Search results for: GEOMETRICAL ARGUMENTS
-
MORPHOLOGY OF BUILDING DEVELOPMENT AS AN ELEMENT OF URBAN VENTIALTION SYSTEM
PublicationProblems related to air quality in large urban agglomerations (e.g., high concentration of pollutants, the urban heat island phenomenon) make it necessary to take comprehensive measures to improve air exchange in urban areas.The article concerns the relationship between wind phenomena observable in cities and the geometrical features of building development. The knowledge on the subject is already well-founded and has been intensively...
-
On Decomposition-Based Surrogate-Assisted Optimization of Leaky Wave Antenna Input Characteristics for Beam Scanning Applications
PublicationRecent years have witnessed a growing interest in reconfigurable antenna systems. Travelling wave antennas (TWAs) and leaky wave antennas (LWAs) are representative examples of structures featuring a great level of flexibility (e.g., straightforward implementation of beam scanning), relatively simple geometrical structure, low profile, and low fabrication cost. Notwithstanding, the design process of TWAs/LWAs is a challenging endeavor...
-
Improvement of the Chimney Effect in Stack Ventilation
PublicationThe article is focused on the airflow in a ventilation system in a building. The work examines the methods which enhance the chimney effect. In this paper, three cases with different chimneys were analyzed for the full-scale experiment. These cases were characterized by different geometrical and material parameters, leading to differences in the intensity of the ventilation airflow. The common denominator of the cases was the room...
-
The influence of microjet array area ratio on heat transfer in the compact heat exchanger
PublicationThe paper describes the comprehensive study on the effect of microjet array geometrical parameters on the heat transfer enhancement in the modular heat exchanger. The conducted experimental study provides an experimental database on single phase submerged microjet heat transfer. The Wilson plot method was applied to determine the heat transfer coefficients in the laminar and transition flow regimes of a liquid-to-liquid heat exchanger....
-
Topological modifications for performance improvement and size reduction of wideband antenna structures
PublicationCompact antennas belong to the key components of modern communication systems. Their miniaturization is often achieved by introducing appropriate topological changes such as simple ground plane slots or tapered feeds. More sophisticated modifications are rarely considered in the literature because they normally lead to significant increase of the number of tunable parameters, which makes the antenna design process more challenging....
-
On the application of magnetoelastic properties measureme nts for plastic level determination in martensitic steels
PublicationThe change in the dislocation density, induced by plastic deformation, influences strongly the magnetic domain structure inside the material. Being so, classic parameters, like the coercivity or magnetic permeability, can be a good measure of the deformation level, yet their reliable determination in a non-destructive way in industrial environment is problematic. The magnetoacoustic emission (MAE) which results from the non-180...
-
Surface effects of network materials based on strain gradient homogenized media
PublicationThe asymptotic homogenization of periodic network materials modeled as beam networks is pursued in this contribution, accounting for surface effects arising from the presence of a thin coating on the surface of the structural beam elements of the network. Cauchy and second gradient effective continua are considered and enhanced by the consideration of surface effects. The asymptotic homogenization technique is here extended to...
-
Edgewise Compressive Behavior of Composite Structural Insulated Panels with Magnesium Oxide Board Facings
PublicationEdgewise compression response of a composite structural insulated panel (CSIP) with magnesium oxide board facings was investigated. The discussed CSIP is a novel multifunctional sandwich panel introduced to the housing industry as a part of the wall, floor, and roof assemblies. The study aims to propose a computational tool for reliable prediction of failure modes of CSIPs subjected to concentric and eccentric axial loads. An advanced...
-
On weak solutions of the boundary value problem within linear dilatational strain gradient elasticity for polyhedral Lipschitz domains
PublicationWe provide the proof of an existence and uniqueness theorem for weak solutions of the equilibrium problem in linear dilatational strain gradient elasticity for bodies occupying, in the reference configuration, Lipschitz domains with edges. The considered elastic model belongs to the class of so-called incomplete strain gradient continua whose potential energy density depends quadratically on linear strains and on the gradient of...
-
Installation of GNSS receivers on a mobile railway platform – methodology and measurement aspects
PublicationDetermining the course of a railway track axis using satellite methods relies on ensuring the precise assembly of GNSS receivers in dedicated measuring devices. Depending on the number of receivers, solutions that are based on placing the apparatus directly above the railway track axis (as well as in eccentric positions) are used to indirectly obtain data to form the basis of the desired results. This publication describes the...
-
The issues of participation in didactics of design. Case studies
PublicationThis article seeks to present and assess the usefulness of didactic methods aimed at preparing future architects for their role in the process of social participation. The article focuses on [a] a general overview of selected participation methods and tools, along with the examples of their application in the context of spatial management in Poland; [b] an overview of teaching methods used with a view to enhancing participation...
-
RE-SHAPING THE LAND AND WATER CONNECTIONS AND ITS ROLE IN ACHIEVING LANDSCAPE AND ECOLOGICAL SYSTEMS’ CONTINUITY ON THE POST-INDUSTRIAL TERRITORIES
PublicationThis paper delves into recently applied strategies of creating new water areas and modifying the existing ones as a part of the transformation processes of post-industrial territories. It proves that while the pursuit for unique architectural and urban space values remains an important factor contributing to such modifications, they may also play an important role in reclaiming ecological systems continuity. On the basis of theoretical...
-
Geometria Wykreślna na kierunku Budownictwo 2023/2024
e-Learning CoursesPrzedmiot o nazwie Geometria Wykreślna dla I sem. studiów stacjonarnych kierunku Budownictwo. Geometria Wykreślna na kierunku Budownictwo 2023/2024 (zima), kurs wspierający przedmiot Geometria Wykreślna, (PG_00043984) przeznaczony dla studentów: Kierunek studiów: BudownictwoPoziom kształcenia: I stopnia - inżynierskie Rok akademicki realizacji przedmiotu: 2023/2024 Forma studiów: stacjonarne Rok studiów: 1 Semestr: 1 (zimowy)
-
GEOMETRIA I GRAFIKA INŻYNIERSKA [TWiE][2022/23]
e-Learning Courses -
Algebra liniowa i geometria ćwiczenia 2022/2023
e-Learning CoursesKurs do zajęć stacjonarnych dla kierunku Nanotechnologia semestr 1
-
GEOMETRIA I GRAFIKA INŻYNIERSKA [Niestacjonarne][2021/22]
e-Learning Courses -
GEOMETRIA I GRAFIKA INŻYNIERSKA [ET][2023/24]
e-Learning Courses -
Geometria Wykreślna, 1 sem. GiK (2023/2024)
e-Learning CoursesKurs przeznaczony dla studentów I semestru kierunku Geodezji i Kartografii WILIŚ PG
-
Grafika inżynierska - geometria wykreślna 2023/24 - egzamin
e-Learning CoursesKurs dla studentów kierunku: Gospodarka Przestrzenna sem.1 studiów I stopnia Rodzaj zajęć - wykłady i egzamin
-
GEOMETRIA I GRAFIKA INŻYNIERSKA [Niestacjonarne][2020/21]
e-Learning Courses -
Społeczne przesłanki rewitalizacji osiedli mieszkaniowych z okresu XX-lecia międzywojennego.
PublicationCelem niniejszego tekstu jest prezentacja wyników badań socjologicznych przeprowadzonych w związku z badaniami i analizami poświęconymi rewitalizacji osiedli mieszkaniowych Gdańska z okresu XX-lecia międzywojennego. Istotnym argumentem na rzecz odnowy (ożywienia/rewitalizacji) jest czynnik ekonomiczny. Jednakże zagadnienia społeczne stanowią niewymiernie ważny element tych działań, nie tylko w obszarach o wartościach historycznych....
-
Wspólna lokalizacja jako katalizator i inhibitor rozwoju klastrów
PublicationStreszczenie: Głównym problemem badawczym poruszonym w artykule są zalety i wady wspólnej lokalizacji. Celem artykułu był przegląd koncepcji teoretycznych poświęconych konsekwencjom umiejscowienia podmiotów gospodarczych w konkretnych warunkach geograficznych i społecznych. Większość omawianych koncepcji została zaprezentowana w kontekście struktur klastrowych, dla których kwestia zakotwiczenia na określonym obszarze jest jedną...
-
The decay of quantum correlations between quantum dot spin qubits and the characteristics of its magnetic-field dependence
PublicationWe address the question of the role of quantum correlations beyond entanglement in the context of quantum magnetometry. We study the evolution of the rescaled variant of the geometric quantum discord of two electron-spin qubits interacting with an environment of nuclear spins via the hyperfine interaction. We have found that quantum correlations display a strong magnetic-field sensitivity which can be utilized for decoherence-driven...
-
Inexpensive Helical Antenna for Global Navigation Satellite Systems
PublicationZaprezentowane zostały wyniki badań teoretycznych oraz eksperymentalnych niskobudżetowej anteny na pasmo L. Wyjściowa geometria struktury została obliczona na podstawie ogólnych wzorów. Efekt przesunięcia częstotliwości wywołany przez użycie rdzenia PU został również uwzględniony. Równolegle przeprowadzono badania wrażliwości parametrów anteny na proces produkcji. Zaprojektowano i wykonano układ dopasowania impedancyjnego. W paśmie...
-
n-butyl 2-(3-chloro-1,2-dihydropyrazin-2-ylidene)-2-cyanoacetate
PublicationStrukturę C11H12ClN3O2 wyznaczono metodą rentgenowskiej analizy strukturalnej. Geometria i długości wiązań w pierścieniu pirazynowym są typowe dla tej klasy związków. Cała cząsteczka, poza ogonem n-butylowym, jest płaska (r.m.s. 0.0131(1)Å). Występujące intramolekularne wiązanie wodorowe N2-H2BO1 tworzy S(6) pierścień stabilizując całą cząsteczkę. W sieci krystalicznej obserwuje się nieuporządkowanie statyczne dla reszty...
-
(μ2-4,4'-Bipyridyl-κ2N:N')bis[bis(tri-tert-butoxysilanothiolato- κ2S,O)cadmium(II)] tetrahydrofuran disolvate
PublicationW strukturze tytułowego kompleksu znajdują się oddzielne cząsteczki, w których każdy atom kadmu jest koordynowany przez dwa atomy siarki, dwa atomy tlenu i jeden atom azotu. Geometria każdego z atomów kadmu jest pośrednia pomiędzy piramidą o podstawie kwadratu a bipiramidą trygonalną. Dwie jednostki tri-tert-butoksysilanotiolanu kadmu są połączone cząsteczką 4,4'-bipirydylu. Dodaktowo w strukturze kompleksu znajdują się dwie cząsteczki...
-
(2-Ethylimidazole-κN)bis(tri-tert-butoxysilanethiolato-κ2O,S)zinc(II) propan-2-ol solvate
PublicationW publikowanym związku [Zn(C12H27O3SSi)2(C5H8N2)]*C3H8O, atom Zn(II) jest koordynowany przez atom azotu 2-etyloimidazolu, dwa atomy siarki i dwa atomy tlenu pochodzące od reszt tri-tert-butoksysilanotiolanowych, a geometria na atomie cynku(II) jest typu trygonalnej bipiramidy. Grupa hydroksylowa cząsteczki rozpuszczalnika 2-propanolu tworzy dwa wiązania wodorowe typu N-H - O i O-H - S z sąsiednią czasteczkĄ kompleksu, przez co...
-
Shaping of the turnout diverging track with variable curvature sections
PublicationThe paper presents an analytical method of shaping the turnout diverging railroad track with variable curvature segments on its length, which in an evident way distinguished it from a typical solution, made up of a single circular arc with no transition curves. Two separate causes including a linear and a nonlinear curvature one in the form of a polynomial have been examined. The obtained solutions of the problem have a universal...
-
Analysis of sloping brace stiffness influence on stability and load bearing capacity of a truss
PublicationThe paper is focused on the numerical study of stability and load bearing capacity of a truss with side elastic braces. The structure is made in reality. The rotational and sliding brace stiffnesses were taken into account. Linear buckling analysis and non-linear static analysis with geometric and material nonlinearity were performed for the beam and shell model of the truss with respect to the angle of sloping braces. As a result...
-
Stability of an imperfect truss loaded by wind
PublicationThe present paper is devoted to the numerical research of stability of a truss loaded by wind and stiffened by elastic supports located at the top chord. The lateral braces or lateral and torsional braces were taken into account. In this paper, the linear buckling analysis re- sults for the beam and shell model were presented. Two different shapes of initial geometric imperfections were considered in the non-linear static analysis...
-
Geometria Wykreślna na kierunku Transport 2023/2024 (zima)
e-Learning CoursesPrzedmiot o nazwie Geometria Wykreślna dla I sem. studiów stacjonarnych kierunku Transport. Geometria Wykreślna na kierunku Transport 2023/2024 (zima), kurs wspierający przedmiot Geometria Wykreślna, (PG_00044513) przeznaczony dla studentów: Kierunek studiów: Transport Poziom kształcenia: I stopnia - inżynierskie Rok akademicki realizacji przedmiotu: 2023/2024Forma studiów: stacjonarne Rok studiów: 1 Semestr: 1 (zimowy)
-
Geometria Wykreślna na kierunku Transport 2021/2022 (zima)
e-Learning CoursesPrzedmiot o nazwie Geometria Wykreślna dla I sem. studiów stacjonarnych kierunku Transport. Geometria Wykreślna na kierunku Transport 2021/2022 (zima), kurs wspierający przedmiot Geometria Wykreślna, (PG_00044513) przeznaczony dla studentów: Kierunek studiów: Transport Poziom kształcenia: I stopnia - inżynierskie Rok akademicki realizacji przedmiotu: 2021/2022 Forma studiów: stacjonarne Rok studiów: 1 Semestr: 1 (zimowy)
-
The regional energy transformation in the context of renewable energy sources potential
PublicationThe topics addressed in the article concern the problem of exploiting the potential of renewable energy sources (RES) at the regional level and the problem of the course of regional energy transition processes. Throughout the world, energy transition proceeds in a specific way for each country, due to the different potential of the selected RES and political, institutional and socio-economic conditions. Energy transition processes...
-
Robust estimation of deformation from observation differences for free control networks
PublicationDeformation measurements have a repeatable nature. This means that deformation measurements are performed often with the same equipment, methods, geometric conditions and in a similar environment in epochs 1 and 2 (e.g., a fully automated, continuous control measurements). It is, therefore, reasonable to assume that the results of deformation measurements can be distorted by both random errors and by some non-random errors, which...
-
Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review
PublicationThe use of the friction stir welding (FSW) process as a relatively new solid-state welding technology in the aerospace industry has pushed forward several developments in different related aspects of this strategic industry. In terms of the FSW process itself, due to the geometric limitations involved in the conventional FSW process, many variants have been required over time to suit the different types of geometries and structures,...
-
Research project BRIK: development of an innovative method for determining the precise trajectory of a railway vehicle
PublicationIn the paper the essential assumptions regarding a research project implemented by a consortium of Gdansk University of Technology and Gdynia Maritime University are presented. The project has been commissioned by National Center of Research and Development with cooperation with Polish Railways (PKP Polskie Linie Kolejowe S.A.). The project is focused in implementation of modern measurement techniques using Global Navigation Positioning...
-
A New Adaptive Method for the Extraction of Steel Design Structures from an Integrated Point Cloud
PublicationThe continuous and intensive development of measurement technologies for reality modelling with appropriate data processing algorithms is currently being observed. The most popular methods include remote sensing techniques based on reflected-light digital cameras, and on active methods in which the device emits a beam. This research paper presents the process of data integration from terrestrial laser scanning (TLS) and image data...
-
REINFORCED CONCRETE SUPPORTING CONSTRUCTION OF THE STADIUM COVER FOR EURO 2012 IN GDAŃSK
PublicationIn the article structural issues that connected with the reinforced concrete supporting construction of the stadium roofing for EURO 2012 in Gdańsk were described. In the first part of the article the concept of stadium foundation were described. In the second the static - strength analysis for two variants fastening together individual foundation elements were made. The two assumed geometrically different concept of foundation...
-
INNOVATIVE THERMODYNAMICAL CYCLES BASED ON ENHANCEMENT MASS, MOMENTUM, ENTROPY AND ELECTRICITY TRANSPORT DUE TO SLIP, MOBILITY, TRANSPIRATION, ENTROPY AND ELECTRIC JUMPS AS WELL AS OTHER NANO-FLOWS PHENOMENA
PublicationIn our work, a further development of the authors model of thermo-chemical flow of fuel, air, oxygen, steam water, species, ionic and electron currents within nano channels and nano-structures of novel devices is presented. Different transport enhancement models are taken into account -among them the most important are: the velocity slip connected with complex external friction, the Darcy mobility and the Reynolds transpiration....
-
Nonlinear Modeling in Time Domain Numerical Analysis of Stringed Instrument Dynamics
PublicationMusical instruments are very various in terms of sound quality with their timbre shaped by materials and geometry. Materials' impact is commonly treated as dominant one by musicians, while it is unclear whether it is true or not. The research proposed in the study focuses on determining influence of both these factors on sound quality based on their impact on harmonic composition. Numerical approach has been chosen to allowed independent...
-
Postquarter-Point Case of Ship’s Side-Berthing and Its Influence on Marine Fender Pitch
PublicationThis paper presents a critical analysis of some selected codes and practical recommendations used as basic rules in the design procedures of modern marine fender systems. The first part of the discussion pertains to the existing equations used in calculating the eccentricity coefficient in the ship’s kinetic energy equation and the maximum allowable fender pitch (spacing) in a set of fenders installed along a quay wall. A new approach...
-
QRS Morphology-Based EDR Signal—Factors Determining its Properties
PublicationRespiration-induced signals contain a clinically significant information. It could be obtained utilizing both direct and indirect methods. ECG-Derived Respiration (EDR) method is the latter one. However, in this case, two approaches could be distinguished. First one is based on determining changes in the morphology of QRS complexes while the second one is based on the Respiratory Sinus Arrhythmia (RSA) mechanism. The former approach...
-
Mechanical analysis of eccentric defected bilayer graphene sheets considering the van der Waals force
PublicationIn this article, we have tried to simulate nonlinear bending analysis of a double-layered graphene sheet which contains a geometrical imperfection based on an eccentric hole. The first-order shear deformation theory is considered to obtain the governing equations. Also, the nonlinear von Kármán strain field has been assumed in order to obtain large deformations. Whereas the double-layered graphene sheet has been considered, the...
-
The impact of footing conditions of a vertical-axis floating-roof tank on structural shell deformation
PublicationStructural shells of fuel tanks are often subjected to geometric imperfections which may lead to exceeding the ultimate and serviceability limit states. One of the means triggering shell deformation is non-uniform settlement caused by incoherent soil conditions. Analysis carried out in the work concerns of vertical-axis, floating-roof cylindrical shell which volume is 50.000 m3, founded on a complex multi-layered soil. The sensitivity...
-
Acoustical images of the Gulf of Gdansk
PublicationAcoustic images of seabed are of interest to specialists in the field of marine engineering, marine navigation, marine archeology, hydrogeology, etc. New technolo gies based on use of elastic waves, predominantly acoustic waves that allow detecting complexity of geometric forms of seabed, ensure progress in studying the bathymetric structure of seafloor. Use of parametric sources of waves generated...
-
Impact of cross-section centers estimation on the accuracy of the Point cloud spatial expansion using robust M-estimation and Monte Carlo simulation
PublicationThe point cloud spatial expansion (PCSE) method creates an alternative form of representing the shape of symmetrical objects and introduces additional descriptive geometric parameters. An important element of the procedure is determining the course of the axis of symmetry of cylindrical objects based on cross-sections of point clouds. Outliers occurring in laser measurements are of great importance in this case. In this study,...
-
Mountain pass solutions to Euler-Lagrange equations with general anisotropic operator
PublicationUsing the Mountain Pass Theorem we show that the problem \begin{equation*} \begin{cases} \frac{d}{dt}\Lcal_v(t,u(t),\dot u(t))=\Lcal_x(t,u(t),\dot u(t))\quad \text{ for a.e. }t\in[a,b]\\ u(a)=u(b)=0 \end{cases} \end{equation*} has a solution in anisotropic Orlicz-Sobolev space. We consider Lagrangian $\Lcal=F(t,x,v)+V(t,x)+\langle f(t), x\rangle$ with growth conditions determined by anisotropic G-function and some geometric conditions...
-
Uniwersalna metoda projektowania regulacji osi toru z wykorzystaniem pomiarów satelitarnych i optymalizacji
PublicationW pracy zwrócono uwagę na ograniczenia stosowanej w naszym kraju metodyki regulacji osi toru związane w głównym stopniu z uzyskiwaną dokładnością określania istniejącego kształtu toru. Jako rozwiązanie alternatywne wskazano opracowaną przez interdyscyplinarny zespół naukowy Politechniki Gdańskiej i Akademii Marynarki Wojennej / Akademii Morskiej w Gdyni i stosowaną od 2009 roku nowatorską technikę mobilnych pomiarów satelitarnych....
-
Technical fabrics in costruction of large scale roofs - numerical and experimental aspects
PublicationDesigning and construction of textile hanging roofs is the challenging subject for engineers. This type of structure needs geometrically and very often also physically non-linear calculations. Due to different behaviour of two families of threads (warp and weft), which during deformation can change the angle between their directions, they require special constitutive modelling. Also the loading of hanging roofs is very special....
-
Automatic Correction of Non-Anechoic Antenna Measurements using Low-Pass Filters
PublicationPrototype measurements belong to key steps in the development of antenna structures. They are normally performed in expensive facilities, such as anechoic chambers (ACs). Alternatively, antenna performance can be extracted (at a low cost) in non-anechoic conditions upon appropriate post-processing. Unfortunately, existing correction algorithms are difficult to set up and prone to failure, which limits their practical usefulness....