Search
Filters
total: 3196
filtered: 2190
displaying 1000 best results Help
Search results for: FIXED POINT INDEX
-
Performance properties of rigid polyurethane-polyisocyanurate/brewers’ spent grain foamed composites as function of isocyanate index
PublicationIn the presented work, rigid polyurethane-polyisocyanurate (PUR-PIR) foams filled with brewers’ spent grain (BSG) were prepared. The influence of the isocyanate index (II) on its performance was investigated. Foams obtained with higher isocyanate index required a higher amount of hydrofluorocarbon physical blowing agent to provide the same apparent density of material. An increase of isocyanate index resulted in a slight decrease...
-
Modeling BIM Objects From Point Clouds. Examples
PublicationThe article presents several ways to obtain BIM (Building Information Modeling) models from point clouds using standard commands in Revit 2018. In Revit geometric forms are possible to obtain in project, family or conceptual environments. Efficient modeling requires knowledge of methods of creating families and components in these environments and ways to combine them. Modeling methods with system and loadable families are presented,...
-
FEM simulation of laminate failure in the three point bending
PublicationThe paper presents a FEM simulation of failure of laminate subjected to the three point bending. The numeri-cal model is based on the equivalent single layer approach with 6-paramater non-linear shell theory kinematics. It is implemented in the non-commercial FEM code. The failure initiation is detected with the use of Tsai-Wu criterion. After the failure onset the progressive failure process is modelled through the appropriate...
-
Response of a fiber-optic Fabry-Pérot interferometer to refractive index and absorption changes – modelling and experiments
PublicationThis paper describes how the refractive index and the absorption of investigated substances change the spectrum of the optical radiation at the output of the fiber-optic Fabry-Pérot interferometer. The modeling of the operation of the interferometer takes into account not only the spectra of the refractive index and the absorption of the medium that is inside the cavity, but also spectra of the refractive indices of the core and...
-
Preparation and Characterization of Microsphere ZnO ALD Coating Dedicated for the Fiber-Optic Refractive Index Sensor
PublicationWe report the fabrication of a novel fiber-optic sensor device, based on the use of a microsphere conformally coated with a thin layer of zinc oxide (ZnO) by atomic layer deposition (ALD), and its use as a refractive index sensor. The microsphere was prepared on the tip of a single-mode optical fiber, on which a conformal ZnO thin film of 200 nm was deposited using an ALD process based on diethyl zinc (DEZ) and water at 100 °C....
-
Indeks nazwisk [Index of persons]
Publication -
The Conley index and spectral sequences
Publication -
The E-Cohomological Conley Index, Cup-Lengths and the Arnold Conjecture on T 2n
PublicationWe show that the E-cohomological Conley index, that was introduced by the first author recently, has a natural module structure. This yields a new cup-length and a lower bound for the number of critical points of functionals on Hilbert spaces. When applied to the setting of the Arnold conjecture, this paves the way to a short proof on tori, where it was first shown by C. Conley and E. Zehnder in 1983.
-
3D POINT-CLOUD SPATIAL EXPANSION BY TOTAL LEAST-SQUARES LINE FITTING
PublicationPoint-cloud spatial expansion (PCSE) allows the creation of a new pointcloud form that presents an alternative geometry of an entire object in a single spatial view. Spatial expansion facilitates the analysis process and introduces an additional spatial parameter describing the point cloud. An important element of the PCSE method is determining the position of the axis of symmetry of a symmetrical object: the procedure for determining...
-
Fiber optic microsphere with a ZnO thin film for potential application in a refractive index sensor – theoretical study
PublicationOptical fiber sensors of refractive index play an important role in analysis of biological and chemical samples. This work presents a theoretical investigation of spectral response of a fiber optic microsphere with a zinc oxide (ZnO) thin film deposited on the surface and evaluates the prospect of using such a structure for refractive index sensing. A microsphere is fabricated by an optical fiber tapering method on the base of...
-
Linear Time-Varying Dynamic-Algebraic Equations of Index One on Time Scales
PublicationIn this paper, we introduce a class of linear time-varying dynamic-algebraic equations (LTVDAE) of tractability index one on ar- bitrary time scales. We propose a procedure for the decoupling of the considered class LTVDAE. Explicit formulae are written down both for transfer operator and the obtained decoupled system. A projector ap- proach is used to prove the main statement of the paper and sufficient conditions of decoupling...
-
Interior Point Method Evaluation for Reactive Power Flow Optimization in the Power System
PublicationThe paper verifies the performance of an interior point method in reactive power flow optimization in the power system. The study was conducted on a 28 node CIGRE system, using the interior point method optimization procedures implemented in Power Factory software.
-
Effect of temperature change on refractive index of an egg white and yolk: a preliminary study
PublicationIn this article, the refractive index of an egg white and yolk depending on temperature in range 30 - 47 °C over 1550 nm was determined. The measurement head was constructed as fiber optic Fabry-Perot interferometer with interference between polished fiber end-face and aluminum weighing dish. The measurement setup has been made of an optical spectrum analyzer, a superluminescent diode with a central wevelength of 1550 nm, 2:1 fiber...
-
Fixed roof to shell connection in tank with an internal floating cover.
PublicationReferat dotyczy projektowania połączenia dachu stałego zbiornika walcowego z płaszczem w przypadku zastosowania wewnętrznego przekrycia pływającego. Zaproponowano zastosowanie dodatkowego pierścienia usztywniającego, zabezpieczającego górną krawędź płaszcza zbiornika. Wyniki analiz z zastosowaniem metody elementów skończonych zamieszczono w formie map naprężeń.
-
Comparison of Downdraft and Updraft Gasification of Biomass in a Fixed Bed Reactor
PublicationThe aim of this study was to compare and analyze the gasification process of beech wood. The experimental investigation was conducted inside a gasifier, which can be operated in downdraft and updraft gasification system. The most important operating parameter studied in this paper was the influence of the amount of supply air on the temperature distribution, biomass consumption and syngas calorific value. The results show that...
-
Analysis of the KZK equation solution for fixed pressure distributions at the piston
PublicationPraca dotyczy zagadnienia oddziaływania fal o dużej amplitudzie, generowanych przez przetwornik kołowy o gaussowskim rozkładzie ciśnienia. Model matematyczny zbudowano w oparciu o równania KZK. Do rozwiązania zagadnienia zastosowano metodę różnic skończonych. Badano zmiany ciśnienia fal różnych częstotliwości w obrębie wiązki akustycznej. Wyniki obliczeń numerycznych porównano z odpowiednimi rozwiązaniami analitycznymi
-
Dynamics near nonhyperbolic fixed points or nontransverse homoclinic points
Publication -
The point estimate method in a reticulated shell reliability analysis
PublicationThe objective of this paper is to present an application of the point estimate method (PEM) that can determine the probabilistic moments for engineering structures. The method is reasonably robust and adequately accurate for a wide range of practical problems. It is a special case of numerical quadrature based on orthogonal polynomials. The main advantage of this method is that, unlike FORM or SORM, it is not necessary to carry...
-
Influence of Asphalt Binder on the Compactability of Asphalt Mixtures Using Locking Point
PublicationCompaction is an important process for the asphalt mixture service life. A properly compacted mixture is crucial for long-lasting pavement. The objective of this study was to evaluate the influence of asphalt binders on the compactability of the asphalt mixtures by utilizing the concept of the locking point. To achieve this objective, two compaction methods (impact and gyration), different temperatures and asphalt content, and...
-
Millimeter Wave Negative Refractive Index Metamaterial Antenna Array
PublicationIn this paper, a novel negative refractive index metamaterial (NIM) is developed and characterized. The proposed metamaterial exhibits negative effective permittivity (εeffe) and negative effective permeability (µeffe) at millimeter wave frequency of 28GHz. This attractive feature is utilized to enhance the gain of a microstrip patch antenna (MPA). Two thin layers of 5 5 subwavelength unit cell array of NIM are placed above a...
-
Properties of nano-Fe3O4 incorporated epoxy coatings from Cure Index perspective
PublicationThe mission of an advanced epoxy-based nanocomposite coating is to provide a given substrate with protection against an unwelcome guest; e.g. corrosive molecules/media, environmental stress, flame, thermal degradation or microorganisms. In such systems, the degree to which superior properties can be guaranteed depends on the state of network formation in the epoxy in the presence of nanoparticles. For low-filled epoxy nanocomposite coatings,...
-
Cure Index demonstrates curing of epoxy composites containing silica nanoparticles of variable morphology and porosity
PublicationAn image was taken by Cure Index on curability of epoxy with silica nanoparticles having variable morphology and porosity. Three kinds of silica nanoparticles with non-porous curved-rod, non-porous spherical, and mesoporous spherical microstructures were synthesized and characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy (SEM) and Brunauer–Emmett–Teller analyses. Epoxy nanocomposites containing...
-
Comparison of 3D Point Cloud Completion Networks for High Altitude Lidar Scans of Buildings
PublicationHigh altitude lidar scans allow for rapid acquisition of big spatial data representing entire city blocks. Unfortunately, the raw point clouds acquired by this method are largely incomplete due to object occlusions and restrictions in scanning angles and sensor resolution, which can negatively affect the obtained results. In recent years, many new solutions for 3D point cloud completion have been created and tested on various objects;...
-
Stakeholders Satisfaction Index as an Important Factor of Improving Quality Management Systems of Universities in Poland Stakeholders Satisfaction
PublicationThe following article analyses selected methods of assessing the quality of educational services of universities and discusses the role of stakeholders in, required by law, quality assurance and quality management systems according to Common Assessment Framework for education. Furthermore, it presents the Stakeholders Satisfaction Index (SSI) which is an original proposal of an aggregate measure of satisfaction perceived by stakeholders....
-
Doped Nanocrystalline Diamond Films as Reflective Layers for Fiber-Optic Sensors of Refractive Index of Liquids
PublicationThis paper reports the application of doped nanocrystalline diamond (NCD) films—nitrogen-doped NCD and boron-doped NCD—as reflective surfaces in an interferometric sensor of refractive index dedicated to the measurements of liquids. The sensor is constructed as a Fabry–Pérot interferometer, working in the reflective mode. The diamond films were deposited on silicon substrates by a microwave plasma enhanced chemical vapor deposition...
-
Numerical solution of fractional neutron point kinetics in nuclear reactor
PublicationThis paper presents results concerning solutions of the fractional neutron point kinetics model for a nuclear reactor. Proposed model consists of a bilinear system of fractional and ordinary differential equations. Three methods to solve the model are presented and compared. The first one entails application of discrete Grünwald-Letnikov definition of the fractional derivative in the model. Second involves building an analog scheme...
-
The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites
PublicationThe structure and performance of polyurethane (PU) foams are strongly driven by the stoichiometry of the polyaddition reaction, quantitatively described by the isocyanate index. It determines the balance between isocyanate and hydroxyl groups in the reacting system and is affected by the introduction of additional functionalities originated, e.g., from applied fillers. Nevertheless, this issue is hardly taken into account in research...
-
Adapting the pinch point analysis to improve the ORC design process
PublicationPinch point analysis can be adapted so as to assist in the early stages of designing the ORC systems. Typically used in determining the working parameters of heat exchangers, it can be employed to improve the heat fitting between the source of heat and the working fluids of the ORC system. To attain the parametric match, an algorithm was built enabling quick estimation of the possible heat reception by the specific working fluid....
-
Laboratoryjny przetwornik a/c typu "floating-point" na bazie karty DAQ
PublicationW artykule przedstawiono zrealizowany przetwornik a/c typu "floating-point" na bazie karty akwizycji danych typu PCI-6221 uzupełnionej o wzmacniacz wejściowy o programowanym wzmocnieniu. Opisywany przetwornik jest podstawą ćwiczenia w laboratorium studenckim. W skład ćwiczenia wchodzą dodatkowo program symulacyjny pozwalający zapoznać się z ideą pracy przetworników typu "floating-point", a następnie przejść do realizacji przetwornika...
-
4-Point beam tensile test on a soft adhesive
PublicationAn adhesive butt joint with a soft bondline has been studied. A series of experiments was conducted on test pieces constituted of aluminium adherends bonded with a low modulus epoxy adhesive, ScotchWeld™ 2216. The joint was subjected to four point bending, in tension/compression loading, under constant deflection rate, with the bondline being parallel to the applied load. The objective was to examine and evaluate crack nucleation...
-
Multiple solutions of indefinite elliptic systems via a Galerkin-type Con- ley index theory
PublicationW pracy wykazano prawdziwość hipotezy Angenenta i van der Vorsta dotyczącąilości rozwiązań pewnego układu eliptycznego. Liczbę rozwiazań szacuje się zdołu przy pomocy niezmiennika topologicznego zwanego uogólnionym indeksemMorse`a. W dowodzie stosuje sie niezmienniczy index Conleya w przestrzeniachHilberta.
-
Conley type index and hamiltonian inclusions
PublicationOpisano definicję i własności indeksu dla zbiorów niezmienniczych wielowartościowego układu dynamicznego w nieskończenie-wymiarowej przestrzeni Hilberta. Podano nowe przykłady zastosowań do twierdzeń o istnieniu nietrywialnych rozwiązań okresowych układów hamiltonowskichz prawą stroną niegładką.
-
Sources of Return in the Index Futures Markets
Publication -
Model of heat transfer in the stagnation point of rapidly evaporating microjet
PublicationThe paper presents investigation into the single water microjet surface cooling producing evaporating film. Reported tests were conducted under steady state conditions. Experiments were conducted using the nozzle size of 70 and 100 mikrometer respectively. In the course of investigations obtained were experimental relations between heat flux and wall superheating. It was proved that the phenomenon is similar to that of pool boiling...
-
UAV-Based Hyperspectral Ultraviolet-Visible Interpolated Reflectance Images for Remote Sensing of Leaf Area Index
PublicationDespite its relation to a number of environmental parameters, ultraviolet (UV) reflectance is rarely used in remote sensing. In this study, we investigate the applicability of UV-vis reflectance for vegetation monitoring with unmanned aerial vehicles (UAV). We measure point reflectance over the study area using a UAV-borne spectrometer, project the points onto the Earth's surface, and interpolate them to obtain continuous reflectance...
-
Multilevel inverter neutral-point voltage sensor diagnostic based on the Extended Kalman Filter
PublicationA new algorithm for neutral point voltage imbalance estimation in DC link of the three-level (3L) neutral point clamped (NPC) voltage source inverter (VSI) is proposed. Application of the proposed algorithm does not require any additional sensors. The unbalanced voltage calculation is based on the information derived from the inverter output measured currents and from the knowledge of the load model parameters. In order to estimate...
-
Postquarter-Point Case of Ship’s Side-Berthing and Its Influence on Marine Fender Pitch
PublicationThis paper presents a critical analysis of some selected codes and practical recommendations used as basic rules in the design procedures of modern marine fender systems. The first part of the discussion pertains to the existing equations used in calculating the eccentricity coefficient in the ship’s kinetic energy equation and the maximum allowable fender pitch (spacing) in a set of fenders installed along a quay wall. A new approach...
-
From a Point Cloud to a 3D Model - an Exercise for Users of AutoCAD and Revit
PublicationThe paper presents a proposal of the topic of an exercise for students of building faculties as part of classes on 3D modelling. The task consists in creating a three-dimensional model based on the measurement obtained with the Leica P30 laser scanner. Due to the maximum number of points in the cloud in the presented programs, the output files must be properly cleared and reduced. The point cloud was pre-processed in Cyclone software....
-
Methods for quality improvement of multibeam and LiDAR point cloud data in the context of 3D surface reconstruction
PublicationPoint cloud dataset is the transitional data model used in several marine and land remote-sensing applications. During further steps of processing, the transformation of point cloud spatial data to more complex models containing higher order geometric structures like edges and facets may be possible, if an appropriate quality level of input data is provided. Point cloud datasets usually contain a considerable amount of undesirable...
-
Protection of Earthing Reactor Connected to the Star Point of a High Voltage Shunt Reactor
PublicationThe article presents the problem of protection of earthing reactors connected to the star point of shunt reactors in high voltage lines, with particular regard to the detection of internal faults. Model analyses for an actual system commissioned in 2015, which is intended to be provided with earthing reactors, are included.
-
The Numerical Comparison of Heat Transfer in a Coated and Fixed Bed of an Adsorption Chiller
Publication -
Underground Water Level Prediction in Remote Sensing Images Using Improved Hydro Index Value with Ensemble Classifier
PublicationThe economic sustainability of aquifers across the world relies on accurate and rapid estimates of groundwater storage changes, but this becomes difficult due to the absence of insitu groundwater surveys in most areas. By closing the water balance, hydrologic remote sensing measures offer a possible method for quantifying changes in groundwater storage. However, it is uncertain to what extent remote sensing data can provide an...
-
ZnO coated fiber optic microsphere sensor for the enhanced refractive index sensing
PublicationOptical fiber-based sensors are expected to become key components in the control of industrial processes,and the tuning and the enhancement of their sensing properties are crucial for the further developmentof this technology. Atomic Layer Deposition (ALD), a vapor phase technique allowing for the deposition ofconformal thin films, is particularly suited for the deposition of controllable thin films on challenging sub-strates....
-
Processing of LiDAR and Multibeam Sonar Point Cloud Data for 3D Surface and Object Shape Reconstruction
PublicationUnorganised point cloud dataset, as a transitional data model in several applications, usually contains a considerable amount of undesirable irregularities, such as strong variability of local point density, missing data, overlapping points and noise caused by scattering characteristics of the environment. For these reasons, further processing of such data, e.g. for construction of higher order geometric models of the topography...
-
Fractional neutron point kinetics equations for nuclear reactor dynamics – Numerical solution investigations
PublicationThis paper presents results concerning numerical solutions to a fractional neutron point kinetics model for a nuclear reactor. The paper discusses and expands on results presented in (Espinosa-Paredes et al., 2011). The fractional neutron point kinetics model with six groups of delayed neutron precursors was developed and a numerical solution using the Edwards’ method was proposed (Edwards et al., 2002). The mathematical model...
-
Assessing historical church tower asymmetry using point cloud spatial expansion
PublicationChurch towers are key cultural heritage. In theory, towers are vertical, while facade elements are symmetrically positioned around the tower axis. However, during service of a structure, building and lifetime conditions cause deviations, with associated risks. Laser scanning point clouds can be used to assess the structural state but a universal approach was missing. The proposed algorithm first estimates the tower inclination,...
-
Photovoltaic Maximum Power Point Technique based on Incremental Conductance (INCON) control algorithm
PublicationMaximum output power status can significantly improve the deployment rate of solar energy system. In order to get the maximum power output, issue of tracking maximum power point (MPP), reduced harmonics around MPP and improve efficiency of the solar power energy system, this paper presents the improved maximum power point tracking (MPPT) control...
-
Evaluation of the Combination of Muscle Energy Technique and Trigger Point Therapy in Asymptomatic Individuals with a Latent Trigger Point
Publication -
A Cost-Effective Method for Reconstructing City-Building 3D Models from Sparse Lidar Point Clouds
PublicationThe recent popularization of airborne lidar scanners has provided a steady source of point cloud datasets containing the altitudes of bare earth surface and vegetation features as well as man-made structures. In contrast to terrestrial lidar, which produces dense point clouds of small areas, airborne laser sensors usually deliver sparse datasets that cover large municipalities. The latter are very useful in constructing digital...
-
Attractors of dissipative homeomorphisms of the infinite surface homeomorphic to a punctured sphere
PublicationA class of dissipative orientation preserving homeomorphisms of the infinite annulus,pairs of pants, or generally any infinite surface homeomorphic to a punctured sphere isconsidered. We prove that in some isotopy classes the local behavior of such homeomor-phisms at a fixed point, namely the existence of so-called inverse saddle, impacts thetopology of the attractor — it cannot be arcwise connected