Filters
total: 4077
-
Catalog
displaying 1000 best results Help
Search results for: METASURFACES , SURROGATE MODELING , SCATTERING MANIPULATION , CHECKERBOARD CONFIGURATION , RADAR CROSS-SECTION (RCS)
-
Modeling of a Quasi-Resonant DC Link Inverter Dedicated to Common-Mode Voltage and Ground Current Reduction
PublicationIn this paper, the modeling methodology of the AC drive system with a Parallel Quasi-Resonant DC Link Inverter (PQRDCLI) is described. A presented modeling approach is an attractive tool used for the effective evaluation of a common-mode (CM) voltage and grounds current reduction methods. Designed models of inverter, induction machine (IM), and cable are simple, thus the methods for parameter extraction are not complicated. Verification...
-
Interrelationship between total volatile organic compounds emissions, structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides
PublicationNatural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170°C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements,...
-
Social Capital, Human Capital, Tacit Knowledge, and Innovations: A Polish-US Cross-Country Study
PublicationThis study measures the relationship between human and social capital (internal and external) and tacit knowledge sharing's influence on innovativeness among knowledge workers employed in Polish (n=1050) and US (n=1118) organizations. The structural equation modeling method revealed that internal social capital matters more for organizational innovativeness in the US. In Poland, both external and internal were important. Specifically,...
-
Cold plasma treatment of tannic acid as a green technology for the fabrication of advanced cross-linkers for bioactive collagen/gelatin hydrogels
PublicationTannic acid (TA) is a natural compound studied as the cross-linker for biopolymers due to its ability to form hydrogen bonds. There are different methods to improve its reactivity and effectiveness to be used as a modifier for biopolymeric materials. This work employed plasma to modify tannic acid TA, which was then used as a cross-linker for fabricating collagen/gelatin scaffolds. Plasma treatment did not cause any significant...
-
Open Data Capability Architecture - An Interpretive Structural Modeling Approach
PublicationDespite of increasing availability of open data as a vital organizational resource, large numbers of startups and organizations fail when it comes to utilizing open data effectively. This shortcoming is attributable to the poor understanding of what types of capabilities are required to successfully conduct data related activities. At the same time, research on open data capabilities and how they relate to one another remains sparse....
-
Injectable bone cement based on magnesium potassium phosphate and cross-linked alginate hydrogel designed for minimally invasive orthopedic procedures
PublicationBone cement based on magnesium phosphate has extremely favorable properties for its application as a bioactive bone substitute. However, further improvement is still expected due to difficult injectability and high brittleness. This paper reported the preparation of novel biocomposite cement, classified as dual-setting, obtained through ceramic hydration reaction and polymer cross-linking. Cement was composed of magnesium potassium...
-
An interactive system for remote modeling and design validation of hybrid photovoltaic systems
PublicationAbstract: A multi-functional demonstrator of the interactive system is presented. The demostrator enables modeling, monitoring and design validation of hybrid photovoltaic systems assisted by fuel cells and thermoelectric generators, as well as experimentation and scientific research. A block diagram of the system is presented and the selection of its components is discussed. Availability of the system via Ethernet or GSM...
-
Inverse Modeling and Optimization of CSRR-based Microwave Sensors for Industrial Applications
PublicationDesign optimization of multivariable resonators is a challenging topic in the area of microwave sensors for industrial applications. This paper proposes a novel methodology for rapid re-design and parameter tuning of complementary split-ring resonators (CSRRs). Our approach involves inverse surrogate models established using pre-optimized resonator data as well as analytical correction techniques to enable rapid adjustment of geometry...
-
Creating private and public value in data-related management projects: a cross-border case study from Switzerland and Italy
PublicationThe literature in the field of smart cities shows a continuous emphasis and interest in the topic of big data due to the extensive use of Information and Communication Technologies by public and private institutions within each city. There is undoubtedly value in big data: in data lie insights on the city, its stakeholders, citizens, products, and services. Challenges, though, lie in data’s variety, volume, and velocity, but also...
-
Elimination of clicks from archive speech signals using sparse autoregressive modeling
PublicationThis paper presents a new approach to elimination of impulsivedisturbances from archive speech signals. The proposedsparse autoregressive (SAR) signal representation is given ina factorized form - the model is a cascade of the so-called formantfilter and pitch filter. Such a technique has been widelyused in code-excited linear prediction (CELP) systems, as itguarantees model stability. After detection of noise pulses usinglinear...
-
Jacek Namieśnik prof. dr hab. inż.
PeopleScientific discipline: chemistryRector in 2016-2019 He was born on 10 December, 1949 in Mogilno. He graduated in 1972 at the Faculty of Chemistry at Gdańsk University of Technology, obtaining a master's degree in chemical engineering. In 1972 he started working at Gdańsk University of Technology, where in 1978 he defended his doctoral thesis and in 1985 he completed his habilitation. He was appointed an associate professor in 1991...
-
Modeling the Effects of Slowly Biodegradable Substrate at Large WWTP in Northern Poland
PublicationThe essential study was divided into two parts: experimental investigation and mathematical modeling using special platform to computer simulations. In the first part of research an innovative measurement procedure for an indirect determination of the effect of biodegradable particulate and colloidal Xs substrate was developed and implemented. The results of laboratory tests were used futher to verify the mechanism of the hydrolysis...
-
Design and modeling of reliable networks
Publication-
-
Overview of Fading Channel Modeling
Publication -
Shipyard Crane Modeling Methods
Publication -
Modeling of the denture’s elastic base
Publication -
Reliable Networks Design and Modeling
PublicationSłowo wstępne numeru specjalnego czasopisma Telecommunication Systems Journal
-
Modeling Volunteer Based Systems
PublicationThere are two main approaches to processing tasks requiring high amounts of computational power. One approach is using clusters of mostly identical hardware, placed in dedicated locations [1, 2, 3]. The other approach is outsourcing computing resources from large numbers of volunteers connected to the Internet [7]. This chapter presents an application of a mathematical model of the volunteer computing presented in Volume 1 of this...
-
Usability of UML modeling tools
PublicationNarzędzia wspomagające modelowanie w UML pełnią istotną rolę w procesie wytwarzania i utrzymania oprogramowania. Badanie użyteczności tych narzędzi ma na celu poprawę produktywności oraz satysfakcji z ich użytkowania. W referacie zaprezentowano badania użyteczności za pomocą trzech metod: eksperymentalnego testowania efektywności, zapytań o aspekty użyteczności testowanych narzędzi oraz analitycznej metody GOMS (ang. Goals, Operators,...
-
CULTURAL DETERMINANTS OF EVIDENCE-BASED HUMAN RESOURCES MANAGEMENT: A CROSS-COUNTRY ANALYSIS
PublicationPurpose: This paper aims at providing comparative analysis of the influence of cultural determinants on the managers’ perceptions of human resources management practices, as a factor conditioning application of evidence-based management. Design/methodology/approach: This article presents the study of 121 managers in Poland, on their perception of HRM practices and analyses the consistency of findings with the Hofstede cultural...
-
Iwona Nowakowska dr
PeopleAssistant Professor at The Maria Grzegorzewska University Institute of Psychology. Graduate of Psychology (University of Warsaw, 2019), and PhD in this field (Maria Grzegorzewska University, 2022). Conducted research in the fields of: social and clinical psychology and individual differences. Her current research activity concentrates on prosociality (volunteering, philanthropy, socially responsible behaviors) and their correlates. She...
-
Investigation of Liquid–Gas Flow in a Horizontal Pipeline Using Gamma-Ray Technique and Modified Cross-Correlation
PublicationThis article presents the application of the radioisotope absorption method in the study of two-phase water–air flow in a horizontal pipe. The measurement principle and the test stand are briefly described. The main part of the article presents the signal analysis methods applied to data obtained from scintillation detectors. Because these signals are mostly stochastic waveforms, they were analyzed statistically using the cross-correlation...
-
On Accuracy Modeling of Gas Turbine Cycles by the In-house COM-GAS Code
PublicationIn this paper, a comparison of accuracy modeling of gas turbine cycles between the basic (classical) model and the in-house COM-GAS code has been presented. The basic model uses a semi-perfect gas and well known projecting assumption. On the other hand, the computational flow mechanics (CFM) basis on a real gas by using thermodynamic tables. The thermodynamic analysis of thermal cycles, simply gas cycle GT8C and gas turbine cycle...
-
Modeling of TEC Variations Based on Signals from Near Zenith GNSS Satellite Observed by Dense Regional Network
PublicationCurrently the substantial successes in high-resolution ionospheric mapping is declared in many publications. Nevertheless, up to now there are no examples of dynamic visualization of TEC disturbances on regional scale with as high resolution as tropospheric models. Over the years, ionosphere has been modeling basing on the simple assumption, that it is a thin layer, which surrounds the Earth at some arbitrary height. However, the...
-
Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) in label-free characterization of erythrocyte membranes and extracellular vesicles at the nano-scale and molecular level
Publication -
Construction of an innovative adsorbent bed configuration in the adsorption chiller - Selection criteria for effective sorbent-glue pair
Publication -
Automatic configuration of FMC boards for FPGA-based reconfigurable measurement and control systems with mezzanines in FMC standard
Publication -
Interatomic potential suitable for the modeling of penta-graphene: Molecular statics/molecular dynamics studies
PublicationWe test the potentials available for elemental carbon, with the scope to choose the potential suitable for the modeling of penta-graphene, the latest two dimensional carbon allotrope. By using molecular statics and molecular dynamics simulations we show that there is only one potential e namely the Tersoff-type potential proposed by Erhart and Albe in 2005 e which is able to correctly describe all the important features of penta-graphene....
-
3D Hand Shape Modeling for Automatic Assessing Motor Performance in Parkinson's Disease
PublicationIn this paper a method for hand pattern processing to create a 3D hand model is presented. By applying a complete hand armature to the model obtained, an interpolation of three motor tests for an individual Parkinson's disease patient can be performed. To obtain the 3D hand model the top view of the hand from a web cam is analyzed. The hand contour is examined to find characteristic points that allows for dividing hand image into...
-
Electron collisions with X(CH3)4 molecules (X = C, Si, Ge)
PublicationAbsolute grand-total cross sections (TCSs) for electron scattering from tetramethylmethane [C(CH3)4], tetramethylsilane [Si(CH3)4], and tetramethylgermane [Ge(CH3)4] molecules have been measured at electron-impact energies extending from around 0.5 to 300 eV in the linear electron-transmission experiment. The measured TCS energy dependences show very pronounced broad enhancement, peaking near 5.5 eV for Si(CH3)4 and Ge(CH3)4 molecules...
-
Moment resistance of I-section end-plate roof girder splices; a case study
PublicationThis article deals with the problem of determining the resistance of end-plate connections. A nonlinear FEM model of the joint was constructed in order to predict its carrying capacity. A standard code procedure was done as well. The analyses have been done to assess atypical end-plate joints designed and constructed as a part of roof structures.
-
Building Information Modeling in Small and Middle Sized Buildings – Case Study
PublicationBuilding Information Modeling (BIM) is a technology designed to improve and integrate all engineering aspects in the construction design process. Tools that incorporate the idea of BIM are becoming more advanced and also more popular. Available software solutions have already reached an assumable high level of development, but still are not as widespread and used on nearly as many construction projects as could be expected. Therefore...
-
The influence of small intestinal mucus structure on particle transport ex vivo
PublicationMucus provides a barrier to bacteria and toxins while allowing nutrient absorption and waste transport. Unlike colonic mucus, small intestinal mucus structure is poorly understood. This study aimed to provide evidence for a continuous, structured mucus layer and assess the diffusion of different sized particles through it. Mucus structure was assessed by histology and immunohistochemistry. Ultra-structure was assessed by scanning...
-
Local ordering of nano-structured Pt probed by multiple-scattering XAFS
PublicationW pracy przedstawiono wyniki analizy MS EXAFS krystalicznej platyny i nanostruktur platyny (klastry o rozmiarach od 1nm do 7nm). Rezultaty analizy masowej platyny (uwzględniające rozkłady dwu i trój-ciałowe) są zgodne z wcześniejszymi danymi strukturalnymi i wibracyjnymi i stały się podstawą do realistycznej analizy EXAFS nanocząstek Pt realizownej w połączeniu z wynikami pomiarów TEM, SEM i XRD. Badaniom poddano nanocząstki Pt...
-
Scattering of Dirac particles from nonlocal separable potentials: The eigenchannel approach
PublicationZastosowano nowe sformułowanie metody kanałów własnych [R. Szmytkowski, Ann. Phys. (N.Y.) 311, 503 (2004)] w rozpraszaniu cząstek Diraca na nielokalnych potencjałach separowalnych.
-
Surface-enhanced Raman scattering of water in aqueous dispersions of silver nanoparticles
Publication -
Ab initio and nuclear inelastic scattering studies of Fe3Si/GaAs heterostructures
Publication -
Electromagnetic wave scattering from material objects using hybrid methods
PublicationRozdział zawiera opis hybrydowych metod analizy stanowiących połączenie metody różnic skończonych w dziedzinie częstotliwości (FDFD) z metodą dopasowania rodzajów (MM), służących do badania cylindrycznych struktur falowych w układach zamkniętych i otwartych.
-
Soliton trapping and orthogonal Raman scattering in a birefringent photonic crystal fiber
Publication -
Plasmon and structure resonances in the scattering of light by a periodic chain of silver nanocylinders
Publication -
Elastic electron scattering by argon in the vicinity of the high-energy critical minimum.
PublicationZostały obliczone różniczkowe przekroje czynne na sprężyste rozpraszanie elektronów na argonie. Przedział energetyczny rozpraszanych elektronów został tak dobrany, aby zbadać położenie tzw. minimum krytycznego.
-
Estimation of optical parameters of highly scattering materials by time-of-flight spectroscopy.
PublicationPrzedstawiono metody wyznaczania podstawowych parametrów materiałów silnie rozpraszających światło na podstawie pomierzonego rozkładu czasu przelotu krótkich impulsów laserowych. W algorytmie wykorzystano metodę Monte Carlo i metodę dyfuzji do opisu propagacji światła. Oszacowano dokładność oszacowywania tych parametrów.
-
Zero-range potentials for Direc particles: scattering and related continuum problems
PublicationW pracy przedstawiono rozszerzenie metody potencjałów zerowego promienia, szeroko wykorzystywanej w nierelatywistycznej mechanice , na przypadek cząstek Diraca. Nacisk położono na zagadnienie rozproszeniowe, do analizy którego zastosowano metodę kanałów własnych.
-
Noise Scattering Patterns Method for Recognition of RTS Noise in Semiconductor Components
PublicationOpisano nową metodę identyfikacji i wizualizacji szumów RTS. Metoda ta oparta na graficznym przedstawieniu przebiegu szumowego jest szczególnie użyteczna do szybkiej selekcji elektronicznych elementów półprzewodnikowych. Przedstawiono także rezultaty filtacji medianowej szumu zawierającego składową RTS. Filtrację medianową zastosowano do poprawienia obrazu szumu uzyskanego w wyniku zastosowania metody NSP.
-
Electromagnetic wave scattering by a set of axially symmetric omega-medium cylinder
PublicationZaprezentowano analizę rozproszenia fali elektromagnetycznej od układu obiektów cylindrycznych zbudowanych z materiałów pseudochiralnych, umieszczonych w złączach falowodowych lub wolnej przestrzeni. Analiza bazuje na iteracyjnej procedurze rozproszenia i metodzie dopasowania rodzajów.
-
Lagrangian model of an isolated dc-dc converter with a 3-phase medium frequency transformer accounting magnetic cross saturation
PublicationThis article presents a nonlinear equivalent circuit model of an isolated dc-dc converter with a 3-phase medium frequency transformer. The model takes into account the magnetic cross saturation of the 3-phase core-type magnetic circuit. The model is suitable in detailed electromagnetic transient simulations of power systems involving isolated dc-dc converters. The model is developed using the Lagrange energy method. It involves...
-
Cross-border Cooperation Local Governments in the Euroregion Baltic
Publication...
-
Tracing of the real cross profile of the band saw wheel.
PublicationPrzedstawiono sytem do identyfikacji profilu koła pilarki taśmowej. Wyniki pomiarów profilu rzeczywistego służą jako dane wejściowe dla automatycznych urządzeń naprężających piły sterowanych CNC. Dopasowanie piły do profilu koła ma wpływ na jej zachowanie podczas przecinania.
-
Belarusian – Polish Border: The Politics of Cross-Border Migration
Publication -
Belarusian – Polish Border: The Diplomacy of Cross-Border Migration
Publication