Wyszukiwarka
Filtry
wszystkich: 842
wybranych: 686
Wyniki wyszukiwania dla: CAST-IN-PLACE%20CONCRETE
-
Study of Phase and Chemical Composition of Bi1-xNdxFeO3 Powders Derived by Pressureless Sintering
PublikacjaIn the present paper studies on Bi1xNdxFeO3 for x =0.1-0.4 are reported. The mixed oxide method followed with pressureless sintering was employed for ceramics fabrication. Thermal behavior of stoichiometric mixtures of simple oxide powders, viz. Bi2O3, Nd2O3 and Fe2O3 was studied by simultaneous thermal analysis. It was found that with an increase in neodymium content the weight loss increased from 0.75% to 3.16% for x =0.1 and...
-
Electrical properties of organic and perovskite systems used in solar cells
PublikacjaNowadays, a great progress in the areas of molecular and hybrid photovoltaics is observed. The devices based on organic and perovskite materials are getting attention mostly due to their low cost production process. However, their efficiency and stability are still lower than for inorganic materials which make them less popular. Therefore, a detailed understanding of the device physics is fundamental for organic and perovskite...
-
Discovering interactions between applications with log analysis
PublikacjaApplication logs record the behavior of a system during its runtime and their analysis can provide useful information. In this article, we propose a method of automated log analysis to discover interactions taking place between applications in an enterprise. We believe that such an automated approach can greatly support enterprise architects in building an up-to-date view of a governed system in a modern, fast-paced development...
-
Methodology of Constructing and Analyzing the Hierarchical Contextually-Oriented Corpora
PublikacjaMethodology of Constructing and Analyzing the Hierarchical structure of the Contextually-Oriented Corpora was developed. The methodology contains the following steps: Contextual Component of the Corpora’s Structure Building; Text Analysis of the Contextually-Oriented Hierarchical Corpus. Main contribution of this study is the following: hierarchical structure of the Corpus provides advanced possibilities for identification of the...
-
Understainding solid-phase microextraction: key factors influencing the extraction process and trends in improving the technique
PublikacjaAnalytical chemists are faced with the daunting challenges of accurately monitoring the state of the environment and the processes taking place in it and of determining an enormous range of analytes often present in trace and ultratrace amounts in sample matrixes with complex or variable compositions. Further challenges are presented by the need to introduce new methodologies into current analytical practice and equipment to comply...
-
DESIGNING OF PARKING SPACES TAKING INTO ACCOUNT THE PARAMETERS OF DESIGN VEHICLES IN RUSSIA
PublikacjaNowadays, in all the cities, there is an acute problem of a lack of parking spaces. The number of vehicles are becoming more and more larger, not only in megacities, but in small cities of the country, as well and there are no more parking places - the pace of solving the problem is several times slower than the rate of the transport growth among the citizens. The article is dedicated to the determination of the optimum sizes parking...
-
Is sequential batch reactor an efficient technology to protect recipient against non-steroidal anti-inflammatory drugs and paracetamol in treated wastewater?
PublikacjaThe tested facility was a wastewater treatment plant (WWTP) in Swarzewo, where the wastewater treatment takes place in aeration chambers with activated sludge using sequential batch reactors (SBRs). The concentration of the following pharmaceuticals: ibuprofen, paracetamol, flurbiprofen, naproxen, diclofenac, and its metabolites 5OH-diclofenac and 4OH-diclofenac was tested in influents and effluents. Simultaneously, the conventional...
-
LDFEM analysis of FDP auger installation in cohesive soil
PublikacjaThis paper deals with large deformation finite element (LDFE) preliminary modelling of Full Displacement Pile (FDP) installation in cohesive soil deposit located in Jazowa, Poland. The detailed FDP auger geometry is applied and the drilling process is modelled with full 3D Coupled Eulerian-Lagrangian (CEL) formulation. The total stress approach and elastic-perfectly plastic model with rate-dependent Mises plasticity is used. The...
-
Orthotropic membrane as a mechanical model of surgical implant in abdominal hernia repair
PublikacjaEven though the incisional hernia repair surgery is a well known procedure, mechanical properties of the tissue-implant system are unknown so the implantation of the repairing mesh is quite intuitive and, recurrences of the illness still take place. The main objective of the study is to define an operated hernia model that can be used for surgery planning and the assessment of the repair persistence. The load applied to the structure...
-
Fuzzy Sets in the GIS Environment in the Location of Objects on the Surface of Water Bodies
PublikacjaThe issue presented here focuses on concerns about the localization of the object on water surface. The article shows how to facilitate localization process by applying mathematical solutions characterized by simplicity, rapid action and delivering credible results. The paper shows the results of background experiments, which enabled to collect technical parameters needed for conducting simulation testing. The research has been...
-
The landscape in the informal education of the youngest
PublikacjaThe European Landscape Convention, adopted in 2000, aims to promote the protection, management and planning of landscapes and to organise cooperation on landscape-related issues. Countries that ratified the Convention undertook to introduce activities that would promote public education on the subject. In Poland, the Ministry of Education has identified schools as the place to implement...
-
Design of residential buildings in architecture education
PublikacjaThis article is based on an analysis of residential building designs made by students of the Faculty of Architecture at Gdańsk University of Technology (FA-GUT), Poland, and on the results of a survey conducted among these students. The purpose of the survey was to verify the broad, interdisciplinary knowledge of the students required in preparation for taking up design issues, as well as their ability to use this knowledge in...
-
Dynamics of Chains as a Tool to Study Thermomechanical Properties of Proteins.
PublikacjaPolymer dynamics can be formulated on different levels of detail. One approach eliminates microscopic degrees of freedom and a polymer molecule is represented by a simplified structure—a chain. In the simplest case monomers of ideal chain have fixed length, and their orientation is independent of the orientations and positions of neighbouring monomers. This is reason that two monomers can co-exist at the same place. Ideal chain...
-
The Rule-Based Model of Negentropy for Increasing the Energy Efficiency of the City’s Digital Transformation Processes into a Smart City
PublikacjaThe aim of the article is to build a rule-based model (RMFDN) for increasing the energy efficiency of Smart Cities’ digital transformation processes. The problem that arises during the implementation of digital transformation processes concerns the measures that should be assigned to estimate the duration of the digital transformation. Previous studies of digital transformation have been based on the analysis of design processes...
-
NOWE ŻYCIE DWORCÓW KOLEJOWYCH - MOŻLIWOŚCI MODERNIZACJI OBIEKTÓW OBSŁUGI PASAŻERÓW
PublikacjaW aspekcie współcześnie zachodzących zmian demograficznych, rozwijających się technologii oraz poszukiwania rozwiązań proekologicznych wzrasta potencjał transportu kolejowego. Po okresie upadku znaczenia kolei jesteśmy świadkami jej postępującej transformacji w Europie. Do obsługi ruchu pasażerskiego służy w Polsce prawie 600 dworców kolejowych, z których większość nie jest jeszcze przystosowana do aktualnych potrzeb użytkownika...
-
Technical diagnostics and monitoring of traction current collectors
PublikacjaNew evaluation methods of the technical condition of rolling stock current collectors are proposed in this paper. The method of automatic measurement of the pantograph static force characteristic, realized when the vehicle runs through the test section of the track with especially prepared overhead line height distribution, has been practically implemented by the Polish Railways. The method of testing the slipper spring suspension...
-
Areas of Updraft Air Motion in an Idealised Weather Research and Forecasting Model Simulation of Atmospheric Boundary Layer Response to Different Floe Size Distributions
PublikacjaPresented dataset is part of a numerical modelling study focusing on the analysis of the influence of sea ice floe size distribution (FSD) on the horizontal and vertical structure of convection in the atmosphere. The total area and spatial arrangement of the up-drafts indicates that the FSD affects the total moisture content and the values of area averaged turbulent fluxes in the model domain. In fact, while convective updrafts...
-
An Island of Connectedness: Intra-Insular and Inter-Regional Communications of Rab Island (North-East Adriatic, Kvarner Gulf), Croatia
PublikacjaDrawing from archaeological data on Prehistoric and Roman settlement patterns, and respective sepulchral features, just as on later historic and cartographic sources, in this contribution it will be shown how movement along with mobility influenced on and were an integral part of settlement dynamics on the island of Rab (NE Adriatic, Croatia). The employed approach sees the practice of movement as dependent on specific social...
-
Degradation of stiffness of building columns exposed to bending and impact load during ground motions
PublikacjaThe safety of civil engineering structures under external loads, including ground motions, is one of the issues related to the idea of sustainable society. The earthquake-induced soft-storey failure is a typical type of damage observed in buildings due to seismic excitation. The failure of an intermediate soft storey of a structure results in large vertical impact loading acting on the lower floors due to the fall of the upper...
-
Validation of atmospheric aerosols parallel sampling in a multifold device
PublikacjaIn this work, particulate matter was collected using an active sampling system consisting of a PM10 (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling...
-
Photophysics of a Ruthenium 4H-Imidazole Panchromatic Dye in Interaction with Titanium Dioxide
PublikacjaThe photophysics of bis(4,4′-di-tert-butyl-2,2′-bipyridine-κ2N,N′)[2-(4-carboxyphenyl)-4,5-bis(p-tolylimino-κN)imidazolato]ruthenium(II) hexafluorophosphate is investigated, both in solution and attached to a nanocrystalline TiO2 film. The studied substitution pattern of the 4H-imidazole ligand is observed to block a photoinduced structural reorganization pathway within the 4H-imidazole ligand that has been previously investigated....
-
SENSITIVITY OF PUBLIC PLACES IN GDAŃSK OSOWA DISTRICT
PublikacjaThis paper summarises the results of the research carried out at the University of Ljubljana, Faculty of Architecture, Slovenia, during the PhD visiting period of the first author from the Gdansk University of Technology, Poland, in the framework of the PhD course "Sensitive urban places", leaded by the second author. Focusing to the specific problems of the Gdansk Osowa district in Poland, this research develops the idea of sensitivity...
-
Frequency Guided Generalized Adaptive Notch Filtering - Tracking Analysis and Optimization
PublikacjaGeneralized adaptive notch filters (GANFs) are estimators of coefficients of quasi-periodically time-varying systems, encountered e.g., in RF applications when Doppler effect takes place. Current state of the art GANFs can deliver highly accurate estimates of system variations’ frequency, but underperform in terms of accuracy of system coefficient estimates. The paper proposes a novel multistage GANF with improved coefficient...
-
Balancing energy processes in turbine engines
PublikacjaThe article discusses the issue of balancing energy processes in turbine engines in operation in aeronautic and PDULQHSURSXOVLRQV\VWHPVZLWKWKHDLPWRDQDO\VHDQGHYDOXDWH EDVLFRSHUDWLQJSDUDPHWHUV7KH¿UVWSDUWSUHVHQWV the problem of enormous amounts of energy needed for driving fans and compressors of the largest contemporary turbofan engines commonly used in long-distance aviation. The amounts of the transmitted power and the effect RIÀRZSDUDPHWHUVDQGFRQVWUXFWLRQDOSURSHUWLHVRIWKHHQJLQHV RQWKHLUSHUIRUPDQFHDQGUHDOHI¿FLHQF\DUH evaluated....
-
Modeling of Ice Passage Through Reservoirs System on the Vistula River
PublikacjaNumerical model was used to assess ice passage through proposed reservoir on the lower Vistula River. Model results were compared with observation on the Vistula River, but because the dam is not constructed yet, the direct comparison was not possible. The study focused on ice movement and accumulation in the reservoir for variety of low flow condition with and without wind effect. Bridge’s piers in the upper part of the reservoir...
-
Network society: a concept of smart information management
PublikacjaAutomatic enhancement of Internet broadcasted news has been recently gaining increasing importance and interest. Existing applications and models of textual Event Detection in online media are based on the analysis of news distributed via RSS (Rich Site Summary called also Really Simple Syndication) channels or available at news websites. It assumes that each piece of news is equally available to the reader and, therefore, describes...
-
Electronic noses: Powerful tools in meat quality assessment
PublikacjaMain factors that are considered by consumers when choosing meat products are colour and aroma, of which the latter is a more reliable indicator of quality. However, a simple sensory evaluation of hedonistic qualities is often not sufficient to determine whether protein is past its shelf life, and consumption of spoiled meat can lead to serious health hazards. Some volatile compounds can be used as spoilage indicators, and so a...
-
Building the Learning Environment for Sustainable Development: a Co-creation approach
PublikacjaEducation for sustainable development supports the improvement of knowledge, skills, attitudes and behaviors related to global challenges such as climate change, global warming and environmental degradation, among others. It is increasingly taking place through projects based on information and communication technologies. The effectiveness of the actions taken depends not only on the quality of the project activities or the...
-
Exploring perceptions of pro environmental educational mobile applications based on semantic field analysis
PublikacjaThe paper aims to identify multidimensional perceptions of mobile apps by their users. Special attention has been paid to pro-environmental educational apps. Semantic field analysis and measurement of emotional temperatures were performed to achieve this goal. Transcripts from seven focus group interviews were used as research material. The results indicate that functionality based on a reward or benefit system reinforces environmentally...
-
Preparation of Allyl Alcohol Oligomers Using Dipicolinate Oxovanadium(IV) Coordination Compound
PublikacjaCurrently, new precatalysts for olefin oligomerization are being sought in the group of vanadium(IV) complexes. Thus, the aim of our research was to examine the catalytic activity of the oxovanadium(IV) dipicolinate complex [VO(dipic)(H2O)2] 2 H2O (dipic = pyridine-2,6-dicarboxylate anion) in 2-propen-1-ol oligomerization as well as to characterize oligomerization products using matrix-assisted laser desorption/ionization–time-of-flight...
-
Biomedical engineering of polysaccharide-based tissue adhesives: Recent advances and future direction
PublikacjaTissue adhesives have been widely used for preventing wound leaks, sever bleeding, as well as for enhancing drug delivery and biosensing. However, only a few among suggested platforms cover the circumstances required for high-adhesion strength and biocompatibility, without toxicity. Antibacterial properties, controllable degradation, encapsulation capacity, detectability by image-guided procedures and affordable price are also...
-
Risk assessment methodologies for pedestrian crossings without traffic lights – Warsaw case study – pedestrian safety assessment
PublikacjaBased on data from 2015 [1], it was found that 31% of all fatalities in road accidents in Poland were pedestrians. In places accessible to pedestrian traffic 74.2% of total accidents involving pedestrians were recorded. Approximately 53.9% of accidents involving pedestrians take place in the proximity of pedestrian crossings. In the context of improving the safety of vulnerable road users, an assessment of the condition of infrastructure...
-
Mobile virtual presence in civil engineering education and training
PublikacjaEducation technologies are on the cusp, emerging technologies connected with each other might reveal new added value in this field. In this paper, the author showed a framework for conducting civil engineering classes with a virtual presence on the construction site. The presented idea might be realized by use of the unnamed aerial vehicle equipped with 360 video camera. On-site activities are transmitted at a distance by GSM and...
-
Security of export transactions in the offer of leading banks on the Polish market
PublikacjaThe following article presents the so-called conditioned payment methods, i.e. instruments for securing export transactions, such as letter of credit, documentary collection, bank guarantees, factoring and forfaiting. The characteristics of each particular method are presented as well as the transactions using them are described. In the following paper, the author included also the leading Polish banks, which offer the above- mentioned...
-
Scaling Up the Process of Titanium Dioxide Nanotube Synthesis and Its Effect on Photoelectrochemical Properties
PublikacjaIn this work, for the first time, the influence of scaling up the process of titanium dioxide nanotube (TiO2NT) synthesis on the photoelectrochemical properties of TiO2 nanotubes is presented. Titanium dioxide nanotubes were obtained on substrates of various sizes: 2 × 2, 4 × 4, 5 × 5, 6 × 6, and 8 × 8 cm2. The electrode material was characterized using scanning electron microscopy as well as Raman and UV–vis spectroscopy in order...
-
Modal analysis of railway current collectors using Autodesk Inventor
PublikacjaThe paper presents the results of modal analysis of railway current collector type 160EC. In the first place, the analysis was carried out analytically for a simplified two lumped mass pantograph model. Then numerical analysis was conducted in the Autodesk Inventor (AI) on the prepared multibody model using the AI modal analysis algorithm, which is based on the finite element method (FEM). Model elements which are most relevant...
-
Landscape as the tool of coherence in the land management of rural communes
PublikacjaEconomic and social transformation of rural areas in Poland after 1990 reveals itself through disintegration of previous spatial order. Building a new pattern requires a vision, which would counteract complex causes of disintegration. The latter belong to institutional domain of planning strategies and the area of common practices. Therefore, agreement on aims and means between spatial policy strategies and tactics of space users...
-
Jumping Wave Characteristic during Low Plasticity Burnishing Process
PublikacjaDuring the low plasticity burnishing process of soft materials such as carbon steel with a hardness of up to 40 HRC (Rockwell grade) a raised structure of the material known as the Jumping Wave forms in front of the tool roll. This phenomenon significantly disturbs the burnishing process, but is very poorly described in the literature. This article presents studies of this phenomenon on the example of burnished 1.0562 steel. The...
-
Technology Concept of TLP Platform Towing and Installation in Waters with Depth of 60 m
PublikacjaThe article is part of the design and research work conducted at the Gdansk University of Technology, Faculty of Ocean Engineering and Ship Technology, in cooperation with a number of other research centres, which concerns offshore wind farms planned to be built in the Polish zone of the Baltic sea in the next years. One of most difficult tasks in this project is building suitable foundations for each power unit consisting of a...
-
INFLUENCE OF BISMUTH CONTENT ON COMPLEX IMMITTANCE CHARACTERISTICS OF PRESSURELESS SINTERED BiNbO4 CERAMICS
PublikacjaGoal of the present research was to study immittance properties of BiNbO4 ceramics fabricated by the solid state reaction route followed by pressureless sintering. Four sets of samples were examined, namely the one fabricated from the stoichiometric mixture of oxides, viz. Bi2O3 and Nb2O5 as well as the ones with an excess of 3%, 5% and 10% by mole of Bi2O3. The immittance properties were studied by impedance spectroscopy. Measurements...
-
On the production of electricity in Poland using a geothermal binary power plant - A thermodynamic overview - Part I
PublikacjaPoland has a significant potential of geothermal energy. However, the high-temperature sources that are needed to drive power plants are found in relatively few places. Therefore, the objective of this paper is to consider any location in the northern part of Poland as a possible place to build a binary power plant. A scientific research was confirmed the existence of an elevated temperature gradient in this region. The hot rocks...
-
9-Cyano-10-methylacridinium hydrogen dinitrate
PublikacjaThe title compound, C15H11N2+·HN2O6−, crystallizes in the monoclinic space group C2/c with four molecules in the unit cell. The planar 9-cyano-10-methylacridinium cations lie on crystallographic twofold axes and are arranged in layers, almost perpendicular to the ac plane, in such a way that neighbouring molecules are positioned in a `head-to-tail' manner. These cations and the hydrogen dinitrate anions are linked through C—H⋯O...
-
Adaptive stochastic and hybrid nonlinear optimization algorithms for improving the effectiveness of the biological processes at WWTP
PublikacjaWastewater treatment plays an important factor in the modern world. Insufficient treatment may result in environmental pollution which can further lead to disasters and diseases. However, processes that take place inside wastewater treatment plants (WWTP) are highly complex in nature, therefore it is difficult to design an efficient, optimal control system. The problem regarding biochemical reactions inside Sequential Batch Reactor...
-
Fuel price, income and road safety as determinants of the level of the population’s economic well-being in Poland
PublikacjaThe opportunity to travel is one of the most favorite human activities, given that on a trip a person gets new knowledge, impressions and positive emotions. Recreational trips occupy a prominent place in the concept of the economics of happiness, and the study of factors that influence decision-making regarding travel is important for forecasting the number of tourists, infrastructure development, income and expenses of businesses...
-
Dynamic Execution of Engineering Processes in Cyber-Physical Systems of Systems Toolchains
PublikacjaEngineering tools support the process of creating, operating, maintaining, and evolving systems throughout their lifecycle. Toolchains are sequences of tools that build on each others' output during this procedure. The complete chain of tools itself may not even be recognized by the humans who utilize them, people may just recognize the right tool being used at the right place in time. Modern engineering processes, however, do...
-
Federated Learning in Healthcare Industry: Mammography Case Study
PublikacjaThe paper focuses on the role of federated learning in a healthcare environment. The experimental setup involved different healthcare providers, each with their datasets. A comparison was made between training a deep learning model using traditional methods, where all the data is stored in one place, and using federated learning, where the data is distributed among the workers. The experiment aimed to identify possible challenges...
-
Exploring Relationships Between Data in Enterprise Information Systems by Analysis of Log Contents
PublikacjaEnterprise systems are inherently complex and maintaining their full, up-to-date overview poses a serious challenge to the enterprise architects’ teams. This problem encourages the search for automated means of discovering knowledge about such systems. An important aspect of this knowledge is understanding the data that are processed by applications and their relationships. In our previous work, we used application logs of an enterprise...
-
Sustainable Waste Management for Implementation of a Circular Economy Model in a Port
PublikacjaThe manuscript presents the management of waste from marine vessels and cargo handling companies in a selected European Union port. The main objective of the paper is to analyse and evaluate the existing waste management model in the port of Szczecin in the context of circular economy. The expert research carried out is aimed, inter alia, at identifying which of the solutions currently in use need to be improved from an environmental...
-
LEVEL OF DETAIL CATEGORIZATION FOR THE APPLICATION IN URBAN DESIGN
PublikacjaUrban planning and urban design involve complex processes that require detailed information about the visual information of a place at various scales. Different graphic tools, such as game engines, are evolving to use urban representation fields. The concept of "level of detail" (LOD) has been used to categorize the level of detail in AEC applications such as BIM and GML for urban representation models. However, there is a need...
-
Experiencing the Ocean the Paths for Urban Development of Sao Pedro do Estoril in Lisbon Metropolitan Area
PublikacjaThe areas of Cascais Municipality, one of the richest Municipalities in Portugal, located west to Lisbon, at the estuary of Tagus and the Atlantic Ocean coast is popular tourist destination. With its unique landscape it became the most attractive venue for spending vacations, for sport activities and leisure. It arose around the coastal town of Cascais, the former fishing village famous as a refuge for notables and claiming to...