężkich Cd2+, Pb2+, Cu2+ dla pilotowej oczyszczalni hydrofitowej w Przywidzu k. Gdańska. Wykazano m.i. że sorpcja była głównym mechanizmem odpowiedzialnym za usuwanie tych pierwiastków ze ścieków.
-
Copper defects and conductivity in Bi-Pb-Sr-Ca-Cu-O glasses.
Publikacja(Bi0.8Pb0.2) 4Sr3Ca3Cu4Ox częściowo skrystalizowane próbki otrzymano poprzez wygrzewanie szkła w wysokiej temperaturze. Badano je metodą EPR w zakresie temperatur od 4K do 300K. Koncentracja paramagnetycznych centrów Cu2+ zmniejsza się wraz ze wzrostem przewodnictwa elektrycznego i znika po skrystalizowaniu faz nadprzewodzących.
-
Transformation of bimetallic Ag–Cu thin films into plasmonically active composite nanostructures
PublikacjaFormation of plasmonically active silver, copper and composite silver-copper nanostructures were studied in this paper. Metallic nanostructures were fabricated by thermal disintegration, so called dewetting, of the thin films in an argon atmosphere. The formation process of the nanostructures was in-situ observed by a novel method, based on resistance measurements. The influence of the material and thickness of the initial thin...
-
The role of the combined nitrogen-sulfur-carbon cycles for efficient performance of anammox-based systems
PublikacjaThe combined anammox/mixotrophic denitrification process was conducted in two granular sequencing batch reactors (SBRs) during a 200-day operation. Both reactors were fed with synthetic medium, but SBR2 was enriched with additional sulfate (SO4 2 ) which influenced sulfate reduction ammonium oxidation (SRAO) and heterotrophic reduction of SO4 2 by sulfate reducing bacteria. It was hypothesized that the addition of SO4 2 could...
-
Integrating conventional nitrogen removal with anammox in wastewater treatment systems: Microbial metabolism, sustainability and challenges
PublikacjaThe various forms of nitrogen (N), including ammonium (NH4+), nitrite (NO2−), and nitrate (NO3−), present in wastewaters can create critical biotic stress and can lead to hazardous phenomena that cause imbalances in biological diversity. Thus, biological nitrogen removal (BNR) from wastewaters is considered to be imperatively urgent. Therefore, anammox-based systems, i.e. partial nitrification and anaerobic ammonium oxidation (PN/anammox)...
-
Sustainable nitrogen removal in anammox-mediated systems: Microbial metabolic pathways, operational conditions and mathematical modelling
PublikacjaAnammox-mediated systems have attracted considerable attention as alternative cost-effective technologies for sustainable nitrogen (N) removal from wastewater. This review comprehensively highlights the importance of understanding microbial metabolism in anammox-mediated systems under crucial operation parameters, indicating the potentially wide applications for the sustainable treatment of N-containing wastewater. The partial...
-
Optimization of the Aeration Strategies in a Deammonification Sequencing Batch Reactor for Efficient Nitrogen Removal and Mitigation of N2O Production
PublikacjaIn deammonification systems, nitrite-oxidizing bacteria (NOB) suppression and nitrous oxide (N2O) mitigation are two important operational objectives. To carry out this multivariable analysis of response, a comprehensive model for the N cycle was developed and evaluated against experimental data from a laboratory-scale deammonification granular sludge sequencing batch reactor. Different aeration strategies were tested, and the manipulated...
-
Effects of Noncontact Shoulder Tool Velocities on Friction Stir Joining of Polyamide 6 (PA6)
PublikacjaIn this study, the effects of the traverse and rotational velocities of the noncontact shoulder tool on the heat generation and heated flux during the friction stir joining of high-density polyamide 6 (PA6) polymer were investigated. The computational fluid dynamics (CFD) method was employed to simulate the thermomechanical phenomena during the friction stir joining (FSJ) process of PA6. A developed model was used to consider the...
-
Achieving Efficient and Stable Deammonification at Low Temperatures—Experimental and Modeling Studies
PublikacjaThe short-term effects of temperature on deammonification sludge were evaluated in a laboratory-scale sequencing batch reactor (SBR). Mathematical modeling was used for further evaluations of different intermittent aeration strategies for achieving high and stable deammonification performance at decreasing temperatures. As for the biomass cultivated at high temperatures (e.g., 30 C), a higher temperature dependency (the adjusted...
-
Badania defektów w złączach adhezyjnych al/kompozyt węglowy z użyciem mikroskopii ultradźwiękowej
PublikacjaJednym z istotnych czynników decydujących o jakości złączy klejonych jest brak dużych pęcherzy i 'debondingów' w warstwie kleju. W celu wykrycia tych defektów można wykorzystać różne metody. Jedną z nich, przedstawioną w tej pracy do badań złączy adhezyjnych aluminium/kompozyt grafit/żywica epoksydowa, była mikroskopia ultradźwiękowa. Przeprowadzono próby ze sztucznymi wadami w złączu w celu oceny możliwości tej metody nie stosowanej...
-
Powikłania autologicznego przeszczepienia krwiotwórczych komórek macierzystych u pacjentki z układową amyloidozą AL
Publikacja -
Study of impurities in alpha-Al 2 O 3 powders and crystals using EPR spectroscopy
Publikacja -
Mechanizm nanokrystalizacji warstwy wierzchniej stopu Al-Si nadtapianego laserem w niskiej temperaturze.
PublikacjaPrzedstawiono mechanizm nanokrystalizacji stopu aluminium nadtapianego laserowo po schłodzeniu do niskiej temperatury w powiązaniu z obserwacjami struktury warstwy wierzchniej.
-
SESSILE DROPLET CONTACT ANGLE OF WATER-Al2O3, WATER-TiO2 AND WATER-Cu NANOFLUIDS
PublikacjaThe goal of the present work was the experimental determination of the contact angle of droplets of three nanofluids on various substrates. Of particular interest was effect of nanoparticle concentration on droplet contact angle.
-
AUGMENTATION OF THE CRITICAL HEAT FLUX IN WATER-Al2O3, WATER-TiO2 AND WATER-Cu NANOFLUIDS
PublikacjaThe main aim of the proposed study is therefore recognition of the phenomena accompanying nucleate boiling crisis of selected nanofluids during boiling on horizontal tubes of various outside diameters. Of particular interest is impact of contact angle and tube diameter on the value of critical heat flux. The results obtained should give more light on the nature of nucleate boiling crisis and will serve as a basis for future theoretical...
-
Bioaccessibility of Ca, Cu, Fe, Mg, Mn and Zn from commercial bee honeys
Publikacja -
Epigenetic modifications and NF-κB pathway activity in Cu,Zn-SOD-deficient mice
Publikacja -
Wybrane aspekty syntezy materiałów nadprzewodnikowych w układzie Nd-Ce-Cu-O
Publikacjaw artykule dyskutowana jest termodynamiczna stabilność związku Nd(2-x)Ce(x)CuO(4-y)oraz wpływ procesu redukcji na właściwości nadprzewodzące w/w układu.
-
Effects of different defective linkers on the photocatalytic properties of Cu-BTC for overall water decomposition
Publikacja -
Investigation of machinability of Ti–B-SiCp reinforced Cu hybrid composites in dry turning
Publikacja -
Nonlinear optical birefringence in Li2SO4-MgO-P2O5 amorphous system -influence of Cu ions
Publikacja -
Anthropogenic trace metals in Setiu Wetland: Spatial and seasonal distribution and implications for environmental health
PublikacjaThe growing urban wastewater volume poses a major global environmental challenge, especially in developing nations where inadequate treatment and discharge impact clean water availability. This study focused on Setiu Wetland, aiming to analyze seasonal and spatial variations of trace metals in particulate form from anthropogenic and pathogenic sources. Surface water samples were collected from multiple stations, measuring physical...
-
La vera vedova die vivare a Dio, e morire al mondo”. Le aspettative di Bernardino da Siena e Gilberto di Tournai riguardo al comportamento e ai doveri delle vedove,
Publikacja -
Removal of Arsenic from Wastewater Using Hydrochar Prepared from Red Macroalgae: Investigating Its Adsorption Efficiency and Mechanism
PublikacjaArsenic (As) is a prominent carcinogen component produced via both geogenic and anthropogenic processes, posing serious risks to human health. This study aimed to investigate the potential of hydrochar prepared from red macroalgae for removing As from synthetic wastewater. The hydrochar was produced through 5 h hydrothermal carbonization (HTC) treatment at 200 °C, and then, chemically activated with ferric chloride hexahydrate...
-
Combined partial denitrification/anammox process for nitrogen removal in wastewater treatment
PublikacjaRecently, the combined partial denitrification and anammox (PD/anammox) has received special attention as a viable alternative for N removal using organic matter present in municipal wastewater. In comparison with conventional nitrification-denitrification, PD/anammox provides enormous opportunities to achieve sustainable wastewater treatment due to the lack of dissolved oxygen (DO) demand, a smaller amount of organic carbon (C)...
-
ANALYSIS OF THE PROJECT OF INNOVATIVE FLOATING TURBINE
PublikacjaThe design of a floating, innovative device for river water aeration and conversion of mechanical energy to electrical energy required the analysis of a number of geometrical and dynamic features. Such an analysis may be carried out on the basis of existing methods of numerical fluid mechanics. Models of pressures, forces and torques characteristic for the conversion of watercourse energy were developed for two basic concepts of...
-
Wwpływ temperatury suszenia osadów ściekowych na specjację metali ciężkich (Zn, Cu, Cd, Pb) = Influence of thermal drying temperature on heavy metal (Zn, Cu, Cd, Pb) speciation in sewage sludge
PublikacjaPrzedstawiono wpływ temperatury suszenia osadów ściekowych na zmiany specjacji metali ciężkich oraz określono stopień mobilności metali ciężkich w aspekcie ich późniejszego zagospodarowania. Ekstrakcja sekwencyjna metali ciężkich została wykonana wg schematu Tessier'a.
-
Educare le fanciulle al sacramento del matrimonio. Testimonianze di scrittori e predicatori medievali
Publikacja -
Development of an Oxide Layer on Al 6061 Using Plasma Arc Electrolytic Oxidation in Silicate-Based Electrolyte
Publikacja -
Effect of CuO and Al 2 O 3 nanoparticle additives on the tribological behavior of fully formulated oils
Publikacja -
Synergy of the Plastic Treatment HPT and Shot Peening in Aluminium Alloy Al-Mg-Mn-Sc-Zr
Publikacja -
Magnetic Field Influence on the Superconducting Transition in Granular (BiPb)-Sr-Ca-Cu-O Superconductors
Publikacja -
Growth and properties of Ti-Cu films with respect to plasma parameters in dual-magnetron sputtering discharges
Publikacja -
The accumulation of metal (Co, Cr, Cu, Mn and Zn) in freshwater Ulva (Chlorophyta) and its habitat
Publikacja -
Position of LiF:Mg,Cu,P TL peak as an alternative method for ultra-high-dose dosimetry
Publikacja