Search results for: ROAD ENGINEERING
-
Acoustic Detector of Road Vehicles Based on Sound Intensity
PublicationA method of detecting and counting road vehicles using an acoustic sensor placed by the road is presented. The sensor measures sound intensity in two directions: parallel and perpendicular to the road. The sound intensity analysis performs acoustic event detection. A normalized position of the sound source is tracked and used to determine if the detected event is related to a moving vehicle and to establish the direction of movement....
-
The application of the Superpave method of climatic zones analysis in Poland with regard to bitumen performance grading
PublicationCurrently in Poland, similarly as in the other EU countries, road bitumens are tested and classified with regard to mainly the penetration value determined at the tempera-ture of 25C. It should be noted that this classification is not correlated with the cli-matic conditions in which the bitumens are to serve in the road pavement. Towards the end of the last century a new system of bitumen grading was developed and im-plemented...
-
Risk assessment methodologies for pedestrian crossings without traffic lights – Warsaw case study – pedestrian safety assessment
PublicationBased on data from 2015 [1], it was found that 31% of all fatalities in road accidents in Poland were pedestrians. In places accessible to pedestrian traffic 74.2% of total accidents involving pedestrians were recorded. Approximately 53.9% of accidents involving pedestrians take place in the proximity of pedestrian crossings. In the context of improving the safety of vulnerable road users, an assessment of the condition of infrastructure...
-
Tyre rolling resistance and its influence on fuel consumption
PublicationRolling resistance of tyres is one of the major resistive forces acting on any wheeled vehicle. Unfortunately, it is also one of the forces very difficult to measure. It is estimated that in certain traffic conditions (like for example constant speed driving with slow or moderate speed) so called Rolling Resistance Impact Factor may be as high as 0.3. This means that reduction of rolling resistance by 50% would lead to 15% of energy...
-
On the influence of the acceleration recording time on the calculation of impact severity indexes
PublicationThe paper concerns with the analysis of normative requirements pertaining to experimental setup of a crash test and its numerical modelling. An overview of parameters describing the collision of a vehicle with a road restraining system is presented. A short description of a concrete road safety barrier is presented. A brief description of numerical modelling procedures for crash tests is given as well. The parametric influence...
-
Planning of the green road system as an element of spatial management in suburbs and small towns
PublicationThe premise for the development of sustainable forms of road infrastructure in small towns is the appropriate plan at an early stage or modifi cation in the case of existing spaces. A multi-directional approach is extremely important, which takes into account the specifi city of the regional (country) road system, availability, and capacity of traffi c network, but also social and environmental factors. Effi cient management...
-
Modelling Signalised Intersections Reliability of Functioning
PublicationThe article addresses a fundamental aspect of traffic, i.e. the operation of traffic signals at intersections, in reference to the reliability theory. In many cases, when intersections carry substantial amounts of traffic, selecting control parameters to produce satisfactory traffic conditions is quite difficult. Design methods do not cover all possible situations which are the result of intersection geometry and location...
-
Preliminary safety assessment of Polish interchanges
PublicationInterchanges are a key and the most complex element of a road infrastructure. The safety and functionality of interchanges determine the traffic conditions and safety of the entire road network. This applies particularly to motorways and express-ways, for which they are the only way to access and exchange traffic. A big problem in Poland is the lack of comprehensive tools for designers at individual stages of the design process....
-
Decreasing CO2 Emissions By Reducing Tire Rolling Resistance
PublicationThe first motor vehicle was built by Nicolas Cugnot almost 250 years ago and since then there has been a continuous process of motor vehicles’ improvements, as well as development of new road pavements. The fuel crisis of the 70s of the 20th century made it clear to vehicle builders that measures should be taken to reduce vehicle fuel consumption and it contributed to an increased interest in electric vehicles. Although significant...
-
Fuzzy regresion approach to road safety analysis at regional level
PublicationRoad safety modelling on regional level of NUTS 2 in the EU is the complex issue and authors of this article indicate this in previous publications. NUTS 2 are basic regions for the application of regional policies (0.8-3 m inhabitants). During multivariate models development they discovered that it is difficult to make regression model well described all regions, even if they are from one country. In the first step Poisson model...
-
The influence of position of the post or its absence on the performance of the cable barrier system
PublicationRoad safety barriers are used to increase safety in potentially dangerous places on the roads. They are designed and installed on the roads to prevent any vehicle from getting outside the travelled way or from entering the opposite lane of the road. Barriers, which are used on European roads, have to undergo full scale crash tests according to the EN 1317 standards. Nowadays as a supplement to real crash tests, numerical simulations...
-
Application of Support Vector Machine for Determination of Impact of Traffic-Induced Vibrations on Buildings
PublicationThe aim of the article is to present an algorithm of Support Vector Machine created to forecast the impact of traffic-induced vibrations on residential buildings. The method is designed to classify the object into one of two classes. The classification into the first class means that there is no impact of vibrations on the building, while classification to the second class indicates the possible influence and suggests the execution...
-
The effect of tire aging on acoustic performance of CPX reference tires
PublicationReduction of tire/road noise is one of the biggest environmental challenges of road traffic. To reduce that noise it is necessary to perform acoustic measurements on the base of wellproven standard procedures. One method of measurements that is in common use, namely the Close Proximity Method (CPX), is described in standard ISO-DIS 11819-2. As this method is used to classify road surfaces regarding their influence on vehicle noise,...
-
Sound quality metrics applied to road noise evaluation
PublicationRoad noise monitoring systems typically measure sound levels in specific time periods. The more insightful approach suggests to measure also the nature of noise. Sound quality of sounds such as car noise can be objectively evaluated by several parameters. One of them is psychoacoustic annoyance, described by loudness, tone color, and the temporal structure of sound. In this paper the assessment of several sound quality parameters, such...
-
A Proposed Machine Learning Model for Forecasting Impact of Traffic-Induced Vibrations on Buildings
PublicationTraffic-induced vibrations may cause various damages to buildings located near the road, including cracking of plaster, cracks in load-bearing elements or even collapse of the whole structure. Measurements of vibrations of real buildings are costly and laborious. Therefore the aim of the research is to propose the original numerical algorithm which allows us to predict, with high probability, the nega-tive dynamic impact of traffic-induced...
-
Evaluation of Street Lighting Efficiency Using a Mobile Measurement System
PublicationThe issue concerns the initial stage of work on a method for performing a rapid assessment of the energy efficiency and illuminance of a street lighting installation. The proposed method is based on simultaneous measurement of illuminance from three lux meters placed on the roof of the vehicle. The data are acquired in road traffic, while the vehicle is driving. The proposed solution will allow in the future to quickly and reproducibly...
-
Automatic labeling of traffic sound recordings using autoencoder-derived features
PublicationAn approach to detection of events occurring in road traffic using autoencoders is presented. Extensions of existing algorithms of acoustic road events detection employing Mel Frequency Cepstral Coefficients combined with classifiers based on k nearest neighbors, Support Vector Machines, and random forests are used. In our research, the acoustic signal gathered from the microphone placed near the road is split into frames and converted...
-
Time-series analysis of road safety trends aggregated at national level in Europe for 2000-2010
PublicationThe reader will find in this study road safety modelling theory and time-series analysis techniques, applications to long period data of injury accidents and casualities, aggregared at national level
-
The multivariate multilevel analisis of different regional factors impact on road saferty in european country regions = Wielopoziomowa analiza wieloczynnikowa wpływu różnych charakterystyk regionalnych na poziom bezpieczeństwo ruchu w regionach krajów europejskich
PublicationIn this research, the effect of the European regional differences on the risk of been killed in road accident in these regions is investigated. Factors which differentiate regions can be described as automotive, economic, infrastructural, demographic, geographic. Analyzed risk, counted as regional fatality rate was modeled by the Poisson model. Because of regional diversity of Poisson distribution parameters, the Poisson distribution...
-
Wpływ barier ochronnych na poziom bezpieczeństwa ruchu drogowego
PublicationWypadki drogowe wciąż stanowią znaczną przyczynę zgonów, dlatego bardzo ważnym jest odpowiednie kształtowanie otoczenia drogi – by mogło ono uzyskać miano „wybaczającego”. Artykuł stanowi wprowadzenie do tematyki drogowych barier ochronnych, i jest częścią pracy dyplomowej realizowanej na Politechnice Gdańskiej, w ramach której autorzy analizują zależności pomiędzy wypadkami a omawianymi urządzeniami BRD. W artykule przedstawiono...
-
Assessment of the Speed Management Impact on Road Traffic Safety on the Sections of Motorways and Expressways Using Simulation Methods
PublicationMethods used to evaluate the impact of Intelligent Transport System (ITS) services on road safety are usually based on expert assessments or statistical studies. However, commonly used methods are challenging to apply in the planning process of ITS services. This paper presents the methodology of research using surrogate safety measures calculated and calibrated with the use of simulation techniques and a driving simulator. This...
-
Comparing traffic intensity estimates employing passive acoustic radar and microwave Doppler radar sensor
PublicationThe purpose of our applied research project is to develop an autonomous road sign with built-in radar devices of our design. In this paper, we show that it is possible to calibrate the acoustic vector sensor so that it can be used to measure traffic volume and count the vehicles involved in the traffic through the analysis of the noise emitted by them. Signals obtained from a Doppler radar are used as a reference source. Although...
-
ROSANNE Project: New Procedure for Noise Characterisation of Road Surfaces in Europe
PublicationROSANNE is a collaborative project in the 7th EU Framework Programme which aims at harmonising measurement methods for skid resistance, noise emission and rolling resistance of road pavements as a preparation for standardization. The project started in November 2013 and is developing and improving standards in the field of working group CEN/TC 227/WG 5. Regarding the influence of the pavement on the road traffic noise emission,...
-
INFLUENCE OF TEMPERATURE ON THE TYRE ROLLING RESISTANCE
PublicationTemperature is a very important factor controlling rolling resistance of road vehicle tyres. There are at least three different temperatures that may be considered as important factors controlling thermal conditions of the rolling tyre. The most common measure of the thermal conditions during tyre rolling is ambient air temperature. The other two are: pavement temperature and “tyre” temperature. Tyre temperature is the most difficult...
-
Degradation of reference tyres used for CPX measurements
PublicationMeasurements of tyre/road noise using the Close Proximity Method are based on reference tyres that are described in ISO/TS 11819-3. The standard specifies two tyres, namely "P1" and "H1" that should be used during measurements. To be used for measurements each tyre must fulfill certain conditions that are listed in the standard. The conditions are related to the tread pattern depth and rubber hardness. During experiments performed...
-
Road and roof runoff waters as a source of pollution in a big urban agglomeration (Gdańsk, Poland) = Wody spływne z arterii komunikacyjnych i dachów budynków jako źródło zanieczyszczenia w dużych aglomeracjach miejskich (Gdańsk, Polska)
PublicationWody spływne są bardzo ważnym medium, transportującym zanieczyszczenia atmosferyczne z powietrza do gleby i wody powierzchniowej. Przedstawiono wyniki dotyczące analizy próbek opadów atmosferycznych oraz wód spływnych z arterii komunikacyjnych i dachów budynków. Wykonano oznaczenia na zawartość anionów, kationów, metali ciężkich i pestycydów. Próbki były pobierane podczas wystąpienia opadu w różnych miejscach na terenie Gdańska....
-
Rolling Resistance And Tire/Road Noise on Rubberized Asphalt Pavement In Poland
PublicationThe paper presents results of tire/road noise and rolling resistance measurements performed on stone-matrix asphalt (SMA) that contains rubberized asphalt developed and produced by the company in Poland. Bituminous binder was modified with polymer and additive of crumb rubber. First observations of asphalt mixture with the new kind of modified bitumen used on the field section are presented. Rolling resistance of passenger car...
-
Consideration of dynamic loads in the determination of axle load spectra for pavement design
PublicationAxle load spectra constitute a crucial part of the data for pavement design and pavement distress analysis. Typically, axle load spectra represent static load from vehicles and do not include dynamic loads generated by vehicles in motion. While dynamic loads can significantly contribute to faster pavement distress, this fact is mostly omitted in pavement design methods. The paper presents a methodology for consideration of dynamic...
-
Optimisation and field assessment of poroelastic wearing course bond quality
PublicationCompared to typical asphalt mixtures, poroelastic mixtures are characterised by high porosity and high flexibility, which are desirable for traffic noise reduction. However, the same properties increase the risk of debonding from the lower layer, which is a significant source of premature damage. The study investigates which of the factors – tack coat agent, type and texture of the lower layer – have the greatest impact on interlayer...
-
Influence of aggregates angularity on the locking point of asphalt mixtures
Publication -
The role of tricalcium aluminate and gypsum dehydration level in cement for effective air entrainment of concrete
Publication -
Determination of Equivalent Axle Load Factors on the Basis of Fatigue Criteria for Flexible and Semi-Rigid Pavements
PublicationArtykuł przedstawia analizę współczynników równoważności obciążenia osi na podstawie kryteriów zmęczeniowych stosowanych w mechanistyczno-empirycznych metodach projektowania nawierzchni. Określono wzory służące do obliczania współczynnika w oparciu o szereg kryteriów zmęczeniowych. Podano wartości liczbowe współczynników.
-
Characterization of aggregate interlocking in hot mix asphalt by mechanistic performance tests
Publication -
Laboratory investigation of graphene modified asphalt efficacy to pavement performance
Publication -
Significance of cement-stabilised soil grain size distribution in determining the relationship between strength and resilient modulus
Publication -
Verification of the criteria for evaluation of water and frost resistance of asphalt concrete
PublicationThe paper presents the results of field investigation - condition survey of existing pavements and the results of laboratory tests on water and frost resistance of samples cored from the these pavements. The purpose of testing was to verify the criteria for evaluation of the resistance of asphalt concrete to the action of water and frost by way of comparing the results of field and laboratory tests, followed by evaluation of their...
-
Behaviour of asphalt concrete in cyclic and static compression creep test with and without lateral confinement
PublicationArtykuł przedstawia wpływ metodyki badań na określanie parametrów betonu asfaltowego. Wykazano, że badania pełzania bez skrępowania bocznego w większym stopniu uwypuklają wpływ asfaltu na parametry badanego betonu asfaltowego natomiast w badaniach ze skrępowaniem bocznym, zarówno rola asfaltu jak i szkieletu mineralnego jest uwzględniana przy ocenie parametrów betonu asfaltowego. Ponadto wykazano, że lepszymi miarami do oceny betonu...
-
Advanced fatigue and rutting characterisation of Polish asphalt mixtures based on the VECD model and viscoplastic shift model
PublicationThe advanced asphalt mixture performance-related specifications (AM-PRS) recently developed in USA can allow an optimisation of the design process of asphalt pavements thanks to the possibility to fully take into account the intrinsic material properties. In this study, four typical Polish mixtures, i.e. a Stone Mastic Asphalt (SMA) for wearing course, two mixtures for binder course with neat bitumen or Polymer modified Bitumen...
-
The effect of multiaxial geocomposite reinforcement on fatigue performance and crack propagation delay in double-layered asphalt beams
PublicationThe presented study investigates the effect of a recently developed multiaxial geocomposite made of polypropylene geogrid and non-woven fabric on the delay of crack propagation, based on four-point bending tests of large asphalt concrete beams – both for reinforced and non-reinforced specimens. Several approaches are described in this study, including analysis of stiffness modulus decrease and analysis of crack propagation using...
-
Human awareness versus Autonomous Vehicles view: comparison of reaction times during emergencies
PublicationHuman safety is one of the most critical factors when a new technology is introduced to the everyday use. It was no different in the case of Autonomous Vehicles (AV), designed to replace generally available Conventional Vehicles (CV) in the future. AV rules, from the start, focus on guaranteeing safety for passengers and other road users, and these assumptions usually work during normal traffic conditions. However, there is still...
-
Speed dependency of temperature effects on road traffic noise
PublicationRecently, a new literature review on the influence of temperature on tire/road noise became available, based on a compilation of large amounts of data from empirical research. This review showed that the effect of temperature is roughly double of that previously assumed and taken account of in international standards. This makes temperature one of the main sources of error in measurement results. Furthermore, it suggested that...
-
Analysing the impact of traffic incidents on express road traffic flow using FREEVAL
PublicationTraffic incidents occurring on motorways or express roads cause disruptions and deteriorate traffic conditions. The impact will differ depending on the type of incident, its duration and space blocked on the roadway and can be measured with e.g. average speed reduction, extension of travel time, time lost or overall costs of traffic disruptions. The aim of the paper is to analyse this impact, based on data from the Tri-City Ring...
-
DETERMINANTS OF INLAND NAVIGATION ON THE VISTULA FROM WARSAW TO GDAŃSK
PublicationWaterborne transport is the cheapest, the safest and the least harmful to the natural environment. Restoring regular waterway cargo transport will require revitalisation of the existing trans-shipment and logistics infrastructure for commercial inland ports and building new. Transport policy makers must remember that waterborne transport is the most ecological type of transport. It produces only 10% of the gases emitted to the...
-
An application of acoustic sensors for the monitoring of road traffic
PublicationAssessment of road traffic parameters for the developed intelligent speed limit setting decision system constitutes the subject addressed in the paper. Current traffic conditions providing vital data source for the calculation of the locally fitted speed limits are assessed employing an economical embedded platform placed at the roadside. The use of the developed platform employing a low-powered processing unit with a set of microphones,...
-
Application of BAN Network to Increase Security in Transport Systems
PublicationIn the article general characteristics of the BAN network with M2M communications are presented. These are networks that enable the implementation of wireless transmission of signals using special sensors located on the body or implanted subcutaneously. These sensors allow monitoring of different type life parameters of a human. In the next part of work there is proposed the implementation of BAN networks to transport systems as...
-
Providing Differentiated Levels of Service Availability in VANET Communications
PublicationInter-vehicle communications seems to be a promising remedy not only for a number of road-safety issues, but also to improve the efficiency of road traffic, as well as to support the on-board infotainment applications. However, it often encounters disruptions due to high mobility of vehicles causing frequent failures of communication links. In this paper, we utilize the idea of multipath vehicle-to-vehicle routing to provide protection...
-
Road traffic can be predicted by machine learning equally effectively as by complex microscopic model
PublicationSince high-quality real data acquired from selected road sections are not always available, a traffic control solution can use data from software traffic simulators working offline. The results show that in contrast to microscopic traffic simulation, the algorithms employing neural networks can work in real-time, so they can be used, among others, to determine the speed displayed on variable message road signs. This paper describes...
-
Numerical analysis of lumbar spine injury during road safety barrier collision
PublicationPurpose: Enhancing road safety is a critical goal worldwide, necessitating the development of clear standards for road safety systems. This study focuses on lumbar spine (L-spine) compression injuries during collisions with concrete road safety barriers (RSBs). It aims to analyze internal forces during impact to understand L-spine injury biomechanics in such accidents. Methods: The research included a literature review, analyzing...
-
The Role of Greenery and Traffic Calming Measures in Planning of Road Infrastracture
PublicationThe role of greenery and traffi c calming measures in road infrastructure planning. The “life” of a town is connected with its infrastructure. So it is that, apart from serving their principal function, motorways, roads, airports and other facilities which make transport possible largely determine contemporary urban design. To achieve balanced forms of urban infrastructure that ensure comfort, safety and spatial order, it is necessary when...
-
Survey on Applications of Multimedia Technology to Examine Impact of Roadside Advertising on Drivers
PublicationThe correct location of ads, both static and moving, in close proximity of the roadway is an issue of high significance in the context of road safety. This publication aims to provide support in solving these issues by presenting a range of options for the implementation of extensive, multi-faceted research, using modern technology to allow an objective assessment of the risks arising from the presence of advertising spots in the...