Wyszukiwarka
Wyniki wyszukiwania dla: expected value
-
The Effect of Circular Saw Blade Clamping Diameter on its Resonant Frequencies
PublikacjaIn this paper results of comparison of characteristic resonant frequencies of circular saw blades as a function of the saw clamping diameter from the impact test are presented. Obtained results revealed that proportionally with the increase of the saw clamping diameter also the dynamical stiffness of the saw blade increased. As a consequence of that the resonant frequencies of the saw blade move to higher values. Moreover, with...
-
Information technology assessment using a functional prototype of the agent based system
PublikacjaIn the paper authors present the progress of works related with the agent-based system serving the purpose of information technology assessment. Currently this is a prototype including agents, the knowledge base and the ontology; the domain incorporated by the assessment-enterprise managing technologies with special attention paid to technologies directed to IT projects. In this paper, besides indication of expected functionalities...
-
Control of a vapour microturbine set in cogeneration applications
PublikacjaSystems with microturbines are implemented for local generation of heat and electricity. This paper presents the analysis of control concepts for a vapour microturbine set with a generator with permanent magnets, intended to work in small heat and power plants. Control system variants differed by the selection of controlled signals and set parameters. Possible ways of control were discussed and compared with experimentally determined...
-
Method of sacrificial anode transistor-driving in cathodic protection system
PublikacjaA magnesium anode driving system has been proposed. A PNP driving transistor has been used. Electrochemical testing in 3%NaCl, results and comparison of the driving system and classic direct anode to cathode connection are presented. The driving system reduced the protection current and stabilized the working conditions of the anode. Higher anode efficiency was achieved. Overprotection and hydrogen embrittlement threats were prevented...
-
ECG measurement in the bathtub - drl on one side of the bathtub, the other side of the bathtub is grounded and the system ground is grounded- men
Dane BadawczeThe measurement data shows the measurement of the ECG signal in water in the bathtub. The data includes the measurement time, the reference ECG signal from the chest, and the ECG signal measured by electrodes placed in the bathtub without contact with the human body. Using the presented data, it is possible to estimate the optimal arrangement of measuring...
-
Baltic Sea climate fever. Creative solutions for waterfront cities in the context of climate change
PublikacjaThe goal of the research is to recognize climate change impact on Baltic Sea cities and description of strengths and weaknesses of cities strategies and activities. The range of research has been limited to 3 cities in the Baltic Sea (Copenhagen, Gothenburg, Tallinn) and Tricity as an area for which recommendations will be proposed actions in the field of adaptation to climate change. Recommendations for Tricity as a unique group...
-
Positive Risk of Creativity in Software Projects: an Expected Result, a Threat or an Opportunity?
PublikacjaPositive risk of creativity appears when there is an excess of creativity. This paper aims at exploring the concept of positive risk of creativity in software projects. It presents a taxonomy of positive risks as well as case studies of positive risks in diploma software projects. It also attempts to answer the question whether positive risks should be treated as expected results of applying creativity process, or they cause additional...
-
Effect of applied standard wood machining fluid on colour and chemical composition of the machined wood surface
PublikacjaAppropriate monitoring of wood machining processes is a key issue to ensure the expected quality of the processed wood, expected efficiency and minimize energy consumption of production processes. A new trend is the design of environmentally friendly machining fluids. In this paper, as a preliminary study in this field, the effect of applied standard wood machining fluid on changes in the colour and chemical composition of the...
-
Deterministic Rendezvous in Restricted Graphs
PublikacjaIn this paper we consider the problem of synchronous rendezvous in which two anonymous mobile entities (robots) A and B are expected to meet at the same time and point in a graph G = (V;E). Most of the work devoted to rendezvous in graphs assumes that robots have access to the same sets of nodes and edges, where the topology of connections may be initially known or unknown. In our work we assume the movement of robots is restricted...
-
Antagonist adhesion effects due to variable substrate surface
PublikacjaThe effects of variability of intrinsic adhesion within a joint have been studied using a single cantilever beam (SCB) test. Fracture energy was found not to be a simple function of relative areas of 2 surface pre-treatments: a 'weak' zone decreased strength more than expected from simple, additive considerations. By severing the adhesive along the strong-weak transition, fracture energy increased.The prior antagonist effect appears...
-
Elements of six sigma methodoloygy in polish smes. the pomeranian region context
PublikacjaIn this article, it has been suggested that the effectiveness of the design and implementation of the process approach in the SMEs sector affects the effectiveness and efficiency of the application of elements of the Six Sigma ™ concept. The selected results of the research have been presented to answer the question to what extent small and medium-sized manufacturing, service and production - service companies in Pomeranian region...
-
On the modelling of aerodynamic force coefficients for over-shroud seals of turbine stages
PublikacjaThis paper presents experimental investigations which made it possible to determine dynamic coefficients of labyrinth over-shroud seal of a model air turbine. The coefficients associate pressure forces with turbine rotor displacement, velocity and acceleration respective to turbine casing (linear model) and play important role in analyzing turbine-set dynamics. The obtained results indicated that involving serious errors can be...
-
Ship Resistance Prediction with Artificial Neural Networks
PublikacjaThe paper is dedicated to a new method of ship’s resistance prediction using Artificial Neural Network (ANN). In the initial stage selected ships parameters are prepared to be used as a training and validation sets. Next step is to verify several network structures and to determine parameters with the highest influence on the result resistance. Finally, other parameters expected to impact the resistance are proposed. The research utilizes...
-
Al-DIAMOND SCHOTTKY TUNNEL DIODES WITH BARRIER HEIGHT CONTROL
PublikacjaFew-nanometer-thick very highly boron-doped p-type layers were fabricated at metal-semiconductor interfaces of Schottky barrier diodes formed with aluminum on polycrystalline diamond. Preliminary results show that hermionically-assisted tunneling mechanism results in lower voltage drops at forward biasing of these diodes than expected for the Al-diamond metal-semiconductor potential barrier B. The effective barrier height Bpeff...
-
Low-energy positron scattering from gas-phase uracil
PublikacjaQuantum scattering calculations are presented for the interaction of low energy positrons with the uracil molecule, an important component of biological systems. The rotational elastic and inelastic cross sections and vibrational inelastic cross sections are reported and compared with existing experiments, indicating a general trend of the cross sections different from the experimental findings and in line with what should be expected...
-
Sanctions and their role in preventing the appropriation of the creditor’s property rights in bankruptcy proceedings–the case of Poland
PublikacjaThe aim of this paper is to fill the cognitive gap regarding the role of sanc-tions in the protection of a creditor’s property rights in the event of an entrepreneur insolvency. The impact of sanctions on transaction costs, including their identifica-tion and types, as well as the impact on the protection of creditor rights, has been poorly recognized in the subject literature to date. This article investigates...
-
METHODS OF TEACHING SPATIAL AND URBAN PLANNING AT GEODESY AND CARTOGRAPHY
PublikacjaSpatial and town planning is a complex process caused by the interaction between natural and social systems at different temporal and spatial scales. That is the reason, why it is difficult to introduce this subject to students studying disciplines other than spatial or urban planning. The main problem is to define goals, the scope and expected educational effects. The second step is to choose the appropriate teaching and assessment...
-
Human Resource Management Digitalisation in Multidisciplinary Ship Design Companies
PublikacjaThe digitalisation in the ship design sector is currently applied to the design process itself and is well defined, partially standardised and practically implemented by both independent design companies and the design departments of shipyards. The situation is similar in other sectors of engineering. However, the requirements for the digitalisation of other processes in design and engineering companies have not previously been...
-
Study of the atomic structure and morphology of the Pt3Co nanocatalyst
PublikacjaThe local structure and chemical disorder of a commercially available Pt3Co nanocatalyst supported on high surface area carbon were investigated. High-quality XAFS spectra were collected at the ELETTRA synchrotron XAFS 11.1 beamline. XAFS spectra analysis have been performed accounting for the reduction of the coordination number and degeneracy of three-body configurations, resulting from transmission electron microscopy (TEM)...
-
Reliable underwater communication system for shallow coastal waters
PublikacjaThis paper presents a reliable and robust low data rate spread spectrum approach which is implemented in the acoustic underwater communication system for shallow coastal waters. It shows operation assumptions of spread spectrum techniques based on the wellknown Shannon equation. It describes two methods of spread spectrum: frequency hopping spread spectrum and direct sequence spread spectrum; their block diagram and their characteristics...
-
Bridging the gap between business process models and use-case models
PublikacjaToday's software development methodologies are equipped with a plethora of methods and techniques for business process engineering and Requirements Engineering. However, heavy investments in IT have not brought forth expected results. What seems to be lacking is a systematic approach that consolidates both disciplines to gain a synergistic effect. To address this challenge we extend Use-Case Driven Approach (UCDA) by binding use...
-
Analysis of the possibility of determining the general characteristics using the operational data of a vehicle engine
PublikacjaThe paper presents an analysis of the possibility of determining the general characteristics using the operational data of an engine of refuse collection vehicle. Data acquisition was done by reading information from the CAN network using FMS standard (Fleet Management System), which is widely used in heavy duty vehicles since year 2002. The paper presents the analysis of the expected measurement uncertainties resulting from the...
-
Possibilities of radioisotope measuring in control of an unstable solid particles hydrotransport
PublikacjaThe paper presents γ-radiation proposal to control a multiphase flow, independently from circumstances. So this method may be applied even in compound industrial or environmental processes. Moreover in many cases, it is the only method for applications for dense mixture containing coarse angular grains. The constructed equipment allows continuous measurement of density as well as solid phase for both concentration and average velocity....
-
UWB-Based Indoor Navigation in a Flexible Manufacturing System Using a Custom Quadrotor UAV
PublikacjaA novel solution for indoor navigation of a transportation drone in flexible manufacturing is presented in this paper. To address the challenges of accurate and robust drone navigation in occluded environments, an ultra-wideband (UWB) navigation system has been integrated with a commercially available open source control platform. The system offers high accuracy (± 20 mm), low power consumption, resistance to electronic interference,...
-
Potentiometric Solid-Contact Multisensor System for Simultaneous Measurement of Several Ions
PublikacjaThe design and performance of potentiometric multisensor system made in solid-contact technology is described. Both, the measuring electrodes as well as the reference electrode are in a compact cell. The system allows for simultaneous measurement of various ions. The characteristics of the electrodes for Na+, K+ and Ca2+ ions were determined using the designed system and compared with ISEs of the same membrane composition in classical...
-
Mobility management solutions for current IP and future networks
PublikacjaEnormous progress in the design of portable electronic devices allowed them to reach a utility level comparable to desktop computers, while still retaining their mobility advantage. At the same time new multimedia services and applications are available for IP users. Unfortunately, the performance of base IP protocol is not satisfactory in mobile environments, due to lack of handover support and higher layer mobility management...
-
Application of Multiplicative Drift Correction and Component Correction methods on simulated gas sensor array responses
PublikacjaSensor response drift is one of the most challenging problems in gas-analyzing systems. Such systems, commonly called electronic noses, are expected to be reliable and reproducible in the long term. Due to the drift phenomena, electronic noses usability is limited to the relatively short period of time, and frequent recalibrations of device are required. Because it is very hard to fabricate sensors without drift, this phenomenon...
-
Smart Karyotyping Image Selection Based on Commonsense Knowledge Reasoning
PublikacjaKaryotyping requires chromosome instances to be segmented and classified from the metaphase images. One of the difficulties in chromosome segmentation is that the chromosomes are randomly positioned in the image, and there is a great chance for chromosomes to be touched or overlap with others. It is always much easier for operators and automatic programs to tackle images without overlapping chromosomes than ones with largely overlapped...
-
Novel Low-Loss Substrates for 5G Applications
PublikacjaThis paper presents a feasibility study of a new type of microwave low-loss dielectric substrates for 5G network applications. The new substrate materials are composites of polypropylene and high-dielectric-constant micro-ceramics. This combination is expected to form a very low-loss dielectric material at low fabrication cost. Two substrate samples with different dielectric properties are fabricated and their characteristics at...
-
Neural Network Subgraphs Correlation with Trained Model Accuracy
PublikacjaNeural Architecture Search (NAS) is a computationally demanding process of finding optimal neural network architecture for a given task. Conceptually, NAS comprises applying a search strategy on a predefined search space accompanied by a performance evaluation method. The design of search space alone is expected to substantially impact NAS efficiency. We consider neural networks as graphs and find a correlation between the presence...
-
Ring thruster - a preliminary optimisation study
PublikacjaThe ring thruster is a new type of propeller, for which there is no experimental data to verify analytical design calculations. A significant feature of the ring thruster is the absence of a shaft. Propeller blades are mounted to the ring rotating inside the housing, which has the shape of a nozzle. For this reason the ring thruster is closest, with respect to both the construction and principle of operation, to the Kort nozzle...
-
Extreme weather layer method for implementation of nature-based solutions for climate adaptation: Case study Słupsk
PublikacjaOne of the most severe climate risks that is expected to affect all regions is related to stormwater. Climate models, constructed based on long-term trends, show that extreme weather events such as storms, cloudbursts and a large rise in sea level will be significant in the coming decades. Moreover, even the frequency and intensity of “normal” rainfall events, such as microbursts, are expected to be remarkably higher than today...
-
Four-body recombination in organic bulk heterojunction solar cells: an alternative interpretation
PublikacjaWe demonstrate a new interpretation of the previously reported quadrimolecular recombination in organic bulk heterojunction solar cells. It is suggested that the recently described (Szmytkowski 2012 Phys. Status Solidi RRL 6 300) interaction between exciton and electron–hole Langevin bound pair formed across the donor–acceptor interface is a four-particle process. This is in opposition to the treatment of this effect as a three-particle...
-
A framework for automatic detection of abandoned luggage in airport terminal
PublikacjaA framework for automatic detection of events in a video stream transmitted from a monitoring system is presented. The framework is based on the widely used background subtraction and object tracking algorithms. The authors elaborated an algorithm for detection of left and removed objects based on mor-phological processing and edge detection. The event detection algorithm collects and analyzes data of all the moving objects in...
-
Methods of Incomplete and Uncertain Knowledge Acquisition in the Knowledge Processing Environemnt
PublikacjaThe authors in this paper present a concept of the environment to acquire and process knowledge about information technology. This solution is part of a project of which the objective is to build a system for the evaluation of IT tools and methodologies. Knowledge within this domain is always either uncertain or incomplete. Therefore, the authors focused on designing a dedicated algorithm for its acquisition and processing. One...
-
Remote Estimation of Video-Based Vital Signs in Emotion Invocation Studies
PublikacjaAbstract— The goal of this study is to examine the influence of various imitated and video invoked emotions on the vital signs (respiratory and pulse rates). We also perform an analysis of the possibility to extract signals from sequences acquired with cost-effective cameras. The preliminary results show that the respiratory rate allows for better separation of some emotions than the pulse rate, yet this relation highly depends...
-
Superconductivity of Ta-Hf and Ta-Zr alloys: Potential alloys for use in superconducting devices
PublikacjaThe electronic properties relevant to superconductivity are reported for bulk Ta-Hf and Ta-Zr body centered cubic alloys, in a large part to determine whether their properties are suitable for potential use in superconducting qbits. The body centered cubic unit cell sizes increase with increasing alloying. The results of magnetic susceptibility, electrical resistivity, and heat capacity characterization are reported. While elemental...
-
Analysis and Comparison of Safety of Children and Adult Passenger in Car Based on Crash Tests Results
PublikacjaMost important features of the child seat were presented. There was made analysis of selected dynamic loads acting on mannequins heads during a collision. Comparison of loads acting on the kid in a child seat and the other passengers in a car is presented. In analysis of the results particular attention has been paid on the children's secure in a car. The phenomena of collision child's occipital bone with seat backrest was described....
-
Construction of phylogenetic trees with topological constraints
PublikacjaThis paper proposes a method of reconstruction of phylogenetic trees based on heuristic search with topological constraints. Using topological constraints it is possible to reduce the set of solutions as well as to enforce that the result is consistent with a given hypothesis about the evolution process within some group of species. Along with this work a number of algorithms used for phylogenetic analysis were implemented. Those...
-
Developing Prognostic Models of Organization Evolution
PublikacjaThe work focuses on the problem of measuring evolution of IT organizations. Changes in business influence functioning of the IT organization. IT departments or companies must ensure that the needs of their parent company/customers will be met. Therefore they must constantly evolve. Following question can be raised: is it possible to support process of changes the IT organization to run it smoother, faster, easier but with reduced...
-
Evaluating the position of a mobile robot using accelerometer data
PublikacjaThis paper analyses the problem of determining the position of a robot using an accelerometer, which is an essential part of inertial measurement units (IMU). The information gained from such a gauge, however, requires double integration of sensor data. To assure an expected effect, a mathematical model of a low-cost accelerometer of the MEMS type is derived. Moreover, in order to improve the performance of positioning based on...
-
Evaluating the mobile robot positions using accelerometer data
PublikacjaThis paper analyzes the problem of determining the position of a robot using an accelerometer, which is an essential part of inertial measurement units (IMU). The information gained from such a gauge, however, requires double integration of sensor data. To assure an expected effect, a mathematical model of a low-cost accelerometer of the MEMS type is derived. Moreover, in order to improve the performance of positioning based on...
-
Influence of a Radio Frequency on RF Fingerprinting Accuracy Based on Ray Tracing Simulation
PublikacjaIn this paper the influence of a radio signal frequency on performance of Indoor Positioning System based on fingerprinting has been examined using ray-tracing simulations. It has been simulated how spatial distribution of an RF signal strength change with the signal’s frequency. The results were used to show its’ impact on the behavior of localization algorithms that are employing RSS measurements to determine node’s position...
-
Central-force decomposition of spline-based modified embedded atom method potential
PublikacjaCentral-force decompositions are fundamental to the calculation of stress fields in atomic systems by means of Hardy stress. We derive expressions for a central-force decomposition of the spline-based modified embedded atom method (s-MEAM) potential. The expressions are subsequently simplified to a form that can be readily used in molecular-dynamics simulations, enabling the calculation of the spatial distribution of stress in...
-
The concept of streamlining the logistics processs at the company
PublikacjaThe aim of the article is to present a concept related to the improvement of the logistics process at the company, by the modernisation of the main railway siding of the terminal. The paper present the reasons for the decision that was once made in order to obtain the expected advantages after the modernisation. The comparison of the incurred expenses and the profits that might be gained in the...
-
To i-vote or not to i-vote: Drivers and barriers to the implementation of internet voting
PublikacjaThis paper investigates the drivers and barriers of internet voting and the implications of a global pandemic for the development of the respective technology. In contrast to the expected uptake in the early 2000s of internet voting, the technology is still rather seldomly used in election systems around the world. The paper at hand explores the different forces that drive or impede internet voting adoption from a political, social,...
-
Topological, nonreciprocal, and multiresonant slow light beyond the time-bandwidth limit
PublikacjaTopologically protected transport has recently emerged as an effective means to address a recurring problem hampering the field of slow light for the past two decades: its keen sensitivity to disorders and structural imperfections. With it, there has been renewed interest in efforts to overcome the delay-time-bandwidth limitation usually characterizing slow-light devices, on occasion thought to be a fundamental limit. What exactly...
-
Assessment of User Mobility’s Influence on System Loss in Several Body-to-Body Scenarios
PublikacjaIn this paper, Body-to-Body communications in indoor and outdoor environments for different on-body antenna configurations and different mobility scenarios were studied, based on system loss measurements at 2.45 GHz. The main objective is to properly characterise the influence of the Transmitter-Receiver configuration on system loss and fast fading behaviour, the latter being modelled by the Rice Distribution. Globally, it is observed...
-
Colvolutional calibration of AFM probe
Dane BadawczeAtomic force microscopy is based on the interaction of the examined surface with a probe of a pyramidal shape, tipped with a sharp end with a radius of curvature ranging from single nanometers to hundreds of nanometers. The resolution of the obtained image is of course dependent on the above-mentioned geometric size, and the resulting image is a convolutional...
-
Do new EU members have any chance of earning as much as Westerns do?
PublikacjaThis article examines the wage dispersion in the European Union in the last ten years (1996-2006). The research is motivated by the fact that New Members States (NMS) expected that wage convergence would occurred after their accession to the EU. At the same time Old Member States (OMS) have been increasingly concerned with the possibility that the EU enlargement could influence their local labor markets and wages through new channels...