Search
Filters
total: 383
filtered: 353
Search results for: FLEXIBLE
-
Synthesis and thermal studies of flexible polyurethane nanocomposite foams obtained using nanoclay modified with flame retardant compound
PublicationThis work presents thermal studies of nanocomposites based on the flexible polyurethane (PU) matrix and filled using montmorillonite organically modified with organophosphorus flame retardant compound. Flexible PU nanocomposite foams were prepared in the reaction carried out between reactive alcoholic hydroxyl and isocyanate groups with the ratio of NCO to OH groups equal to 1.05. The amount of an organoclay ranging from 3 to 9...
-
Tuning the Laser-Induced Processing of 3D Porous Graphenic Nanostructures by Boron-Doped Diamond Particles for Flexible Microsupercapacitors
PublicationCarbon (sp3)-on-carbon (sp2) materials have the potential to revolutionize fields such as energy storage and microelectronics. However, the rational engineering and printing of carbon-on-carbon materials on flexible substrates remains a challenge in wearable electronics technology. This study demon-strates the scalable fabrication of flexible laser-induced graphene (LIG)-boron doped diamond nanowall (BDNW) hybrid nanostructures...
-
Structural Changes and Their Implications in Foamed Flexible Polyurethane Composites Filled with Rapeseed Oil-Treated Ground Tire Rubber
PublicationThe utilization of post-consumer car tires is an essential issue from an ecological andeconomic point of view. One of the simplest and the least harmful methods is their material recyclingresulting in ground tire rubber (GTR), which can be further applied as fillers for polymer-basedcomposites. Nevertheless, insufficient interfacial interactions implicate the necessity of GTR modi-fication before introduction into polymer matrices....
-
Flexible syngas-biogas-hydrogen fueling spark-ignition engine behaviors with optimized fuel compositions and control parameters
PublicationThis paper presents the results research on the optimal fuel compositions and the control parameters of the spark ignition engine fueled with syngas-biogas-hydrogen for the purpose of setting up a flexible electronic control unit for the engine working in a solar-biomass hybrid renewable energy system. In syngas-biogas-hydrogen mixture, the optimal content of hydrogen and biogas is 20% and 30%, respectively. Exceeding these thresholds,...
-
The optimal control at energy performance index as a rule for vibration surveillance in the hybrid system by on example of milling flexible details
PublicationPraca dotyczy nadzorowania drgań w niestacjonarnych układach mechanicznych za pomocą sterowania optymalnego pry energetycznym wskaźniku jakości. W układzie drgającym wyodrębniono podukłady: modalny, strukturalny oraz łączący. Dynamikę układu sterowanego opisano we współrzędnych hybrydowych. Przedstawiono przykład nadzorowania drgań podczas obróbki przedmiotów podatnych smukłym frezem kulistym. Paramatry obliczeniowego modelu modalnego...
-
One dimensional coordination polymers generated from Cd(II) tri-tert-butoxysilanethiolates and flexible aliphatic diamines.
PublicationPraca ta dotyczy chemii koordynacyjnej tri-tert-butoksysilanotiolanu kadmu(II) z diaminami alifatycznymi. Reakcja dwucentowego [Cd{SSi(OtBu)3}2]2 z poszczególnymi diaminami pozwala otrzymać pięć nowych obojętnych jednowymiarowych polimerów koordynacyjnych o różnej topologii łańcuchów [Cd{SSi(OtBu)3}2(μ-C4H12N2)(CH3OH)]n (1), [Cd{SSi(OtBu)3}2(μ-C5H14N2)(CH3OH)]n (2) [Cd{SSi(OtBu)3}2(μ-C6H16N2)(CH3OH)]n (3), [Cd{SSi(OtBu)3}2(μ-C7H18N2)]n...
-
Coplanar Waveguide-Fed Broadband Microwave Devices with (or without) a Thin Dielectric Substrate for Use in Flexible Electronic Systems
PublicationTwo examples of microwave devices, fed by a coplanar waveguide and realized on a thin substrate (or without such a substrate), are employed to investigate the influence of devices’ curvatures and the proximity of different materials on their parameters. To perform the tests, a broadband antenna and a low-pass filter are chosen. A feeding coplanar waveguide is realized on a dielectric material brick attached to an SMA connector...
-
Fire-Retardant Flexible Foamed Polyurethane (PU)-Based Composites: Armed and Charmed Ground Tire Rubber (GTR) Particles
PublicationInadequate fire resistance of polymers raises questions about their advanced applications. Flexible polyurethane (PU) foams have myriad applications but inherently suffer from very high flammability. Because of the dependency of the ultimate properties (mechanical and damping performance) of PU foams on their cellular structure, reinforcement of PU with additives brings about further concerns. Though they are highly flammable and...
-
Flexible Films as Anode Materials Based on rGO and TiO2/MnO2 in Li-Ion Batteries Free of Non-Active Agents
Publication -
Vibration surveillance during ball end milling of curved flexible details on a basis of assessment of assurance of the model of real object
PublicationW pracy przedstawiono nową metodę nadzorowania drgań podczas frezowania zakrzywionych przedmiotów podatnych. Wykorzystano model modalny przedmiotu obrabianego, którego parametry zidentyfikowano na bazie badań doświadczalnych oraz analizy komputerowej. Zastosowanie modelu metody elementów skończonych, którego zachowanie jest zgodne z przedmiotem uformowanym w postaci cienkościennej powierzchni półwalcowej, a następnie - utworzenie...
-
Eco-Friendly Electromagnetic Interference Shielding Materials from Flexible Reduced Graphene Oxide Filled Polycaprolactone/Polyaniline Nanocomposites
PublicationHybrid nanocomposites have the unique ability of enhancing material properties due to the existing synergistic effect of the fillers. In this study, the authors report such an eco-friendly hybrid nanocomposite comprising of polyaniline and reduced graphene oxide in polycaprolactone. The conducting polyaniline improved the processability of polycaprolactone, and the final composites were prepared by incorporating graphene oxide...
-
Improving the Performance of a Graphite Foil/Polyaniline Electrode Material by a Thin PEDOT:PSS Layer for Application in Flexible, High Power Supercapacitors
PublicationIn this study, we present a novel strategy for enhancing polyaniline stability and thus obtaining an electrode material with practical application in supercapacitors. A promising (graphite foil/polyaniline/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) GF/PANI/PEDOT:PSS) electrode material was characterized and used in the construction of a symmetric supercapacitor that provides an outstanding high power density. For this...
-
The Impact of Ground Tire Rubber Oxidation with H2O2 and KMnO4 on the Structure and Performance of Flexible Polyurethane/Ground Tire Rubber Composite Foams
PublicationThe use of waste tires is a very critical issue, considering their environmental and economic implications. One of the simplest and the least harmful methods is conversion of tires into ground tire rubber (GTR), which can be introduced into different polymer matrices as a filler. However, these applications often require proper modifications to provide compatibility with the polymer matrix. In this study, we examined the impact...
-
Vibration surveillance during ball end milling of curved flexible details, considering an assessment of assurance between analysis and test model
PublicationPraca dotyczy nadzorowania drgań podczas obróbki smukłym frezem kulistym przedmiotów podatnych o powierzchniach zakrzywionych. Przedstawiono analizę dynamiczną niestacjonarnego układu drgającego, w którym wyodrębniono podukłady: modalny, strukturalny i łączący. Dokonano oceny zgodności wyników obliczeń numerycznych z wynikami pomiarów na frezarce Mikron VCP 600.
-
Możliwości zwiększenia jakości części maszyn w elastycznie zautomatyzowanej produkcji.Abilities of quality improvement of machine's parts in flexible automated manufacturing.
PublicationWzrastające wymagania dotyczące obniżania kosztów oraz coraz to wyższe wymagania stawiane wyrobom pod względem jakościowym powodują, że działania związane z zapewnieniem jakości stają się decydującym czynnikiem konkurencyjności. Integracja tych działań w systemach sterowania elastycznych urządzeń wytwórczych jest konieczna w celu zapewnienia ekonomicznie efektywnej produkcji realizowanej pod nadzorem takich systemów.Elastyczny...
-
Flexible dye-sensitized solar cells based on Ti/TiO2 nanotubes photoanode and Pt-free and TCO-free counter electrode system
PublicationFlexible dye-sensitized solar cells (DSSCs) are getting more attention compared to standard glass covered DSSCs due to their unique commercial applications (e.g. tents or sail surfaces) and the possibility of rolling up into a small, portable device. In this work, titania nanotubes (TiO2 NT) modified with titania nanoparticles (TiO2 NP) were photoelectrochemically characterized as an anode for flexible dye-sensitized solar cells....
-
Comprehensive Enhancement of Prepolymer-Based Flexible Polyurethane Foams’ Performance by Introduction of Cost-Effective Waste-Based Ground Tire Rubber Particles
PublicationMaterial innovations in polyurethane (PU) foams should ideally combine performance enhancement, environmental impact limitation, and cost reduction. These goals can be achieved by applying recycled or waste-based materials without broader industrial applications, implicating their low price. Herein, from 5 to 20 parts by weight of ground tire rubber (GTR) particles originated from the recycling of postconsumer car tires were incorporated...
-
The impact of filler thermomechanical modifications on static and dynamic mechanical performance of flexible foamed polyurethane/ground tire rubber/zinc borate composites
PublicationThe rapid development of the automotive industry is very beneficial to many aspects of human life, but it is also a very significant environmental burden. The most straightforward impact is related to the generation of exhaust, but the management of post-consumer car parts is also a major challenge. Among them, waste tires are very burdensome due to their enormous numbers. Therefore, it is essential to develop novel, environmentally...
-
Composite Polyurethane-Polylactide (PUR/PLA) Flexible Filaments for 3D Fused Filament Fabrication (FFF) of Antibacterial Wound Dressings for Skin Regeneration
Publicationhis paper addresses the potential application of flexible thermoplastic polyurethane (TPU) and poly(lactic acid) (PLA) compositions as a material for the production of antibacterial wound dressings using the Fused Filament Fabrication (FFF) 3D printing method. On the market, there are medical-grade polyurethane filaments available, but few of them have properties required for the fabrication of wound dressings, such as flexibility...
-
One-Step Synergistic Effect to Produce Two-Dimensional N-Doped Hierarchical Porous Carbon Nanosheets for High-Performance Flexible Supercapacitors
Publication -
Flexible Knowledge–Vision–Integration Platform for Personal Protective Equipment Detection and Classification Using Hierarchical Convolutional Neural Networks and Active Leaning
PublicationThis work is part of an effort to develop of a Knowledge-Vision Integration Platform for Hazard Control (KVIP-HC) in industrial workplaces, adaptable to a wide range of industrial environments. The paper focuses on hazards resulted from the non-use of personal protective equipment (PPE). The objective is to test the capability of the platform to adapt to different industrial environments by simulating the process of randomly selecting...
-
Inhibiting activity of HIV-1: protease, reverse transcriptase and integrase all together by novel compounds using computational approaches (flexible and rigid docking)
PublicationAcquired immunodeficiency syndrome (AIDS), caused by human immunodeficiency virus type 1 (HIV-1) infection, is one of the most challenging diseases in recent decades. Nevertheless the shortcomings of chemical drugs such as toxicity, lack of curative effects, the search for more potent anti-HIV agents have been focused in our study. In current study, novel scaffold was designed having a benzyl and imidazole in it which are very...
-
Enzymatic cleavage of specific dipeptide conjugated with ferrocene as a flexible ultra-sensitive and fast voltammetric assay of matrix metalloproteinase-9 considered a prognostic cancer biomarker in plasma samples
Publication -
Na3PO4 assistant dispersion of nano-CaCO3 template to enhance electrochemical interface: N/O/P co-doped porous carbon hybrids towards high-performance flexible supercapacitors
Publication -
Zastosowanie elementów "węzłowych" do budowy modelu 3D cewki giętkiej w programie polowym OPERA 3D = Application of "nodal" elements for creation of a 3D model of a flexible coil in the program Opera 3D
PublicationNiniejsza praca jest kontynuacją serii artykułów dotyczących modelowania 3D uzwojenia maszyn elektrycznych z cewkami giętkimi. Istotnym problemem dotyczącym modelowania takiego uzwojenia jest zmienność kształtu przekroju poprzecznego zwłaszcza w części czołowej. Powoduje to problemy w utworzeniu uzwojenia bez konfliktów wymiarowych (nie przenikanie się wierzchołków, przyleganie boków cewek, odpowiednie położenie). Niektóre programy...
-
Allocation of tools to machines in a flexible machining cell. W: Computerintegrated manufacturing. Advanced design and management. Ed.: B. Skołud, D. Krenczyk. Warszawa: Wydaw. Nauk.-Tech.**2003 s. 486-493, 5 rys. 2 tabl.bibliogr. 10 poz. Przydział narzędzi do obrabiarek w elastycznym gnieździe obróbkowym.
PublicationPrzedstawiono zagadnienia modelowania i analizy przepływu narzędzi w wielo-maszynowym elastycznym gnieździe, zorientowanym na wytwarzanie przedmiotów klasy korpus. Zaproponowano oryginalną metodę i algorytmy współbieżnego sze-regowania zadań produkcyjnych i przydziału narzędzi w warunkach ograniczono-ści zasobów systemu. Wybrane strategie przydziału operacji technologicznych i adekwatnych zestawów narzędziowych poddano analizie...
-
Flexibles Fügen leichter Tragwerkstrukturen durch Einwalzen.
PublicationW artykule przedstawiono wyniki prac zmierzających do zbadania możliwości łączenia rur aluminiowych AlMgSi0,5 przez ich rozgniatanie nagniatakiem stosowanym do obróbki powierzchni wewnętrznych. Badania, ukierunkowane na przemysłowe wdrażanie alternatywnych metod łączenia rur w konstrukcjach lekkich, przeprowadzono w ramach niemieckiego programu SFB/TR10, kierowanego przez Uniwersytet w Dortmundzie.
-
Production activity control in a flexible machining cell considering part measuring condition. W: Computer integrated manufacturing. Advanced design and management. Ed.: B. Skołud, D. Krenczyk. Warszawa: Wydaw. Nauk.-Tech. **2003 s. 494-501, 6 rys. 1 tabl. bibliogr. 9 poz. Sterowanie procesu produkcyjnego w elastycznym gnieździe obróbkowym z uwzg- lędnieniem funkcji kontroli wytwarzanych przedmiotów.
PublicationPrzedstawiono modele struktur organizacyjnych przebiegu procesu organizacyj-nego w rzeczywistym zrobotyzowanym elastycznym gnieździe obróbki (EGO) z udziałem współrzędnościowej maszyny pomiarowej CNC. Badano eksperymentalnie występujące współzależności pomiędzy analizowanymi planami kontroli przed-miotów wytwarzanych i strategiami szeregowania operacji procesu technologi-cznego obróbki, z wykorzystaniem zintegrowanych modeli...
-
Particle Shape Effect on Macroscopic Behaviour of Underground Structures: Numerical and Experimental Study
PublicationThe mechanical performance of underground flexible structures such as buried pipes or culverts made of plastics depend not only on the properties of the structure, but also the material surrounding it. Flexible drains can deflect by 30% with the joints staying tight, or even invert. Large deformations of the structure are difficult to model in the framework of Finite Element Method, but straightforward in Discrete Element Methods....
-
Particle Shape Effect on Macroscopic Behaviour of Underground Structures: Numerical and Experimental Study
PublicationAbstract: The mechanical performance of underground flexible structures such as buried pipes or culverts made of plastics depend not only on the properties of the structure, but also on the material surrounding it. Flexible drains can deflect by 30% with the joints staying tight, or even invert. Large deformations of the structure are difficult to model in the framework of Finite Element Method, but straightforward in Discrete...
-
Process zone in the Single Cantilever Beam under transverse loading. - Part II: Experimental
PublicationThis paper describes an experimental arrangement to evaluate stress/strain fields in the process zone of asymmetric adhesively bonded joints. A transparent polycarbonate flexible beam was bonded to an aluminium alloy rigid block with an epoxy adhesive in a Single Cantilever Beam (SCB) configuration. The flexible adherend was loaded in the direction parallel to the initial crack front at constant rate. To monitor strains induced...
-
Experimental Study on Pounding between Structures during Damaging Earthquakes
PublicationMutual pounding between structures during earthquakes may cause serious structural damage. The aim of this paper is to show the results of a shaking table experimental study focused on pounding between structures in series under several earthquake excitations. The experiments were performed using three tower models with different configurations and different gap distances between them. In the first stage of the study, one rigid...
-
ESTYMACJA WSPÓŁCZYNNIKÓW SZTYWNOŚCI ZAMOCOWANIA PODATNEGO PRZEDMIOTU OBRABIANEGO NA STOLE FREZARKI
PublicationW pracy przedstawiono metodę estymacji współczynników sztywności Elementów Sprężystych (ES) modelujących zamocowanie podatnego wielkogabarytowego przedmiotu obrabianego na stole frezarki. Proponowana metoda bazuje na algorytmie optymizacji za pomocą roju cząstek (ang. Particle Swarm Optimization), który pozwala na uzyskanie dobrej zgodności (aktualizacji) modelu Metody Elementów Skończonych (MES) z modelem pochodzącym z identyfikacji...
-
Experimental study on static and dynamic properties of polymer mass
PublicationA new method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure. The aim of the...
-
Comparison of elastic and viscoelastic analysis of asphalt pavement at high temperature
PublicationThere are many various rheological models which are used for modeling of asphalt layers in flexible pavement structures. It can be expected that the use of various models may affect different results of mechanical pavement calculations and analysis. The paper presents comparison of the use of Burgers’ and Huet-Sayegh’s viscoelastic models and Hooke’s elastic model to calculate pavement deflections and strains at the bottom of asphalt...
-
Experimental examination of an elastomeric polymer
PublicationA new method of repairing damaged structures by filling the cracks with a specially prepared elastomeric polymer mass has been recently proposed. This new and innovative technique, known as the Flexible Joint Method (FJM), is mainly dedicated to masonries and historical objects, where minimum intervention is permitted. The flexible joint bonds the disrupted elements and ensures further safe exploitation of a damaged structure....
-
The influence of variants of finishing machining on scheduling of shaft components manufacturing
PublicationIn the paper variants of technological processes were presented to the study for piston rods and rams of hydraulic cylinders taking issues into consideration scheduling of course of the production in flexible manufacturing cell. At the carried study an attempt of the estimation of the influence of technological variants on the effectiveness to manufacture the flexible manufacturing system on the basis of preliminary schedules of...
-
Recycled Polyurethane as a Second Phase in Thermoset Blends and Its Effect on Thermal Degradation Kinetics Studies
PublicationA new approach is introduced in the modification of thermosetting polymer by using different amount of polyurethane of waste origin. The post consumer polyurethane foam coatings are degraded using glycolysis process and the recycled product is further converted into new polyurethane. The blending of recycled polyurethane with epoxy exhibits transparency and produces nanostructures. The effective interaction between two polymers...
-
The POCOBIO Database for Computed Scattering Cross-Sections for Positron Collisions with Biomolecular Systems
PublicationThe design of a database for positron interactions with biomolecular systems is outlined. The database contains only scattering cross sections, which are derived from theory. The data model is defined in a very flexible way, which facilitates the usage of weakly bound clusters of molecules and molecular systems with many tautomeric forms.
-
Influence of windsurfing fin stiffness distribution on the lift-drag characteristics
PublicationThis article addresses the problem of determining the hydromechanical loads generated by flexible hydrofoils. The research was done on the example of the composite windsurfing fin for the RS:X monotype class. Despite the assumption of fins identity, everyday practice showed that variations of mechanical properties occur and strongly affect their performance. Therefore, we decided to study the differences between the windsurfing...
-
Adapting a General Tool to Monitoring Multi-Agent Systems Through Virtual Host Layer Extenstion
PublicationNagios is a free software for IT infrastructure monitoring. Out-of-the-box it is not suited for monitoring multi-agent systems, because agents may dynamically join and leave the system or change roles. But Nagios' flexible configuration makes extensions possible. This paper presents and verifies Nagios configuration and extensions for monitoring multi-agent systems.
-
Fabrication and Characterization of Green Polyurethane Foams with Enhanced Vibration Damping Capability
PublicationOver the past decades, there has been an intensive development of the technologies and innovations aimed at increasing the quality of life. This development largely concerns the comfort of use of everyday products that, among others, are products of the automotive, construction, or furniture industries. Considering the increase in the comfort of using products such as cars, houses, and flats, one of the comfort features of their...
-
Experimental and Numerical Study on Pounding of Structures in Series
PublicationPounding between structures in series during earthquakes may cause serious damage in the structural elements. The aim of this paper is to show the results of an experimental and numerical study that is focused on pounding between more than two structures which may be described as “structures in series”. In this study, the shaking table experiments, as well as the numerical analyses, were performed using three tower models including...
-
Drivetrain of a Wind Turbine
PublicationIn a most commonly met design of a wind turbine the power is transmitted from the rotor to the generator through the system composed of the main shaft, friction connection, multiplying gearbox and a flexible coupling. The driving system comprises almost a complete set of the machine elements being described during machine design lectures and can serve as an interesting illustration...
-
UKŁAD PRZENIESIENIA NAPĘDU TURBINY WIATROWEJ
PublicationIn a most commonly met design of a wind turbine the power is transmitted from the rotor to the generator through the system composed of the main shaft, friction connection, multiplicating gearbox and a flexible coupling. The driving system comprises almost a complete set of the machine elements being described during machine design lectures and can serve as an interesting illustration of the lectures.
-
Wideband crossover structure with double ring resonators
PublicationThe structure of a four-port microstrip crossover is presented. The device is composed of two ring resonators, one circular and one built from meander lines, connected by four straight lines. The equivalent circuit model of the crossover is derived. The structure is designed on thin and flexible substrate to allow it to bend. The possibility of applying the device on curved surfaces is tested experimentally.
-
Experimental determination of basic mechanical properties of elastomeric polymer
PublicationThere are a lot of different methods of repairing and reinforcing damaged structures, but when it comes to historical buildings and other cultural heritage objects, it is as much about mechanical safety as the aesthetical aspects. Recently, a new and innovative method of repairing damaged structures by filling the cracks with a specially prepared polymer mass has been proposed. This new and innovative technique, known as the Flexible...
-
Novel single-stage buck-boost inverter with unfolding circuit
PublicationA novel solution of a single-stage buck-boost inverter with unfolding circuit at the output stage is presented. The inverter has a wide range of input voltage regulation, minimum passive components and a very flexible control structure. It can be applied for renewable energy systems where high power density is required. Our simulation results confirmed all theoretical statements
-
Piękno i Energia – odnalezione wartości w budowaniu współczesnego miejskiego środowiska zamieszkania
Publication.
-
Business Process Modelling and Enterprise Improvement Analysis
PublicationThe main trends in developing an approach and tools for business process modelling are discussed. Business Process Management (BPM) and BPM Notation (BPMN) are presented. Moreover, the possibilities of C2NIWA in a wide range of these tools running on a supercomputer are suggested. Firstly, the company development strategy can be planned . Secondly, quick and flexible changes of its processes can be modelled, analysed and implemented....