Filters
total: 4269
filtered: 3824
displaying 1000 best results Help
Search results for: COMPRESION IGNITION ENGINE EMISION REDUCTION ALTERNATIVE FUELS ECU CALIBRATION DUAL FUEL MODE
-
Failure mode prediction for composite structural insulated panels with MgO board facings
PublicationSandwich panels are readily used in civil engineering due to their high strength to weight ratio and the ease and speed of assembly. The idea of a sandwich section is to combine thin and durable facings with a light-weight core and the choice of materials used allows obtaining the desired behaviour. Panels in consideration consist of MgO (magnesium oxide) board facings and expanded polystyrene core and are characterized by immunity...
-
Design Evolution of the Ultrasonic Piezoelectric Motor Using Three Rotating Mode Actuators
PublicationThe development process and experimental investigation of the multicell piezoelectric motor is presented in this paper. The proposed design consists of three individual cells integrated into the stator, double rotor, and a preload system. Those elements are combined into a symmetrical structure of the motor. The two new prototypes have been designed, simulated and tested. Finite element numerical analysis is carried out to obtain...
-
Reliability model of two-shaft turbine combustion engine with heat regenerator
PublicationW artykule przedstawiono możliwość zastosowania teorii procesów semimarkowskich do opisu niezawodności turbinowego silnika spalinowego. Opracowano model niezawodnościowy w formie siedmiostanowego procesu semimarkowskiego, umożliwiający określenie prawdopodobieństw przebywania silnika w stanie zdatności oraz wyróżnionych stanach niezdatności.
-
Model of the reciprocating engine using iterative procedures of the transient torque calculation
PublicationPrzedstawiony w pracy model silnika spalinowego uzależnia wartość dynamicznego momentu od sygnału sterowania po skokowej zmianie nastawy oraz od historii dynamicznej silnika i czasu jaki upłynął od tej zmiany. Przedstawione wyniki badań potwierdzają zasadność takiego opisu modelowanego zjawiska. Można również zauważyć, że po pewnym czasie od chwili rozpoczęcia procesu rozpędzania przebieg momentu dynamicznego będzie przebiegał...
-
Process modeling inside cylinder in an internal combustion engine with heat regeneration
Publication -
Failure model of main elements of the ship engine crankshaft-piston assembly
PublicationThe paper presents a failure model of main elements of the crankshaft-piston assembly, based on failures ofcrankshaft-piston assembly and timing gear system of the Sulzer RD engines, retrieved from the equipment reliabilitydata of selected ships.
-
Exfoliated Graphite as a New Sorbent for Removal of Engine Oils from Wastewater
Publication -
The use of can in automation test bench to test the engine cooling system
PublicationW publikacji opisano zasady rejestracji danych pomiarowych w hamowni silnikowej do badań układów chłodzenia silników samochodowych. Założeniami projektu stanowiska było użycie standardu przesyłu danych typu CAN. Opracowano metodę dużej gęstości zapisu przesyłanych danych.
-
Analysis of the torque response of a car engine to the step change of the control signal
PublicationW pracy zamieszczono wyniki badań silnika samochodu osobowego w warunkach nieustalonych. Stan obciążenia silnika wynikał z realizowanego cyklu jezdnego w warunkach drogowych oraz sposobu sterowania układem napędowym. Parametry trakcyjne pojazdu mierzone były za pomocą systemu GPS z fenomenologiczną korektą sygnału wysokości, na której się on znajdował. Wybrane parametry pracy silnika mierzone były za pomocą sytemu komunikującego...
-
Dynamic analysis of the first stage compressor bladed disc of an aircraft engine
Publication -
Turning process monitoring of internal combustion engine piston’s cylindrical surface
Publication -
Investigation of the IC engine lubricating oil effects on journal bearing life
PublicationPrzedstawiono wyniki modelowych badań eksperymentalnych wytrzymałości zmęczeniowej warstwy ślizgowej łożysk silników spalinowych. W szczególności oceniono wpływ właściwości oleju smarowego na tę wytrzymałość.
-
Diagnosis´ likelihood and diagnosis rightness about the technical state of diesel engine
PublicationW referacie uzasadniono potrzebę rozróżniania pojęć "wiarygodność diagnozy" i "trafność diagnozy" przy podejmowaniu decyzji eksploatacyjnych. Wyprowadzono wzór na prawdopodobieństwo sformułowania diagnozy jako miary wiarygodności diagnozy. Do wyprowadzenia tego wzoru zastosowano teorię procesów semimarkowskich oraz wzór Bayesa na prawdopodobieństwo warunkowe.
-
Research on the phenomena of warming up and free cooling down the car engine
PublicationThe average cold start temperature in Europe is 9 degrees C. However, not the average is the most important for the composition of exhaust gases and associated air pollution. The most onerous for the environment are the winter starts when automotive emissions of harmful gases add up in cities with those of home heating systems. The paper presents preliminary studies of warming up and cooling down processes in various environmental conditions....
-
On Deck Oil Spill Clean-Up Materials – Solution for Engine Rooms
Publication -
Explicit Size-Reduction of Circularly Polarized Antennas through Constrained Optimization with Penalty Factor Adjustment
PublicationModern communication systems of high data capacity incorporate circular polarization (CP) as the preferred antenna radiation field configuration. In many applications, integration of the system circuitry with antennas imposes size limitations on CP radiators, which makes their development process a challenging endeavor. This can be mitigated by means of simulation-driven design, specifically, constrained numerical optimization....
-
Characteristics of LaCo 0.4 Ni 0.6-x Cu x O 3-δ ceramics as a cathode material for intermediate-temperature solid oxide fuel cells
PublicationIn this study, the effects of Cu-ion substitution on the densification, microstructure, and physical properties of LaCo0.4Ni0.6-xCuxO3-δ ceramics were investigated. The results indicate that doping with Cu ions not only enhances the densification but also promotes the grain growth of LaCo0.4Ni0.6-xCuxO3-δ ceramics. The Cu substitution at x ≤ 0.2 can suppress the formation of La4Ni3O10, while the excess Cu triggers the formation...
-
Utilization of thermal decomposition of immobilized compounds for the generation of gaseous standard mixtures used in the calibration of gas analysers
Publication -
Physical modeling in sands in a wide range of stress level: Application to the calibration of CPTU i DMT tests.
PublicationPraca dotyczy badań modelowych w gruntach niespoistych ze szczególnym uwzględnieniem wpływu wysokiego poziomu naprężenia na zachowanie się podłoża gruntowego. Praca składa się z siedmiu rozdziałów. W pierwszym z nich opisano zachowanie się piasku w szerokim zakresie naprężeń z uwzględnieniem ściśliwości, kruszenia się ziaren, nieliniowości obwiedni zniszczenia oraz nieliniowości modułu odkształcenia związanych z poziomem naprężenia...
-
Filter-Hilbert Method for Automatic Correction of Non-Anechoic Antenna Measurements with Embedded Self-Calibration Mechanism
PublicationOne of the most important steps in the process of antenna development involves measurements of its prototype. Far-field performance of radiators is normally characterized in strictly controlled environments such as anechoic chambers which can ensure certification-grade accuracy. Unfortunately, they are also characterized by high construction costs which might not be justified for low-budget research and/or teaching-related activities....
-
A study on the protection of methionine and the reduction of methionine sulfoxide in methionine-containing analogues of the growth-modeling factor Gly-His-Lys
PublicationThe protection of methionine and the reduction of methionine sulfoxide in methionine-containing analogues of Gly-His-Lys are described. The peptides were synthesized by a solid-phase method using the standard Fmoc procedure. Simultaneous deprotection of the peptide side chain and liberation from the resin were achieved using an appropriate TFA cocktail. The TFA cocktail was selected to minimize oxidation of the methionine residue....
-
Effect of mid-frequency discharge assistance on dual-high power impulse magnetron sputtering
Publication -
Obstructive sleep apnea and intermittent hypoxia increase expression of dual specificity phosphatase 1
Publication -
Current state of a dual behaviour of antimicrobial peptides-Therapeutic agents and promising delivery vectors
Publication -
The Application of Granulated Expanded Glass Aggregate with Cement Grout as an Alternative Solution for Sub-Grade and Frost-Protection Sub-Base Layer in Road Construction
PublicationThe purpose of the research was to assess the possibility of using granulated expanded glass aggregate (GEGA) with cement grout as a replacement of a sub-grade and frost-protection layer, made of natural fine aggregates (NATU), stabilized with a hydraulic binder. Instead of traditional parts of the road construction, such as the sub-grade and frost-protection layer with the application of fine aggregate, stabilized with cement,...
-
Influence of the improved reduction technique on superconductivity in Nd1.85Ce0.15Cu1±yO4−δ
Publication -
Heterogeneous Ensemble with Combined Dimensionality Reduction for Social Spam Detection
Publication -
Reduction of Tire Rolling Resistance by Optimization of Road Surfaces and Tires
PublicationDuring interaction between tire and road surface three very important phenomena are always in effect. One of them (very desirable) is friction that is important for traction, braking and cornering. Two other phenomena are not desirable at all, that is rolling resistance and noise. This paper discusses relations between road surface and tire parameters versus tire rolling resistance. Road surface texture, porosity, impedance, strength...
-
Model Order Reduction for Problems With Dispersive Surface Boundary Conditions
PublicationThis letter proposes a new scheme for reduced-order finite-element modeling of electromagnetic structures with nonlinear, dispersive surface boundary conditions, which optimally exploits the numerically stable and efficient MOR framework for second-order systems provided by SAPOR method. The presented results of numerical experiments for an example of a waveguide filter demonstrate the superior accuracy of the resulting reduced models...
-
Carbon Nanotubes Derivatized with Mediators for Laccase Catalyzed Oxygen Reduction.
PublicationPrzedstawiono konstrukcję elektrody w której wykorzystano nanorurki modyfikowane znanym mediatorem (ABTS). Cząsteczki mediatora przyłączono do ścian bocznych nanorurek oraz do ich końców. Porównano parametry elektrod zbudowanych w oparciu o nanorurki modyfikowane kowalencyjnie w różny sposób. Zaobserwowano pozytywny wpływ modyfikowanych nanorurek na parametry elektrody.
-
Influence of the improved reduction technique on superconductivity in Nd1.85Ce0.15Cu1+_yO4-z
PublicationW pracy opisano zmodyfikowany proces redukcji próbek ceramicznych NCCO oraz jego wpływ na właściwości nadprzewodzące związku. Uzyskano dobre właściwości nadprzewodzące dla próbek z 2% niedoborem Cu oraz bardzo dobre wyniki dla próbek z 2% nadmiarem Cu.
-
Cobalt-/Copper-Containing Perovskites in Oxygen Evolution and Reduction Reactions
Publication -
Putative Biological Mechanisms of Efficiency of Substrate Reduction Therapies for Mucopolysaccharidoses
Publication -
The origin of luminescence accompanying electrochemical reduction or chemical decomposition of peroxydisulfates
Publication -
Drift, wow and flutter measurement and reduction in shrunken movie soundtracks
PublicationReferat przedstawia metodę i algorytmy do oceny i redukcji dryfu, kołysania i drżenia w skurczonych taśmach filmowych. Przedstawione algorytmy działają w oparciu o przetwarzaniu obrazu taśmy filmowej w celu wyznaczenia jej lokalnego skurczu, który jest jednym z powodów powstawania dryfu, kołysania i drżenia. Lokalny skurcz taśmy można wyznaczyć dzięki analizie wysokości: ramki obrazu, perforacji, lub innego, standaryzowanego elementu...
-
The Method of Reduction of Aerodynamic Forces Generated in Turbine Blade Seals
PublicationOpisano metodę zmniejszania sił wymuszających drgania aerodynamiczne poprzez zastosowanie nowego uszczelnienia nadbandażowego typu komorowego. Efektywność stosowania uszczelnienia komorowego potwierdzono obliczeniami numerycznymi i badaniami eksperymentalnymi.
-
Reduction of Computational Complexity in Simulations of the Flow Process in Transmission Pipelines
PublicationThe paper addresses the problem of computational efficiency of the pipe-flow model used in leak detection and identification systems. Analysis of the model brings attention to its specific structure, where all matrices are sparse. With certain rearrangements, the model can be reduced to a set of equations with tridiagonal matrices. Such equations can be solved using the Thomas algorithm. This method provides almost the same values...
-
Evaluation of dampness-induced strength reduction of calcium silicate blocks
Publication -
High-performance NdSrCo2O5+δ–Ce0.8Gd0.2O2-δ composite cathodes for electrolyte-supported microtubular solid oxide fuel cells
PublicationNdSrCo2O5+δ (NSCO) is a perovskite with an electrical conductivity of 1551.3 S cm−1 at 500 °C and 921.7 S cm−1 at 800 °C and has a metal-like temperature dependence. This perovskite is used as the cathode material for Ce0.8Gd0.2O2-δ (GDC)-supported microtubular solid oxide fuel cells (MT-SOFCs). The MT-SOFCs fabricated in this study consist of a bilayer anode, comprising a NiO–GDC composite layer and a NiO layer, and a NSCO–GDC...
-
Cost-Efficient EM-Driven Size Reduction of Antenna Structures by Multi-Fidelity Simulation Models
PublicationDesign of antenna systems for emerging application areas such as the Internet of Things (IoT), fifth generation wireless communications (5G), or remote sensing, is a challenging endeavor. In addition to meeting stringent performance specifications concerning electrical and field properties, the structure has to maintain small physical dimensions. The latter normally requires searching for trade-off solutions because miniaturization...
-
Determination of fuel combustion product in airport runoff water samples using liquid–liquid extraction with gas chromatography–spectrometry
PublicationDetermination of xenobiotics in samples of airport runoff water is both a complex and indispensable task due to an increasing threat resulting from the activities of numerous airports. The aim of this study was to develop, optimize, and validate a procedure based on liquid–liquid extraction (LLE) coupled with gas chromatography–mass spectrometry (GC–MS) for the determination of polycyclic aromatic hydrocarbons (PAHs). So far, no...
-
Potential Alternative to Styrene–Butadiene–Styrene for Asphalt Modification Using Recycled Rubber–Plastic Blends
Publication -
Position of LiF:Mg,Cu,P TL peak as an alternative method for ultra-high-dose dosimetry
Publication -
Alternative Local Melting-Solidification of Suspended Nanoparticles for Heterostructure Formation Enabled by Pulsed Laser Irradiation
Publication -
On Decision-Making Strategies for Improved-Reliability Size Reduction of Microwave Passives: Intermittent Correction of Equality Constraints and Adaptive Handling of Inequality Constraints
PublicationDesign optimization of passive microwave components is an intricate process, especially if the primary objective is a reduction of the physical size of the structure. The latter has become an important design consideration for a growing number of modern applications (mobile communications, wearable/implantable devices, internet of things), where miniaturization is imperative due to a limited space allocated for the electronic circuitry....
-
Partial inhibition of borohydride hydrolysis using porous activated carbon as an effective method to improve the electrocatalytic activity of the DBFC anode
PublicationCarbon materials are commonly used catalyst supports in various types of fuel cells. Due to the possibility of designing their properties, they seem to be attractive and functional additives. In Direct Borohydride Fuel Cells (DBFCs), the electrooxidation reaction of borohydride competes with the undesirable hydrolysis reaction, therefore our work aimed to modify anodes based on a multi-component hydrogen storage alloy with a small...
-
High temperature corrosion of stainless steels for Solid Oxide Fuel Cells
PublicationW pracy przedstawiono wyniki korozyjności wysokotemperaturowej stali litych i porowatych stosowanych w tlenkowych ogniwach paliwowych.
-
Performance of a fuel cell optimized for in situ X-ray absorption experiments
PublicationKomercyjna komórka ogniwa paliwowego typu PEM została zmodyfikowana w celu realizacji pomiaru XAS w warunkach pracy ogniwa. Modyfikacja komórki miała na celu optymalizację jej parametrów pod kątem eksperymentu XAS realizowanego w modzie transmisyjnym i fluorescencyjnym, poprzez minimalizację absorpcji komórki, przy zachowaniu jej parametrów elektrochemicznych. W pracy zostały zaprezentowane szczegóły techniczne komórki a jej efektywność...
-
Are Radicals Formed During Anion-Exchange Membrane Fuel Cell Operation?
Publication -
Impedance Spectroscopy as a Diagnostic Tool of Degradation of Solid Oxide Fuel Cells
Publicationw pracy przedstawiono wyniki badań degradacji tlenkowych ogniw paliwowych przeprowadzone metodą spektroskopii impedancyjnej. Ogniwa paliwowe zostały przetestowane w eksperymentalnych warunkach, które pozwalają na uzyskanie szybkiego spadku wydajności ogniw paliwowych. impedancja i parametry uzyskane z dopasowania widm do elektrycznego obwodu zastępczego zostały skorelowane z poziomem degradacji elementów ogniw paliwowych - anody...