Filters
total: 777
-
Catalog
Search results for: COBALT FERRITE
-
Vascular stents - materials and manufacturing technologies
PublicationThe objective of this article is to present materials and technology for the manufacture of vascular stents with appropriate design requirements. The use of the right material is very important in implantology. A biomaterial introduced into the circulatory system must be biocompatible and hemocompatible. At the same time, it should not initiate toxic, mutagenic, or immunological reactions. Currently, 316L stainless steel (316L...
-
Magnetoelectric, spectroscopic, optical and elastic properties of Co-doped BaTiO3 ceramics
Publicationhe BaTiO3 perovskite is widely used in the electronic technology due to its dielectric, piezoelectric and ferroelectric properties and is a well-known base for obtaining a promising multifunctional material. In this paper we report the extensive studies on the Co-doped BaTiO3 ceramics for the wide range cobalt content. Full structural characterization of studied samples in a 20–450 K range was provided. The results of research...
-
Evaluation of electrosynthesized reduced graphene oxide–Ni/Fe/Co-based (oxy)hydroxide catalysts towards the oxygen evolution reaction
PublicationIn this work, the specific role of the addition of graphene oxide (GO) to state-of-the-art nickel–iron (NiFe) and cobalt–nickel–iron (CoNiFe) mixed oxides/hydroxides towards the oxygen evolution reaction (OER) is investigated. Morphology, structure, and OER catalytic activity of the catalysts with and without GO were studied. The catalysts were fabricated via a two-step electrodeposition. The first step included the deposition...
-
Apparent molar volumes of divalent transition metal perchlorates and chlorides in N,N-dimethylacetamide.
PublicationZmierzono gęstości roztworów nadchloranów i chlorków manganu(II), kobaltu(II), niklu(II), miedzi(II) i cynku(II) w temperaturach 10, 20,25, 30, 40, 50 i 60(o)C. Obliczono pozorne objętości molowe. Wyznaczono graniczne wartości cząstkowych molowych objętości tych soli oraz odpowiednie rozszerzalności. Przeanalizowano i wyjaśniono różnice we właściwościach wolumetrycznych roztworów nadchloranów i chlorków.
-
Tensile test of 1.4571 / X6CrNiMoTi17-12-2 / AISI 316Ti grade austenitic steel
Open Research DataShip structures and their components are build mainly of steel. Hull steel is used to build the hull structure. Some structural elements, such as RSW (Refrigerated See Water) tanks, or LNG (Liquid Natural Gas) tanks - gas transported at temperatures below -162° C, are build from austenitic steels. Austenitic steels have a different microstructure and...
-
On the correlation between magnetoacoustic emission and magnetostriction dependence on the applied magnetic field
PublicationThe correlation between magnetoacoustic emission signal envelopes and magnetostriction curves is investigated. Two sets of samples are being considered: tempered martensitic steel and plastically deformed ferritic steel. It is shown that even though some general relations may be observed, as was demonstrated in the literature, the correlation is not always present. One may not expect to change both quantities in the same way if...
-
Badanie technologii informatycznych u dostawcy usług internetowych
PublicationW artykule przedstawiono raport z badania technologii informatycznych dotyczącego analizy narzędzia, które firma wykorzystuje do zarządzania zawartością portalu (CMS). Badana firma uznała wykorzystywane narzędzia za niewystarczające w obliczu rozwoju potrzeb. Wobec tego postanowiono zweryfikować konieczność wymiany systemu na nowy oraz oszacować możliwość i opłacalność jego modyfikacji. W tym celu przeanalizowano funkcjonalności...
-
Thermodynamic properties of inorganic salts in nonaqueous solvents. II. Apparent molar volumes and compressibilities of divalent transition-metal perchlorates in acetonitrile
PublicationW oparciu w wyniki pomiarów gęstości wykonanych w temperaturze 15,20,25,30,35,40 i 50 stopni Celsjusza oraz pomiaru szybkości dżwięku w temperaturze 25 stopni Celsjusza, wyznaczono pozorne objętości molowe oraz ściśliwości adiabatyczne roztworów nadchloranów manganu(II), kobaltu(II), niklu(II) i cynku(II). Obliczono odpowiednie wartości standardowe oraz rozszerzalności izobaryczne. Przeanalizowano związki między strukurą elektronową...
-
MMA fighters's technical-tacticak preparation-fight analysis: a case study
Publication.
-
Investigation into the Effect of Spinel Pigments on the Photostability and Combustion Properties of Ethylene-Norbornene Copolymer
PublicationMulticolor ethylene-norbornene (EN) composites filled with three different spinel pigments (Cobalt Green-PG50, Zinc Iron Yellow-PY 119, Praseodym Yellow-PY159) were prepared by melt mixing and characterized in terms of their stability under destructive environmental conditions. The EN films were subjected to accelerated aging by ultraviolet (UV) photooxidation for 300 h, 600 h, or 900 h. The mechanical performance of the EN composites...
-
Multidecadal (1960-2011) shoreline changes in Isbjornhamna (Hornsund, Svalbard)
PublicationAsection of a gravel−dominated coast in Isbjørnhamna (Hornsund, Svalbard) was analysed to calculate the rate of shoreline changes and explain processes controlling coastal zone development over last 50 years. Between 1960 and 2011, coastal landscape of Isbjørn− hamna experienced a significant shift from dominated by influence of tide−water glacier and protected by prolonged sea−ice conditions towards storm−affected and rapidly...
-
Recommendations of the Polish Psychiatric Association regarding the treatment of affective disorders in women of childbearing age. Part II: Bipolar disorder
Publication -
Sandra Natalia Cabała mgr inż.
People -
Spawanie podwodne stali dupleks odpornej na korozję
PublicationW artykule przedstawiono wyniki badań spawalności stali dupleks w warunkach podwodnych. Zainteresowanie spawaniem podwodnym tej grupy stali wiąże się z koniecznością opracowania spawalniczych metod naprawczych rurociągów eksploatowanych w przemyśle wydobywczym ropy naftowej. Do badań wykorzystano metodę spawania GMA za pomocą lokalnej komory suchej. Wykonano napoiny pod wodą na głębokości 0,5 m oraz na powietrzu przy zbliżonych...
-
Skłonność do tworzenia pęknięć zimnych złączy ze stali ferrytyczno-austenitycznej typu dupleks 2205 przy spawaniu pod wodą metodą mokrą
PublicationSpawanie pod wodą stali ferrytyczno-austenitycznych typu dupleks budzi coraz szersze zainteresowanie. Wynika to z pilnej potrzeby opracowania spawalniczych technologii naprawczych rurociągów do transportu ropy naftowej eksploatowanych pod wodą. Do badań wykorzystano metodę mokrą przy zastosowaniu spawania elektrodami otulonymi (proces 111). Wykonano technologiczne próby Tekken pod wodą na głębokości 0,5 m oraz na powietrzu. Przeprowadzono...
-
Biotrickling filtration of n-butanol vapors: process monitoring using electronic nose and artificial neural network
PublicationBiotrickling filtration is one of the techniques used to reduce odorants in the air. It is based on the aerobic degradation of pollutants by microorganisms located in the filter bed. The research presents the possibility of using the electronic nose prototype combined with artificial neural network for biofiltration process monitoring in terms of reduction in n-butanol concentration and odour intensity of treated air. The study...
-
Frontier education for a sustainable future - speculative design in architecture as a transdisciplinary experiment
PublicationIn this article, the authors propose the term frontier education referring to the well-established notion of frontier research - one, that through opening unexpected transdisciplinary perspectives, may offer new insights and create a fertile ground for new discoveries and ground-breaking concepts. In answer to the question of how to get rid of normative thinking and extend architectural experimentations, a speculative design architectural...
-
Influence of compaction effectiveness on interlayer bonding of asphalt layers
PublicationThe paper presents the results of research on the interlayer bonding of asphalt layers compacted in the laboratory and in the field. To measure the interlayer bonding at a temperature of 20°C the Leutner test apparatus was used and load was applied at a rate of 50 mm/minute. Three types of interlayer interfaces were tested: no tack coat and tack coats made of two types of the pure bitumen emulsions. Four compaction techniques were...
-
Technical and economic conditions of supplying residential consumers with heat from nuclear power plant
PublicationThe reduction of CO2 emission requires technological shift towards carbon-free options. Cogeneration of electricity and heat based on coal and natural gas will experience generation cost increase, if the costs of emissions are imposed on the plant operators. Therefore, nuclear and renewable options should be considered. In this paper, we present the concept of electricity and heat supply system with nuclear condensing turbine adapted...
-
Perspektywy zastosowania hybrydowych układów napędowych w pojazdach wojskowych.
PublicationPrzedstawiono budowę, działanie oraz zalety i wady różnych rodzajów hybrydowych układów napędowych pojazdów. Opisano programy rozwojowe wojskowych pojazdów hybrydowych prowadzone obecnie w Stanach Zjednoczonych: RST- V Shadow, COMBATT, ''hybrydyzację'' układów napędowych samochodu Humvee, transportera M113 i bojowego wozu piechoty M2 Bradley oraz programy perspektywiczne -FCS,CHPS, UGV. Krótko zaprezentowano prace dotyczące...
-
Creating new voices using normalizing flows
PublicationCreating realistic and natural-sounding synthetic speech remains a big challenge for voice identities unseen during training. As there is growing interest in synthesizing voices of new speakers, here we investigate the ability of normalizing flows in text-to-speech (TTS) and voice conversion (VC) modes to extrapolate from speakers observed during training to create unseen speaker identities. Firstly, we create an approach for TTS...
-
Influence of Bingham fluid viscosity on energy performances of a vortex chamber pump
PublicationOne of the problems in the development of coal-water technologies is the use of reliable and long-lasting pumps. To date, classic pumps, due to the use of mechanical moving parts and seals, are subject to rapid abrasive wear. The solution to this problem can lie in the creation of new vortex chamber pumps developed by the authors. They are highly reliable, simple in design and have no moving parts. The object of this paper consists...
-
Rhodotorulic Acid and its Derivatives: Synthesis, Properties, and Applications
PublicationSiderophores are low molecular weight compounds produced by microorganisms to scavenge iron in iron-deficient environments. Rhodotorulic acid (RA), a natural hydroxamate siderophore, plays a vital role in iron acquisition for fungi and bacteria. As the simplest natural hydroxamate siderophore, RA exhibits a high affinity for ferric ions, enabling it to form stable complexes that facilitate iron uptake and transport within microorganisms....
-
Effects of preheating on laser beam–welded NSSC 2120 lean duplex steel
PublicationDuplex stainless steels show sustainable alternative for the conventional austenitic grades, with higher strength, higher resistance against stress corrosion cracking, and lower purchase cost. Thus, duplex stainless steel gains more attention in construction, oil and gas, and chemical industries. Among duplex stainless steels, low nickel and low molybdenum alloyed lean duplex stainless steel are a cost-efective substitution of...
-
Improved degradation of etodolac in the presence of core-shell ZnFe2O4/SiO2/TiO2 magnetic photocatalyst
PublicationIn the present study, susceptibility to photocatalytic degradation of etodolac, 1,8-diethyl-1,3,4,9 – tetrahydro pyran - [3,4-b] indole-1-acetic acid, which is a non-steroidal anti-inflammatory drug frequently detected in an aqueous environment, was for the first time investigated. The obtained p-type TiO2-based photocatalyst coupled with zinc ferrite nanoparticles in a core-shell structure improves the separation and recovery...
-
Effect of microstructure on mechanical properties and corrosion resistance of 2205 duplex stainless steel
PublicationThis paper presents results of the research on impact of microstructure of austenitic-ferritic steel of duplex type on its mechanical properties and susceptibility to stress corrosion cracking. As showed, improper processing technologies more and more often used in shipbuilding industry for plates and other half-finished products made of duplex steel may cause significant lowering their properties, which frequently makes their...
-
Effects of n-butanol presence, inlet loading, empty bed residence time and starvation periods on the performance of a biotrickling filter removing cyclohexane vapors from air
PublicationThis paper presents the results of investigations on the removal of cyclohexane vapors from air using a peat-perlite packed biotrickling filter. Effects of basic process parameters i.e. IL (inlet loading) and EBRT (empty bed residence time) as well as introduction of n-butanol to the treated air stream and starvation periods on the process performance were evaluated. The results show that the introduction of hydrophilic n-butanol...
-
Glass-ceramic joining of Fe22Cr porous alloy to Crofer22APU: interfacial issues and mechanical properties
PublicationThis work deals with the joining of porous Fe22Cr ferritic stainless steel to a dense Crofer22APU plate by using a silica-based, Ba-containing glass-ceramic. The chemical and interfacial stability and the mechanical properties of the joints were evaluated before and after thermal ageing at 700 ◦C for 500hrs. The sintering behaviour of the glass was assessed by using heating stage microscopy (HSM) to study the influence of a porous...
-
Damage detection in turbine wind blades by vibration based methods
PublicationThe paper describes results of numerical simulation for damage localization in the composite coat of a wind turbine blade usingmodal parameters and a modern damage detection method (wavelet transform).
-
Justyna Kucińska-Lipka dr hab. inż.
People -
Ranking of Heterogeneous Catalysts Metals by Their Greenness
PublicationCatalysis is very important process in industry and laboratory practice, especially from the point of green chemistry principles. However, eco-friendly character of heterogeneous catalysts, containing transition metal components has not been evaluated, yet. Therefore, we perform a comprehensive assessment of 18 heterogeneous metal catalysts (Pd, Pt, V, Co, Ni, Mo, Ru, Mn, Au, Cu, Cd, Zr, Fe, Rh, Ir, Sn, Zn, Ag) using multicriteria...
-
Bulk-Surface Modification of Nanoparticles for Developing Highly-Crosslinked Polymer Nanocomposites
PublicationSurface modification of nanoparticles with functional molecules has become a routine method to compensate for diffusion-controlled crosslinking of thermoset polymer composites at late stages of crosslinking, while bulk modification has not carefully been discussed. In this work, a highly-crosslinked model polymer nanocomposite based on epoxy and surface-bulk functionalized magnetic nanoparticles (MNPs) was developed. MNPs were...
-
Enzyme and Biological Activities of the Water Extracts from the Plants Aesculus hippocastanum, Olea europaea and Hypericum perforatum That Are Used as Folk Remedies in Turkey
Publication -
A review of applications of ellipsometry in corrosion research
PublicationElipsometria jest to nieinwazyjna i bardzo dokładna technika pomiarowa znajdująca coraz więcej zastosowań w badaniach korozyjnych. Poglądowo przedstawiono aktualne zastosowania pomiarów elipsometrycznych. Przeglądu dokonano pod kątem przydatności elipsometrii do wyznaczania grubości oraz charakterystyki optycznej cienkich warstewek pasywnych pokrywających powierzchnię różnych metali. Opisano zastosowanie pomiarów elipsometrycznych...
-
Zastosowania pomiarów elipsometrycznych w badaniach korozyjnych
PublicationElipsometria jest to nieinwazyjna i bardzo dokładna technika pomiarowa znajdująca coraz więcej zastosowań w badaniach korozyjnych. Poglądowo przedstawiono aktualne zastosowania pomiarów elipsometrycznych. Przeglądu dokonano pod kątem przydatności elipsometrii do wyznaczania grubości oraz charakterystyki optycznej cienkich warstewek pasywnych pokrywających powierzchnię różnych metali. Opisano zastosowanie pomiarów elipsometrycznych...
-
Właściwości elektryczne i magnetyczne szkła Fe2O3 – SiO2 – PbO
PublicationSzkło Fe2O3–SiO2–PbO wydaje się być obiecującym materiałem do zastosowań w urządzeniach elektrycznych takich jak rdzenie cewek, czujniki pola magnetycznego oraz mikrotransformatory. Jest to spowodowane korzystnymi właściwościami takimi jak stosunkowo wysoka rezystywność oraz w miarę duża przenikalność magnetyczna. Pierwsza wymieniona cecha skutkuje brakiem strat energii na prądy wirowe. Natomiast druga cecha oznacza potencjalną...
-
Recommendations of the Polish Psychiatric Association for treatment of affective disorders in women of childbearing age. Part III: Approach to pregnancy loss and unsuccessful in vitro treatment of infertility
Publication -
Application of advanced CFD simulations in seakeeping analysis of ships (case study)
PublicationThe novel design process of many types of ships needs estimation of seakeeping properties. Especially ships like Offshore Supply Vessels, Wind Farm Support Vessels, Research Vessels, ferries, military vessels, rescue vessels require extended analysis of ship behavior on rough sea. The main reason for improving ships operability in different sea conditions is need of rising efficiency of propulsion system, reducing hull added resistance,...
-
Enhancement of the Magnetoresistance in the Mobility‐Engineered Compensated Metal Pt 5 P 2
PublicationThe magnetoresistance (MR) in nonmagnetic materials continues to be a fertile research area in materials science. The search for giant, positive MR has been limited to a rather small window of materials such as high-mobility semimetals in single-crystalline form. Here, the observation of a very large positive MR in metallic Pt5P2 in polycrystalline form is reported. The observations reveal that improvement of the crystallinity...
-
Badania spektroskopowe wybranych silanotiolanów metali o budowie polimerycznej
PublicationPodjęto próby otrzymania tri-tert-butoksysilanotiolanowych kompleksów niklu(II), kobaltu(II), cynku(II) i kadmu(II) o budowie polimerycznej mogących pełnić rolę prekursorów w syntezie materiałów funkcjonalnych. W tym celu przeprowadzono syntezy odpowiednich silanotiolanowych metali z grupą diamin alifatycznych. Otrzymano szereg nowych obojętnych polimerów koordynacyjnych o budowie przestrzennej typu 1D. Dla siedmiu z nich zostały...
-
Water sorption and blistering of GFRP laminates with varying structures
PublicationThe microstructures, water absorption as well as blistering was studied for bi- and tri- axial glass fibre vinyl ester and polyester -matrix laminates coated with gel coat layer and uncoated. The effect of manufacturing technique on water sorption characteristics was considered. It was found that water sorption characteristics of GFRP depend on manufacturing methods. The least water intake was found for specimens having perfect...
-
Morphology and internal structure of small-scale washovers formed in the coastal zone of the semi-enclosed tideless basin, Gulf of Gdańsk, Baltic Sea
PublicationThis study explores the morphological features and internal structure of small-scale washovers along the southeastern Baltic Sea coast, providing insights into these most widespread yet often neglected deposits in the recent research of geomorphological and sedimentary record of storm surges. A 15-year-long record of morphological changes of the coast was acquired from regional orthophotos to analyse their geometry and spatial...
-
Underwater in situ local heat treatment by additional stitches for improving the weldability of steel
PublicationIn this paper the influence of in situ local heat treatment performed by additional stitches on the weldability of high-strength low-alloy (HSLA) S355J2C+N steel was tested. The investigated steel is characterized by high susceptibility to cold cracking. It is necessary to find a method to improve the quality of welded joints. The local heat treatment was applied as an eect of bead-on plate welding made on the face of a Tekken...
-
Dielectric Spectroscopy Studies and Modelling of Piezoelectric Properties of Multiferroic Ceramics
PublicationCompounds and solid solutions of bismuth ferrite (BiFeO3)—barium titanate (BaTiO3) system are of great scientific and engineering interest as multiferroic and potential high-temperature lead-free piezoelectric materials. In the present paper, the results of research on the synthesis and characterisation of 0.67Bi1.02FeO3–0.33BaTiO3 (67BFBT) ceramics in terms of crystal structure and dielectric and piezoelectric properties are reported....
-
Electric Vehicles and Vehicle–Grid Interaction in the Turkish Electricity System
Publication -
Influence of laser melting on surface layer properties of titanium alloy Ti6Al4V
PublicationIn time of rapid technology and medicine progress, implants are becoming more widely used in the human body, ranging from dental implants, stabilizing plates, screws, orthopaedic prostheses. For example, there are many types of hip prostheses used for hip replacement as well as various types of materials used for these orthopaedic prostheses. Properties of titanium alloys used in hip prostheses combined with good strength properties,...
-
Modelling and analysis of medium frequency transformers for power converters
PublicationThe evolutions in power systems and electric vehicles, related to the economic opportunities and the environmental issues, bring the need of high power galvanically isolated DC-DC converter. The medium frequency transformer (MFT) is one of its key components, enabled by the increasing switching frequency of modern power semiconductors like silicon carbide transistors or diodes. The increased operating frequency offers small...
-
The effect of depth of surface layers constituted by vacuum technologies on pitting
PublicationThe paper presents the results of a study of the effect of vacuum technologies of formation of surface layers on pitting of associated elements in a lubricated, heavy-load rolling contact. The study has shown that increase in a PVD coat depth is accompanied by decrease in the fatigue friction pair.
-
Rhodotorulic Acid and its Derivatives: Synthesis, Properties, and Applications
PublicationSiderophores are low molecular weight compounds produced by microorganisms to scavenge iron in iron-deficient environments. Rhodotorulic acid, a natural hydroxamate siderophore, plays a vital role in iron acquisition for fungi and bacteria. As the simplest natural hydroxamate siderophore, it exhibits a high affinity for ferric ions, enabling it to form stable complexes that facilitate iron uptake and transport within microorganisms....
-
Investigations of the isolators containing microstrip FCL section
PublicationW pracy opisany został projekt układu izolatora zawierającego podłużnie magnesowane ferrytowe sprzężone linie mikropaskowe (FCL). W warstwowej strukturze układu ferryt został wprowadzony jako nakładka. Obciążenie w układzie izolatora zostało zrealizowane na dwa sposoby: jako obciążenie współosiowe oraz jako mikopaskowy układ planarny zawierający skupiony rezystor. Uzyskane z symulacji wyniki zostały zweryfikowane eksperymentalnie....