Filters
total: 1259
filtered: 893
-
Catalog
Chosen catalog filters
Search results for: PIN-ON-DISC MACHINE
-
The effect of an active force while slide diamond burnishing of wooden shafts upon process quality
PublicationThe quality of the surface of wooden elements that have been turned and burnished has got a crucial meaning in the whole production process flow, since the obtained effects affect the quality of the wooden surface after finishing (coating, painting). In the paper, selected results of the investigation of the effect of the burnishing process on the surface quality of the elements after turning are presented. Research experiments...
-
Raman modular system with fibre-optic probes for remote monitoring of CVD process
PublicationW pracy opisano konstrukcję modułowego spektroskopu ramanowskiego umożliwiającego monitorowanie wzrostu warstw w procesach CVD. Przedstawiono rezultaty testów skostruowanego układu oraz wstępne wyniki pomiarów warstw diamentowych.
-
Wpływ jakości pomiarów eksploatacyjnych bloków energetycznych na wyznaczanie symptomów niesprawnej pracy
PublicationW pracy opisano jedną z metod zminimalizowania błędów pomiarowych pojawiających się przy funkcyjnym wyznaczaniu wzorca sprawnej pracy obiektów energetycznych dużej mocy. Zajęto się problemem oceny jakości pomiarów związaną z występującą koniecznością okresowych wymian czujników pomiarowych ze względu na ich rozkalibrowywanie eksploatacyjne. Przedstawiono obliczenia symulacyjne wpływu takich wymian na niepewność wyznaczania wzorca...
-
Ocena bezpieczeństwa statku w czasie katastrofy na morzu
PublicationW pracy przedstawiono podstawowe charakterystyki statku w stanie uszkodzonym. Omówiono metody oceny bezpieczeństwa statków w stanie uszkodzonym. Przedstawiono proponowaną metodę oceny bezpieczeństwa statku w stanie uszkodzonym wraz z procedurą możliwą do wykorzystania w warunkach operacyjnych. Opisano całościowy model ryzyka wypadku.
-
Diagnostyka obiektów przemysłowych z wykorzystaniem wspólnej magistrali usług DIAGNOSTIC SERVICE BUS DSB
PublicationKorzystając ze znanego pojęcia magistrali, w pracy przedstawia się sposób przystosowania i wykorzystania magistrali usług w systemie diagnostyki obiektów przemysłowych. Koncepcja takiego środka komunikacyjnego opiera się na architekturze SOA (z architekturą zorientowanej na usługi). Koncepcja ta stanowi metodę rozwiązania problemów wydajnościowych rozwijanego projektu pt. "Sieciowy Monitor Obiektu" (SMO). Wspólna szyna danych zwiększa...
-
Metody sprzęgania modeli dynamiki rurociągów przemysłowych
PublicationArtykuł opisuje dwie metody sprzęgania modeli dynamiki rurociągów przesyłowych. Stanowią one niezbędny element przy budowie efektywnych systemów symulacji rozległych i złożonych instalacji rurociągów stosowanych w przemyśle. Pierwsza z proponowanych metod (globalna metoda sprzęgania - GMS) wykorzystuje 'globalne' (w skali modelu) zależności (oraz fizyczne przybliżone zależności) pomiędzy ciśnieniem i przepływem masowym medium w...
-
Intensywność skażenia grafitu w żeliwie sferoidalnym niestopowym docieranym luźnym ścierniwem.
PublicationPrzedstawiono wyniki badań skażenia powierzchni żeliwa sferoidalnego niestopowego docieranego luźnym ścierniwem. Ta wada docierania materiałów miękkich lub zawierających składniki o niskiej twardości ma istotne znaczenie zarówno ze względów technologicznych jak i eksperymentalnych. W przeprowadzonych eksperymentach skażenia grafitu wykorzystano mikroskopy skaningowe i mikroanalizę rentgenowską powierzchniową.
-
Ocena ryzyka kruchego pękania wspomaganego przez wodór złączy spawanych stali okrętowej o wysokiej wytrzymałości
PublicationOceniano podatność na niszczenie wodorowe stali 14HNMBCu (S690Q) o wysokiej wytrzymałości i jej połączeń spawanych przy obciążeniu monotonicznie rosnącym oraz stałym w wodzie morskiej. Badania przeprowadzono w powietrzu, oraz w środowisku wody morskiej przy potencjale korozyjnym i przy polaryzacji katodowej. W próbie rozciągania z małą prędkością odkształcenia próbek gładkich jako mierniki podatności na kruchość wodorową przyjęto:...
-
Przyczyny pękania wspomaganego przez wodór rozdzielaczy paliwa w silnikach okrętowych
PublicationWykorzystano badania skłonności stali 26H2MF i 34HNM do niszczenia środowiskowego przy rozciąganiu próbek ze stałą małą prędkością, przy obciążeniu stałym dla próbek z karbem oraz przy obciążeniu cyklicznie zmiennym w środowiskach paliwa kotłowego i przepracowanego oleju mineralnego. Obserwowano szybkie pękanie stali w badaniach zmęczeniowych, niewielką utratę plastyczności w próbach statycznego rozciągania oraz brak efektu w próbie...
-
Badania i modelowanie degradacji materiałów pod wpływem oddziaływania czynników mechanicznych i korozyjnych
PublicationOpisano formy niszczenia materiałów pod łącznym działaniem czynników mechanicznych i korozyjnych. Dokonano przeglądu metod stosowanych do badań degradacji materiałów poddanych działaniu naprężeń w środowisku korozyjnym. Przedstawiono przykłady badań modelowych procesów niszczenia wodorowego, korozji naprężeniowej i zmęczenia korozyjnego.
-
Morfologia napawanych warstw na bazie kobaltu po utlenianiu i korozji w gazach spalinowych
PublicationPrzedmiotem badań były warstwy wytworzone z proszku na bazie kobaltu, napawane laserowo i plazmowo na przylgnie zaworów wylotowych silników Diesla. Dla wszystkich warstw stwierdzono dobrą jakość, brak pęknięć i jednorodność struktury na powierzchni. Badania degradacji wykonano w specjalnie wykonanej komorze w gazach spalinowych silnika okrętowego. Badania napoin przeprowadzono po 2 miesiącach ekspozycji w podwyższonej temperaturze...
-
Zastosowanie metody analizy obrazu w określaniu odporności kawitacyjnej materiałów
PublicationPrzedstawiono optyczną metodę określania właściwości kawitacyjnych materiału oraz charakterystyki kawitacyjnej stanowiska przy zastosowaniu komputerowej analizy obrazu erodowanej powierzchni uzyskanego w mikroskopie świetlnym.
-
Charakterystyka kawitacyjna laserowo obrabianych napoin Fe-Cr-Mn
PublicationPrzedstawiono badania odporności kawitacyjnej napoin Fe-Cr-Mn w dwóch przypadkach: bez dodatkowej obróbki powierzchniowej oraz po przetapianiu powierzchni napoiny wiązką lasera CO2 o mocy 1000W. Oceniano głębokość i stopień umocnienia warstwy wierzchniej.
-
Wpływ automatycznej kalibracji wizyjnego systemu pozycjonowania na dokładność lokalizacji elementu roboczego
PublicationW artykule przedstawiono strukturę i działanie automatycznego wizyjnego systemu pozycjonowania (PVS), który został zainstalowany na maszynie waterjet (WJ). Ponadto przeprowadzono analizę wpływu kalibracji na działanie PVS. Podstawę systemu stanowią dwie kamery internetowe zamontowane na przemysłowej maszynie WJ. W połączeniu z algorytmem identyfikacji, system przeznaczony jest do pozycjonowania WJ z dużą dokładnością. W tym celu...
-
Comparative analysis of spectral and cepstral feature extraction techniques for phoneme modelling
PublicationPhoneme parameter extraction framework based on spectral and cepstral parameters is proposed. Using this framework, the phoneme signal is divided into frames and Hamming window is used. The performances are evaluated for recognition of Lithuanian vowel and semivowel phonemes. Different feature sets without noise as well as at different level of noise are considered. Two classical machine learning methods (Naive Bayes and Support...
-
An optimal abstraction model for hardware multithreding in modern processor architectures.
PublicationPrzegląd technologii implementacji wątków sprzętowych. Propozycja abstrakcji maszyny wirtualnej SIMD (On-Demand Virtual Single Instruction Multiple Data machine) do optymalnego użycia wątków sprzętowych.
-
Sandwich Biobattery with Enzymatic Cathode and Zinc Anode Integrated with Sensor
PublicationCarbon paper covered with side-naphthylated multi walled carbon nanotubes was used as the conducting support for the construction of a biocathode in a hybrid biofuel cell. Laccase Carrena unicolor enzyme was employed as the catalyst for the 4e reduction of oxygen and a zinc disc covered with hopeite was used as the anode. Derivatized carbon nanotubes increase the working surface of the electrode and provide direct contact with...
-
Feedback Control of Multiphase Induction Machines with Backstepping Technique
PublicationThe paper presents the control possibility of five phase induction machines. In the proposed solution the machine model vector form is not transformed to the (dq)-coordinate system, that is connected to rotor flux vector, but utilizes the stationary system ( αβ ). Moreover, the nonlinear model linearization is based on demonstrated nonlinear variables transformation for i-orthogonal ( αβ )(n) planes. By introducing the backstepping...
-
Better polynomial algorithms for scheduling unit-length jobs with bipartite incompatibility graphs on uniform machines
PublicationThe goal of this paper is to explore and to provide tools for the investigation of the problems of unit-length scheduling of incompatible jobs on uniform machines. We present two new algorithms that are a significant improvement over the known algorithms. The first one is Algorithm 2 which is 2-approximate for the problem Qm|p j = 1, G = bisubquartic|Cmax . The second one is Algorithm 3 which is 4-approximate for the problem Qm|p...
-
Research on Tool Temperature Dependence on Lapping Grains Size
PublicationCommonly used as a finishing operation, lapping has been used for achieving ultra-high finishes and close tolerances between mating pieces. Its carried out by applying loose abrasive grains between work and lap surfaces, and causing a relative motion between them resulting in a finish of multi-directional lay. The grains activity (sliding and rolling) in the working gap causes not only the material removal but also the temperature...
-
Asking Data in a Controlled Way with Ask Data Anything NQL
PublicationWhile to collect data, it is necessary to store it, to understand its structure it is necessary to do data-mining. Business Intelligence (BI) enables us to make intelligent, data-driven decisions by the mean of a set of tools that allows the creation of a potentially unlimited number of machine-generated, data-driven reports, which are calculated by a machine as a response to queries specified by humans. Natural Query Languages...
-
A Measurement-Based Approach for Speed Control of Induction Machines
PublicationThis paper presents an approach to design a measurement-based controller for induction machines. The proposed control approach is motivated by the fact that developing an appropriate mechanical model of such induction machines is a challenging task. Since our proposed control methodology is only on the basis of measured data, the controller design does not require any information about the model of the mechanical part. The control...
-
Uczenie maszynowe do samoorganizacji systemów rozproszonych w zastosowaniach gospodarczych
PublicationW pracy omówiono uczenie maszynowe do samoorganizacji systemów rozproszonych w zastosowaniach gospodarczych ze szczególnym uwzględnieniem sieci neuronowych do predykcji finansowych oraz szacowania ratingu przedsiębiorstw. Oprócz sieci neuronowych, istotną rolę w przygotowaniu i testowaniu informatycznych systemów finansowych może pełnić programowanie genetyczne. Z tego powodu omówiono uczenie maszynowe w aplikacjach konstruowanych...
-
Obserwatory prędkości dla bezczujnikowego sterowania maszynami prądu przemiennego
PublicationPrzedstawiono model matematyczny uogólnionej maszyny elektrycznej rozszerzony przez wprowadzenie dodatkowych zmiennych. Na podstawie modelu rozszerzonego opracowano strukturę obserwatora prędkości maszyny uogólnionej. Zaprezentowano struktury obserwatorów prędkości dla poszczególnych rodzajów maszyn prądu przemiennego. Pokazano, że prędkość kątową wirnika można odtwarzać dla różnych typów maszyn stosując odpowiednie zmienne stanu...
-
Tribological Properties of Ni-P/Si3N4 Nanocomposite Layers Deposited by Chemical Reduction Method on Aluminum Alloy AW-7075
PublicationThe article presents the results of tribological tests of Ni-P/Si3N4 nanocomposite and Ni-P nickel layers deposited on the AW-7075 aluminum alloy by chemical reduction method, and the AW-7075 alloy without coating. Nanocomposite layers were produced using Si3N4 siliconnitride in the form of a polydisperse powder whose particle sizes ranged from 20 to 25 nm. The influence of the content of the dispersion phase layer material on...
-
Roller burnishing
PublicationThe paper shows the process of roller burnishing as a method of finishing machine components. Based on own research the author presents the effects of the roller burnishing process to increase the hardness and residual stress as well as the wear and fatigue strength of burnishing components.
-
Human Feedback and Knowledge Discovery: Towards Cognitive Systems Optimization
PublicationCurrent computer vision systems, especially those using machine learning techniques are data-hungry and frequently only perform well when dealing with patterns they have seen before. As an alternative, cognitive systems have become a focus of attention for applications that involve complex visual scenes, and in which conditions may vary. In theory, cognitive applications uses current machine learning algorithms, such as deep learning,...
-
Category-Based Workload Modeling for Hardware Load Prediction in Heterogeneous IaaS Cloud
PublicationThe paper presents a method of hardware load prediction using workload models based on application categories and high-level characteristics. Application of the method to the problem of optimization of virtual machine scheduling in a heterogeneous Infrastructure as a Service (IaaS) computing cloud is described.
-
Miniature reconfigurable antenna
PublicationThis work concerns the design of a miniature, low-profile reconfigurable antenna based on Huygens metamaterial sources for frequency f0 = 2.45 GHz. Two planar Huygens sources were designed consisting of near-field resonators. Sources are excited from a specially designed reconfigurable control system. Thanks to the two PIN diodes, the system can realize two cardioid radiation characteristics with...
-
Static Shape and Stress Control of Trusses with Optimum Time, Actuators and Actuation
PublicationTraditional shape and stress control of structures use many actuators and require enormous time to find reasonable solutions that need designers to input specific target displacement and stress. This study employs a linear technique to static shape and stress control of pin-jointed assemblies as a theoretical advancement to prior works and provides a comparative analysis against previously established works. The study evaluates...
-
Non-Linear Analysis of Structures Utilizing Load-Discretization of Stiffness Matrix Method with Coordinate Update
PublicationThis paper proposes a stiffness method based structural analysis algorithm for geometrically non-linear structures. In this study, the applied load on the joints has been discretized to a sequence of a few loadings applied. Each loading step produces incremental external nodal displacements, which are added to the corresponding coordinates to get a new geometrical shape of the structure. This process is iteratively repeated until...
-
From Linear Classifier to Convolutional Neural Network for Hand Pose Recognition
PublicationRecently gathered image datasets and the new capabilities of high-performance computing systems have allowed developing new artificial neural network models and training algorithms. Using the new machine learning models, computer vision tasks can be accomplished based on the raw values of image pixels instead of specific features. The principle of operation of deep neural networks resembles more and more what we believe to be happening...
-
Lessons learned from developing an Industry 4.0 mobile process management system supported by Artificial Intelligence
PublicationResearch, development and innovation (RDI) projects are undertaken in order to improve existing, or develop new, more efficient products and services. Moreover, the goal of innovation is to produce new knowledge through research, and disseminating it through education and training. In this line of thinking, this paper reports and discusses the lessons learned from the undertaken project, regarding three areas: machine learning...
-
Identification and non-integer order modelling of synchronous machines operating as generator
PublicationThis paper presents an original mathematical model of a synchronous generator using derivatives of fractional order. In contrast to classical models composed of a large number of R-L ladders, it comprises half-order impedances, which enable the accurate description of the electromagnetic induction phenomena in a wide frequency range, while minimizing the order and number of model parameters. The proposed model takes into account...
-
Investigation of the Effect of The Temperature and Magnetization Pattern on Flux Density, Instantaneous Torque, Unbalanced Magnetic Forces of a Surface Inset PMM
PublicationElectrical machines utilized in domestic applications such as ceiling fans should have low losses and cost. Permanent magnets are used instead of rotor excitation to reduce losses. Therefore, not only the losses of the rotor winding are eliminated, but also the efficiency of the machine is increased. A surface inset consequent pole (SICP) machine has also been used to reduce costs. Because less magnets are utilized in this structure....
-
A subdomain model for armature reaction field and open‐circuit field prediction in consequent pole permanent magnet machines
PublicationIn this paper, the machine quantity, such as electromagnetic torque, self and mutual inductances, and electromotive force, is analytically calculated for non-overlapping winding consequent pole slotted machine for open-circuit field and armature reaction. The sub-domain approach of (2-D) analytical model is developed using Maxwell's equations and divide the problem into slots, slot-openings, airgap and magnets region, the magnet...
-
Zagadnienia tribologiczne w hamulcu silnika hydraulicznego
PublicationPrzedmiotem badań był prototypowy hamulec cierny wielopłytkowy do silnika satelitowego SM-0,6 o teoretycznej objętości roboczej 16,7 cm3/obr. Hamulec ten zbudowany był z 27 tarcz ciernych wykonanych z materiału TOLOX oraz z pakietu sprężyn talerzowych zamontowanych w układzie X. Zablokowanie hamulca następuje w skutek siły docisku pakietu sprężyn talerzowych płytek ciernych co następuje w chwili spadku ciśnienia w komorze tłoka...
-
Comparative Analysis of Text Representation Methods Using Classification
PublicationIn our work, we review and empirically evaluate five different raw methods of text representation that allow automatic processing of Wikipedia articles. The main contribution of the article—evaluation of approaches to text representation for machine learning tasks—indicates that the text representation is fundamental for achieving good categorization results. The analysis of the representation methods creates a baseline that cannot...
-
Quantumness in Diagnostics of Marine Internal Combustion Engines and Other Ship Power Plant Machines
PublicationThe article provides proof that the diagnostics of marine internal combustion engines and other ship power plant machines should take into account the randomness and unpredictability of certain events, such as wear, damage, the variations of mechanical and thermal loads, etc., which take place during machine operation. In the article, the energy E, like the other forms (methods) that it can be converted into (heat and work), is...
-
Semantic rules representation in controlled natural language in FluentEditor
PublicationThis paper presents a way of representation of semantic rules (SWRL) in controlled English in order to facilitate understanding the rules by humans interacting with a machine. This approach (implemented in FluentEditor) may be applied in many domains, where the understandability of the rules used to support a decision process is of great importance.
-
A review on analytical models of brushless permanent magnet machines
PublicationThis study provides an in-depth investigation of the use of analytical and numerical methods in analyzing electrical machines. Although numerical models such as the finite-element method (FEM) can handle complex geometries and saturation effects, they have significant computational burdens, are time-consuming, and are inflexible when it comes to changing machine geometries or input values. Analytical models based on magnetic equivalent...
-
Badania tribologicznych właściwości nanokompozytowych warstw Ni-P/Si3N4 osadzanych metodą redukcji chemicznej na stopie aluminium AW-7075
PublicationPrzedstawiono wyniki tribologicznych badań warstw nanokompozytowych Ni-P/Si3N4 i niklowych Ni-P osadzonych na stopie aluminium AW-7075 metodą redukcji chemicznej, a także stopu AW-7075 bez powłoki. Warstwy nanokompozytowe wytworzono, stosując azotek krzemu Si3N4 w postaci polidyspersyjnego proszku o wielkości cząstek 20–25 nm. Analizowano wpływ zawartości w materiale warstwy fazy dyspersyjnej na twardość i zużycie ścierne, którą...
-
Processing, Performance Properties, and Storage Stability of Ground Tire Rubber Modified by Dicumyl Peroxide and Ethylene-Vinyl Acetate Copolymers
PublicationIn this paper, ground tire rubber was modified with dicumyl peroxide and a variable content (in the range of 0–15 phr) of ethylene-vinyl acetate copolymers characterized by different vinyl acetate contents (in the range of 18–39 wt.%). Modification of ground tire rubber was performed via an auto-thermal extrusion process in which heat was generated during internal shearing of the material inside the extruder barrel. The processing,...
-
Hydrographic echosounder for sounding inland waters.
PublicationNowy model echosondy zaprojektowanej specjalnie dla instytucji administrującymi śródlądowymi drogami wodnymi, sztucznymi i naturalnymi zbiornikami oraz morskimi wodami przybrzeżnymi jest opisany. Podstawowym wymogiem wynikającym z sondażu wód płytkich jest pomiar możliwie najmniejszych głębokości. Przez zastosowanie oddzielnych przetworników (nadawczego i odbiorczego) i ich wytłumienie oraz przez wprowadzenie układu TVG o dużej...
-
Review of the Complexity of Managing Big Data of the Internet of Things
PublicationTere is a growing awareness that the complexity of managing Big Data is one of the main challenges in the developing feld of the Internet of Tings (IoT). Complexity arises from several aspects of the Big Data life cycle, such as gathering data, storing them onto cloud servers, cleaning and integrating the data, a process involving the last advances in ontologies, such as Extensible Markup Language (XML) and Resource Description...
-
Multimedia interface using head movements tracking
PublicationThe presented solution supports innovative ways of manipulating computer multimedia content, such as: static images, videos and music clips and others that can be browsed subsequently. The system requires a standard web camera that captures images of the user face. The core of the system is formed by a head movement analyzing algorithm that finds a user face and tracks head movements in real time. Head movements are tracked with...
-
Analysis of the Capability of Deep Learning Algorithms for EEG-based Brain-Computer Interface Implementation
PublicationMachine learning models have received significant attention for their exceptional performance in classifying electroencephalography (EEG) data. They have proven to be highly effective in extracting intricate patterns and features from the raw signal data, thereby contributing to their success in EEG classification tasks. In this study, we explore the possibilities of utilizing contemporary machine learning algorithms in decoding...
-
Facial Feature extraction from a monochromatic picture
PublicationFace pose determination represents an important area of research in Human Machine Interaction. In this paper, I describe a new method of extracting facial feature locations from a single monochromatic monocular camera for the purpose of estimating and tracking the three dimensional pose of human face and eye-gaze direction.
-
Facial feature extraction from a monochromatic picture.
PublicationFace pose determination represents an important area of research in Human Machine Interaction. In this paper, I describe a new method of extracting facial feature locations from a single monochromatic monocular camera for the purpose of estimating and tracking the three dimensional pose of human face and eye-gaze direction.
-
Artificial Neural Networks as an architectural design tool- generating new detail forms based on the Roman Corinthian order capital
PublicationThe following paper presents the results of the research in the field of the machine learning, investigating the scope of application of the artificial neural networks algorithms as a tool in architectural design. The computational experiment was held using the backward propagation of errors method of training the artificial neural network, which was trained based on the geometry of the details of the Roman Corinthian order capital....