displaying 1000 best results Help
Search results for: curring characteristics
-
Behavior of residual current devices at frequencies up to 50 kHz
PublicationThe use of residual current devices (RCDs) is obligatory in many types of low-voltage circuits. They are devices that ensure protection against electric shock in the case of indirect contact and may ensure additional protection in the case of direct contact. For the latter purpose of protection, only RCDs of a rated residual operating current not exceeding 30 mA are suitable. Unfortunately, modem current-using equipment supplied...
-
Mainstream shortcut N removal modeling current status and perspectives
PublicationThis work gives an overview of the state-of-the-art in modelling of short-cut processes for nitrogen removal in mainstream wastewater treatment and presents future perspectives for directing research efforts in line with the needs of practice. The modelling status for deammonification (i.e., anammox-based) and nitrite-shunt processes is presented with its challenges and limitations. The importance of mathematical models for considering...
-
Sensorless Control of Induction Machine Supplied by Current Source Inverter
PublicationThe paper describes the voltage control technique of induction machines supplied by a current source inverter. The control system is based on proposed new multi-scalar variables, which are named “r.” The control system contains the output filter capacitor's model. In the sensorless control system the Z type backstepping speed observer was applied. The mathematical dependences are confirmed by simulation and experimental research.
-
Specific cutting resistance while sawing of wood - the size effect
PublicationW artykule przedstawiono wyniki analiz zmian właściwego oporu skrawania, przy zastosowaniu współczesnej mechaniki pękania z uwzględnieniem wiązkości. Analizy wykonano dla procesu przecinania drewna na pilarce ramowej PRW15M drewna jesionu i jesionu modyfikowanego termicznie. Zastosowane podejście pozwala na wyjaśnienie zjawiska wzrostu właściwego powierzchniowego oporu skrawania dla niewielkich grubości warstwy skrawanej jako efektu...
-
Remarks on the Subject of Back-Up Protection of Residual Current Devices
PublicationResidual current devices without integral overcurrent protection (RCCBs) are back-up protected by fuses or miniature circuit-breakers (MCBs). If the latter are used, special attention must be given to the coordination between an RCCB and an MCB. This paper indicates probable cases of the aforementioned devices coordination, in which back-up protection of the RCCB is not adequate. A laboratory test has shown that depending on the...
-
Time-current tripping curves of arc fault detection devices
PublicationTripping curves of arc fault detection devices, in accordance with PN-EN 62606 “General requirements for arc fault detection devices” have been presented in the paper. Consequently the most fundamental differences in arc fault detection devices tripping compared to circuit-breakers and residual current devices have been indicated.
-
Analysis and evaluation of grouping methods for effective cutting tool operation
PublicationThis article presents the possibilities for using cluster analysis in the assignment of machine tools in automated manufacturing systems. Based on the similarity of manufacturing processes in the system, cutting tools have been grouped. The objective was to obtain groups of similar objects, which could potentially ensure the reduction of the frequency and time of setups, optimizing the maintenance of tool resources and improving...
-
Modal analysis of railway current collectors using Autodesk Inventor
PublicationThe paper presents the results of modal analysis of railway current collector type 160EC. In the first place, the analysis was carried out analytically for a simplified two lumped mass pantograph model. Then numerical analysis was conducted in the Autodesk Inventor (AI) on the prepared multibody model using the AI modal analysis algorithm, which is based on the finite element method (FEM). Model elements which are most relevant...
-
Determining the leakage current resistive component by the orthogonal vector method
PublicationThe measurement of the metal – oxide surge arresters (MOSA) leakage current and the analysis of its components is a key diagnostic criterion according to technical standards. During on site MOSA condition assessment, the easy way is based on the measurement only leakage current, without the inconvenient live working measurements of supply voltage. Orthogonal vectors method of determination the resistive leakage current is presented....
-
Case Study of Stray Current Corrosion of Tall Ship Mast
PublicationNowadays, in the present technical civilization there are numerous complex technical systems that may generate various hazards. Large transport units like ships can be considered as the most dangerous systems. Therefore, it is important to eliminate all possible hazards, especially for ship crewmembers. Destruction of ship structural components caused by vast corrosion is one of these hazards. Usually, its activity leads to a decrease...
-
Determination of Local Corrosion Current from Individual Harmonic Components
PublicationHarmonic analysis has been used in corrosion measurements for several decades. During this period the method has been refined and developed. Nevertheless, the technique has not been applied to properties determination in local scale yet. This paper is focused on local corrosion current measurements based on harmonic analysis. For this purpose, a non-linear nature of electrode processes is used and measured in local scale applying...
-
Errors of a Linear Current Approximation in High-Speed PMSM Drives
PublicationCurrent sampling techniques and predictive algorithms used in the digital control of electric drives rely on a simple mathematical model that assumes linear current changes upon constant supplying voltages. This paper identifies rotor movement as a factor that makes this assumption invalid when the rotor covers an angular distance of a few tens of degrees during the control interval duration. The errors of the linear current approximation...
-
The original method of cutting power forecasting while wood sawing
PublicationEfekty energetyczne procesu przecinania drewna piłami (siły skrawania i moc skrawania) przy klasycznym podejściu do zagadnienia są określane na podstawie wartości właściwego powierzchniowego oporu skrawania. Z drugiej strony siły skrawania można rozważać z punktu widzenia współczesnej mechaniki pękania. Prognozowanie wartości kąta ścinania z zastosowaniem modeli uwzględniających wiązkość materiału obrabianego, ścinanie w płaszczyźnie...
-
Security of Cryptocurrencies: A View on the State-of-the-Art Research and Current Developments
Publication[Context] The goal of security is to protect digital assets, devices, and services from being disrupted, exploited or stolen by unauthorized users. It is also about having reliable information available at the right time. [Motivation] Since the inception in 2009 of the first cryptocurrency, few studies have been undertaken to analyze and review the state-of-the-art research and current developments with respect to the security...
-
Electrical responses of nanostructured ZrS3 as field-effect transistor for nitrogen dioxide, ethanol, and acetone detection enhanced by visible light
Open Research DataSmall-area layers of nanostructured ZrS3 were fabricated and measured in the field-effect transistor configuration. Irradiation with visible light enabled generating photocurrent and increasing the sensitivity to selected ambient gases: nitrogen dioxide, ethanol, and acetone. The data set consists of electrical responses (current vs. voltage characteristics...
-
Reactive Sintering of Ground Tire Rubber (GTR) Modified by a Trans-Polyoctenamer Rubber and Curing Additives
PublicationThe proposed method of ground tire rubber (GTR) utilization involves the application of trans-polyoctenamer rubber (TOR), a commercially available waste rubber modifier. The idea was to investigate the influence of various curing additives (sulfur, N-cyclohexyl-2-benzothiazole sulfenamide (CBS), dibenzothiazole disulfide (MBTS) and di-(2-ethyl)hexylphosphorylpolysulfide (SDT)) on curing characteristics, physico-mechanical, thermal,...
-
GTR/NBR/Silica Composites Performance Properties as a Function of Curing System: Sulfur versus Peroxides
PublicationIn this work, conventional sulfur and two types of organic peroxides (dicumyl peroxide (DCP) and di-(2-tert-butyl-peroxyisopropyl)-benzene (BIB)) curing systems were used to investigate the possibility for tailoring of the performance properties of GTR/NBR blends reinforced with a variable content of highly dispersive silica (0–30 phr). The curing characteristics, static mechanical and acoustical properties, swelling behavior,...
-
Curing epoxy with ethylenediaminetetraacetic acid (EDTA) surface-functionalized Co Fe3-O4 magnetic nanoparticles
PublicationIn this work, the bulk and surface composition of Fe3O4 supermagnetic nanoparticles were modified for efficient epoxy curing. The bare, ethylenediaminetetraacetic acid (EDTA) capped, and cobalt (Co)-doped EDTA capped Fe3O4 nanoparticles were synthesized electrochemically. The crystalline structure and phase information, surface capping, morphology and magnetization behavior of nanoparticles were studied by X-Ray diffraction (XRD),...
-
Cure Index demonstrates curing of epoxy composites containing silica nanoparticles of variable morphology and porosity
PublicationAn image was taken by Cure Index on curability of epoxy with silica nanoparticles having variable morphology and porosity. Three kinds of silica nanoparticles with non-porous curved-rod, non-porous spherical, and mesoporous spherical microstructures were synthesized and characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy (SEM) and Brunauer–Emmett–Teller analyses. Epoxy nanocomposites containing...
-
Fuel, Oils and Greases, W, E, sem.01, zimowy 22/23
e-Learning CoursesDivision and origin of fuels. Fossil energy resources in Poland and in the world. Production and structure of fuel consumption. Main directions of crude oil processing. Classification and physical properties of gaseous and liquid fuels - natural gas, gasoline, kerosene, diesel oil, heating oil. Classification and characteristic indicators of solid fuels - hard coal, lignite, peat. Fuel contaminants and methods of their removal....
-
Current Vascular Pharmacology
Journals -
R&D of satellite pumps and motors with small geometrical displacement supplied with oil and non-flammable liquids
PublicationThe newest construction of satellite motors and self-suction satellite pumps with small geometrical displacement have been described in this article. The characteristics of volumetric and total efficiency of one satellite motor, selected from the series, supplied with oil have been presented. These characteristics have been compared with the orbital motors' characteristics. The remaining specifications of these motors were also...
-
Beata Krawczyk-Bryłka dr
PeoplePsycholog, doktor nauk humanistycznych w dziedzinie zarządzania, adiunkt w Katedrze przedsiębiorczości. 2018 - 2021: Kierownik projektu NCN: „Efektuacyjny model zespołu przedsiębiorczego. Jak działają przedsiębiorcze zespoły odnoszące sukces" od 2016: Quality Standards Lead filaru People management & personal development na studiach MBA Politechniki Gdańskiej 2008 – 2012: Prodziekan ds kształcenia Wzydziału Zarządzania i Ekonomii...
-
Motion stability during optimal control of the mobile platform
PublicationPraca przedstawia metodę badania stabilności robotów mobilnych podczas sterowania optymalnego na przykładzie 3-kołowej platformy mobilnej. Robot posiada więzy nieholonomiczne. Model matematyczny 3-kołowej platformy mobilnej opisuje skończona liczba nieliniowych równań różniczkowych. Stąd, prognozowanie stabilności ruchu takiego obiektu wymaga zastosowania efektywnych algorytmów.
-
Heart laceration during oesophagectomy for the treatment of oesophageal carcinoma
Publication -
Manure heaps attract farmland birds during winter
Publication -
The management of hematologic malignancies during the COVID-19 pandemic
Publication -
Comparison of Macintosh and Miller laryngoscopes during pediatric resuscitation
Publication -
Thermal Sensations of Surgeons During Work in Surgical Gowns
Publication -
Patients’ Expectations as to Doctors’ Behaviors During Appointed Visits
Publication -
Volunteering in palliative care during COVID-19 pandemic
Publication -
Odour Samples Degradation During Detention in Tedlar® Bags
Publication -
Conformational changes of peptidoglycan fragments during their interactions with vancomycin
Publication -
Kinetics and mechanism of the chemically modified starches during gelatinization.
PublicationNative starch was silicated by means of microwave-assisted reactions with varying doses of reagents. Resulting products were characterized by DSC and HMR-relaxation methods. It was observed that the hydratation of the silicated starches during gelatinization decreases when compared to that of the native potato starch. The amount of unfrozen water for ungelitinizated silicated starches are less than in control samples. At the same...
-
Carbon dioxide sequestration during shale gas recovery
PublicationThis paper presents literature on theoretical and practical aspects of gas production from shale using carbon dioxide fracturing. Development of technical and environmental aspects of carbon dioxide fracturing technologies is also considered. Patents applicable to carbon dioxide fracturing are reviewed. There were also conducted researches to evaluate possibility of carbon dioxide sequestration in shale gas reservoirs.
-
Functionalization of Parylene During Its Chemical Vapor Deposition
PublicationTwo possible mechanisms for the reaction of four halogenated (metha)acrylate-based molecules with Parylene [poly (paraxylylene)] during its chemical vapor deposition were proposed. The chemical reactivity of acrylate double bond with the paraxylylene biradical was calculated for all four (metha)acrylate-based molecules. These calculations allowed the evaluation of the energetically favorable mechanism and indeed a direct correlation...
-
Entrance and exit conditions of teeth during circular sawing.
PublicationW pracy przedstawiono analizę rozkładu czasowego i przestrzennego geometrycznych warunków wejścia i wyjścia ostrzy piły przy przecinaniu piłami tarczowymi.
-
Determination of toluene formed during fermentation of sewage sludge
PublicationW pracy przedstawiono wyniki oznaczeń toluenu w próbkach osadów ściekowych przy wykorzystaniu techniki wypłukiwania i jednoczesnego wychwytywania analitów (PT). Badania procesu feremntacji osadów ściekowych doprowadziły do stwierdzenia, że w trakcie tego procesu powstaje toluen. Stwierdzono wzrost stężenia toluenu od poziomu 3 mg/l do ponad 24 mg/l dla próbek osadów ściekowych z Oczyszczalni Gdańsk -Wschód oraz od poziomu 0,6 mg/l...
-
Lessons learned during SRAD hybrid motor development
PublicationStudent Researched and Developed (SRAD) hybrid rocket motor H-15 with total impulse of 15 $kNs$ was built. First version of the engine has average thrust of 3 $kN$, the second, improved one is prepared with an aim to have average thrust of 5 $kN$. Engine development was started from scratch and went through phases of: definition of design assumptions and constraints, numerical modelling to predict engine performance, CAD and CAM...
-
Building damage due to structural pounding during earthquakes
PublicationEarthquake-induced pounding between adjacent buildings has been identified as one of the reasons for substantial damage or even total collapse of colliding structures. A major reason leading to interactions in buildings results from the differences in their dynamic parameters and also from insufficient distance between the structures. Although the research on structural pounding has been much advanced, the studies have mainly been...
-
Air trapping problem during infiltration on the large areas
PublicationThe process of flow modeling in unsaturated porous medium is often found in many fields of sciences: geology, fluid mechanics, thermodynamics, microbiology or chemistry. Problem is relatively complicated due to complexity of the system which contains three phases: water, air and soil skeleton. The flow of water in such a medium can be described using two-phase (2PH) flow formulation, which accounts the inflow of air and water phases,...
-
A novel sensor for measuring temperature profile during the thermoablation
PublicationAbstract — A novel approach for monitoring a temperature distribution inside a tissue during thermoablation is presented in the paper. A thermal profile is measured using a set of serially connected thermistors each bypassed by a capacitor. This technique allows a two-wire and simultaneous multi- point measurements using a multi-frequency measurement of electrical impedance. It is...
-
Searching for Critical Conditions During Lifeboat Launching – Simulations
PublicationThe article describes numerical simulations of the process of lifeboat launching at the ship’s side. The research is aimed at finding the values of ship motion parameters which appear to be most dangerous for people in the lowered lifeboat due to the generated accelerations. The simplified model of ship hull motion adopted at this research stage bases on a superposition of harmonic motions with given amplitudes and periods in six...
-
Evaluation of Pavement Temperatures in Poland During Winter Conditions
PublicationThe paper presents the analysis of pavement temperatures from meteorological stations located at the Polish national roads during the impact of low winter temperatures. Presented issue is particularly important in view of the problem of low-temperature cracks that occur in the asphalt pavement under the influence of low temperatures. For each location of meteorological station there were analysed measurements of the temperature...
-
Determining the conditions for temperature measurements during flat lapping
PublicationPrzedstawiono pomiary temperatury układu wykonawczego docierarki jednotarczowej ABRALAP 380. Badano wpływ liczby stosowanych pierścieni prowadzących przy docieraniu elementów ceramicznych mikroziarnami węglika krzemu. Analizowano przyrost temperatury układu w czasie do trzech godzin. W badaniach zastosowano kamerę termowizyjną V-20II firmy VIGO System S.A.
-
Liquid-solid interaction during formation of nanocomposite systems
PublicationW pracy zaprezentowano wyniki badań nad zmianami strukturalnymi w układach ciekłego Bi i małych cząsteczek Ni lub Cu w zakresie temperatur od 615 do 1145K. Zaobserwowano (SEM) mikrostruktury kompozytowe i przeanalizowano dla różnych temperaturach i różnych czasów mieszania. Strukturę układów Bi-Ni oraz Bi-Cu, zarówno w stanie stałym i ciekłym, zbadano za pomocą dyfrakcji rentgenowskich.
-
Nitrogen transformation during fermentation in agricultural biogas plants
PublicationThe aim of the present study was to determine changes in the organic nitrogen fraction in the liquid fraction of the digestate during laboratory tests of mono- and co-digestion. Three agricultural wastes were tested: distillery residue, cattle slurry and corn silage. In the mono-fermentation tests, the initial total nitrogen concentration depended on the feedstock used. As a result of the hydrolysis and ammonification of the organic...
-
Reduction of dynamic effects during granular flow in silos
PublicationOmówiono kilka efektywnych sposobów redukcji nadmiernych dynamicznych efektów występujących w przepływie silosowym w silosach modelowych. Sposoby te mogą być wykorzystane w praktyce silosowej.
-
CURRENT MEDICAL RESEARCH AND OPINION
Journals -
CURRENT OPINION IN PLANT BIOLOGY
Journals