Wyszukiwarka
Wyniki wyszukiwania dla: road design
-
The use of lightweight aggregate saturated with PCM as a temperature stabilizing material for road surfaces.
PublikacjaThis paper presents the possibility of adding lightweight building aggregates to increase the stability – mechanical as well as thermal - of constructions and road objects. This stability can be achieved through saturating the porous granules of aggregate with a phase-change material (PCM) that allows the accumulation of solar heat. Intense solar radiation, especially during the summer, can cause the asphalt on road surfaces, bridges...
-
Down-Sampling of Large LiDAR Dataset in the Context of Off-Road Objects Extraction
PublikacjaNowadays, LiDAR (Light Detection and Ranging) is used in many fields, such as transportation. Thanks to the recent technological improvements, the current generation of LiDAR mapping instruments available on the market allows to acquire up to millions of three-dimensional (3D) points per second. On the one hand, such improvements allowed the development of LiDAR-based systems with increased productivity, enabling the quick acquisition...
-
Evaluation and application of data from road weather stations for winter maintenance management
PublikacjaThe paper presents the analysis of road weather data from meteorological stations located at the Polish national roads of Pomerania District during the impact of winter conditions. Presented issue is particularly important from the point of view the problem of winter maintenance and especially for prediction and assurance of quality of asphalt pavement surface ie. resistance to low temperature cracking or risk of glazed frost....
-
Safety Assessment of the Regional Warmia and Mazury Road Network Using Time-Series Analysis
PublikacjaWarmia and Mazury still belongs to the areas with the smallest transport accessibility in Europe. Unsatisfactory state of road infrastructure is a major barrier to the development of the regional economy, impacting negatively on the life conditions of the population. Also in terms of road safety Warmia and Mazury is one of the most endangered regions in Poland. The Police statistics show that beside a high pedestrian risk observed...
-
Comparison of requirements for location, maintenance and removal of road advertising between polish and foreign regulations
PublikacjaThe article gives an overview of Polish and international formal and legal requirements for roadside advertising and the relevant road safety impacts. The analysis focussed on outdoor advertising life cycle consisting of three stages: location, operation and removal of advertising. Experience of road authorities from Australia (Queensland), Republic of South Africa and the United Kingdom was collected. The article is part of a...
-
Karol Grębowski dr inż.
OsobyKarol Grębowski (dr inż.) pracuje jako adiunkt w Katedrze Technicznych Podstaw Projektowania Architektonicznego na Wydziale Architektury Politechniki Gdańskiej. Jego badania naukowe dotyczą zjawisk szybkozmiennych zachodzących podczas drgań konstrukcji budowlanych, obiektów mostowych (trzęsienia ziemi) oraz badania w zakresie metodologii projektowania budynków stanowiących system ochrony pasywnej (SOP) odpornych na uderzenia pojazdów...
-
IDENTIFICATION AND COMPARATIVE ANALYSIS OF FACTORS INFLUENCING ROAD SAFETY IN US REGIONS AND IN POLISH VOIVODESHIPS
PublikacjaAnalyses of road safety at national level have been run for many years and large number of publications concerning them appeared so far. How interdisciplinary the issue is, has been shown by literature studies done by the author of the paper. It appears that economists, mathematicians, doctors as well as engineers have studied the issue. It is not an easy one, as results of many analyses lead to conflicting conclusions and...
-
Essays on China's international trade - focus on One-Belt One-Road initiative
PublikacjaThis thesis explores China's international trade from trade, global value chains (GVCs) and export diversity, focusing on the "One-Belt One-Road" (OBOR) initiative proposed at the end of 2013. Specifically, I verify the potential association of OBOR with bilateral imports and exports in the first chapter. Then the relationship between OBOR and GVCs has been explored in Chapter 2. And I have extended the research in GVCs to China's...
-
An in-depth look at the tire rubber hardness influence on tire/road noise measurements
PublikacjaWhen assessing the acoustic quality of a road pavement with the close-proximity (CPX) or the on-board sound intensity (OBSI) method, the rubber hardness of the reference tire substantially affects the measurement. Practical experience shows that measurement tires can get significantly harder within a single measurement season. This is why one would like to normalize measurements to a reference rubber hardness. The recently published...
-
Tyre/road noise measurements on ISO tracks using the modified CPX method
PublikacjaTyre rolling noise test method specified in the UNECE Regulation 117 is directly used in the Tyre Labelling Directive. Noise level specified on EU Tyre Label of each new tyre available on the European market was determined based on vehicle coast-by noise measurements performed on the standard reference road surface proscribed in the ISO 10844:2014. Available data from investigations by the vehicle and tyre industry and results...
-
Biomechanics of Lumbar Spine Injury in Road Barrier Collision–Finite Element Study
PublikacjaLiterature and field data from CIREN database have shown that lumbar spine injuries occur during car crashes. There are multiple hypotheses regarding how they occur; however, there is no biomechanical explanation for these injuries during collisions with road safety barriers (RSBs). Therefore, the objective of this study was to investigate the mechanics of vertebral fractures during car collisions with concrete RSBs. The finite...
-
Design of poroelastic wearing course with the use of direct shear test
PublikacjaPoroelastic Road Surfaces (PERS) are characterized by porous structure with at least 20% of air void content and stiffness almost 10 times lower than typical asphalt course. Such properties enable noise reduction up to 12 dB in comparison to SMA 11 mixture. However, the main disadvantage of previously used poroelastic mixtures, based on resin type binders, was their low durability, which resulted in raveling and delamination from...
-
Low-cost 3D Printed Circularly Polarized Lens Antenna for 5.9 GHz V2X Applications
PublikacjaThis paper presents design and realization of a circularly polarized antenna consisting of a linearly polarized patch antenna and a 3D printed lens, at the same time performing the functions of wave collimator and a polarizer. The antenna is dedicated for 802.11p systems, as a part of road infrastructure, with operation bandwidth 5.85 - 5.925 GHz. Its realised gain and axial ratio at center frequency 5.9 GHz are 14.3 dBi and 2.17...
-
Laboratory Investigations of Frost Susceptibility of Aggregates Applied to Road Base Courses
Publikacja -
GAMBIT's position within the European Union's III Road Safety Plan
PublikacjaOtwarcie Seminarium GAMBIT 2006, poświęcone wnioskom z dotychczasowych działań oraz planom na przyszłość, zawartym w najnowszym Krajowym Programie GAMBIT 2005. Prace nad nim rozpoczęto w sierpniu 2004, czyli tuż po wejściu Polski do Unii Europejskiej. W kwietniu 2005 Rada Ministrów przyjęła GAMBIT 2005 jako program dla Polski na lata 2005-2013, skonstruowany zgodnie z metodyką opracowaną dla tych krajów UE-25, których poziom zagrożenia...
-
Investigation of the road noise source employing an automatic noise monitoring station
PublikacjaThe paper presents a pilot investigation of noise source models in two selected localizations in the context of future dynamic noise map creation. The experiments were carried out using the automatic noise monitoring station engineered at the Multimedia Systems Departmentof the Gda´nsk University of Technology. The results of the noise measurements employing monitoring stations and its comparison to the reference values are depicted....
-
Certification of vehicles used for tire/road noise evaluation by CPX method
PublikacjaJednym ze sposobów oceny hałasu opon i nawierzchni drogowych jest metda CPX polegająca na pomiarze hałasu w polu bliskim miejsca współpracy opony z nawierzchnią. Aby uzyskać wysoką dokładność pomiarów niezbędne jest ustanowienie procedur ustanowienie procedur certyfikacyjnych sprzętu pomiarowego a więc głównie pojazdu badawczego. Praca dotyczy procedur certyfikacyjnych wypracowanych przez Grupę Roboczą WG33 ISO/TC43/SC1 oraz w...
-
The Sustainable Development and Economic Impact of China’s Belt and Road Initiative in Ethiopia
Publikacja -
Tire/road noise measuring principles according to the Close Proximity Method
PublikacjaW pracy podano metody badania hałasu opon samochodowych. Omówiono przyczepy pomiarowe zbudowane w Politechnice Gdańskiej oraz systemy pomiarowe stosowane do pomiaru hałasu opon zgodnie z metodą CPX.
-
Influence of 8-Hour Road Transportation on Selected Physiological Parameters in Horses
Publikacja -
The Comparison of the Emissions from Light Duty Vehicle in On-road and NEDC Tests
Publikacja -
The New Silk Road: Seeking Opportunities for Polish Exports in the Chinese Market
Publikacja -
Influence of the mobility package on the functioning of the Polish road transport of goods sector
Publikacja -
Site environment type – The main factor of urban road dust toxicity?
Publikacja -
The Impact of COVID-19 on Road Freight Transport Evidence from Poland
Publikacja -
Analysis of soundscape recordings in close proximity to the road in changeable wather conditions
PublikacjaThe acoustic vehicle sensing is the least invasive type of traffic detection. Also, acoustic-based vehicle detection technology is insensitive to precipitation and can operate in low light level. Therefore, this kind of method may be used for automatic detection of the vehicle passage events. It can also be employed for measurements of a vehicle speed and the vehicle assignment to the particular category. In this paper the results...
-
Mn Road Facility Badania nawierzchni drogowych w amerykańskim stylu
PublikacjaPomimo znacznego rozwoju technik modelowania matematycznego oraz badań laboratoryjnych nie jest obecnie możliwe wyeliminowanie badań nawierzchni drogowych i ich monitorowania w warunkach drogowych. W pracy przedstawiono drogowe badania oporu toczenia opon samochodowych na torach doświadczalnych Francji i Stanów Zjednoczonych wykonane za pomocą przryczepy dynamometrycznej zbudowanej w Politechnice Gdańskiej. Podano przykładowe wyniki...
-
Road Safety Observatories within the Structure of Integrated Transport Safety Systems
PublikacjaAccurate knowledge about the causes, circumstances and place of transport accidents is the prerequisite to take the correct action to improve transport safety. Developing appropriate organizational structures, forms and methods of management and implementation of safety measures in the sectoral approach condition the success. Therefore the Safety Information System is one of the integral areas of the Integrated Transport Safety...
-
The impact of road network structure and mobility on the national traffic fatality rate
PublikacjaW pracy określono wpływ wybranych miar struktury sieci drogowej i mobilności mieszkańców na wskaźnik śmiertelności w wypadkach drogowych na bazie dostępnych danych z wielu krajów świata. Opracowano wieloczynnikowe modele nieliniowe pozwalające na określenie wpływu wielu istotnych czynników: ekonomicznych, systemowych, motoryzacyjnych i infrastrukturalnych na bezpieczeństwo ruchu drogowego mierzonego wskaźnikiem śmiertelności RFR.
-
Introduction to smart solutions for wastewater: Road-mapping the transition to circular economy
PublikacjaToday there is an urgent need to move from a linear to a circular economy approach with special focus to water and environment. Despite the paramount importance, this transition is hampered by barriers which concern not only technological but embrace also organizational, regulatory, social, and economic aspects. In order to overcome such barriers, innovative water-smart solutions are needed and a robust roadmap for the transition...
-
From hobbies, straightforward analysis to serious research – the road to phd degree
PublikacjaThe illustration of the main articles goal is an example of author's academic career course, the aim of which is to obtain a doctoral degree in the field of geodesy and cartography. Today, the most important thing for the young scientist is the devotion to research in certain field of science, which is interested for the large community of scientists. From a psychological point of view, a unity of interest and experiments must...
-
Times Series Analysis Of Road Safety Trends At The Regional Level In Poland
PublikacjaThe paper presents possibility of applying a structural times series modeling with explanatory and intervention variables as a tool capable for explaining the changes in the monthly number of fatalities and seriously injured in traffic accidents. The analysis covers regional level and takes into consideration traffic accidents data of two regions: Pomorskie and Warmia-Mazury. In addition short-term forecasts for the two regions...
-
The Impact of Road Network Structure and Mobility on the National Traffic Fatality Rate
Publikacja -
Road traffic can be predicted by machine learning equally effectively as by complex microscopic model
PublikacjaSince high-quality real data acquired from selected road sections are not always available, a traffic control solution can use data from software traffic simulators working offline. The results show that in contrast to microscopic traffic simulation, the algorithms employing neural networks can work in real-time, so they can be used, among others, to determine the speed displayed on variable message road signs. This paper describes...
-
Characteristics of volatile organic compounds emission profiles from hot road bitumens
PublikacjaA procedure for the investigation and comparison of volatile organic compounds (VOCs) emission profiles to the atmosphere from road bitumens with various degrees of oxidation is proposed. The procedure makes use of headspace analysis and gas chromatography with universal as well as selective detection, including gas chromatography–mass spectrometry (GC–MS). The studies revealed that so-called vacuum residue, which is the main component...
-
LS-DYNA simulations of the impacts of a 38-ton Heavy Goods Vehicle into a road cable barrier
PublikacjaNowadays, more and more attention is being paid to safety on roads and motorways. It is due to the continuous development of road and motorway network and a significant increase of the number of vehicles on roads. To meet the expectations of improving road safety in Poland, the Road Innovations Development (RID) research programme was implemented in 2016. The aim of the RID 3A - Road Safety Equipment (RoSE) project is a comprehensive...
-
Contribution of dynamic vehicle loads to pavement failure
PublikacjaPavement surfaces are not ideally even, which causes dynamic loads of vehicle axles. Distribution of dynamic loads of a given axle is similar to normal distribution and can be described by static load and dynamic load coefficient. The dynamic load coefficient depends on road profile, vehicle speed, properties of suspensions and static load of axle. While for a given road section road profile remains constant, vehicle speed and...
-
Case study 1.2C: Road infrastructure cost in Poland, Annex to Deliverable D3, Marginal cost case studies for road and rail transport. GRACE. Funded by Sixth Framework Programme.
Publikacja -
Pawel Polaczyk dr inż.
OsobyDr. Pawel Polaczyk is a scholar in civil engineering and a civil engineering practitioner in pavement engineering. Dr. Polaczyk is originally from Warsaw, Poland, where he received his B.Sc. degree in Civil Engineering with a concentration in Transportation from Warsaw University of Technology. His Master`s and Doctorate degrees in Civil Engineering with a concentration in Geotechnology and Materials Engineering are from the University...
-
The Application of Granulated Expanded Glass Aggregate with Cement Grout as an Alternative Solution for Sub-Grade and Frost-Protection Sub-Base Layer in Road Construction
PublikacjaThe purpose of the research was to assess the possibility of using granulated expanded glass aggregate (GEGA) with cement grout as a replacement of a sub-grade and frost-protection layer, made of natural fine aggregates (NATU), stabilized with a hydraulic binder. Instead of traditional parts of the road construction, such as the sub-grade and frost-protection layer with the application of fine aggregate, stabilized with cement,...
-
Numerical simulation of the influence of the selected factors on the performance of a concrete road barrier H2/W5/B
PublikacjaThis paper discuss the influence of selected factors on the performance of a concrete road barrier H2/W5/B. Modelling techniques of a concrete road safety system were briefly discussed. Comparison to the full scale crash test results has been shown. The concrete road safety barrier has been investigated for evaluation of the overall damage after collision under various initial conditions. The failure assessment criterion has been...
-
Methodology of research on the impact of ramp metering on the safety and efficiency of road traffic using transport models
PublikacjaThe methods currently used to assess the impact of Intelligent Transport Systems (ITS) services on traffic safety and efficiency are mainly based on expert assessments, statistical studies or traffic models that need further development. There is no structured, uniform evaluation method to compare the impact of different ITS services and their different configurations. The impact of ITS deployment on the road network adjacent to...
-
Proposed method for estimating the costs of safety barrier life cycle
PublikacjaToday barrier types are frequently selected for their price with little regard for the total costs the structure will incur over its lifetime. One of the basic tools designed to manage road infrastructure is the life cycle cost method (LCC, Life cycle cost). It sums up the costs to plan, design, build, operate (use and maintain) and decommission a road structure. Having developed dynamically at the turn of the century the method...
-
Relieving the Measuring System of the Trailer for Tyre/Road Rolling Resistance Measurements from the Inertia Force
PublikacjaIn the article the principle of measuring of tyre/road rolling resistance tyres in road conditions applied in a special measuring trailer is presented. This trailer was built in Faculty of Mechanical Engineering at Gdansk University of Technology. The construction of two special devices used in this trailer was discussed. These devices eliminate the influence of some chosen confounding measurements factors such as: the inertia...
-
Laboratory Determination of Burger's Model Parameters for Visco-elastic Analysis of Road Pavement Materials
PublikacjaBurger's Model is one of those models that describes performance of asphalt mixtures. Its parameters can be used in road construction analysis based on visco-elastic properties in wide variety of temperatures using dedicated programs (e.g. Veroad) or in Finite Element Method (FEM). Parameters of Burger's Model can be used for example in prediction of low temperature cracking in low winter temperatures or permanent deformation...
-
Assessing Tram Infrastructure Safety Using the Example of the City of Gdańsk
PublikacjaAnalysis of Gdańsk’s tram network statistics shows that incidents are quite frequent (about 650 within 5 years) and mostly involve collisions and crashes. As well as reducing the tram systems’ efficiency and reliability, incidents have a nega-tive effect on road safety. As Polish cities extend their tram networks, they must also ensure that their existing networks are safe. This is to be achieved by conducting safety assessments....
-
Time-series analysis of road safety trends aggregated at national level in Europe for 2000-2010
PublikacjaThe reader will find in this study road safety modelling theory and time-series analysis techniques, applications to long period data of injury accidents and casualities, aggregared at national level
-
Analysis of the relationship between the length of eye fixation and the parameters of advertisements visible from the road
PublikacjaIn Poland, many advertising signs addressed to motorists are located along the roadside. Advertisements do not serve any traffic related purpose and can distract drivers making them less reliable and as a consequence, reduce road safety. The existing regulations only apply to the carriageway. The research is conducted as part of the RID project. The objective of the RID project is to create a "Manual for positioning roadside advertising...
-
Autonomous Driver Based on an Intelligent System of Decision-Making
PublikacjaThe paper presents and discusses a system (xDriver) which uses an Intelligent System of Decision-making (ISD) for the task of car driving. The principal subject is the implementation, simulation and testing of the ISD system described earlier in our publications for the task of autonomous driving. The design of the whole ISD system is a result of a thorough modelling of human psychology based on an extensive literature study. Concepts...
-
Road safety performance indicators and their explanatory value: A critical view based on the experience of Central European countries
PublikacjaCounts of road crashes and their victims represent essential information for road safety practitioners allowing them to analyse their spatial and temporal aspects. However, they cannot provide details on the factors causing road crashes. As a result, various road safety performance indicators (RSPIs) were introduced, making it possible to gather information on the effectiveness of interventions on road safety in given areas. However,...