displaying 1000 best results Help
Search results for: COARSE-DISCRETIZATION SIMULATION
-
Numerical simulation of the influence of the selected factors on the performance of a concrete road barrier H2/W5/B
PublicationThis paper discuss the influence of selected factors on the performance of a concrete road barrier H2/W5/B. Modelling techniques of a concrete road safety system were briefly discussed. Comparison to the full scale crash test results has been shown. The concrete road safety barrier has been investigated for evaluation of the overall damage after collision under various initial conditions. The failure assessment criterion has been...
-
Structure, luminescent properties and FDTD simulation of TeO2-BaO-Bi2O3-Ag:Ln3+ glass-ceramics system
PublicationTeO2-BaO-Bi2O3-Ag glass systems (TBB) co-doped with terbium and europium ions have been successfully synthesized through conventional melt-quenching technique. Heat treatment procedure at 350 °C has been conducted in order to synthesize silver nanoparticles embedded in TBB glass matrix. Structural measurements involved XRD studies that revealed no crystallization of glass structure after heat treatment at elevated temperatures....
-
Expedited Simulation-Driven Multi-Objective Design Optimization of Quasi-Isotropic Dielectric Resonator Antenna
PublicationMajority of practical engineering design problems require simultaneous handling of several criteria. Although many of design tasks can be turned into single-objective problems using sufficient formulations, in some situations, acquiring comprehensive knowledge about possible trade-offs between conflicting objectives may be necessary. This calls for multi-objective optimization that aims at identifying a set of alternative, Pareto-optimal...
-
Modelling and Simulation in Engineering
Journals -
MATHEMATICS AND COMPUTERS IN SIMULATION
Journals -
Jacek Tomków dr hab. inż.
PeopleEducation:1. 2018 - Ph.D. of Technical Sciencesin field of Materials Engineeringthesis: Influence of underwater welding conditions on cold cracking of high strength low alloy steel 2. 2012 - Master of Science Engineer, Gdansk University of Technologyin the field of: Mechanical Engineeringwith specialization in: Manufacturing Engineering and Computer Aided Manufacturing Processesthesis: Non-destructive testing of welding joints...
-
An insight into the mixed quantum mechanical-molecular dynamics simulation of a ZnII-Curcumin complex with a chosen DNA sequence that supports experimental DNA binding investigations
PublicationAn important aspect of research pertaining to Curcumin (HCur) is the need to arrest its degradation in aqueous solution and in biological milieu. This may be achieved through complex formation with metal ions. For this reason, a complex of HCur was prepared with ZnII, that is not likely to be active in redox pathways, minimizing further complications. The complex is monomeric, tetrahedral, with one HCur, an acetate and a molecule...
-
Numerical Simulation of Catastrophic Flood: the Case Study of Hypothetical Failure of the Bielkowo Hydro–Power Plant Reservoir
PublicationThe numerical modeling of flood wave propagation following the hypo-thetical breaks of the embankments of the Bielkowo hydro–power plant storage reservoir (Kolbudy II Reservoir) on the Radunia River in Poland have been presented. The results of computations were used to estimate the parameters of the flood waves, which are indispensable for the flood zone determination and mapping and then for the flood risk analysis. When estimating...
-
Verification of geotechnical numerical simulations by model tests using PIV technique. Part II Numerical Simulation
PublicationPrzedstawiono zakres i wyniki symulacji numerycznych stateczności fundamentów bezpośrednich posadowionych w sąsiedztwie kątowych ścian oporowych. Wyniki symulacji numerycznych zweryfikowano na podstawie wyników badań modelowych z uwzględnieniem techniki PIV przedstawionych w części I niniejszego artykułu. W obliczeniach numerycznych wykorzystano trzy kryteria wytrzymałości gruntu na ścinanie: Coulomba - Mohra, Matsuoki - Nokaiego...
-
Component Based Flight Simulation in DIS Systems.Komponentowy model symulacji obiektów latających w systemach DIS.
PublicationInteraktywna symulacja rozproszona stanowi interesującą klasę systemów informacyjnych łączących kilka dziedzin informatyki pozwalających każdemu obiektowi na indywidualne symulowanie dla wizualizacji dynamicznego stanu wszystkich uczestniczących w symulacji obiektów rozproszonych. Obiekty są nieprzewidywalne, z tego powodu istnieje konieczność ciągłej wymiany informacji o ich stanie na potrzeby poprawnej wizualizacji 3D sceny z...
-
Efficient Simulation-Based Global Antenna Optimization Using Characteristic Point Method and Nature-Inspired Metaheuristics
PublicationAntenna structures are designed nowadays to fulfil rigorous demands, including multi-band operation, where the center frequencies need to be precisely allocated at the assumed targets while improving other features, such as impedance matching. Achieving this requires simultaneous optimization of antenna geometry parameters. When considering multimodal problems or if a reasonable initial design is not at hand, one needs to rely...
-
Globalized Knowledge-Based Simulation-Driven Antenna Miniaturization Using Domain-Confined Surrogates and Dimensionality Reduction
PublicationDesign of contemporary antenna systems encounters multifold challenges, one of which is a limited size. Compact antennas are indispensable for the new fields of application such as inter-net of things or 5G/6G mobile communication. Still, miniaturization generally undermines elec-trical and field performance. When attempted through numerical optimization, it turns into a constrained problem with costly constraints requiring electromagnetic...
-
MARSTRUCT benchmark study on nonlinear FE simulation of an experiment of an indenter impact with a ship side-shell structure
PublicationThis paper presents a benchmark study on collision simulations that was initiated by the MARSTRUCT Virtual Institute. The objective was to compare assumptions, finite element models, modelling techniques and experiences between established researchers within the field. Fifteen research groups world-wide participated in the study. An experiment involving a rigid indenter penetrating a ship-like side structure was used as the case...
-
Modeling, simulation, and validation of a TB41 crash test of the H2/W5/B concrete vehicle restraint system
PublicationThe paper addresses numerical simulations of a concrete vehicle restraint system. The model is described in detail. The advanced material law of the continuous surface cap model was used to analyze the damage locations in concrete barrier segments. The results were validated against the TB41 full-scale crash test. The test was conducted in compliance with European standard EN 1317, and the validation was performed in accordance...
-
Multi-objective design of miniaturized impedance transformers by domain segmentation
PublicationFast multi-objective design optimization of compact microstrip impedance transformers is discussed. Our approach exploits approximation models constructed using sampled coarse- mesh EM simulation data in a partitioned design space and response correction techniques for design refinement. Demonstra
-
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION
Journals -
The Impact of Selected Parameters on the efficiency of PV Installations - Simulation Test of the 1 MW PV Farm in the PVSyst Program
Publication -
Numerical Simulation and Experimental Analysis of Thermal Cycles and Phase Transformation Behavior of Laser-Welded Advanced Multiphase Steel
Publication -
New trim configurations for laser trimmed thick-film resistors - theoretical analysis, numerical simulation and experimential verification
PublicationW pracy przedstawiono nowe podejście do korekcji rezystorów warstwowych polegające na wytwarzaniu dodatkowego kontaktu w celu rozszerzenia zakresu korekcji i uproszczenia projektowania. Ponadto zaprezentowano nową szybką metodę wyznaczania charakterystyk korekcyjnych a także weryfikację eksperymentalną. Przedstawiono wyniki w postaci zakresów korekcji i względnych przyrostów rezystancji w funkcji kształtu dodatkowego kontaktu oraz...
-
Comparison of two model concepts for simulation of nitrogen removal at a full-scale biological nutrient removal pilot plant
PublicationCelem badań było porównanie zdolności predykcyjnych dwóch mechanistycznych modeli procesu osadu czynnego (ASM1 i ASM3). W tym celu wykorzystano bazę danych empirycznych z pilotowej oczyszczalni ścieków Gummerwald w Hanowerze (Niemcy). Oba badane modele prognozowały szczytowe stężenia azotu amonowego na poziomie >8 gN/m3 w ciągu, którego obciążenie hydrauliczne wzrastało czterokrotnie w porównaniu do okresu bezdeszczowego. Prognozowany...
-
Comparison the heat load as the results of tests on human subject in a hot environment with the results obtained from numerical simulation
Publication -
Cutting forces and temperature measurements in cryogenic assisted turning of AA2024-T351 alloy: An experimentally validated simulation approach
Publication -
Simulation of static response of thin walled bars with changed design parameters by means of second order sensitivity analysis.
PublicationZa pomocą analizy wrażliwości drugiego rzędu wyznaczono przybliżone wartości sił wewnętrznych i przemieszczeń pręta cienkościennego dla zmieniających się parametrów projektowych. W przykładzie numerycznym wyznaczono pierwszą i drugą wariację bimomentu w funkcji grubości półek skręcanego dwuteownika. Zbadano dokładność rozwiązania uzyskanego za pomocą analizy wrażliwości z rozwiązaniem ścisłym.
-
Modeling and simulation of blood flow under the influence of radioactive materials having slip with MHD and nonlinear mixed convection
PublicationRadioactive materials are widely in industry, nuclear plants and medical treatments. Scientists and workers in these fields are mostly exposed to such materials, and adverse effects on blood and temperature profiles are observed. In this regard, objective of the current study is to model and simulate blood based nanofluid with three very important radioactive materials, named as Uranium dioxide (UO2), Thorium dioxide (ThO2) and...
-
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
PublicationThe friction stir welding (FSW) of tool pin geometry plays a critical role in the final properties of the produced joint. The tool pin geometry directly affects the generation of heat and the flow of internal materials during the FSW process. The effects of the FSW tool pin angle on heat generation and internal flow have not been quantitatively investigated in detail. In this manuscript, a validated Computational Fluid Dynamic...
-
Experimental study and numerical simulation on porosity dependent direct reducibility of high-grade iron oxide pellets in hydrogen
PublicationThe transition to more environmentally friendly steel production methods has intensified research into hydrogen-based direct reduction (HyDR) of iron oxide pellets. The aim of this study is to systematically investigate the kinetics of the reduction process, the evolution of porosity and the resulting microstructural changes on the reduction behavior of high-quality pellets during HyDR of iron ore at different temperatures. A modified...
-
Comparison of the exponential thermal transient parameterization methods with the SMTP method in the unipedicled DIEP flap computer modelling and simulation
PublicationThe aim of this paper is to compare the spatial contrast of the image descriptors obtained via three different thermal transient parameterization methods in Active Dynamic Thermography. The thermal constants and amplitude values of the one- and two- exponential parametrization are compared to the Simplified Magnitude-Temporal Parametrization method (SMTP). The comparison is performed using the data obtained by simulating the cold...
-
Variable-Fidelity Simulation Models and Sparse Gradient Updates for Cost-Efficient Optimization of Compact Antenna Input Characteristics
PublicationDesign of antennas for the Internet of Things (IoT) applications requires taking into account several performance figures, both electrical (e.g., impedance matching) and field (gain, radiation pattern), but also physical constraints, primarily concerning size limitation. Fulfillment of stringent specifications necessitates the development of topologically complex structures described by a large number of geometry parameters that...
-
A general method for the derivation of the functional forms of the effective energy terms in coarse-grained energy functions of polymers. III. Determination of scale-consistent backbone-local and correlation potentials in the UNRES force field and force-field calibration and validation
Publication -
Rapid antenna design optimization using shape-preserving response prediction
PublicationAn approach to rapid optimization of antennas using the shape-preserving response-prediction (SPRP) technique and coarsediscretization electromagnetic (EM) simulations (as a low-fidelity model) is presented. SPRP allows us to estimate the response of the high-fidelity EM antenna model, e.g., its reflection coefficient versus frequency, using the properly selected set of so-called characteristic points of the low-fidelity model...
-
<title>Decomposition of MATLAB script for FPGA implementation of real time simulation algorithms for LLRF system in European XFEL</title>
Publication -
A Simulation-Optimization Model for Automated Parcel Lockers Network Design in Urban Scenarios in Pamplona (Spain), Zakopane, and Krakow (Poland)
Publication -
Comparison of Miller laryngoscope and UEScope videolaryngoscope for endotracheal intubation in four pediatric airway scenarios: a randomized, crossover simulation trial
Publication -
Influence of gas turbine controller adjustment on propulsion system behaviour in high sea conditions. Part 2. The simulation investigations.
PublicationDo badań przyjęto układ napędowy okrętowy z turbinami gazowymi napędzającymi poprzez przekładnię mechaniczną zębatą śrubę okrętową o zmiennym skoku.Przy użyciu programu komputerowego Matlab i jego nakładki Simulink wykonano symulację dynamiki układu napędowego statku pracującego na wzburzonym morzu.Zbadano wpływ nastaw i typu regulatora na pracę układu. Porównano nastawy układu regulacyjnego układu napędowego dla pracy...
-
Tailoring optical constants of few-layer black phosphorus coatings: Spectroscopic ellipsometry approach supported by ab-initio simulation
Publication2D black phosphorus (BP) has attracted extensive attention as an anisotropic platform for novel optoelectronic and polarizing optics applications. Insight into the factors that tune the optical and polarizing properties of 2D BP reveals their essential influence on BP-based photonic and optoelectronic devices. In this work, studies of the optical constants of few-layer black phosphorus coatings are studied and discussed, with particular...
-
The coexistence and competition of canonical and comammox nitrite oxidizing bacteria in a nitrifying activated sludge system – Experimental observations and simulation studies
PublicationThe second step of nitrification can be mediated by nitrite oxidizing bacteria (NOB), i.e. Nitrospira and Nitrobacter, with different characteristics in terms of the r/K theory. In this study, an activated sludge model was developed to account for competition between two groups of canonical NOB and comammox bacteria. Heterotrophic denitrification on soluble microbial products was also incorporated into the model. Four 5-week washout...
-
Sano-Tachiya-Noolandi-Hong, Onsager and Braun models vs Monte Carlo simulation of charge photogeneration in organic solids
PublicationThe Sano-Tachiya-Noolandi-Hong (STNH), Onsager, and Braun models as well as Monte Carlo (MC) simulations of charge recombination/separation have been applied for the first time to reproduce the results of the electromodulated photoluminescence measurements in vacuum-evaporated films of fluorescent materials commonly used in optoelectronic devices. The values of the electron-hole pair final recombination speed in the monomer emitters:...
-
International Journal of Simulation Modelling
Journals -
Krzysztof Jan Kaliński prof. dr hab. inż.
PeopleKrzysztof J. Kaliński completed his MSc study at Gdańsk University of Technology (GUT) Faculty of Production Engineering (1980, result – get a first). He obtained PhD at GUT Faculty of Machine Building (1988, result – get a first), DSc at GUT Faculty of Mechanical Engineering (ME) (2002, result – get a first), and professor’s title – w 2013 r. In 2015 r. he became full professor.His research area includes: theoretical and applied...
-
Michał Mazur dr inż.
PeopleAktualne zainteresowania inżynieria mechaniczna, robotyka, drgania mechaniczne, analiza modalna, sterowanie, systemy czasu rzeczywistego Wybrane publikacje Kaliński K., Galewski M., Mazur M., Chodnicki M, 2017, Modelling and Simulation Of A New Variable Stiffness Holder for Milling Of Flexible Details, Polish Maritime Research, vol 24, ss. 115-124 Kaliński K. J., Mazur M.: Optimal control at energy performance index of the mobile...
-
FEM Analysis of Multi Storied RC Structure using (E-TAB simulation ) and Need of High rise structures in Developing Countries
Publication -
Cementless controlled low-strength material (CLSM) based on waste glass powder and hydrated lime: Synthesis, characterization and thermodynamic simulation
Publication -
A Dynamic Forecast Demand Scenario Analysis to Design an Automated Parcel Lockers Network in Pamplona (Spain) Using a Simulation-Optimization Model
Publication -
Comparison of Macintosh and Intubrite laryngoscopes for orotracheal intubation by nurses during resuscitation: preliminary data of a randomized crossover simulation-based study
Publication -
Characteristics of hydration water around hen egg lysozyme as the protein model in aqueous solution. FTIR spectroscopy and molecular dynamics simulation
PublicationW niniejszej pracy przedstawiono wyniki badań dotyczące hydratacji białka modelowego - lizozymu z jaja kurzego w roztworze wodnym. Wiodącą techniką stosowaną w badaniach była spektroskopia oscylacyjna FTIR z zastosowaniem techniki rozcieńczenia izotopowego wody półciężkiej HDO w roztworze wody zwykłej. Analiza widma HDO przy pomocy "metody widm zaburzonych" pozwoliła na wyizolowanie widma wody zaburzonej przez lizozym, a tym samym...
-
Tackling Air Pollution in Cities with Modelling and Simulation: Remote Group Model Building as an Educational Tool Supporting System Dynamics Modelling
Publication -
Influence of gas turbine controller adjustment on ship propulsion system behaviour in rough sea conditions. Part 2. The simulation investigations.
PublicationPrzedstawiono model dynamiki układu napędowego okrętowego, wykorzystując metodę elementów skończonych. Układ napędowy składa się z dwóch turbin gazowych napędzających poprzez przekładnię mechaniczną zębatą pędnik o nastawnym skoku. W symulacji układu napędowego zadawano wymuszenia wartością zadaną nastaw prędkości na regulatorze oraz wymuszenia od falowania morza w zależności od stanu morza. Przedstawiono wyniki takich symulacji.
-
Nonlinear harmonic amplitudes in air coils above and below a metal plate as a function of tensile strength via finite element simulation.
PublicationOpisano wyniki obliczeń numerycznych (symulacja metodą MES) wpływu naprężeń na amplitudy nieliniowych harmonicznych napięcia indukowanego w cewkach powietrznych umieszczonych nad i pod płytą.
-
Behawioralne modelowanie i symulacja tranzystorów IGBT w układach energoelektronicznych = Behavioural modeling and simulation of IGBT transistors in power electronics systems
PublicationW referacie przedstawiono rezultaty prac nad modelem tranzystora bipolarnego z izolowaną bramką (IGBT), przydatnym w symulacjach układów energoelektronicznych wymagających odwzorowania zarówno stanów ustalonych jak i dynamicznych przy przełączaniu. Rozważono behawioralny model IGBT o reprezentacji za pomocą równań stanu przy wykorzystaniu katalogowych charakterystyk statycznych oraz nieliniowych aproksymacji pojemności pasożytniczych....
-
The flow of nitrogen into the euphotic zone of the Baltic Proper as a result of the vertical migration of phytoplankton: An analysis of the long-term observations and ecohydrodynamic model simulation
Publication