Wyniki wyszukiwania dla: NUMERICAL STUDY
-
Effectiveness of a mathematical model in simulating nonlinear mechanical behaviour of a seismic isolation system made of polymeric bearings
PublikacjaThe present study was focused on determining the effectives of a nonlinear mathematical model in simulating complex mechanical behaviour of a seismic isolation system made of Polymeric Bearings. The proposed mathematical model defines the lateral force as a nonlinear function of the shear displacement and the deformation velocity. The effectiveness of the proposed mathematical model was verified by comparing the seismic response...
-
Large deformation modelling of CPT probing in soft soil—pore water pressure analysis
PublikacjaThis paper presents the results of finite element modelling with Updated Lagrangian formulation of the Cone Penetration Test in soft soil deposit located in Jazowa, Poland. The numerical calculations are carried out for homogenous, normally consolidated, organic soil layer. The Modified Cam Clay constitutive model for soft soil and Coulomb model for interface are used. The study compares the registered pore water pressure distributions...
-
Mathematical model of pennate muscle
PublikacjaThe purpose of this study is to create a new mathematical model of pennate striated skeletal muscle. This new model describes behaviour of isolated flat pennate muscle in two dimensions (2D) by taking into account that rheological properties of muscle fibres depend on their planar arrangement. A new mathematical model is implemented in two types: 1) numerical model of unipennate muscle (unipennate model); 2) numerical model of...
-
Experimental and numerical studies of double corrugated steel arch panels
Publikacja -
Numerical modeling of force and contact networks in fragmented sea ice
Publikacja -
Numerical modelling of thermodynamics and dynamics of sea ice in the Baltic Sea
Publikacja -
Numerical Algorithms of Planning Safe Ship Trajectories for ARPA Systems
PublikacjaGłównym celem pracy było zaprojektowanie metody znajdowania bezpiecznych trajektorii statków, która byłaby prosta w implementacji, szybka (niska złożoność obliczeniowa)i deterministyczna, elastyczna (umożliwiałaby zastosowanie dowolnej domeny). Aby zrealizować cel należało zbadać bieżący stan wiedzy w dziedzinie,zaprojektować nową metodę, zaimplementować metodę (wraz ze wszystkimi niezbędnymi algorytmami) w środowisku programistycznym...
-
Numerical analysis of laminated shells under in-plane axial compression
PublikacjaW pracy analizowana jest stateczność powłoki warstwowej poddanej osiowemu ściskaniu. Badany jest wpływ wariantów uwarstwienia oraz warunków podparcia krawędzi obciążonej na zachowanie konstrukcji. Wyniki numeryczne porównano z eksperymentem.
-
Numerical assessment of maneuvering properties of ship with a conventional type of propulsion
Publikacja -
A COMPUTATIONAL ALGORITHM FOR THE NUMERICAL SOLUTION OF NONLINEAR FRACTIONAL INTEGRAL EQUATIONS
Publikacja -
On convergence and stability of a numerical scheme of Coupled Nonlinear Schrödinger Equations
PublikacjaRozważamy rozwiązania numeryczne układu sprężynowych równań nieliniowych Schrödingera. Udowodniliśmy stabilność i zbieżność. Testujemy za pomocą rozwiązań solitonowych.
-
Numerical algorithms of planning safe ship trajectories for ARPA systems
PublikacjaTeza rozprawy: ''Połączenie odpowiedniej miary ryzyka kolizji obiektów i metody unikania kolizji za pomocą manewru niezbędnego pozwala na opracowanie szybkiej, efektywnej i prostej w implementacji metody planowania bezpiecznych trajektorii statków dla systemów ARPA, uwzględniającej dowolną zadaną domenę obiektu. Dobór kształtu domeny obiektu ma znaczny wpływ na zgodność wynikowej trajektorii z regułami MPDM. Minimalizacja liczby...
-
Numerical approximations of parabolic functional differential equations on unbounded domains
PublikacjaSkonstruowano schematy różnicowe zagadnień początkowych dla nieliniowych parabolicznych równań różniczkowo funkcyjnych. Przedstawiono twierdzenie o oszacowaniu błędu rozwiązań przybliżonych dla równań różnicowo funkcyjnych typu Volterry z niewiadomą funkcją kilku zmiennych. Udowodniono twierdzenie o zbieżności jawnych schematów różnicowych. Podano przykłady numeryczne.
-
Numerical heat transfer model in skin burn depth simulations
PublikacjaW artykule przedstawiono numeryczny model wymiany ciepła zachodzącej w tkance skórnej . Wyniki symulacji na modelu zostały porównane z wynikami pomiarów In vivo na zwierzętach.
-
Numerical analysis of the finite amplitude plane wave propagation problem
PublikacjaRozważano zagadnienie propagacji fali płaskiej o skończonej amplitudzie w środowisku wodnym. Przedstawiono model matematyczny i przykładowe wyniki obliczeń numerycznych. Model matematyczny zbudowano w oparciu o równanie akustyki nieliniowej. Do rozwiązania zagadnienia zastosowano metodę różnic skończonych. Badano wpływ wartości parametrów numerycznych na dokładność obliczeń oraz analizowano wpływ wartości parametrów fizycznych...
-
Discussion. Numerical analysis of thin-walled frames with flexible joints
PublikacjaPrzedstwiono uwagi do artkułu Tews R., Rachowicz W. ''Numerical Analysis of Thin-Walled Frames with Flexible Joints'', Archives of Civil Engineering, 51, 3, 2005, ss. 344-369.
-
Numerical Simulation of Operating Parameters of the Ground Source Heat Pump
Publikacja -
Numerical modelling of conical wave formation in multimode optical fibers
Publikacja -
Numerical Analysis of Flow in Building Arrangement: Computational Domain Discretization
Publikacja -
NUMERICAL MODELLING AND EXPERIMENTATION OF HISTORICAL CARPENTRY CORNER LOG JOINTS
PublikacjaThe main purpose of this research is to determine the stress distributions on the contact surfaces between the logs of the historical carpentry corner joints. The additional purpose is to compare the stress distribution for four different boundary conditions in the case of dry and wet pine wood. The paper presents the results of numerical analysis of the shortcorner dovetail connection and the saddle notch corner joint, which are...
-
Multimode systems of nonlinear equations: derivation, integrability, and numerical solutions
PublikacjaWe consider the propagation of electromagnetic pulses in isotropic media taking a third-order nonlinearityinto account. We develop a method for transforming Maxwell's equations based on a complete set ofprojection operators corresponding to wave-dispersion branches (in a waveguide or in matter) with thepropagation direction taken into account. The most important result of applying the method is a systemof equations describing the...
-
Numerical Simulation of Open Channel Flow between Bridge Piers
PublikacjaPrzedstawiono dwuwymiarowy model przepływu wody płytkiej, który wykorzystano do symulacji przepływu wody w kanale otwartym w rejonie przekroju mostowego. Równania przepływu rozwiązano metodą objętości skończonych. Wyniki symulacji ruchu wody pomiędzy filarami mostowymi porównano z pomiarami laboratoryjnymi przeprowadzonymi w Laboratorium Hydrauliki i Inżynierii Środowiska politechniki Gdańskiej. Zgodność uzyskanych wyników obliczeń...
-
NUMERICAL MODEL OF PLASTIC DESTRUCTION OF THICK STEEL STRUCTURAL ELEMENTS
PublikacjaIn the shipbuilding industry, the risk of brittle fracture of the structure is limited by using certified materials with specified impact strength, determined by the Charpy method (for a given design temperature) and by supervising the welding processes (technology qualification, production supervision, non-destructive testing). For off-shore constructions, classical shipbuilding requirements may not be sufficient. Therefore, the...
-
Numerical assessment of ultimate strength of severe corroded stiffened plates
PublikacjaThe objective of this work is to investigate numerically (using the non-linear FEM and the approach stipulated by the Common Structural Rules) the severe nonuniform corrosion degradation effect on the ultimate strength of stiffened plates and compare the results to the already published experimental works. Different factors governing structural behavior of corroded stiffened plates are investigated, such as corrosion degradation level,...
-
Comparative analysis of different numerical models of a steel radial gate
PublikacjaHydrotechnical structures are important components in water management system and general flooding safety. Their reliability should be ensured since potential damage might lead to catastrophic consequences. Weir gates are considered to be highly vulnerable elements of each hydro power plant, with regard to its dynamic resistance. The aim of the paper is to compare different numerical models and their influence on the results of...
-
Seafloor backscattering: numerical simulation vs. filter theory approach.
PublikacjaPrzedstawiono model opisujący rozpraszanie sygnału akustycznego na nierównomiernej, regularnie sfalowanej powierzchni dna morskiego jako filtr liniowy z odpowiedzią impulsową o zmieniającej się w czasie chwilowej dominującej częstotliwości. Porównano przewidywania modelu z wynikami otrzymanymi w wyniku złożonych obliczeniowo symulacji numerycznych opartych na fizycznym modelu zjawiska wykorzystującym aproksymację Kirchhoffa. Wstępnie...
-
Application of the numerical-analytic method for systems of differential equations with parameter
PublikacjaThe numerical-analytic method is applied to systems of differential equations with parameter under the assumption that the corresponding functions satisfy the Lipschitz conditions in matrix notation. We also obtain several existence results for problems with deviations of an argument
-
Selected numerical aspects of non linear analysis on E3xSO(3).
PublikacjaPraca ma charakter przeglądowy. Dotyczy numerycznych aspektów nieliniowej analizy układów sformułowanych w ramach teorii sześcioparametrowej. Rozważania dotyczą statyki i dynamiki rozważanych układów oraz specjalnych technik numerycznych stosowanych do ich analizy. Praca zawiera przykłady numeryczne.
-
Numerical prediction of steady and unsteady tip vortex cavitation on hydrofoils
PublikacjaArtykuł przedstawia metodę numeryczną do wyznaczania kawitujących wirów wierzchołkowych powstających za płatami nośnymi. Metoda ta jest oparta na rozwiązywanie dwufazowego turbulentnego przepływu cieczy lepkiej. Pozwala ona wyznaczyć geometrię kawitującego wiru dla różnych geometrii płata nośnego i dla różnych parametrów przepływu. Pokazano porównanie wyników obliczeń z pomiarami i rejestracjami wykonanymi na modelu płata w tunelu...
-
Numerical analysis of the carpentry joints applied in the traditional wooden structures
PublikacjaThe paper concerns the numerical analysis of the carpentry joints made from spruce wood. The material parameters of the wood have been calculated on the basis of nine independent material constants (an orthotropic material). The contact zone between the individual elements of the connection has been determined using Contact Tables in the MSC.Marc software. Five types of carpentry joints have been analyzed. The main aim of the research...
-
Numerical analysis and in situ tests of the Grot Rowecki Bridge in Warsaw
PublikacjaThe paper presents the FEM analysis of the reconstructed the Grot-Rowecki Bridge over Vistula river in Warsaw. The bridge has seven spans and consists of two independent structures with the longest spans of 120 m. After reconstruction the bridge is over 10 m wider. The numerical, nonlinear analysis has been con-ducted on a global and local FEM models. These models are defined so as they strictly comply with global structural bridge...
-
Experimental and numerical investigations for GPR evaluation of reinforced concrete footbridge
PublikacjaThe GPR method has increasingly found application in non-destructive testing of reinforced concrete structures. This paper presents the new approach of modelling of the electromagnetic wave propagation for reinforced concrete structures with a complex system of the reinforcement. Simulations of the GPR field were performed on a three-dimensional model of a footbridge using the FDTD method. Numerical maps were compared with results...
-
Monitoring of concrete curing in extradosed bridge supported by numerical simulation
PublikacjaThe paper describes a mathematical model of concrete curing taking into account kinetics of setting reactions. The numerical model is implemented in the author’s program that was used to monitor thermal effects recorded in the concrete bottom plate of the extradosed bridge. Numerical approach was verified by experimental measurements and used for assessment of the current compressive strength due to degree of hydration of fresh...
-
Numerical modelling of elasto-viscoplastic Bodner-Partom constitutive equations
PublikacjaArtykuł omawia wykorzystanie specjalnej procedury UVSCPL umożliwiającej wprowadzenie do komercyjnego programu MSC.Marc sprężysto-lepkoplastycznych równań modelu Bodnera-Partoma. Prezentuje szereg przykładów statycznych i dynamicznych, które potwierdzają poprawność zaproponowanej koncepcji analizy konstrukcji z wykorzystaniem rozpatrywanego prawa Bodnera-Partoma.
-
Some aspects of physical and numerical modeling of water hammer in pipelines
PublikacjaCharakterystyki ciśnieniowe otrzymywane w wyniku symulacji numerycznych uderzenia hydraulicznego różnią się zasadniczo od charakterystyk obserwowanych na drodze doświadczalnej. Stosowane zabiegi matematyczne i numeryczne pozwalające na poprawę zgodności między obliczeniami a pomiarami okazują się skuteczne tylko w przypadku prostych rurociągów o stałej średnicy. Dla bardziej skomplikowanych przypadków prawidłowe odwzorowanie zjawiska...
-
The numerical simulation of two-dimensional vertical incompressible viscous flow
PublikacjaW artykule przedstawiono numeryczne symulacje płaskiego pionowego przepływu nieściśliwej cieczy lepkiej ze swobodną powierzchnią. Zastosowano model bazujący na rozwiązaniu równań Naviera-Stokesa metodą "ciśnień" (SIMPLE). Przy takim podejściu otrzymano dywergencję równań Naviera-Stokesa oraz równanie Poissona na ciśnienie. W rozwiązaniu zastosowano schemat Laxa-Wendroffa z przesuniętą siatką Eulera. Takie podejście zapewnia dokładność...
-
Numerical method of bicharacteristics for quasilinear hyperbolic functional differential systems
PublikacjaPraca dotyczy numerycznej aproksymacji rozwiązań zagadnień początkowo brzegowych dla układów quasiliniowych równań różniczkowo funkcyjnych pierwszego rzędu. Stosuje się metodę różnicową typu Eulera. Siatka otrzymywana jest za pomocą numerycznego rozwiązywania równań różniczkowo funkcyjnych bicharakterystyk.Stabilność schematu różnicowego jest dowodzona metodą porównawczą. O danych funkcjach zakłada się, że spełniają nieliniowe...
-
Fast numerical analysis of dielectric resonators with perturbed rotational symmetry
PublikacjaW artykule zaprezentowano metody szybkiej analizy rezonatorow o symetrii zblizonej do osiowej metodą różnic skończonych w dziedzinie częstotliwości. Dzięki użyciu techniki rozwinęć funkcyjnych w jednorodnych obszarach uzyskano redukcję rozmiaru i znaczne przyspieszenie zbieżności problemu własnego, reprezentującegowspomniane układy. Dzięki elastycznemu sposobowi łączenia dziedzin z i bez rozwinięć funkcyjnych możliwe było zaadaptowanie...
-
Theoretical and numerical analysis of free vibration of liquid-filled tanks
PublikacjaW pracy rozpatrywano drgania giętne belki o stałym przekroju prostokątnym wypełnionej cieczą idealną. Częstości drgań własnych i formy drgań belki wyznacza się z nieskończonych układów równań algebraicznych (30) i (54). Rozwiązania przedstawiono na wykresach.
-
Numerical solution of fractional neutron point kinetics in nuclear reactor
PublikacjaThis paper presents results concerning solutions of the fractional neutron point kinetics model for a nuclear reactor. Proposed model consists of a bilinear system of fractional and ordinary differential equations. Three methods to solve the model are presented and compared. The first one entails application of discrete Grünwald-Letnikov definition of the fractional derivative in the model. Second involves building an analog scheme...
-
Design and numerical testing of 5-box gfrp shell footbridge
PublikacjaThe paper formulates new design conditions for composite footbridges, taking into account the material and structural specificity of these objects, i.e. the strength condition, the serviceability condition and the frequency condition. A GFRP composite footbridge labelled with CFB2 code has been designed, with the original superstructure in the form of an opened-closed 5-box girder. The foot and cycle track bridge is simply supported,...
-
Numerical modelling of 3D printout using line (1D) elements
PublikacjaA proposition of some numerical modelling of the 3D printout is presented in the paper. The proposed model is composed of some 1D elements. The resulting numerical model of the infill consist of beam, spring and rigid elements. Obtained results confirm correctness of the proposed modelling method. Two methods of estimation of the spring parameters are proposed in the paper. In the first method, mechanical properties of the connecting...
-
Numerical Modelling of Connections Between Stones in Foundations of Historical Buildings
PublikacjaThe aim of this paper is to analyse the behaviour of old building foundations composed of stones (the main load-bearing elements) and mortar, based on numerical analysis. Some basic aspects of historical foundations are briefly discussed, with an emphasis on their development, techniques, and material. The behaviour of a foundation subjected to the loads transmitted from the upper parts of the structure is described...
-
Numerical simulation of asphalt mixtures fracture using continuum models
PublikacjaThe paper considers numerical models of fracture processes of semi-circular asphalt mixture specimens subjected to three-point bending. Parameter calibration of the asphalt mixture constitutive models requires advanced, complex experimental test procedures. The highly non-homogeneous material is numerically modelled by a quasicontinuum model. The computational parameters are averaged data of the components, i.e. asphalt, aggregate...
-
Experimental and numerical identification of separation zones in the cent-rifugal compressor
PublikacjaW pracy przedstawiono analizę przepływu w obszarze koła wirnikowego oraz dyfuzora bezłopatkowego sprężarki powietrza. Wyniki obliczeń w ramach modelu 3D (FLUENT 5.5) porównano z wynikami badań laboratoryjnych na stanowisku sprężarkowym Katedry Sprężarek w Sankt Petersburgu. Celem porównania jest ocena możliwości identyfikacji stref przepływu z oderwaniem, w ramach modeli dostępnych w wykorzystanym programie obliczeniowym. W wyniku...
-
Expedited antenna optimization with numerical derivatives and gradient change tracking
PublikacjaDesign automation has been playing an increasing role in the development of novel antenna structures for various applications. One of its aspects is electromagnetic (EM)-driven design closure, typically applied upon establishing the antenna topology, and aiming at adjustment of geometry parameters to boost the performance figures as much as possible. Parametric optimization is often realized using local methods given usually reasonable...
-
A numerical analysis of the thermal effects in the jet impingement stagnation zone
PublikacjaMost of the flows occurring in the engineering systems are turbulent and their accurate numerical analysis is still challenging, especially when combined with the heat transfer. One of the methods of heat transfer enhancement is utilization of the turbulent impinging jets, which were recently applied also in the heat exchangers. Their positive impact on the heat transfer performance was proven, but many questions related to its...
-
The role of numerical tests in assessing road restraint system functionality
PublikacjaKey to understanding the needs and building road infrastructure management tools to prevent and mitigate run-off-road accidents is to identify hazards and their sources which are a result of wrong design, construction, and installation of road restraint systems. Building such tools requires advanced studies with field tests, simulations and models to demonstrate the effects of selected parameters on road user safety. The research...
-
Numerical analysis of high temperature minichannels heat exchanger performance
PublikacjaNowadays, the most difficult technological challenge in energy sector is connected with the gas micro-CHP units, dedicated to the distributed power generation. They are expected to be of high efficiency and at the same time of compact in size. Regarding the first reason, significant increase in microturbine efficiency can only be achieved by increase in the engine operating temperature. Therefore, one of the critical elements in...
-
Numerical analysis of the ostiomeatal complex aeration using the CFD method
PublikacjaWe aimed to analyse ostiomeatal complex (OMC) aeration using the computational fluid dynamics (CFD) method of simulation based on human craniofacial computed tomography (CT) scans. The analysis was based on CT images of 2 patients: one with normal nose anatomy and one with nasal septal deviation (NSD). The Reynolds-Average Simulation approach and turbulence model based on linear eddy viscosity supplemented with the two-equation...