Filters
total: 844
filtered: 510
-
Catalog
Chosen catalog filters
Search results for: Trust in Scientists
-
Identification of Leaf Rust Resistance Genes in Selected Wheat Cultivars and Development of Multiplex PCR
Publication -
Tilting pad thrust bearing with novel material selection - experimental comparison of low and medium speed operation
PublicationThe advances in material engineering led to the development of hard carbon based coatings applied in numerous applications in order to prevent or minimize wear of the parts in contact. With Triondur® coatings, the bearing company Schaeffler has succeeded in halving the friction losses in the valve trains of passenger cars. The coatings are optimized for high abrasive wear protection and low sliding friction moments. Altogether...
-
Evaluation of apparent Young׳s modulus of the composite polymer layers used as sliding surfaces in hydrodynamic thrust bearings
PublicationHydrodynamic bearings with a polymer sliding layer are able to operate in severe conditions, mainly due to favorable properties of the polymers. The goal of this research was to evaluate apparent Young׳s modulus of two types of the polymer composite layers used for sliding surfaces in hydrodynamic bearings, as a function of temperature. The Young׳s modulus was evaluated on the basis of compression tests carried out on samples obtained...
-
Comparison of non-linear statical analysis of truss with linear and rotational side supports and 3d roof model
PublicationIn the paper geometrically non-linear analysis of example truss with linear and rotational elastic side supports is compared with geometrically non-linear analysis of part of the roof construction with purlins and truss-bracing. For different stiffness of side-supports a non linear relation between normal force in compressed chord due to out of truss plane displacement has been calculated.
-
Experimental research on a hydrodynamic thrust bearing with hydrostatic lift pockets: Influence of lubrication modes on bearing performance
PublicationThe aim of the study is to investigate the performance of a thrust bearing equipped with hydrostatic lift pockets under different lubrication modes. Three types of flat land bearing lubrication modes are studied experimentally: hydrostatic lubrication (HS; forced oil injection to the pockets), hybrid lubrication (HS + HD; hydrostatic lubrication combined with the external forced bearing oil supply) and hydrodynamic lubrication...
-
Case Study of Old Steel Riveted Railway Truss Bridge: From Material Characterization to Structural Analysis
PublicationThe structural analysis of an old steel riveted railway truss bridge located over the Maruska River on the Działdowo – Olsztyn, Poland railway line is performed in this paper to check its behaviour under today’s railway loads. The mechanical properties of construction steel extracted from the old steel bridge are investigated by tensile tests, impact tests through the Charpy pendulum impact V-notch, and an optical emission spectrometer....
-
Experimental study on the feasibility of alternative materials for tilting pad thrust bearings operating in transition to mixed friction
PublicationIn hydrodynamic bearings traditional bearing alloys: Babbitts and bronzes are most frequently utilized. Polymer sliding layers are sometimes applied as a valuable alternative. Hard diamond-like carbon (DLC) coatings, which are also considered for certain applications may show some advantages, as well. Although material selection is of secondary importance in a full film lubrication regime it becomes important in mixed friction...
-
Impact of active intra-complex rest intervals on post-back squat versus hip thrust jumping potentiation
Publication -
Influence of nodes with positive eccentricity on load-carrying capasity of truss' top chords in trusses made of welded cold-formed members.
PublicationIn order to establish the influence of eccentric crossing of truss members on the load-carrying capacity of the folded chord of a hat-section truss, a research model was created and preliminary numerical analysis of the truss was performed with the use of Marc Mentat programme. Distorial instability of crossheads caused by deviation of loose (unmounted) channel section web’s bends was observed. Due to the slenderness of the section’s...
-
EXPERIMENTAL STUDY OF DIFFERENT SUPPLY DESIGNS IN HYDRODYNAMIC THRUST BEARINGS = Badania doświadczalne różnych sposobów smarowania wzdłużnych łożysk ślizgowych
PublicationHydrodynamiczne łożyska wzdłużne charakteryzują się znacznymi stratami tarcia, które przyczyniają się do wzrostu temperatury łożyska i obniżenia jego nośności. Obecnie olej smarujący jest zazwyczaj chłodzony w zewnętrznych układach chłodzenia. Po schłodzeniu olej jest dostarczany z powrotem do korpusu łożyska, z reguły do przestrzeni między klockami łożyska. Skuteczność dostarczania schłodzonego oleju w pobliże wlotu do szczeliny...
-
Centrally Pivoted Tilting Pad Thrust Bearing with Carbon-Based Coated Collar—Experimental Results of Low- and Medium-Speed Operation
PublicationExperimental results of the research on a tilting pad thrust bearing with symmetrical pad support in the conditions of high loads and low speeds are presented in the paper. As described in the literature review, experimental results of tilting pad bearings at low speed/high load regime and transient conditions are rare. Unusual material selection - steel pad against a DLC-type coating on the collar was utilized. Such material combination...
-
Analiza przepływu oleju przez rowek smarowy wzdłużnego łożyska ślizgowego = Analysis of the lubricant flow through the hydrodynamic thrust bearings groove
PublicationSmarowanie zanurzeniowe jest tradycyjnym sposobem smarowania wzdłużnych łożysk ślizgowych. Jednak rozwiązanie to wykazuje umiarkowaną skuteczność w zapewnieniu optymalnie niskich temperatur w filmie smarowym a ponadto jest przyczyną strat mocy związanych z mieszaniem oleju w obudowie łożyska, co jest szczególnie widoczne w łożyskach szybkoobrotowych. Wymagania stawiane nowym konstrukcjom łożysk ślizgowych to zwiększanie nośności...
-
Wpływ odkształceń tarczy oporowej wału na właściwości hydrodynamicznego łożyska wzdłużnego = Influence collar deformations of hydrodynamic thrust bearing performance
PublicationPodjęto próbę określenia możliwego wpływu deformacji termosprężystej tarczy oporowej łożyska na jego cechy. Porównano wyniki trzech wariantów obliczeń TEHD: bez uwzględniania deformacji tarczy, z uwzględnieniem deformacji tylko sprężystych oraz z uwzględnieniem deformacji termosprężystych tarczy oporowej.
-
Detekcja uszkodzeń w kratownicy kompozytowej z zastosowaniem fal giętno-scinających.Damage detection in composite truss by application coupled flexural - shearwaves.
PublicationW pracy przedstawiono zastosowanie fal spręzystych do detekcji peknięć w kratownicy kompozytowej.
-
Wpływ założeń modelu obliczeniowego na wyniki obliczeń hydrodynamicznych łożysk wzdłużnych = The influence of model simplifications on the predicted performance of hydrodynamic thrust bearings
PublicationPrzedstawiono porównanie wyników obliczeń hydrodynamicznych łożysk wzdłużnych otrzymanych z wykorzystaniem dwóch niezależnie opracowanych modeli obliczeniowych TEHD (termoelastohydrodynamicznych). Wykorzystane w obliczeniach programy różnią się głównie założeniami i uproszczeniami przyjętymi, zwłaszcza w odniesieniu do części przepływowej zadania. Symulacje obliczeniowe przeprowadzono stosując w przypadku obu modeli te same warunki...
-
Obliczeniowa analiza wybranych systemów dostarczania smaru w hydrodynamicznych łożyskach wzdłużnych = Computational analysis of selected supply designs in hydrodynamic thrust bearings
PublicationPrzedstawiono przykładowe wyniki obliczeniowej analizy wpływu zastosowania wybranych systemów dostarczania schłodzonego oleju do łożyska na właściwości łożyska.
-
Portico Farmhouses of the Vistula Delta: Architecture, Current State and Finite Element Modelling of Timber Roof Truss under Material and Cross-section Uncertainty
PublicationThe article focuses on the oldest surviving I-type portico houses located in the Vistula Delta, which were built in the 17th and 18th centuries. The study describes the houses’ origins, structure, details of roof structures and technical condition, and it also includes numerical modelling of a roof truss and its mechanical analysis. Numerical models of the roof trusses are defined and analysed by means of the finite element method....
-
From hobbies, straightforward analysis to serious research – the road to phd degree
PublicationThe illustration of the main articles goal is an example of author's academic career course, the aim of which is to obtain a doctoral degree in the field of geodesy and cartography. Today, the most important thing for the young scientist is the devotion to research in certain field of science, which is interested for the large community of scientists. From a psychological point of view, a unity of interest and experiments must...
-
Ocena wybranych własności materiałowych polimerowej warstwy ślizgowej hydrodynamicznego łożyska wzdłużnego = An estimation of selected material properties of the hydrodynamic thrust bearing polymer lining
PublicationZaprezentowano metody pomiaru najważniejszych własności mechanicznych i cieplnych polimerowego pokrycia segmentowego łożyska wzdłużnego, do których zaliczyć należy moduł sprężystości wzdłużnej oraz współczynnik przewodności cieplnej materiału dodatkowym utrudnieniem planowanego zadania jest fakt, że próbka do badań dostępna będzie jedynie w formie wycinka z segmentu łożyskowego, z tego powodu nie jest możliwe zastosowanie ogólnie...
-
Modelowanie kratownicy z kształtowników giętych na zimno z mimośrodami dodatnimi w węźle = Modelling of truss with cold-formed section and positive eccentricyty in the node.
PublicationThe topic of this research is establishing load-carrying capacity of compressed and tensed chords of trusses made of cold-formed open cross-sections. Occurrence of bending in the truss’ chord is the result of specific production technology assumed by the designer and producer of lattice girder’s systems. The aim of this research is to present methodology of conduct while creating numerical models that best depict the behaviour...
-
Identification of leaf rust resistance genes Lr34 and Lr46 in common wheat (Triticum aestivum L. ssp. aestivum) lines of different origin using multiplex PCR
Publication -
Experimental investigation of performance and emission characteristics of a miniature gas turbine supplied by blends of kerosene and waste tyre pyrolysis oil
PublicationFossil fuels are non-renewable sources of energy that could be depleted in the near future, giving rise to amajor energy crisis. Scientists from all over the world are working on new technologies to produce fuelnot only from renewable sources but also from waste. This article is concerned with: (i) waste tyremanagement by means of the pyrolysis process, (ii) investigation of physico-chemical parameters ofwaste tyre pyrolysis oil...
-
Level and trend uncertainties of Kyoto relevant greenhouse gases in Poland.W: IIASA Home page. Mid-Summer Workshop of Young Scientists Summer Program. 18-19 July 2002, Laxenburg, Austria. Laxenburg: Int. Inst. Applied Syst.** 2002. Dostępny z Internetu: http://www.iiasa.ac.at IIASA - Publications Catalog [s. 1-38, 1 rys. 13 tab. bibliogr. 27 poz.] Poziom i trend niepewności oszacowania emisji gazów cieplarnianych w Polsce
PublicationScharakteryzowano metody określania niepewności szacowania emisji gazów cie-plarnianych z różnych źródeł. Wykonano badania i skomentowano wyniki.
-
Collaborative approach to trustworthiness of it infrastructures
PublicationArtykuł wprowadza koncepcję ''trust case'' i wyjaśnia jak jest ona używana w celu uzasadnienia zaufania do systemów i infrastruktur IT. W szczególności skoncentrowano się na procesie budowy trust case, wyjasniono jego strukturę oraz podkreślono konieczność włączenia do procesu właściwych udziałowców. Załączono również informację na temat funkcjonalnej struktury narzedzi wspomagających zarządzanie trust case w ramach jego cyklu...
-
Analiza przepływu oleju przez rowek smarowy wzdłużnego łożyska ślizgowego z wykorzystaniem komputerowej dynamiki płynów (CFD) = Analysis of the lubricant flow through the hydrodynamic thrust bearings groove with the use of computational fluid dynamic
PublicationSmarowanie zanurzeniowe jest tradycyjnym sposobem smarowania wzdłużnych łożysk ślizgowych. Jednak rozwiązanie to wykazuje umiarkowaną skuteczność w zapewnieniu optymalnie niskich temperatur w filmie smarowym a ponadto jest przyczyną strat mocy związanych z mieszaniem oleju w obudowie łożyska, co jest szczególnie widoczne w łożyskach szybkoobrotowych. Obecnie wymagania stawiane nowym konstrukcjom łożysk ślizgowych to zwiększanie...
-
Buckling and shape control of prestressable trusses using optimum number of actuators
PublicationThis paper describes a method to control the nodal displacement of prestressable truss structures within the desired domains. At the same time, the stress in all members is unleashed to take any value between the allowable tensile stress and critical buckling stress. The shape and stresses are controlled by actuating the most active members. The technique considers the members’ initial crookedness, residual stresses, and slenderness...
-
Social Differentiation of the Perception and Human Tissues Donation for Research Purposes.
PublicationThe willingness to donate human biological material for research purposes is shaped by socio-cultural factors; however, there is a lack of studies analysing the social perception of different human tissues, which may affect such willingness. This study aimed to distinguish different sociocultural categories of human tissues and types of potential donors based on their willingness to donate material. Quantitative research was...
-
Komitet Chemii Analitycznej PAN i jego działalność : Historia i dzień dzisiejszy
PublicationIn the contemporary society analytical chemistry as a scientific discipline and its practical application, termed often ;analysis'', has many important aims, and its role still increases. The Committee, formed in 1955 as a Commission, during several decades has coordinated and supported the activity of Polish analytical chemists on the national and international fields. Its present role includes organization of conferences and...
-
Defending against Fake VIP in Scant-Transparency Information Systems with QoS Differentiation
PublicationIn client-server information systems with quality of service (QoS) differentiation, Client may deplete Server’s resources by demanding unduly high QoS level. Such QoS abuse has eluded systematic treatment; known defenses using Client authorization, payments, or service request inspection prior to QoS assignment, are heuristic and environment-specific. We offer a game-theoretic approach on the premise that a service request is occasionally...
-
In Search of Naval Beauty. Historical Study of Ship Architecture
PublicationDesigning ships is no mean achievement. In the old days, constructors focused on making their ships visually appealing, while paying scant regard to the living conditions of the crew. Such an approach reflected the state of the art in ship building at the time as well as the social order prevalent in those days. A breakthrough came no earlier than at the turn of the 19th / 20th centuries. The industrial revolution brought along...
-
Advancements in Diamond-Like Carbon Coatings
PublicationAn essential resource for engineers and scientists in the coatings field, providing an in-depth examination of current and advanced technologies for industrially oriented nanoceramic and nanocomposite coatings
-
Zaufanie do siebie jako jeden z aspektów zaufania w aktywności przedsiębiorczej
PublicationArtykuł prezentuje znaczenie zaufania do samego siebie na tle zaufania w relacjach budowanych przez przedsiębiorcę w jego otoczeniu społecznym i biznesowym. Wyjaśniono koncepcję zaufania do samego siebie, odnosząc się do zróżnicowanych typów zaufania, na przykład: kalkulacyjnego, opartego na wiedzy i identyfikacyjnego. Wskazano jego potencjalne źródła i konsekwencje w kontekście budowania własnego wizerunku, podejmowania decyzji...
-
Supporting Assurance by Evidence-based Argument Services
PublicationStructured arguments based on evidence are used in many domains, including systems engineering, quality assurance and standards conformance. Development, maintenance and assessment of such arguments is addressed by TRUST-IT methodology outlined in this paper. The effective usage of TRUST-IT requires an adequate tool support. We present a platform of software services, called NOR-STA, available in the Internet, supporting key activities...
-
Zaufanie w zespołach pracowniczych – czy polskie zespoły są gotowe na empowerment?
PublicationZaufanie jest istotnym elementem klimatu pracy zespołowej i warunkiem budowania efektywnych zespołów, korzystających z potencjału zaangażowanych w realizację celu pracowników. Zaufanie jest też podstawą wdrażania w zespołach zasad empowermentu, rozumianego nie tylko jako przekazanie władzy członkom zespołu, ale również jako zdolność zespołu do przejmowania odpowiedzialności za realizację wybranego celu. W artykule przedstawiono...
-
Recent developmentsinthesynthesisand biological activityofacridine/acridoneanalogues
PublicationMany people in the world struggle with cancer or bacterial, parasitic, viral, Alzheimer's and other diseases. Therefore, many scientists seek new, more effective, more selective and less toxic drugs. Acridine/acridone derivatives constitute a class of compounds with a broad spectrum of biological activity and are of great interest to scientists. Todate, many acridine/acridone analogues have been obtained,which, inter alia, exhibit...
-
DATA JOURNALS AND DATA PAPERS IN VARIOUS RESEARCH AREAS AND SCIENTIFIC DISCIPLINES – BIBLIOMETRIC ANALYSIS BASED ON INCITES
PublicationThe main aim of this work is to provide insight into a bibliometric analysis of Data Journals and Data Papers in terms of research areas, disciplines, publication year and country. In particular, we calculated many bibliometric indicators, especially: the number of publications and citations. Furthermore, this work also investigated the top 20 journals in which scientists published the largest number of Data Papers. It was found...
-
Professor Jan Kruszewski-Majewski (1929-2012)
PublicationIn this obituary, we present the life and achievements of an outstanding Polish scientist, Professor Jan Kruszewski-Majewski, who passed away in 2012. Professor Jan Kruszewski-Majewski was one of the pioneers in introducing modern numerical methods in mechanics. He created and developed an original, Polish method of modellings called the rigid finite element method. He was ont only an outstanding scientist, but also a person of...
-
Practical Evaluation of Internet Systems' Security Mechanisms
PublicationA proposed Internet systems security layer with context-oriented security mechanisms reduces the risk associated with possible vulnerabilities. A metric of the system trust level is proposed, and then evaluated according to a university Internet system.
-
Zaufanie w zespole badawczym – studium przypadku (projekt CD NIWA realizowany na Politechnice Gdańskiej)
PublicationArtykuł dotyczy tematyki klimatu pracy zespołowej, ze szczególnym uwzględnieniem zaufania w zespole jako czynnika warunkującego zaangażowanie, efektywność i innowacyjność zespołu. Przeanalizowano znaczenie oraz wymiary zaufania w zespole badawczym na podstawie koncepcji International Team Trust Indicator, czyli dziesięciowymiarowego modelu zaufania. Celem artykułu jest analiza klimatu współpracy i poziomu zaufania w interdyscyplinarnym...
-
Zaufanie do marek jako mediator pomiędzy postrzeganym ryzykiem i skłonnością do elektronicznego word-of-mouth
PublicationRozwój Internetu oraz dostęp konsumentów do mediów społecznościowych wpływają na ich zaangażowanie on-line. Odzwierciedla to również sposób, w jaki konsumenci wyrażają opinie o markach i produktach w Sieci. Celem ankiety było zbadanie wpływu postrzeganego ryzyka i zaufania do marki na skłonność konsumentów do electronic word-of-mouth (eWOM). Ponadto, autorzy zbadali rolę zaufania do marki jako mediatora w relacji między postrzeganym...
-
Analiza numeryczna i badania doświadczalne wpływu usytuowania stężeń na nośność wyboczeniową modelu kratownicy
PublicationIn the present research the results of experimental test and numerical analyses of a model of a typical truss are presented. The truss linear buckling analysis and non linear static analyses with respect to material and geometrical nonlinearity are conducted. For different stiffnesses and location of braces, the critical load and limit load for the truss are calculated and the threshold bracing stiffness is found. The results of...
-
Pomiędzy kontrolą i zaufaniem – jakich liderów potrzebują wirtualne zespoły projektowe
PublicationArtykuł dotyczy zarządzania zespołem wirtualnym, które jest szczególnym wyzwaniem ze względu na rozproszenie geograficzne członków zespołu oraz porozumiewanie się za pośrednictwem technologii informacyjnej. Skoncentrowano się na utrzymywaniu odpowiedniej proporcji pomiędzy zaufaniem i kontrolą zespołu i opracowano listę rekomendacji dla liderów zespołów wirtualnych, dotyczących budowania zaufania i koordynacji pracy. Do realizacji...
-
Therapeutic biomaterials - application in neurology and cardiology
PublicationBiomaterials are of interest in most medical fields. It's hard to imagine life without them. And due to the ever-increasing demand, scientists are developing new materials. Diseases of the nervous and cardiovascular systems are still a big problem, which are associated with a limited ability to regenerate brain or heart tissues. Therefore, this review discusses the advancement in biomaterial engineering for the treatment of neurological...
-
Therapeutic biomaterials – application in neurology and cardiology
PublicationBiomaterials are of interest in most medical fields. It's hard to imagine life without them. And due to the ever-increasing demand, scientists are developing new materials. Diseases of the nervous and cardiovascular systems are still a big problem, which are associated with a limited ability to regenerate brain or heart tissues. Therefore, this review discusses the advancement in biomaterial engineering for the treatment of neurological...
-
Do personality traits influence the user’s behavioral intention to adopt and use Open Government Data (OGD)? An empirical investigation
PublicationThe academic interest in the Open Government Data (OGD) domain has been burgeoning over the years. Conceding that the prime focus of an OGD initiative is its further re-use for value creation and innovation by stakeholders, the present study seeks to underscore the role of HEXACO personality traits on behavioral intention (BI) to adopt and use OGD in developing countries' context. We investigate the direct, indirect, and moderating...
-
Zarządzanie zaufaniem w bezprzewodowych sieciach czujników - studium przypadku
PublicationW artykule przedstawiono studium przypadku dotyczące zastosowania bezprzewodowej sieci czujników do wspomagania pacjenta z nadwagą w jego środowisku domowym. Przyjęto, że sieć wykorzystuje metodę rozproszonego zarządzania zaufaniem i pokazano, że metoda ta umożliwia wykrycie i izolację czujników realizujących działania sprzeczne z polityką sieci. Ilościowe oszacowanie czasu niezbędnego do wykrycia takich...
-
Wykorzystanie mediów społecznościowych do promocji otwartości w badaniach naukowych na przykładzie Biblioteki Politechniki Gdańskiej
PublicationMedia społecznościowe są jednym ze sposobów na skuteczną promocję zasobów oraz usług bibliotecznych w obecnym świecie cyfrowym. Stanowią również niedocenianą możliwość komunikacji pomiędzy naukowcami, bibliotekarzami a czytelnikami. Biblioteka akademicka może aktywnie angażować się w proces upowszechniania dorobku naukowego uczelni, podejmując w tym celu różnorakie działania marketingowe, wykorzystując takie serwisy jak: Facebook,...
-
Mitigating Time-Constrained Stolen-Credentials Content Poisoning in an NDN Setting
PublicationNDN is a content-centric networking architecture using globally addressable information objects, created by publishers and cached by network nodes to be later accessed by subscribers. Content poisoning attacks consist in the substi-tution by an intruder publisher of bogus objects for genuine ones created by an honest publisher. With valid credentials stolen from an honest publisher, such attacks seem unstoppa-ble unless object...
-
Specification-Oriented Automatic Design of Topologically Agnostic Antenna Structure
PublicationDesign of antennas for modern applications is a challenging task that combines cognition-driven development of topology intertwined with tuning of its parameters using rigorous numerical optimization. However, the process can be streamlined by neglecting the engineering insight in favor of automatic de-termination of structure geometry. In this work, a specification-oriented design of topologically agnostic antenna is considered....
-
Zaufanie w zespole projektowym a (kobiecy) model przywództwa
PublicationArtykuł prezentuje wyniki badań dotyczące znaczenia czynników kształtujących zaufanie w pracy zespołowej, do których należą: adekwatne nagradzanie, dzielenie się informacjami, ustalone cele i zasady pracy, przejrzystość środowiska i otwarta komunikacja. Wyniki koncentrują się na zachowaniach lidera/ przywódcy, które maja wpływ na kształtowanie zaufanie w zespole i pokazują różnice w zależności od płci.