Search
Filters
total: 466
filtered: 406
Search results for: Compliance with Restrictions
-
HYDROGEN PRODUCTION PERFORMANCE IN THERMOCATALYTIC REACTOR BASED ON THE INTERMETALLIC PHASE OF NI3AL
PublicationThe main aim of the following paper is mathematical modelling for momentum, heat and mass transfer, which is accompanied by chemical surface reactions of the flow of the mixture helium and methanol. The thermocatalytic devices used for decomposition of hydrocarbons incorporate vertical microchannels coupling at the ends and heated to 500 oC at the walls. The results of the experiment were compared with CFD calculations to calibrate...
-
Decision-Making Models of the Human-Operator as an Element of the Socio-Technical Systems
PublicationThe authors of the chapter proved that the fundamental intellectual processes, which lie on the basis of decision-making behavior of the human-operator, could be identified on the bases on the analogies with the devices (elements). The basic intellectual processes of the Rational decision-making models can be adequately identified by the transient processes of the PID-controller; the intellectual processes of the Bounded Rationality...
-
Model of the double-rotor induction motor in terms of electromagnetic differential
PublicationThe paper presents a concept, a construction, a circuit model and experimental results of the double-rotor induction motor. This type of a motor is to be implemented in the concept of the electromagnetic differential. At the same time it should fulfill the function of differential mechanism and the vehicle drive. One of the motor shafts is coupled to the direction changing mechanical transmission. The windings of the external rotor...
-
Evolutionary Sets of Safe Ship Trajectories: improving the method by adjusting evolutionary techniques and parameters
PublicationThe paper presents some of the evolutionary techniques used by the evolutionary sets of safe ship trajectories method. In general, this method utilizes a customized evolutionary algorithm to solve a constrained optimization problem. This problem is defined as finding a set of cooperating trajectories (here the set is an evolutionary individual) of all the ships involved in the encounter situation. The resulting trajectories are...
-
An analytical approach to determine the health benefits and health risks of consuming berry juices
PublicationFood products composition analysis is a prerequisite for verification of product quality, fulfillment of regulatory enforcements, checking compliance with national and international food standards, contracting specifications, and nutrient labeling requirements and providing quality assurance for use of the product for the supplemen- tation of other foods. These aspects also apply to the berry fruit and berry juice. It also must...
-
Overview of Knowledge Management in Occupational Safety, Health, and Ergonomics
PublicationOccupational safety, health, and ergonomics (OSHE) are strategic pillars of contemporary organizations. In order to provide safer workplace, it is vital to manage the organizational knowledge, so that effective decision making along with absolute compliance to standards can be executed. The critical challenge for OSHE in modern industry is management of existing individual knowledge (experience), structure knowledge, and organizational...
-
Airborne and mobile laser scanning in measurements of sea cliffs on the southern Baltic
PublicationMeasurements of sea cliffs performed using periodic surveying based on laser scanning is currently one of the fastest and most accurate solutions. Supported with the technology of satellite measurements using GNSS (Global Navigation Satellite System) positioning and photographic measurements with the use of aerial vehicle, they enable an effective monitoring of the sea cliffs affected by the erosion. In case of the coast of southern...
-
Globalne trendy w certyfikacji systemu zarządzania środowiskowego
PublicationMinimalizacja wpływu działalności organizacji na środowisko naturalne jest jednym z najważniejszych założeń strategicznych przedsiębiorstw. Działania te wynikają z wdrażania strategii CSR, która w odniesieniu do polityki środowiskowej w organizacjach realizowana jest poprzez system EMAS bądź wymagania normy ISO 14001. Wdrożenie Systemu Zarządzania Środowiskowego, a następnie poddanie systemu certyfikacji przez niezależną jednostkę...
-
DESIGN AND CONSTRUCTION OF TILTED WALLS IN ACCORDANCE WITH CODES' PROVISIONS ON THE EXAMPLE OF THE CONSTRUCTION OF THE MUSEUM OF THE SECOND WORLD WAR IN GDAŃSK
PublicationThe purpose of this article was to introduce the design and construction of tiled walls in accordance to codes' restrictions. The construction of the Museum of the Second World War in Gdańsk was chosen to be an example of its successful use in practice. Theoretical knowledge was based on PN-EN 1992-1-1:2008 and fib Model Code for Concrete Structures 2010. Although codes' recommendations seem curt, practice prove structural advance....
-
Child-Robot Interaction Studies During COVID-19 Pandemic
PublicationThe coronavirus disease (COVID-19) pandemic affected our lives deeply, just like everyone else, the children also suffered from the restrictions due to COVID-19 affecting their education and social interactions with others, being restricted from play areas and schools for a long time. Although social robots provide a promising solution to support children in their education, healthcare, and social interaction with others, the precautions...
-
Energy Modeling of Single-Family Houses in the Conceptual Phase
PublicationThe aim of the article is to identify the potential impact of the latest commercial digital tools for building energy analysis on the everyday architectural practice in Poland in the context of typology and energy optimization of single –family houses. The reason for this survey is that “architect friendly” interfaces simulation results’ visualization and energy analysis tools are not given deserved attention in the architectural...
-
Improving SBR Performance Alongside with Cost Reduction through Optimizing Biological Processes and Dissolved Oxygen Concentration Trajectory
PublicationAuthors of this paper take under investigation the optimization of biological processes during the wastewater treatment in sequencing batch reactor (SBR) plant. A designed optimizing supervisory controller generates the dissolved oxygen (DO) trajectory for the lower level parts of the hierarchical control system. Proper adjustment of this element has an essential impact on the efficiency of the wastewater treatment process as well...
-
Overview of the three multicriteria approaches applied to a global assessment of analytical methods
PublicationCritical and global evaluation of analytical methods should be one of the primary goals in analytical chemistry. A holistic approach, however, requires a look at the varied features: commonly discussed validation criteria, often underrated practical and economic aspects, and typically overlooked compliance with the principles of green analytical chemistry. Carrying out such an assessment in a critical and transparent way is extremely...
-
Mathematical modeling of hydrogen production performance in thermocatalytic reactor based on the intermetallic phase of Ni3Al
PublicationThe main goal of the following work is to adjust mathematical modelling for mass transfer, to specific conditions resulting from presence of chemical surface reactions in the flow of the mixture consisting of helium and methanol. The thermocatalytic devices used for decomposition of organic compounds incorporate microchannels coupled at the ends and heated to 500 oC at the walls regions. The results of the experiment were compared...
-
The Smith-Watson-Topper parameter and fracture surface topography relationship for additively manufactured 18Ni300 steel subjected to uniaxial variable-amplitude loading
PublicationIn this paper, the association between Smith-Watson-Topper (SWT) parameter and fracture surface topography is studied in additively manufactured maraging steel exposed to variable-amplitude fatigue loading. The post-failure fracture surfaces were examined using a non-contact 3D surface topography measuring system and the entire fracture surface method. The focal point is on the correspondence between fatigue characteristics, articulate...
-
Extending GQM by argument structures
PublicationEffective metrics definition methods are of particular importance, as measurement mechanisms are indispensable in virtually any engineering discipline. The paper describes how the well known Goal-Question-Metric (GQM) method of systematic metrics derivation from measurement goals can be extended by applying argument structures. The proposed approach is called Goal-Argument-Metric (GAM). We briefly introduce general ideas of GQM...
-
Thermodynamic and geometrical characteristics of mixed convection heat transfer in the shell and coil tube heat exchanger with baffles
PublicationThe article presents passive heat transfer enhancement method in the form of baffles to increase the energy efficiency of the shell coil heat exchanger. Conducted literature review shows that, despite numer- ous studies, there is little work on the intensification of heat transfer at the shell side. Most of the work focuses on the impact of geometrical parameters of the coil itself. This article successfully proves that it is possible...
-
Study on effectiveness of PVC/β-diketone sorbent in removing residue of Zn(II), Cr(III) and Ni(II) from post-galvanic wastewater
Publication -
The application of acetylacetone for the separation of heavy metals in roadside soil belts by extraction methods
Publication -
The recovery and the separation of metal ions from galvanic wastewaters
Publication -
The Influence of Alkyl Chain Length and Steric Effect on the Stability Constants and Extractability of Co(II) Complexes with 1-Alkyl-2-Methylimidazoles
Publication -
Studies on the separation of some transition metals using trialkylimidazole as selective extractant
Publication -
The application of membrane extraction in the separation of zinc and cadmium ions
Publication -
Studies of the aromatic β-diketones as extractant of copper ions
Publication -
Solvent extraction of copper ions by 3-substituted derivatives of β-diketones
Publication -
Characterization of PVC-based polymer inclusion membranes with phosphonium ionic liquids
Publication -
Sorption of Cu(II), Zn(II) and Pb(II) Ions in an Aqueous Solution on the PVC-Acetylacetone Composites
Publication -
Space and spatial practices in times of confinement. Evidence from three European countries: Austria, France and Poland
PublicationIn the first half of 2020, millions of people were subjected to drastic restrictions aimed at limiting the spread of the Covid-19 disease. Austria, France and Poland have implemented a lockdown to varying degrees and for varying lengths of time. This is an unprecedented situation in Europe: until now, even in times of war, curfew measures have never been applied 24 h a day. The research presented in this article was carried out...
-
Cooperation of mono- and bi-articular muscles: human lower limb
PublicationObjectives: The aim of this study was to create and analyze a Pareto-optimal problem that would describe cooperation between mono- and bi-articulate lower limb muscles in sagittal plane. Methods: Equations describing the problem were derived and analyzed, additional constrains were introduced and experimental verification based on gait video analysis was performed. Results: Uncertainty of Pareto-optimal solution is shown for the...
-
Lighting requirements for pedestrian crossings - positive contrast
PublicationFor many years now in Poland there has been a large number of road accidents at pedestrian crossings during night periods [5, 11]. One of the technical solutions that can improve this condition is the use of proper lighting for pedestrian crossings. The designated pedestrian crossing should be visible in different weather conditions and at different times of the day. In case of night vision restrictions use artificial lighting...
-
Striving for spatial energy efficiency in dwelling complexes. Kształtowanie przestrzennej efektywności energetycznej w zespołach zabudowy mieszkaniowej.
PublicationThe main aim of this article was to discover the key characteristics in shaping most rewarded eco- district complexes built respectively in temperate climate zone in respect to spatial energy efficiency and resilience principles. It was done through careful case studies, comparative analysis and juxtaposition of critical parameters related to spatial energy efficiency and resilience in chosen representative dwelling complexes....
-
ESG investing during the Covid-19 crisis. Evidence from Central European Stock Exchanges
PublicationAs COVID-19 turned into a global pandemic, world markets gradually began to recover after initial dynamic declines. Restrictions, and their subsequent loosening, were, and are, not without significance for the financial markets. These particular circumstances provide a unique opportunity to contribute to the literature by focusing on the potential resilience of ESG (environmental, social and governance) investing in an era of crisis....
-
Improvements to the STEAM-based teaching of architectural drawing
PublicationThe author of this article presents a systemic approach to improving the teaching of architectural drawing courses for engineers in the 21st Century. In this era of rapid development of digital technologies, the traditional teaching structure should be redefined to a purpose-oriented dynamic model. The existing, generally accepted teaching models have already proved successfully based on the practice-oriented STEAM programme, which...
-
UWARUNKOWANIA I SKUTKI ŻYWIOŁOWEJ SUBURBANIZACJI W POLSCE. CZY OPANOWANIE JEJ JEST MOŻLIWE?
PublicationArtykuł dotyczy procesu żywiołowej suburbanizcji (urban sprawl) w Polsce. Jego celami są: (1) analiza powiązań między negatywnymi skutkami tego procesu, (2) prezentacja negatywnych skutków dla transportu i zużycia energii oraz ładu przestrzennego, (3) analiza sposobów przeciwdziałania negatywnym procesom, w tym uwarunkowań (w szczególności ograniczeń) stosowania tych sposobów i ich skuteczności. Jako metody zastosowano: obserwację,...
-
Development of Local IDF-formula Using Controlled Random Search Method for Global Optimization
PublicationThe aim of the study is to present the effective and relatively simple empirical approach to rainfall Intensity-Duration-Frequency-formulas development, based on Controlled Random Search (CRS) for global optimization. The approach is mainly dedicated to the cases in which the commonly used IDF-relationships do not provide satisfactory fit between simulations and observations, and more complex formulas with higher number of parameters...
-
Analytical and legislative challenges of sewage sludge processing and management
PublicationThis article presents the most popular methods of sewage sludge management and analytical techniques which could be a powerful tool in designing new sewage sludge management methods. Chemical analysis is also described as a vital point at the subsequent stages of technological processes control and sewage sludge quality assessment. It is also an instrument essential to maintaining control of processed sewage sludge introduced to...
-
Stiffness assessment of the laminate recovered from end-of-life wind turbine blade
PublicationIn the paper the stiffness parameters of the laminate recovered from an aerodynamic shell of a decommissioned wind turbine blade are evaluated. The aim of the work is to assess selected methods for identifying material data, as well as to estimate the level of stiffness degradation during turbine operation. Several practical identification methods are presented and compared. Two concepts of a single laminate layer are considered,...
-
Automatic Detection of Nerves in Confocal Corneal Images with Orientation-Based Edge Merging
PublicationThe paper presents an algorithm for improving results of automatic nerve detections in confocal microscopy images of human corneal. The method is designed as a postprocessing step of regular detection. After the nerves are initially detected, the algorithms attempts to improve the results by filling unde-sired gaps between single nerves detections in order to correctly mark the entire nerve instead of only parts of it. This approach...
-
Pure cross-anisotropy for geotechnical elastic potentials
PublicationThe pure cross-anisotropy is understood as a special scaling of strain (or stress). The scaled tensor is used as an argument in the elastic stiffness (or compliance). Such anisotropy can be overlaid on the top of any elastic stiffness, in particular on one obtained from an elastic potential with its own stress-induced anisotropy. This superposition does not violate the Second Law. The method can be also applied to other functions...
-
Prototype design and development of low-load-roof photovoltaic modules for applications in on-grid systems
PublicationFour prototypes of lightweight photovoltaic modules for applications in on-grid systems have been designed, developed, manufactured and tested for compliance with relevant IEC standards. Selected, commercially available materials characterized by thermogravimetry, differential scanning calorimetry, dilatometry, scanning electron microscopy and nanoindentation technique were used in frameless, adhesively-bonded sandwich-structures...
-
New Approaches for Escherichia coli Genotyping
PublicationEasy-to-perform, fast, and inexpensive methods of differentiation of Escherichia coli strains beyond the species level are highly required. Herein two new, original tools for genotyping of E. coli isolates are proposed. The first of the developed method, a PCR-RFLP (polymerase chain reaction-restriction fragment length polymorphism) test uses a highly variable fliC gene, encoding the H antigen as a molecular target. The designing...
-
Security-oriented agile approach with AgileSafe and OWASP ASVS
PublicationIn this paper we demonstrate a security enhancing approach based on a method called AgileSafe that can be adapted to support the introduction of OWASP ASVS compliant practices focused on improving security level to the agile software development process. We also present results of the survey evaluating selected agile inspired security practices that can be incorporated into an agile process. Based on the survey’s results, these...
-
Optymalizacja i walidacja metody ADSRRS-fingerprinting - konstrukcja zestawu diagnostycznego do różnicowania genetycznego drobnoustrojów
PublicationSpośród wszystkich metod typowania mikroorganizmów na szczególną uwagę zasługują metody oparte na analizie całego materiału genetycznego zawartego w komórce. Jedną z nich jest stosunkowo nowa technika ADSRRS-fingerprinting (ang. Amplification of DNA Fragments Surrounding Rare Restriction Sites). Na podstawie naszych badań można stwierdzić, iż charakteryzuje się ona wysokim potencjałem różnicującym, wiarygodnością, powtarzalnością...
-
ADSRRS-fingerprinting and PCR MP techniques for studies of intraspecies genetic relatedness in Staphylococcus aureus
PublicationW pracy pokazano użyteczność dwóch nowych metod do typowania molekularnego Staphylococcus aureus, ADSRRS-fingerprinting (Amplification of DNA fragments Surrounding Rare Restriction Sites) i PCR MP (PCR melting profile). Przebadano 37 szczepów Staphylococcus aureus izolowanych od pacjentów z czyracznością. Jako metodę referencyjną zastosowano REA-PFGE. Okazało się, że izolaty Staphylococcus aureus z nosa od niektórych pacjentów...
-
How to fund an additional secular function in the monumental church?
PublicationThe implementation of a new public function into the non-used church spaces like attics or cellars in context of revitalizing a lawfully protected historical city areas have diversified aspects. The article describes the financial aspect of adaptation of omitted spaces of monumental sacral buildings by presenting funding possibilities in the European Union countries available in period of 2017-2018 and the funds planned for the...
-
Benefit of the doubt approach to assessing the research performance of Australian universities
PublicationThis paper proposes a benefit of the doubt (BoD) approach to assess the research performance of 37 public Australian universities based on data from 2015. The primary activities of Higher Education institutions are teaching and research, but the prestige of a university depends mainly on the results of its research activities. The BoD method is rooted in the data envelopment analysis methodology, which enables the flexible and...
-
COMPOSITE FOOTBRIDGE - SYNERGY EFFECT IN COOPERATION BETWEEN UNIVERSITIES AND INDUSTRY
PublicationPaper presents conditions of science and industry cooperation in Poland (restrictions, barriers, good practice). A key role in initiation of collaboration between units has financial support. What is also important, it is much easier to create innovative solutions on the base of combining the potential of individuals. That is why many countries all over the world look for innovative solutions using budget funds to support grants...
-
Model of the Internet mortgage market optimization
PublicationThe Internet mortgages are currently a fast growing market, allowing selling mortgages cheaper andfaster than in the traditional methods such as in bank departments.Given the specificity of selling mortgages in the Internet, banks try to sell more mortgages by spendingmore money on advertising and paying higher commission to the brokers selling their products. It is important tooptimise the amounts of money in both sectors (the...
-
Comparison of 3D Point Cloud Completion Networks for High Altitude Lidar Scans of Buildings
PublicationHigh altitude lidar scans allow for rapid acquisition of big spatial data representing entire city blocks. Unfortunately, the raw point clouds acquired by this method are largely incomplete due to object occlusions and restrictions in scanning angles and sensor resolution, which can negatively affect the obtained results. In recent years, many new solutions for 3D point cloud completion have been created and tested on various objects;...
-
Assessment of the Feasibility of Energy Transformation Processes in European Union Member States
PublicationThe energy transition is now treated in most countries as a necessary condition for their long-term development. The process of energy transformation assumes the simultaneous implementation of the Sustainable Development Goals, which are a major challenge for modern economies and introduce significant restrictions in their functioning. Our study aims to group EU member states according to their ability to achieve energy transition...