Wyniki wyszukiwania dla: experimental investigations
-
Advanced field investigations of screw piles and columns
PublikacjaPrzedstawiono opis badań pali i kolumn wkręcanych na terenowym poletku doświadczalnym, wykonanych w ramach projektu badawczego MNiSW. Badania statyczne pali i kolumn wykonano z zaawansowanym systemem do pomiaru rozkładu siły wzdłuż trzonów. Przedstawiono podstawowe wyniki badań z rozdziałem obciążenia na podstawę i pobocznicę pali i kolumn.
-
Investigations of Titanium Implants Covered with Hydroxyapatite Layer
PublikacjaTo reduce unfavorable phenomena occurring after introducing an implant into human body various modifications of the surface are suggested. Such modifications may have significant impact on biocompatibility of metallic materials. The titanium and it's alloys are commonly used for joint and dental implants due to their high endurance, low plasticity modulus, good corrosion resistance as well as biocompatibility. Special attention...
-
Investigations of resonance effects during silo flow.
PublikacjaOmówiono problem efektów rezonansowych podczas przepływu materiału sypkiego w silosie. Wykonano badania doświadczalne w dużych i małych silosach. Obliczenia MES wykonano dla płaskiego stanu odkształcenia. Zachowanie materiału sypkiego było modelowane mikropolarnym sprężysto-plastycznym prawem wg Mh hausa. W obliczeniach uwzględniono wpływ ścian. Wyniki numeryczne porównano z doświadczeniami w dużych i małych silosach.
-
EXPERIMENTAL AND NUMERICAL STUDY ON COLLISIONS BETWEEN STEEL STRUCTURES UNDER EARTHQUAKE EXCITATION
PublikacjaIn the time of high urbanization, the need to build closely-spaced structures forces the designers to take into account earthquake-induced collisions between adjacent buildings and their effects on the response of structures. Past and recent investigations confirmed that interactions between adjacent buildings during earthquakes may cause serious damages to the structural elements and may even lead to total collapse of the structure....
-
Some Aspects of Designing Nozzle Segments of Axial Microturbines,
PublikacjaIn the paper a multi-stage micro-turbine with partial admission of all the stages is described in detail and the results of the numerical calculations and experimental investigations are presented, followed by an appropriate discussion and conclusions.
-
The value of independent investigations within integrated transport safety systems
PublikacjaThe importance of independent investigations into the causes of transport accidents is still underestimated in poland in the same way as the right of society to adequate information on safety. Meanwhile international experience shows that they can effectively improve safety by reducing the costs, enhancing the transfer of safety lessons between different modes of transport, facilitating the advancement of new and innovative investigation...
-
Rotordynamic characteristics of a chamber seal
PublikacjaThe paper presents the results of numerical and experimental investigations into pressure forces generated in a turbine labyrinth seal of a modernized type. The experiments were performed on a single-stage air model turbine of the impulse type. The experiments were performed on a single-stage air model turbine of the impulse type. The experimental data were compared with theoretical results obtained by means of CFD Fluent Code....
-
The dynamic performance analysis of the Micro-turbine's rotor supparted on slide and roling element bearings
PublikacjaThis article presents the results of investigations of dynamic characteristics of a small-dimension rotor with slide and rolling element bearings. The object of investigations was the rotor-bearing system designed for the ORC based low-power steam micro-turbine. The investigations were performed using MESWIR series programs, as well as commercial FEA software ABAQUS and MADYN 2000. The results of modal analysis of the micro-rotor...
-
Heat recovery from the hybrid photovoltaic tile – experimental studies with the solar light simulator
PublikacjaConsidering the current development of micro-cogeneration energy sources, supported by the national prosumer policy and the act on the renewable energy sources, there is a great demand for the effective solar technologies. In this area, the photovoltaic cells with a combined conversion of the solar radiation energy into the electrical and thermal energy (PV/T cells) seem to be attractive. They are already widely available and treated...
-
Impedance Investigations of the Mechanism of Oxygen Evolution on Composite Electrodes
Publikacja -
Irradiation investigations for TESLA and X-FEL experiments at DESY
Publikacja -
Investigations of a membrane distillation pilot plant with a capillary module
Publikacja -
Investigations of speech signal parameters with regard to articulation influences
PublikacjaW pracy zostało podjęte zagadnienie parametryzacji sygnału mowy w kontekście ekstrakcji cech biometrycznych. Analizowane parametry to parametry cepstralne (cepstrum liniowe i mel-cepstrum, czyli MFCC), parametry liniowej predykcji (LPC) oraz momenty widmowe i parametr F0. Zastosowano analize w krótkich stałych segmentach sygnału z zastosowaniem dużego zakładkowania, tzw. ''implicite segmentation''. Umożliwiło to zaobserwowanie...
-
Impact of isoflavone genistein on psoriasis in in vivo and in vitro investigations
Publikacja -
Naval electromagnetic compatibility investigations by use of topological model
PublikacjaPublikacja przedstawia zagadnienie uwarunkowań kompatybilnościowych na statkach. Ze względu na trudności jakie stwarza analiza EMC dużych obiektów, środowisko elektromagnetyczne okrętów jest zwykle dzielone na fragmenty analizowane oddzielnie. Referat przedstawia topologiczny model środowiska elektromagnetycznego w formie macierzowej, który pozwala na kompleksową analizę zagadnień kompatybilnościowych wielu systemów pracujących...
-
Zooplankton in the investigations of mercury in the nearshore waters of the Gulf of Gdansk
Publikacja -
Metallographic investigations of joints obtained by local cavity method
PublikacjaPrzeprowadzono mikro- i makroskopowe badania metalograficzne złączy wykonanych pod wodą metodą lokalnej komory suchej. Wyniki badań wskazują, że w SWC mogą tworzyć się kruche struktury hartownicze. Również wyniki badań twardości potwierdzają niekorzystny wpływ środowiska wodnego na spawalność stali.
-
Investigations of scattering from arbitrary configuration of elliptical obstacles
PublikacjaW niniejszym artykule przedstawiono nową metodę analizy rozpraszania fali e-m. na dowolnej konfiguracji metalowych obiektów cylindrycznych. Przedstawiona metoda oparta jest na wykorzystaniu macierzy rozpraszania T opisującej obiekty eliptyczne oraz zastosowaniu metody iteracyjnej do analizy dowolnej konfiguracji obiektów. Otrzymane wyniki numeryczne porównano z wynikami uzyskanymi w komercyjnym symulatorze e-m.
-
Results of investigations of the fault arc in L. V. Switchgears
PublikacjaOmówiono wyniki badań eksperymentalnych wyłączania 3 fazowych zwarć łukowych w rozdzielnicach niskonapięciowych za pomocą aparatów umieszczanych jedynie w środkowej fazie płaskiego układu szyn zbiorczych. ...
-
Investigations of welded joints of dissimilar heat resistant steels.
PublikacjaPrzeprowadzono badania metalograficzne połączeń spawanych różnorodnych stali żarowytrzymałych rur o przekroju 31,8x7,1 mm ze stali 10H2M z blachą ze stali 20H23N18. Badania makro- i mikrostruktury złączy spawanych wykazały, że istotnym czynnikiem wpływającym na właściwości mechaniczne złącza jest obecność wad takich jak pory lub wtrącenia żużla. Te nieciągłości w materiale powodują koncentrację naprężeń i powstawanie mikropęknięć.
-
Theoretical investigations into flows in rotor blade shroud clearance
PublikacjaPrzedstawiono wyniki obliczeń programem Fluent przepływów w uszczelnieniu nadbandażowym stopnia turbinowego przy różnym mimośrodowym położeniu osi wirnika względem osi korpusu. Wyznaczone numerycznie rozkłady ciśnienia w uszczelnieniu i generowane tam siły aerodynamiczne porównano z rezultatem badań przeprowadzonych na powietrznej turbinie modelowej.
-
Tracer investigations of dynamic properties of fluid flow reactor.
PublikacjaOmówiono podstawowe metody opisu rozkładu czasu przebywania cieczy w reaktorze oraz sposób jego wyznaczania metodą znacznikową. Szczegółowo omówiono wyniki badań laboratoryjnych dla separatora substancji olejowych i dla złoża biologicznego.
-
Numerical investigations of the nonlinear waves generation in a bubble layer
PublikacjaRozważano zagadnienie propagacji fal różnych częstotliwości wewnątrz warstwy z pęcherzykami. Przedstawiono model matematyczny zjawiska oraz wyniki badań teoretycznych. Badano zmiany widma fali bieżącej i odbitej jak również zmiany amplitud wybranych harmonicznych ciśnienia tych fal w funkcji grubości warstwy i koncentracji pęcherzyków.
-
Mechanical and structural investigations of wings of selected insect species
PublikacjaThis paper presents research and measurements leading to obtaining the Young’s modulus of wing bearing structures of selected insect species. A small testing machine intended for three-point bending and equipped with instruments registering low forces was constructed for the needs of the experiment. The machine was used to perform numerous bending tests of wings of three species of insects (obtained from a breeding farm): Attacus...
-
Experimental Verification of Storm Sewer Transient Flow Simulation
PublikacjaThe paper focuses mainly on laboratory investigations of transient and transcritical flow in a single pipe of a sewer system. The aim of this paper is to present a comparison between pressure values calculated by an improved McCormack scheme and those measured at the hydraulic laboratory of the Gdansk University of Technology, which were observed inside a pipe in an experiment for water flow with pressurization. The analysis proves...
-
Diagnostics of bolted lap joint using guided wave propagation
PublikacjaThe paper presents numerical and experimental analyses of elastic waves propagation in a bolted lap joint. In experimental investigations condition assessment of the joint was performed with the use of symmetric waves excited by a piezoactuator. Numerical calculations were conducted in commercial finite element method software Abaqus. The influence of number of bolts and the value of the initial stress on recorded signals was examined....
-
Application of multisine nanoscale impedance microscopy to heterogeneous alloy surface investigations
PublikacjaIn the recent years atomic force microscopy is recognized as valuable tool for investigation of surficial features of construction materials. It concerns, among other things, studies of changes caused by such phenomena as galvanic corrosion, passivation associated with the growth of oxide layers, or sensitization of austenitic steels with the formation of carbide phases. In addition, atomic forcemicroscopy allows easy coupling...
-
Novel fast non-linear electrochemical impedance method for corrosion investigations
PublikacjaThe paper presents a novel approach to corrosion rate monitoring using non-linear electrochemical impedance spectroscopy. The authors propose a new variant of non-linear impedance measurement using amplitude-modulated multi-frequency ac perturbation signal. It allows shortening of measurement duration so it is possible to monitor corrosion rate of the systems experiencing rapid changes. In this way a limitation resulting from lack...
-
Electrochemical investigations of Al–Mg alloy subjected to tensile test
Publikacja -
Investigations of pitting corrosion of magnesium by means of DEIS and acoustic emission
Publikacja -
Electrochemical investigations of Al-Mg alloy subjected to tensile test
PublikacjaWykonano pomiary elektrochemiczne stopu typu Al-Mg podczas badań mechanicznych polegających na rozciąganiu badanych próbek. W trakcie badań mechanicznych wykonywano badania za pomocą metody dynamicznej spektroskopii impedancyjnej (DEIS). Stwierdzono, że podczas realizacji rozciągania próbek zachodzi proces pękania warstwy pasywnej w wyniku którego rozpoczynają się procesy korozyjne. W zakresie plastycznym podczas rozciągania zarejestrowano...
-
Application of Artificial Neural Networks in Investigations of Steam Turbine Cascades
PublikacjaZaprezentowano wyniki badań numerycznych zastosowania sieci neuronowych przy obliczeniach przepływów w palisadach turbin parowych. Na podstawie uzyskanych wyników wykazano, że sieci neuronowe mogą być używane do szacowania przestrzennego rozkładu parametrów przepływu, takich jak entalpia, entropia, ciśnienie czy prędkość czynnika w kanale przepływowym. Omówiono również zastosowania tego typu metod przy projektowaniu palisad, stopni...
-
Spectroscopic investigations into degradation of polymer membranes for fuel cells applications
Publikacja -
Symmetrical and unsymmetrical azomethines with thiophene core: structure–properties investigations
Publikacja -
Spectroscopic and Physicochemical Investigations of Azomethines with Triphenylamine Core towards Optoelectronics
Publikacja -
Theoretical and Measurement Investigations of DS CDMA Signal Detection Problem
PublikacjaPrzedstawiono opis teoretyczny wybranej motody wykrywania sygnałów z widmem rozproszonym DS CDMA. Przedstawiono prototypowe stanowisko laboratoryjne do wykrywania sygnałów DS CDMA i zaprezentowano wyniki pomiarowe.
-
Complex investigations of structural and thermal properties of silica-titania adsorbents
Publikacja -
Impedance investigations of amperometric gas sensor containing aprotic solvent
PublikacjaSkonstruowany został amperometryczny czujnik gazowy w układzie trójelektrodowym ze złotą elektrodą roboczą bezpośrednio napyloną na membranę Nafionową. W publikacji przedstawiono wyniki badań charakterystyk czujnika do oznaczania ditlenku siarki wypełnionego elektrolitem zawierającym różne względne zawartości DMSO/H2O. Wyniki badań impedancyjnych zostały przeanalizowane w oparciu o zaproponowany elektryczny układ zastępczy.
-
An application of simulation investigations in design procedures of shippower system automation
PublikacjaPrzedstawiono wyniki prac dotyczące zastosowania badań symulacyjnych systemów energetycznych statków w środowisku programowym systemu ekspertowego. Wyniki badań symulacyjnych są źródłem głębokiej wiedzy dla systemu ekspertowego dotyczącej oceny spełnienia kryteriów towarzystw klasyfikacyjnych statków. Wybrane sesje symulacyjne podsystemu napędu głównego statku zostały przedstawione i omówione.
-
Spectrophotometric Investigations of Nitrobenzene Liquid Membrane Oscilator With Hexadecyltrimethylammonium Bromide.
PublikacjaPrzedstawiono osylacje różnicy potencjału między fazami wodnymi oscylatora z membraną ciekłą zawierającego kationowy surfaktant. Ustalno zmiany stężeń nitrobenzenu i kwasu pikrynowego w czasie procesu metodą spektrafotometryczną. Stwierdzono, że nitrobenzen przechodzi do faz wodnych od początku procesu, zaś anion pikrynowy przechodzi tylko do fazy akceptorowej. W oparciu otrzymane wyniki stwierdzono, że transport składników membrany...
-
Electrochemical investigations on corosivity of de-icing liquids for railway infrastructure
PublikacjaThe paper presents the results of electrochemical tests of the de-icing fluid for railway infrastructure. DC and AC electrochemical tests were performed to determine the corrosion rates of structural steel, cast iron and aluminium in the newly produced fluid. The results were compared with the corrosion rates of the same materials in the fluid without corrosion inhibitors. The obtained test results indicate a low corrosion risk...
-
Numerical investigations on early indicators of fracture in concrete at meso-scale.
PublikacjaFracture is a major reason of the global failure of concretes. The understanding of fracture is important to ensure the safety of structures and to optimize the material behaviour. In particular an early prediction possibility of fracture in concretes is of major importance. In this paper, concrete fracture under bending was numerically analysed using the Discrete Element Method (DEM). The real mesoscopic structure of a concrete...
-
Experimental Studies of Concrete-Filled Composite Tubes under Axial Short- and Long-Term Loads
PublikacjaThe paper presents experimental studies on axially compressed columns made of concrete-filled glass fiber reinforced polymer (GFRP) tubes. The infill concrete was C30/37 according to Eurocode 2. The investigated composite pipes were characterized by different angles of fiber winding in relation to the longitudinal axis of the element: 20, 55 and 85 degrees. Columns of two lengths, 0.4 m and 2.0 m, were studied. The internal diameter...
-
Symmetrical power line conditioner - basic properties
PublikacjaIn this paper the basis of analytical modelling of the UPQC arrangements (Unified Power Quality Conditioner) in d-q rotating coordinates, as well as select results of investigations conducted on the simplified small power laboratory model, were talked over. In short form power balance as well as fundamental dependences and analytical model with regard of decoupling circuits, were investigated. Applied method for DC link capacitance...
-
Analysis of IMS/NGN Call Processing Performance Using Phase-Type Distributions Based on Experimental Histograms
PublikacjaThe paper describes our further research done with the proposed analytical and simulation traffic models of the Next Generation Network (NGN), which is standardized for delivering multimedia services with strict quality and includes elements of the IP Multimedia Subsystem (IMS). The aim of our models of a single IMS/NGN domain is to evaluate two standardized call processing performance parameters, which appropriate values are very...
-
Experimental study on single phase operation of microjet augmented heat exchanger with enhanced heat transfer surface
PublikacjaThe article presents experimental investigations on a prototype heat exchanger. Presented research is focused on combined active and passive enhancement techniques of surface modification and microjet impingement. The results were compared to reference plate heat exchanger without microjet impingement. The Wilson plot method was applied to determine the heat transfer coefficients in the single phase operation. The heat exchanger...
-
Problems of collisions between adjacent steel structures under earthquake excitation
PublikacjaNowadays, the high level of urbanization forces the designers to design closely-separated structures and to take into account many factors influencing the response of these structures, which may collide due to insufficient separation distance during moderate to strong ground motions. Recent observations as well as numerical and experimental investigations have confirmed that the interactions between structures may lead to significant...
-
Modelling of in-plane wave propagation in a plate using spectral element method and Kane-Mindlin theory with application to damage detection
PublikacjaThis paper presents results of experimental and numerical analyses of in-plane waves propagatingin a 5 mm-thick steel plate in the frequency range of 120-300 kHz. For such a thickness/frequency ratio,extensional waves reveal dispersive character. To model in-plane wave propagation taking into account thethickness-stretch effect, a novel 2D spectral element, based on the Kane-Mindlin theory, was formulated. Anapplication of in-plane...
-
Performance Characteristics of a Micro-Turbine
PublikacjaIn the paper a design of a multi-stage micro-turbine with partial admission of all the stages is described in detail and the results of particular experimental investigations and numerical calculations are shown, followed by conclusions. The co-generative micro-power plant with the HFE7100 as a working medium was designed and built for experimental investigations. The values of the main cycle parameters were as follows:heat output:...
-
Performance Characteristics of a Micro-turbine, International
Publikacja. In the paper a design of a multi-stage micro-turbine with partial admission of all the stages is described in detail and the results of particular experimental investigations and numerical calculations are shown, followed by conclusions. The co-generative micro-power plant with the HFE7100 as a working medium was designed and built for experimental investigations. The values of the main cycle parameters were as follows:- heat...