Wyniki wyszukiwania dla: narrow gauge rail
-
Frequency measurement research with weight averaging of pulse output signal of voltage-to-frequency converter
PublikacjaThe paper presents the essence and investigation of the efficiency of weight averaging of a pulse output signal of voltage-to-frequency converter. The effect of counting and the influence of interference on the result of weight averaging of frequency modulated pulses are analyzed. It is shown that from the point of view of counting error reduction, the best are polynomial weight functions. In the case of high interferences whose...
-
Adhesive Monitoring with Instrumented Wedge Test
PublikacjaThe wedge test (sometimes called the Boeing wedge test) is amongst the most readily exploitable techniques for assessment of the rate-dependent fracture energy of adhesive materials when used to bond relatively rigid substrates. With its siblings: the double cantilever beam (DCB), and the tapered double cantilever beam (TDCB), a force is applied, essentially in cleavage, to provoke substrate separation perpendicularly to the bondline...
-
Process zone in the Single Cantilever Beam under transverse loading. - Part II: Experimental
PublikacjaThis paper describes an experimental arrangement to evaluate stress/strain fields in the process zone of asymmetric adhesively bonded joints. A transparent polycarbonate flexible beam was bonded to an aluminium alloy rigid block with an epoxy adhesive in a Single Cantilever Beam (SCB) configuration. The flexible adherend was loaded in the direction parallel to the initial crack front at constant rate. To monitor strains induced...
-
3D Machine Vision System for Inspection of Contact Strips in Railway Vehicle Current Collectors
PublikacjaConstruction and technical condition of current collectors is crucial to reliability and safety of railway transportation. According to the Technical Specifications for Interoperability railway vehicles in the European Union should be equipped with carbon contact strips. Excessive wear or defects of contact strips degrade the capability of undisturbed power transmission, cause faster wear of contact wire, and can even result in...
-
Pyrolysis and Torrefaction—Thermal Treatment of Creosote-Impregnated Railroad Ties as a Method of Utilization
PublikacjaA fundamental issue of waste management and the rail transport industry is the problem of utilizing used railroad ties. Wooden railroad ties are treated with a preservative, usually creosote. Due to their high toxicity, railroad ties are considered hazardous waste and must be utilized under various directives. It is proposed to utilize the troublesome waste by using the pyrolysis and torrefaction process. The research proves that...
-
A Comprehensive Survey on Antennas On-Chip Based on Metamaterial, Metasurface, and Substrate Integrated Waveguide Principles for Millimeter-Waves and Terahertz Integrated Circuits and Systems
PublikacjaAntennas on-chip are a particular type of radiating elements valued for their small footprint. They are most commonly integrated in circuit boards to electromagnetically interface free space, which is necessary for wireless communications. Antennas on-chip radiate and receive electromagnetic (EM) energy as any conventional antennas, but what distinguishes them is their miniaturized size. This means they can be integrated inside...
-
Probabilistic Approach to Precipitation-Runoff Relation in a Mountain Catchment: A Case Study of the Kłodzka Valley in Poland
PublikacjaOn the basis of daily precipitation and discharges recorded in 1974–2013 relations between precipitation and runoff in the Kłodzka Valley (KV) in south-western Poland were analyzed. The degree of synchronicity between them was determined using the bivariate Archimedean copulas. This study aims at identifying and then describe in a probabilistic way the precipitation and runoff relations in the area playing an important role...
-
Instrumented end notched flexure - Crack propagation and process zonemonitoring Part II: Data reduction and experimental
PublikacjaA mode II instrumented end notched flexure three point bending (ENF) adhesion test is described. The adhesive joint consists of two aluminium alloy (AW7075-T6) plates bonded with a structural epoxy adhesive (Hysol EA 9395™). Strain gauges are attached to the outer surface (backface) of the substrates in the lengthwise direction to measure local surface strain during crack propagation. Simultaneously, load/displacement measurements...
-
Dynamic mass measurement in checkweighers using a discrete time-variant low-pass filter
PublikacjaConveyor belt type checkweighers are complex mechanical systems consisting of a weighing sensor (strain gauge load cell, electrodynamically compensated load cell), packages (of different shapes, made of different materials) and a transport system (motors, gears, rollers). Disturbances generated by the vibrating parts of such a system are reflected in the signal power spectra in a form of strong spectral peaks, located usually in...
-
Images of the Seabed of the Gulf of Gdansk Obtained by Means of the Parametric Sonar
PublikacjaThe main goal of this paper is to present results of the experimental investigation of the seabed by means of parametric echosounder in the form of chosen images. The phenomena of nonlinear interaction between two parallel beams of high intensity gives as a results very narrow beam of low frequency wave, that enables to penetrate the sea bottom. The first step of our investigations was calibration of all the elements of the measuring...
-
Detection of Objects Buried in the Sea Bottom with the Use of Parametric Echosounder
PublikacjaThe paper contains results of a in situ research main task of which was to detect objects buried, partially or completely, in the sea bottom. Object detecting technologies employing acoustic wave sources based on nonlinear interaction of elastic waves require application of parametric sound sources. Detection of objects buried in the sea bottom with the use of classic hydroacoustic devices such as the sidescan sonar or multibeam...
-
Loudness Scaling Test Based on Categorical Perception
PublikacjaThe main goal of this research study is focused on creating a method for loudness scaling based on categorical perception. Its main features, such as: way of testing, calibration procedure for securing reliable results, employing natural test stimuli, etc., are described in the paper and assessed against a procedure that uses 1/2-octave bands of noise (LGOB) for the loudness growth estimation. The Mann-Whitney U-test is employed...
-
Laser-Assisted Synthesis and Oxygen Generation of Nickel Nanoparticles
PublikacjaNowadays, more than ever, environmental awareness is being taken into account when it comes to the design of novel materials. Herein, the pathway to the creation of a colloid of spherical, almost purely metallic nickel nanoparticles (NPs) through pulsed laser ablation in ethanol is presented. A complex description of the colloid is provided through UV-vis spectroscopy and dynamic light scattering analysis, ensuring insight into...
-
Wybrane zagadnienia optymalizacji organizacji ruchu kolejowego w celu minimalizacji kosztów energii elektrycznej
PublikacjaW artykule przedstawiono podział kosztów w transporcie kolejowym z uwzględnieniem kosztów wewnętrznych przedsiębiorstwa, do których zaliczają się między innymi koszty dostępu do infrastruktury, czy koszty energii. Stwierdzono, że przy odpowiedniej organizacji ruchu pociągów na sieci kolejowej, bez ponoszenia dodatkowych nakładów na infrastrukturę i specjalistyczne urządzenia, można znacznie ograniczyć zużycie energii, a co za tym...
-
Ocena kształtu geometrycznego torów tramwajowych na podstawie pomiarów satelitarnych
PublikacjaW pracy przedstawiono ocenę możliwości wykorzystania dwusystemowych fazowych odbiorników GNSS (GPS/Glonass) dla realizacji pomiaru inwentaryzacyjnego linii tramwajowych. Opisano przebieg pomiarów przeprowadzonych na terenie Gdańska i uzyskane wyniki. Wykazano, że dla obszarów miejskich zastosowanie rozwiązań GNSS w oparciu o lokalną stację referencyjną może być alternatywnym podejściem względem pomiarów opartych o sieć ASG-EUPOS...
-
Multiaspect measurement analysis of breaking energy recovery
PublikacjaNowadays the issue of electric energy saving in public transport is becoming a key area of interest, which is connected both with a growth of environmental awareness in the society and an increase in the prices of fuel and electricity. That is why the reduction of energy consumption by increasing electrified urban transport, such as trams, trolleybuses, light rail and underground is becoming an increasingly important issue. Energy...
-
A PROPOSAL FOR ONE-IMAGE PHOTOGRAMMETRY SYSTEM FOR MEASURING THE CLEARANCE DISTANCE. CASE STUDY
PublikacjaMeasurement of the clearance distance (both in the context of the rail and road) is one of the current and increasingly discussed topics in the context of photogrammetric and image processing (computer vision) methods. The article presents a description of a simple and rapid method of measure the clearance distance between the obstacles by using one-image photogrammetry. The proposed method was tested for the railway, tram and...
-
The influence of the place of residence on the behavior and transport preferences of the inhabitants of the agglomeration
PublikacjaTransport behaviors and preferences have an impact on modal split, which is why they should form the basis for shaping the public transport offer. Achieving the goals of sustainable mobility requires taking into account differences in transport behavior and preferences characterizing residents from different areas of the agglomeration. Analyzing differences in behaviors and preferences, the possibilities and limitations resulting...
-
Reducing the Uncertainty of the Moving Object Location Measurement with the Method of Quasi-Multiple Measurement in GNSS Technology in Symmetrical Arrangement
PublikacjaThe article presents a solution to the problem of limited accuracy of dynamic measurements performed with GNSS receivers. The proposed measurement method is a response to the needs related to the assessment of the measurement uncertainty of the position of the track axis of the rail transport line. However, the problem of reducing the measurement uncertainty is universal for many different situations where high accuracy of positioning...
-
DESTINATE „Narzędzia wspierające podejmowanie decyzji we wdrażaniu efektywnych kosztowo środków ograniczania hałasu kolejowego”
ProjektyProjekt realizowany w Politechnika Poznańska zgodnie z porozumieniem 730829 z dnia 2016-11-01
-
Application of commercial microwave links (CMLs) attenuation for quantitative estimation of precipitation
PublikacjaPrecipitation estimation models are typically sourced by rain gauges, weather radars and satellite observations. A relatively new technique of precipitation estimation relies on the network of Commercial Microwave Links (CMLs) employed for cellular communication networks: the rain-inducted attenuation in the links enables the precipitation estimation. In the paper, it is analysed to what extent the precipitation derived from CML...
-
Cooperation of mono- and bi-articular muscles: human lower limb
PublikacjaObjectives: The aim of this study was to create and analyze a Pareto-optimal problem that would describe cooperation between mono- and bi-articulate lower limb muscles in sagittal plane. Methods: Equations describing the problem were derived and analyzed, additional constrains were introduced and experimental verification based on gait video analysis was performed. Results: Uncertainty of Pareto-optimal solution is shown for the...
-
Designing efficient A-D-A1-D-A type fullerene free acceptor molecules with enhanced power conversion efficiency for solar cell applications
PublikacjaThe achievement of highly efficient power conversion efficiency (PCE) is a big concern for non-fullerene organic solar cells (NF-OSCs) because PCE can depend on numerous variables. Here, new five novel acceptor molecules without fullerenes were developed and investigated using DFT (density functional theory) and TD-DFT (time dependent-density functional theory). Compared to the recently synthesized molecule (PZ-dIDTC6), the developed...
-
Determination of Moisture Content Profiles of Spruce Wood After High Temperature Process and Air Drying
PublikacjaThe results of moisture content of wood after the process of its drying under high temperature conditions and air drying are presented. Wood samples, namely spruce (Picea abies Karst.) from the northern part of Pomerania region in Poland, were subject of steam and air drying.The aim of experiments was to measure moisture content of wood in its cross sections using moisture meter WRD-100. The samples of thickness 70 mm and length...
-
Two kinds of oxygen vacancies in lithium titaniate doped with copper as detected by EPR
PublikacjaLithium titanate (Li1+xTi2-xO4) doped with Cu2+ ions was synthesized by sol-gel processing method. The structure and morphology are characterized by X-ray Diffraction (XRD), X-ray Photoemission Spectroscopy (XPS), Scanning Electron Microscopy (SEM) and Electron Paramagnetic Resonance (EPR). Spin Hamiltonian parameters describing Zeeman and hyperfine interaction for 63Cu2+ ions were obtained from EPR spectra simulations. The spectra...
-
Study of probe signal bandwidth influence on estimation of coherence bandwidth for underwater acoustic communication channel
PublikacjaA signal transmitted in a shallow Underwater Acoustic Communication (UAC) channel suffers from time dispersion due to the multipath propagation and the refraction phenomena. This causes intersymbol interference of the received signal and frequency-selective fading observed in its spectrum. Coherence bandwidth is one of the key transmission parameters used for designing the physical layer of a data transmission system to minimise...
-
NOWE ŻYCIE DWORCÓW KOLEJOWYCH - MOŻLIWOŚCI MODERNIZACJI OBIEKTÓW OBSŁUGI PASAŻERÓW
PublikacjaW aspekcie współcześnie zachodzących zmian demograficznych, rozwijających się technologii oraz poszukiwania rozwiązań proekologicznych wzrasta potencjał transportu kolejowego. Po okresie upadku znaczenia kolei jesteśmy świadkami jej postępującej transformacji w Europie. Do obsługi ruchu pasażerskiego służy w Polsce prawie 600 dworców kolejowych, z których większość nie jest jeszcze przystosowana do aktualnych potrzeb użytkownika...
-
How can HSR promote inter-city collaborative innovation across regional borders?
PublikacjaMany studies have shown that high-speed rail (HSR) can reshape the spatial pattern of economic geography. However, there needs to be more logical argumentation and rigorous empirical design on the paths and mechanisms involved. This paper considers the impact of the border effect on HSR links and innovation clusters from the perspective of inter-regional collaborative innovation. It provides a logical and compact theoretical...
-
Risk assessment for tram traffic on tramway bridges
PublikacjaMiejski transport szynowy wielu miastach stanowi istotny element systemu transportowego i jest przestrzennie rozwijającym się systemem zapewniającym mieszkańcom codzienną obsługę transportową. Bezpieczeństwo pasażerów transportu szynowego i użytkowników dróg jest jednym z najważniejszych czynników, który należy uwzględnić w trakcie projektowania infrastruktury oraz w ocenie operacyjnej systemu miejskiego transportu tramwajowego....
-
P92 steel and inconel 617 alloy welds joint produced using ERNiCr-3 filler with GTAW process: Solidification mechanism, microstructure, mechanical properties and residual stresses
PublikacjaThe objective of the current study was to analyse the microstructure, mechanical characteristics, and residual stresses of a dissimilar welded joint (DWJ) made of P92 steel and the Inconel alloy 617 (IN617) using the gas tungsten arc welding (GTAW) method. The ERNiCr-3 filler was selected to produce the conventional V groove (VG) and narrow V groove (NVG) butt joint. The filler deficient zones in the weldments, such as the filler...
-
Agnieszka Ubowska dr hab. inż.
OsobyDr hab. inż. Agnieszka Ubowska, prof. ZUT urodziła się w 1978 r. w Pile, gdzie ukończyła Technikum Ochrony Środowiska. W latach 1998-2003 studiowała na Wydziale Technologii i Inżynierii Chemicznej Politechniki Szczecińskiej na kierunku ochrona środowiska. Stopień doktora nauk technicznych uzyskała w 2008 r., broniąc na Wydziale Technologii i Inżynierii Chemicznej Politechniki Szczecińskiej pracę pt. „Hybrydowe hydrofilowe (ko)polimery...
-
Distribution of relaxation times as a method of separation and identification of complex processes measured by impedance spectroscopy
PublikacjaImpedance spectroscopy is one of the most commonly performed measurements to characterize electronic and electrochemical systems. Impedance spectra have limited resolution and many different processes may overlap what could be the reason of obstructions in its proper later analysis. Up to date, there are three approaches to solve this problem: examining impedance spectra itself, fitting spectra with equivalent circuits, and calculating...
-
Impact of Galileo Observations on the Position and Ambiguities Estimation of GNSS Reference Stations
PublikacjaDevelopment of Galileo navigation system has caused that it is increasingly used in various areas. One of the most important of them is precise positioning of the reference networks. In this paper we present the impact of Galileo observations on the differential precise positioning as well as ambiguities resolution of selected GNSS stations. We tested five different solutions: GPS-only, Galileo-only, GPS/Galileo, GPS/GLONASS and...
-
Numeryczna analiza dynamiczna wieszaków w łukowym wiadukcie kolejowym. Analiza przypadku
PublikacjaW artykule przedstawiono analizę dynamiczną wiaduktu kolejowego w ciągu Centralnej Magistrali Kolejowej zlokalizowanego koło Huty Zawadzkiej. W analizie zwrócono szczególną uwagę na lokalną odpowiedź wieszaków na obciążenie przejeżdżającym pociągiem oraz wiatrem. Obliczenia przeprowadzono na podstawie wykonanego modelu MES. Zweryfikowano poprawność modelu poprzez porównanie uzyskanych wyników z wartościami pomierzonymi. Przeprowadzono...
-
Badania nośności na zginanie innowacyjnego kształtownika giętego na zimno typu GEB
PublikacjaLekkie konstrukcje metalowe wytwarzane z kształtowników giętych na zimno to jedna z najszybciej rozwijających się dyscyplin w zakresie budownictwa. Do niedawna profile gięte na zimno stosowano wyłącznie jako elementy drugorzędne, czyli płatwie oraz rygle. Nowo opatentowany przekrój typu GEB ma być wykorzystywany jako element nośny konstrukcji ramowych. Jednak jego zaistnienie na rynku budowlanych konstrukcji metalowych jest uwarunkowane...
-
Sea ice floe size and shape data from a very high resolution satellite image (Knox Coast, East Antarctica)
Dane BadawczeThis dataset contains floe size distribution data from a very high resolution (pixel size: 0.3 m) optical satellite image of sea ice, acquired on 16. Feb. 2019 off the Knox Coast (East Antarctica). The image shows relatively small ice floes produced by wave-induced breakup of landfast ice between the Mill Island and Bowman Island. The ice floes are...
-
Application of the Heavy-Atom Effect for (Sub)microsecond Thermally Activated Delayed Fluorescence and an All-Organic Light-Emitting Device with Low-Efficiency Roll-off
PublikacjaThefeatureof abundantandenvironmentallyfriendlyheavyatoms(HAs)like bromineto acceleratespin-forbiddentransitionsin organicmoleculeshas beenknownforyears.In combinationwiththe easinessof incorporation,brominederivativesof organicemittersshowingthermallyactivateddelayedfluorescence(TADF)emergeas a cheapand efficientsolutionforthe slowreverseintersystemcrossing(rISC)problemin suchemittersand strongefficiencyroll-offof all-organiclight-emittingdiodes(OLEDs).Here,we...
-
Economical wood sawing with circular saw blades
PublikacjaMaterial- and energy-saving belong to the basic requirements which are imposed on the contemporary manufacturing processes. Since realization of those processes gives measurable profits not only economical but also ecological. In case of wood sawing with circular saw blades material- and energy-savings are dependent on total overall set of teeth (theoretical kerf) and teeth position accuracy in relation to the workpiece. Hence,...
-
Reduction of noise and rolling resistance by horizontal grinding of asphalt pavements
PublikacjaGrinding of cement concrete pavements to reduce unevenness and noise is common since a long time. Grinding is then made with wheels equipped with diamond blades rotating in the vertical plane. This creates narrow vertical/longitudinal grooves in the pavement. It is not applied to asphalt pavements. In this paper an alternative type of grinding is studied. In this case plates with diamond heads rotate in the same plane as the pavement,...
-
Integrated Sectors - Diversified Earnings: The (Missing) Impact of Offshoring on Wages and Wage Convergence in the EU27
PublikacjaThis paper assesses the impact of international outsourcing/offshoring practices on the process of wage equalization across manufacturing sectors in a sample of EU27 economies (1995-2009). We discriminate between heterogeneous wage effects on different skill categories of workers (low, medium and high skill). The main focus is on the labour market outcomes of vertical integration, so we augment a model of conditional wage convergence...
-
Integrated sectors - diversified earnings: the (mising) impact of offshoring on wages and wage convergence in the EU27
PublikacjaThis paper assesses the impact of international outsourcing/offshoring practices on the process of wage equalization across manufacturing sectors in a sample of EU27 economies (1995–2009). We discriminate between heterogeneous wage effects on different skill categories of workers (low, medium and high skill). The main focus is on the labour market outcomes of vertical integration, so we augment a model of conditional wage convergence through...
-
Highly Visible-Light-Photoactive Heterojunction Based on TiO2 Nanotubes Decorated by Pt Nanoparticles and Bi2S3 Quantum Dots
PublikacjaA heterojunction with excellent visible light response and stability based on titanium dioxide nanotubes (TiO2 NTs), bismuth sulfide quantum dots (Bi2S3 QDs), and platinum nanoparticles (Pt NPs) is proposed. Both Pt NPs (3.0 ± 0.2 nm) and Bi2S3 QDs (3.50 ± 0.20 nm) are well distributed on the (i) top parts, (ii) inner walls, and (iii) outer walls of the TiO2 NTs. Visible-light-induced photoreaction was initialized by excitation...
-
On the Consumption of Multimedia Content Using Mobile Devices: a Year to Year User Case Study
PublikacjaIn the early days, consumption of multimedia content related with audio signals was only possible in a stationary manner. The music player was located at home, with a necessary physical drive. An alternative way for an individual was to attend a live performance at a concert hall or host a private concert at home. To sum up, audio-visual effects were only reserved for a narrow group of recipients. Today, thanks to portable players,...
-
DOP and Pseudorange Error Estimation in Mobile GNSS Systems for Android OS Applications
PublikacjaIn the near past, GNSS (Global Navigation Satellite Systems) were only offered for a narrow group of recipients. Nowadays, thanks to mobile devices, they are available to anyone and everywhere. Personal navigation, searching for POI (Point of Interest), etc., had become a basic essential activity. Thanks to the widespread and availability of smartphones each user can obtain information considering his or her location even in an...
-
DOP and Pseudorange Error Estimation in Urban Environments for Mobile Android GNSS Applications
PublikacjaJust a couple of years ago, GNSS (Global Navigation Satellite Systems) were available only for a narrow group of users. Currently, with the outbreak of mobile devices, they are accessible to anyone and everywhere. Urban navigation or searching for POIs (Points of Interest) had become an everyday activity. With the availability of consumer electronics and wireless technologies, each user can obtain information considering his or...
-
Nondestructive global corrosion measurement using guided wavefield data
PublikacjaMetallic structures often face degradation, and corrosion ranks among the most prevalent forms of deterioration. Accurate quantification of corrosion is crucial, especially for structures exposed to harsh environmental conditions, such as marine vessels and offshore installations. Because the traditional measurement methods based on scanning by ultrasonic gauge are time-consuming and provide only rough information on the thickness...
-
Modes of Failure Analysis in Reinforced Concrete Beam Using Laser Scanning and Synchro-Photogrammetry
PublikacjaThe following paper reveal the limitations and possibilities of terrestrial laser scanning technology adaptation in diagnostics of reinforced concrete beams. In this paper, authors present potential spectrum of TLS use in modes of failure analysis of R-C beams and determines under which conditions the laser technologies might be applied. Research was carried out at the Regional Laboratory of Structural Engineering at Gdansk University...
-
Modes of Failure Analysis in Reinforced Concrete Beam Using Laser Scanning and Synchro-Photogrammetry - How to apply optical technologies in the diagnosis of reinforced concrete elements?
PublikacjaThe following paper reveal the limitations and possibilities of terrestrial laser scanning technology adaptation in diagnostics of reinforced concrete beams. In this paper, authors present potential spectrum of TLS use in modes of failure analysis of R-C beams and determines under which conditions the laser technologies might be applied. Research was carried out at the Regional Laboratory of Structural Engineering at Gdansk University...
-
Algorithm for Automatic Wear Estimation of Railway Contact Strips Based on 3D Scanning Results
PublikacjaElectric rail vehicles use current collection system which consists of overhead contact line and a current collector (pantograph) mounted on the roof of a vehicle. A pantograph is equipped with contact strips, which slide along the contact wire, ensuring steady electric contact. Contact strips are made of carbon layer, fixed to an aluminum carrier. The carbon layer wears down due to friction. Using overly worn contact strips increases...
-
Analiza ruchowa pojazdów szynowych z uwzględnieniem zmian napięcia na odbieraku prądu
PublikacjaW artykule zaproponowano metodykę wykonywania analizy ruchowej pojazdów szynowych, która uwzględnia wpływ zmieniającego się napięcia zasilającego pojazd a jego właściwości ruchowe. Wykorzystując model opracowany w programie Simulink wskazano na istotne różnice w czasie przejazdu oraz w wartościach napięcia zasilającego pomiędzy proponowanym sposobem analizy a powszechnie stosowanym podejściem uproszczonym.