Filters
total: 840
filtered: 760
Search results for: microwave bandpass filters
-
Developments in Green Chromatography
PublicationGreen analytical chemistry is a widely recognized concept that has led to the development of new analytical methods with reduced environmental impact and minimized analyst occupational exposure. Achievements include the development of microextraction, ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE) techniques. Research towards greener separation processes focuses on the elimination of toxic solvents...
-
Application of thin diamond films in low-coherence fiber-optic Fabry Pérot displacement sensor
PublicationThe novel fiber-optic low coherence sensor with thin diamond films is demonstrated. The undoped and boron-doped diamond films were elaborated by the use of the microwave plasma enhanced chemical vapor deposition (μPE CVD) system. The optical signal from the Fabry–Pérot cavity made with the application of those thin films is sensitive to displacement. The sensor characterization was made in the range of 0–600 μm. The measurements...
-
Doped Nanocrystalline Diamond Films as Reflective Layers for Fiber-Optic Sensors of Refractive Index of Liquids
PublicationThis paper reports the application of doped nanocrystalline diamond (NCD) films—nitrogen-doped NCD and boron-doped NCD—as reflective surfaces in an interferometric sensor of refractive index dedicated to the measurements of liquids. The sensor is constructed as a Fabry–Pérot interferometer, working in the reflective mode. The diamond films were deposited on silicon substrates by a microwave plasma enhanced chemical vapor deposition...
-
Nitrogen-Doped Diamond Film for Optical Investigation of Hemoglobin Concentration
PublicationIn this work we present the fabrication and characterization of a diamond film which can be utilized in the construction of optical sensors for the investigation of biological samples. We produced a nitrogen-doped diamond (NDD) film using a microwave plasma enhanced chemical vapor deposition (MWPECVD) system. The NDD film was investigated with the use of scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman...
-
Diamond Structures for Tuning of the Finesse Coefficient of Photonic Devices
PublicationFinesse coefficient is one of the most important parameters describing the properties of a resonant cavity. In this research, a mathematical investigation of the application of diamond structures in a fiber-optic Fabry–Perot measurement head to assess their impact on the finesse coefficient is proposed. We present modeled transmission functions of cavities utilizing a nitrogen-doped diamond, a boron-doped diamond, nanocrystalline...
-
Influence of the particle size of carbonate-siliceous rock on the efficiency of phosphorous removal from domestic wastewater
PublicationtThe aim of the study was to determine the influence of the particle size of carbonate–silica rock (opoka)used in rock filters on the efficiency of phosphorus removal from domestic wastewater. The investigationswere carried out in a laboratory using a model consisting of three vertical flow filters with carbonate–silicarock of different particle sizes (G1= 1–2 mm; G2= 2–5 mm; G3= 5–10 mm). The tested rock was subjectedto decarbonising...
-
Recent Advances in Accelerated Multi-Objective Design of High-Frequency Structures using Knowledge-Based Constrained Modeling Approach
PublicationDesign automation, including reliable optimization of engineering systems, is of paramount importance for both academia and industry. This includes the design of high-frequency structures (antennas, microwave circuits, integrated photonic components), where the appropriate adjustment of geometry and material parameters is crucial to meet stringent performance requirements dictated by practical applications. Realistic design has...
-
Performance-Driven Surrogate Modeling of High-Frequency Structures
PublicationThe development of modern high-frequency structures, including microwave and antenna components, heavily relies on full-wave electromagnetic (EM) simulation models. Notwithstanding, EM-driven design entails considerable computational expenses. This is especially troublesome when solving tasks that require massive EM analyzes, parametric optimization and uncertainty quantification be-ing representative examples. The employment of...
-
Integrated controller for ultra high frequency technique laboratory
PublicationDepartment of Microwave and Antenna Engineering decided to modernize the laboratory of Ultra High Frequency Techniques. The main change was to replace measurement of the field distribution inside rectangular waveguides by analysing the fields around striplines. This involved the need to overcome several technical and conceptual problems. Precise positioning of the probe and reading the field distribution near the stripline is important...
-
Rapid surrogate-assisted statistical analysis of compact microstrip couplers
PublicationIn this paper, a technique for low-cost statistical analysis and yield estimation of compact microwave couplers has been presented. The analysis is executed at the level of a fast surrogate model representing selected characteristic points of the coupler response that are critical to determine satisfaction/violation of the prescribed design specifications. Because of less nonlinear dependence of the characteristic points on geometry...
-
1,3,4-Thiadiazole-based diamides: Synthesis and complexation properties
PublicationAromatic diamides, derivative of 2,6-pyridinedicarboxylic acid and isophthalic acid, bearing 1,3,4-thiadiazole residue were prepared with satisfactory yields in conventional procedures and microwave stimulated reactions. X-ray structure of N,N-bis (1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide (2) DMSO solvate (2DMSO) was described. Selective zinc(II), lanthanum(III), terbium(III) and L-tyrosine recognition was found for N,N-bis(1,3,4-thiadiazol-2-yl)-2,6-pyridinedicarboxamide...
-
A novel microstrip dual-layer rat-race coupler with compact size and enhanced bandwidth
PublicationMicrowave hybrid couplers are crucial components of mixers, phase shifters, amplifiers and other high-frequency systems. Conventional couplers are characterized by large size which limits their usefulness in modern applications. In this work, a novel compact rat-race coupler with enhanced bandwidth has been proposed. The structure consists of six compact microstrip resonant cells. It is implemented on two separate layers which permits...
-
Charge-based deep level transient spectroscopy of B-doped and undoped polycrystalline diamond films
PublicationThe undoped and B-doped polycrystalline diamond thin film was synthesized by hot filament chemical vapor deposition and microwave plasma, respectively. The structural characterization was performed by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The electrical properties of synthesized diamond layer were characterized by dc-conductivity method and charge deep level transient spectroscopy. The B-doped...
-
RAMAN DIAGNOSTICS OF CVD DIAMOND GROWTH
PublicationDevelopment of Raman spectroscopic system for diagnostics of growth of diamond and BDD (Boron- Doped-Diamond) thin films during μPA CVD (Microwave Plasma Assisted Chemical Vapour Deposition) process is described. Raman studies of such films were carried out as in-situ monitoring of film deposition as ex-situ measurements conducted for a sample outside the reaction vessel after manufacturing process. Modular system for the in-situ...
-
Carnivorous plants used for green synthesis of silver nanoparticles with broad-spectrum antimicrobial activity
PublicationIn this study, we exploit the anti-oxidative potential of four carnivorous plants to produce uniform and biologically active silver nanoparticles. The use of polyvinylpyrrolidone promoted syn-thesis of quasi-spherical nanoparticles characterized by stability and high uniformity. Their activity was tested against three human pathogens and three species of plant pathogenic bacteria. The study demonstrates the influence of synthesis...
-
Kompleksowa analiza symulacyjna układu napędowego zespołu trakcyjnego
PublicationThe paper describes an approach to comprehensive analysis of traction electric drive. The drivetrain of ED-74 electric unit equipped with four inverter-fed induction motors was modeled in Matlab/Simulink. The model consists of functional blocks as: motors, inverters, drive controllers, filters. Structure and operation of the model was described. Chosen simulation results were presented and discussed. Two methods of modeling the...
-
Variable Fractional Delay Filter Design Using a Symmetric Window
PublicationIn this paper a numerically efficient method for designing a nearly optimal variable fractional delay (VFD) filter based on a simple and well-known window method is presented. In the proposed method a single window extracted from the optimal filter with fixed fractional delay (FD) is divided into even and odd part. Subsequently, the odd part is discarded and symmetric even part of the extracted window is used to design a family...
-
High frequency dynamics of an isotropic Timoshenko periodic beam by the use of the Time-domain Spectral Finite Element Method
PublicationIn this work results of numerical simulations and experimental measurements related to the high frequency dynamics of an aluminium Timoshenko periodic beam are presented. It was assumed by the authors that the source of beam structural periodicity comes from periodical alterations to its geometry due to the presence of appropriately arranged drill-holes. As a consequence of these alterations dynamic characteristics of the beam...
-
Current Source Inverter Fed Drive
PublicationThis book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A...
-
Determination of chemical oxygen demand (cod) at boron-doped diamond (bdd) sensor by means of amperometric technique
PublicationA boron-doped diamond (BDD) sensor was proposed for effective detection of chemical oxygen demand (COD) by means of amperometric technique. Thin boron doped diamond active sensor layer was deposited on Si wafer and glassy carbon substrate by Microwave Plasma Enhanced Chemical Vapor Deposition (MW PE CVD). The structure of BDD was confirmed by Raman spectra analysis. Broad Raman bands centered at 482 cm-1 and 1219 cm-1 are typical...
-
The use of thin diamond films in fiber optic low-coherence interferometers”
PublicationIn this paper we present the use of thin diamond films in fiber-optic low-coherence interferometers. Two kinds of diamond surfaces were used: undoped diamond film and boron-doped diamond film. They were deposited on glass plates as well as silicon layers. A conventionally used mirror was used as a reference layer. Diamond films were deposited using Microwave Plasma Enhanced Chemical Vapour Deposition (μPE CVD) system. Measurements...
-
The low coherence Fabry-Pérot interferometer with diamond and ZnO layers
PublicationThe authors present a fiber-optic Fabry-Pérot interferometer built with the application of diamond and zinc oxide (ZnO) thin layers. Thin ZnO films were deposited on the tip of a standard telecommunication single-mode optical fiber (SMF- 28) while the diamond layer was grown on the plate of silicon substrate. Investigated ZnO layers were fabricated by atomic layer deposition (ALD) and the diamond films were deposited using Microwave...
-
Inverse surrogate models for fast geometry scaling of miniaturized dual-band couplers
PublicationRe-design of microwave structures for various sets of performance specifications is a challenging task, particularly for compact components where considerable electromagnetic (EM) cross-couplings make the relationships between geometry parameters and the structure responses complex. Here, we address geometry scaling of miniaturized dual-band couplers by means of inverse surrogate modeling. Our approach allows for fast estimation...
-
Determination of Chemical Oxygen Demand (COD) at Boron-doped Diamond (BDD) Sensor by Means of Amperometric Technique
PublicationA boron-doped diamond (BDD) sensor was proposed for effective detection of chemical oxygen demand (COD) by means of amperometric technique. Thin boron doped diamond active sensor layer was deposited on Si wafer and glassy carbon substrate by Microwave Plasma Enhanced Chemical Vapor Deposition (MW PE CVD). The structure of BDD was confirmed by Raman spectra analysis. Broad Raman bands centered at 482 cm-1 and 1219 cm-1 are typical...
-
A Novel Modal Technique for Time and Frequency Domain Analysis of Waveguide Components
PublicationW pracy zaprezentowano, nową i szybką metodę analizy komponentów falowodowych. Metoda opiera się na kombinacji metody różnic skończonych, metody dekompozycji dziedziny obliczeniowej, redukcji rzędu modelu oraz dyskretnych rozwinięć funkcyjnych. Przedstawiona technika pozwala na skrócenie czasu analizy układu nawet o dwa rzędy wielkości w stosunku do poprzednich algorytmów.
-
Analysis of single-ground-plane coplanar waveguide
PublicationW pracy przedstawion metodę analizy rodziny koplanarnych linii transmisyjnych z pojedynczym przewodem masy. Oryginalne, nie znane wcześniej wyniki modelowania numerycznego potwierdzone zostały dużą zgodnością z wynikami pomiarów wykonanych dla struktury falowodu koplanarnego z pojedynczym przewodem masy (SGP-CPW.
-
Analysis of circular cavity with cylindrical objects
PublicationArtykuł opisuje analizę rozpraszania fali elektromagnetycznej na obiektach cylindrycznych rozmieszczonych dowolnie w strukturze rezonatora. Analiza oparta jest na metodzie dopasowania rodzajów. Dokładność i poprawność metody jest zweryfikowana poprzez porównanie uzyskanych wyników z wynikami otrzymanymi z metod alternatywnych i własnych pomiarów wykonanych układów.
-
Projection framework for hybrid methods derived from finite difference operators in time and frequency domain
PublicationW artykule przedstawiono ogólną koncepcję tworzenia algorytmów hybrydowych na bazie operatorowego sformułowania metody różnic skończonych. Wykorzystano koncepcję projekcji ortogonalnej w przestrzeni skończeniewymiarowej w celu modyfilacji pierwotnego sformułowania.
-
Equivalent spice circuits with guaranteed passivity from nonpassive models
PublicationW artykule przedstawiona została nowa technika wymuszania pasywności schematów zastępczych. Opracowana technika pozwala na konstrukcję schematów zastępczych bardzo złożonych układów, oraz pozwala na wymuszenie pasywności modelu tworzonego na podstawie danych niepasywnych.
-
Macromodeling of multiport systems using a fast implementation of the vector fitting method
PublicationMakromodelowanie układów wieloportowych przy użyciu vector fittingu jest czasochłonne oraz wymaga dużych zasobów obliczeniowych w przypadku gdy wszystkie elementy macierzy systemowej dzielą wspólne bieguny. Artykuł prezentuje stabilne rozwiązanie, które usuwa problem rzadkości macierzy poprzez zastosowanie bezpośrednie dekompozycje QR. Jako przykład przedstawiony został 60 portowy układ, który ilustruje oszczędność czasu potrzebnego...
-
Efficient and Systematic Solution of Real and Complex Eigenvalue Problems Employing Simplex Chain Vertices Searching Procedure
PublicationW artykule zaprezentowano nowatorską metodę, pozwalającą w bardzo efektywny sposób rozwiązywać rzeczywiste i zespolone zagadnienia własne (które przekształcić można w równania nieliniowe) często spotykane w elektrodynamice obliczeniowej. Idea metody oparta jest o śledzenie miejsc zerowych otrzymanego równania nieliniowego. W proponowanej technice zastosowano regularne wielościany, budując z nich łańcuch (ścieżkę) poszukiwanych...
-
Simulation and Experiment of a Compact Wideband 90^{circ} Differential Phase Shifter
PublicationArtykuł przedstawia projekt i analizę kompaktowego różnicowego przesuwnika fazy, który jest rozwinięciem konfiguracji zaproponowanej Abbosha poprzez modyfikację obciążenia wrót. Zaproponowana konfiguracja zawiera 3dB sprzęgacz kierunkowy z wrotami transmisyjnymi i sprzężonymi zakończonymi obciążeniami reaktancyjnymi. W artykule przedstawiono model teoretyczny prezentujący zasadę działania układu i jego projekt. Uzyskane wyniki...
-
Quadratic programming approach to coupled resonator filter cad
PublicationArtykuł prezentuje technikę komputerowego wspomagania procesu projektowania filtrów zbliżeniowych. Polega ona na sformułowaniu macierzy sprzężeń jako problemu programowania kwadratowego (QP). Dzięki zdefiniowaniu procedury optymalizacyjnej jako problemu QP, przy założeniu liniowej zależności współczynników sprzężeń od wymiarów geometrycznych struktury, uzyskano znaczącą redukcję liczby pełnofalowych symulacji prowadzących do uzyskania...
-
Wideband Macromodels in Finite Element Method
PublicationThis letter proposes a novel projection technique for accelerating Finite Element Method simulations. The algorithm is based on the Second-order Arnoldi Method for Passive Order Reduction (SAPOR). It involves generation of two projection bases and thanks to this it is applicable to the systems of equations, which contain the quadratic frequency-dependence in the input term, that arise when projection is applied locally in the selected...
-
Model Order Reduction for Problems With Dispersive Surface Boundary Conditions
PublicationThis letter proposes a new scheme for reduced-order finite-element modeling of electromagnetic structures with nonlinear, dispersive surface boundary conditions, which optimally exploits the numerically stable and efficient MOR framework for second-order systems provided by SAPOR method. The presented results of numerical experiments for an example of a waveguide filter demonstrate the superior accuracy of the resulting reduced models...
-
Greedy Multipoint Model-Order Reduction Technique for Fast Computation of Scattering Parameters of Electromagnetic Systems
PublicationThis paper attempts to develop a new automated multipoint model-order reduction (MOR) technique, based on matching moments of the system input–output function, which would be suited for fast and accurate computation of scattering parameters for electromagnetic (EM) systems over a wide frequency band. To this end, two questions are addressed. Firstly, the cost of the wideband reduced model generation is optimized by automating a...
-
An Analysis of Multistrip Line Configuration on Elliptical Cylinder
PublicationA configuration of multistrip lines mounted on a multilayer dielectric coated elliptic cylinder is investigated in this paper. A full-wave analysis and a moment-method calculation are employed. The analysis is carried out considering the expansion of the field as a series of Mathieu functions. Both open and shielded lines are considered in the analysis. Propagation coefficients and characteristic impedances are calculated for the...
-
Comments on ''An innovative fast powerful method for tackling electromagnetic eigenvalue problems for multistrip transmission lines''
PublicationPraca stanowi komentarz do publikacji Casanuevy i Garcii dotyczącej techniki szybkiego obliczania charakterystyk dyspersyjnych falowodów z niejednorodnym wypełnieniem. Zwrócono uwagę na niepotrzebną komplikację zagadnienia poprzez zastosowanie techniki rozkładu na wartości szczególne.
-
Characterization of rectangular waveguide with a pseudochiral omega slab
PublicationMetodę dopasowania rodzajów zastosowano do rozwiązania falowodu prostokątnego zawierającego materiał pseudochiralny typy Omega. Zdefiniowano własności rodzajów pola w badanej prowadnicy oraz zauważono wystąpienie efektu przemieszczenia pola. Określono pełnofalową macierz rozproszenia sekcji badanego falowodu oraz porównano wyniki symulacji charakterystyk transmisyjnych sekcji z eksperymentem. W oparciu o uzyskane wyniki dokonano...
-
Coupled - mode design of ferrite loaded coupled microstrip lines section
PublicationMetodę rodzajów sprzężonych zastosowano do analizy i projektowania sekcji ferrytowych mikropaskowych linii sprzężonych magnesowanych podłużnie (FCL). W wyniku analizy określono macierz rozproszenia sekcji oraz warunki umożliwiające jej zastosowanie do realizacji cyrkulatora projetowanego jako połączenie badanej sekcji FCL z mikropaskowym rozgałęzieniem typu T. W oparciu o opracowane oprogramowanie przeprowadzono modelowanie parametrów...
-
Quasi-static finite-element analysis of a skewed microstrip crossover
PublicationPrzedstawiono quasi statyczną analizę skrzyżowania mikroskopowego na podłożu dielektycznym. Mikropaski znajdują się na różnych warstwach układu planarnego i mogą krzyżować się pod dowolnym kątem. Pojemności i indukcyjności obliczane są na podstawie rozkładu potencjałów skalarnych. W sformułowaniu zagadnienia magnestatycznego warunki brzegowe dla potencjału skalarnego wprowadzono za pomocą powierzchni rozcięcia dziedziny analizy....
-
A new class of eigenfunction expansion methods for fast frequency-domain analysis of waveguides
PublicationZaprezentowano nową technikę szybkiego obliczania charakterystyk dyspersyjnych falowodów z niejednorodnym wypełnieniem. Metoda ta oblicza przybliżone wartości stałej propagacji dla wymaganej częstotliwości, bazując na bardziej dokładnych wyliczeniach rozkładu pola i stałej propagacji dla kilku wybranych punktów częstotliwości.
-
Low-order models from FD-TD time samples
PublicationNiniejszy artykuł zawiera opis szeregu kryteriów pozwalających na automatyczne tworzenie wysokiej jakości modeli sygnałów czasowych uzyskanych w drodze symulacji obwodów wysokiej częstotliwości metodą różnic skończonych w dziedzinie czasu. Podany jest szczegółowy opis selekcji kluczowych parametrów modeli takich jak wybór długości ciągu użytego do konstrukcji modeli, współczynnika decymacji silnie nadpróbkowanego przebiegu w dziedzinie...
-
A Mesh Deformation Technique Based on Solid Mechanics for Parametric Analysis of High-Frequency Devices With 3-D FEM
PublicationIn this paper, a versatile technique for mesh defor- mation is discussed, targeted at the electromagnetic (EM) field simulation of high-frequency devices using the 3-D finite element method (FEM). The approach proposed applies a linear elasticity model to compute the displacements of the internal mesh nodes in 3-D when the structure geometry is changed. The technique is compared with an alternative approach...
-
Hybrid Analysis of Structures Composed of Axially Symmetric Objects
Publication— A hybrid method for the scattering problems in shielded and open structures is presented. The procedure is based on the combination of body-of-revolution involving finite-element methods with impedance matrix formulation and the mode-matching technique, which can be utilized for the analysis of structures with axially symmetrical scatterers. In order to confirm the validity and efficiency of the proposed approach, a few examples...
-
Machine-Learning-Powered EM-Based Framework for Efficient and Reliable Design of Low Scattering Metasurfaces
PublicationPopularity of metasurfaces has been continuously growing due to their attractive properties including the ability to effectively manipulate electromagnetic (EM) waves. Metasurfaces comprise optimized geometries of unit cells arranged as a periodic lattice to obtain a desired EM response. One of their emerging application areas is the stealth technology, in particular, realization of radar cross section (RCS) reduction. Despite...
-
Rapid EM-Driven Design of Compact RF Circuits By Means of Nested Space Mapping
PublicationA methodology for rapid design of RF circuits constituted by compact microstrip resonant-cells (CMRCs) is presented. Our approach exploits nested space mapping (NSM) technology, where the inner SM layer is used to correct the equivalent circuit model at the CMRC level, whereas the outer layer enhances the coarse model of the entire structure under design. We demonstrate that NSM dramatically improves performance of surrogate-based...
-
A Self-Equalized Waveguide Filter With Frequency-Dependent (Resonant) Couplings
PublicationThis letter presents a design of a fifth-order linear phase filter with frequency-dependent couplings. The filter is composed of a triplet that is directly coupled to two resonators at the input and output. To provide group delay flattening a cross-coupling in the trisection has a strongly dispersive character with a negative slope parameter. To achieve this, an E-plane stub with a septum was used. To further improve the filter...
-
Revisiting Toroidal Dipolar Moment in Planar Metamaterial
PublicationThis article revisits the electric, magnetic, and toroidal dipolar moments in the metamaterial structure and presents the flatland design for generating a toroidal dipolar response for the electromagnetic plane wave at normal incidence. Based on the numerical analysis of the surface current, the electric field, the magnetic field, and the quantitative analysis of scattered power supported by the electromagnetic multipole theory,...
-
Regularized Local Multivariate Reduced-Order Models With Nonaffine Parameter Dependence
PublicationThis paper addresses a singular problem, not yet discussed in the literature, which occurs when parametric reduced-order models are created using a subspace projection approach with multiple concatenated projection bases. We show that this technique may lead to the appearance of localized artifacts in the frequency characteristics of a system, even when the reduced-order projection basis is rich enough to describe the original...