Filters
total: 925
filtered: 384
-
Catalog
Chosen catalog filters
Search results for: CIVIL ENGINEERING.
-
Use of calibration chamber as a large triaxial apparatus
PublicationModelowanie wycinka kolumny żwirowej o wysokości 1 m w komorze kalibracyjnej. Badania przeprowadzono przy różnym naprężeniu bocznym w komorze. Kolumnę poddano obciążeniu pionowemu przy odkształceniu pionowym do 2%. Określono jej parametry wytrzymałościowe oraz moduły odkształcenia przy obciążeniu oraz w cyklach odciążenie-powtórne obciążenie.
-
Mutual hydrodynamic interaction between the operating propeller and the rudder
PublicationPraca przedstawia opis algorytmu i programu do analizy oddziaływania hydrodynamicznego pomiędzy pracującą śrubą a sterem. Algorytm jest oparty na jednoczesnym rozwiązaniu zadania brzegowego dla śruby i steru. Wyniki obliczeń obejmują rozkłady ciśnienia i zmienne siły hydrodynamiczne na śrubie i sterze oraz niestacjonarne zjawiska kawitacyne na obu obiektach. Wyniki obliczeń porównano z rezultatami badań eksperymentalnych.
-
Statistical data of hull main parameters useful for preliminary design of SWATH ships
PublicationW artykule przedstawiono rezultaty badań dotyczących statystycznych relacji głównych parametrów projektowych kadłuba statków typu SWATH, wykonanych w oparciu o zebrane w literaturze przedmiotu dane o ponad osiemdziesięciu statkach. Zależności statystyczne przedstawiono w postaci histogramów: długości statku L, histogramów wartości stosunków długości do szerokości L/B, długości do wysokości bocznej L/H, długości pływaków do ich...
-
3D Form analysis of rope deformation with long towed underwater hydroacoustic antenna
PublicationArtykuł opisuje rozwiązanie zagadnienia brzegowego dla zestawu długiej liny holującej i podwodnej anteny hydroakustycznej o gęstości, tej ostatniej, nieznacznie większej od gęstości wody i małej sztywności. Znane jest tylko położenie punktu zamocowania liny do okrętu (p-kt początkowy holowanego zestawu) oraz głębokość, na której znajduje się koniec anteny. Przedstawiono analizę sił działających na holowany zestaw, ich równania...
-
Stability analysis of multilayered composite shells with cut-outs
PublicationW pracy analizowana jest stateczność ściskanej osiowo kompozytowej powłoki warstwowej. Badany jest wpływ usytuowanego centralnie w powłoce kwadratowego otworu na stateczność konstrukcji. Obliczenia wykonano w programie NX-Nastran (wersja 6.0). Poziom obciążeń krytycznych wyznaczony został w rozwiązaniu liniowym (liniowy problem własny) oraz na drodze analizy przyrostowej z uwzględnieniem dużych przemieszczeń (statyka nieliniowa)....
-
Assessment of ship squat in shallow water using CFD
PublicationArtykuł zawiera wstęp do problemu modelowania efektów wody ograniczonej przy użyciu komercyjnego programu Fluent opartego na metodzie elementów skończonych.
-
The crucial contemporary problems of the computational methods for ship propulsor hydrodynamics
PublicationPraca przedstawia krytyczny przegląd współczesnych metod obliczeniowych stosowanych do projektowania i analizy pracy pędników okretowych. Omówiono modele linii nośnej i powierzchni nośnej, a także metody elementów brzegowych i metody RANSE oraz LES. Przedstawiono przykładowe wyniki obliczeń oraz oceniono i porównano dokładność opisywanych metod.
-
A computer system for the complete design of ship propellers
PublicationPraca zawiera opis metody obliczeniowej pozwalającej na zaprojektowanie okrętowej śruby napędowej dla również obliczeniowo wyznaczonego niejednorodnego pola prędkości za kadłubem statku o znanej geometrii i parametrach ruchu. Metoda pozwala na właściwe ujęcie efektu skali i konsekwencji obecności płetwy sterowej za projektowaną śrubą.
-
Linear analysis of laminated multilayered plates with the application of zig-zag function
PublicationW pracy analizowany jest dwuwymiarowy model MES płyty warstwowej bazujący na teorii ścinania pierwszego rzędu, w którego sformułowaniu uwzględnione są dodatkowo efekt zig-zag oraz warunki równowagi międzywarstwowej. Zygzakowa deformacja przekroju modelowana jest poprzez wzbogacenie liniowego rozkładu przemieszczeń teorii ścinania pierwszego rzędu kawałkami ciągłą funkcją Murakami'ego. Pole przemieszczeń w prezentowanym sformułowaniu...
-
Chemical Composition of Industrial Wood Waste and the Possibility of its Management
Publication -
Scale effect in shaft friction from direct shear tests
PublicationPrzeanalizowano wartości maksymalne tarcia uzyskane w aparacie bezpośredniego ścinania w kontakcie konstrukcja-grunt dla piasków kwarcowych i węglanowych oraz gładkiego i szorstkiego kontaktu. Badania przeprowadzono przy regulowanej sztywności normalnej kontaktu, przy różnej składowej normalnej naprężenia w kontakcie i różnym zagęszczeniu gruntu. Określono efekt skali jako stosunek wartości tarcia mobilizowanego na modelu do tarcia...
-
Damage Detection of Steel-Concrete Composite Beam
Publication -
Modelling and parameter identification of steel–concrete composite beams in 3D rigid finite element method
Publication -
Fatigue damage development in 10CrMo9-10 steel for power plant pipes in as-received state and after 280,000 h of exploitation
Publication -
Numerical simulation of screw displacement pile interaction with non-cohesive soil
PublicationA trial numerical simulation of screw displacement pile interaction with non-cohesive subsoil during the transfer of compression load. The simulation was carried out in an axisymmetric system. The technological phases of pile installation in the ground were numerically modelled using equivalent processes which provided similar effects to real technical actions. The results of the numerical calculations were verified by comparing...
-
The influence of plasma-sprayed coatings on surface properties and corrosion resistance of 316L stainless steel for possible implant application
Publication -
Successfull urban regeneration project: Gdansk-Letnica district case study
PublicationThe paper presents the process of urban regeneration of Gdansk Letnica district, a project that from a very short time perspective can be described as successful. The paper present a brief district's history as well as analysis of circumstances that may have influenced Gdansk authorities' decision of starting an urban regeneration project.
-
Machine learning-based seismic response and performance assessment of reinforced concrete buildings
PublicationComplexity and unpredictability nature of earthquakes makes them unique external loads that there is no unique formula used for the prediction of seismic responses. Hence, this research aims to implement the most well-known Machine Learning (ML) methods in Python software to propose a prediction model for seismic response and performance assessment of Reinforced Concrete Moment-Resisting Frames (RC MRFs). To prepare 92,400 data...
-
Optimal retrofit strategy using viscous dampers between adjacent RC and SMRFs prone to earthquake‑induced pounding
PublicationNowadays, retrofitting-damaged buildings is an important challenge for engineers. Finding the optimal placement of Viscous Dampers (VDs) between adjacent structures prone to earthquake-induced pounding can help designers to implement VDs with optimizing the cost of construction and achieving higher performance levels for both structures. In this research, the optimal placement of linear and nonlinear VDs between the 3-story, 5-story,...
-
Theoretical and experimental analysis of guided wave propagation in plate-like structures with sinusoidal thickness variations
PublicationGuided waves have attracted significant attention for non-destructive testing (NDT) and structural health monitoring (SHM) due to their ability to travel relatively long distances without significant energy loss combined with their sensitivity to even small defects. Therefore, they are commonly used in damage detection and localization applications. The main idea of incorporating guided waves in NDT and SHM is based on processing...
-
The basics of design and experimental tests of the commutation unit of a hydraulic satellite motor
Publicationhe article presents an analytical method to design the commutation unit in a hydraulic satellite motor. It is shown that the size of the holes feeding the working chambers and their location on the plates closing those chambers depends on the geometrical dimensions of the working mechanism. The overlap in the commutation unit depends on the rotational speed range. It is demonstrated that the geometrical dimensions of the commutation...
-
PROBLEMS OF COLLISIONS BETWEEN ADJACENT STEEL STRUCTURES UNDER EARTHQUAKE EXCITATION
PublicationNowadays, the high level of urbanization forces the engineers to design closely-separated structures and to take into account many factors influencing their response, including collisions between them due to insufficient separation distance during moderate to strong ground motions. Recent observations as well as experimental and numerical investigations have confirmed that interactions...
-
ASSESSMENT OF NATURAL VENTILATION SYSTEM FOR A TYPICAL RESIDENTIAL HOUSE IN POLAND
PublicationThe paper presents the research results of field measurements campaign of natural ventilation performance and effectiveness in a residential building. The building is located in the microclimate whose parameters differ significantly in relation to a representative weather station. The measurement system recorded climate parameters and the physical variables characterizing the air flow in the rooms within 14 days of the winter season....
-
APPLYING RANSAC ALGORITHM FOR FITTING SCANNING STRIPS FROM AIRBORNE LASER SCANNING
PublicationDuring the development of the data acquired by airborne laser scanning the important issue is the fitting and georeferencing of ALS point clouds by means of the tie surfaces and the reference planes. The process of scanning strips adjustment is based on mutual integration of point clouds (scanning strips) and their adaptation to the reference planes.In simultaneous adjustment all strips are combined into one geometrically coherent...
-
Application of the Mathar method to identify internal stress variation in steel as a welding process result
PublicationThe paper deals with the method to identify internal stresses in two-dimensional steel members. Steel members were investigated in the delivery stage and after assembly, by means of electric-arc welding. In order to perform the member assessment two methods to identify the stress variation were applied. The first is a non-destructive measurement method employing local external magnetic field and to detecting the induced voltage,...
-
TRUSS JOINT WITH POSITIVE ECCENTRICITY EXPERIMENTAL RESEARCH
PublicationDue to the technological reasons in modern lightweight steel trusses, fabricated from cold- formed sections, positive eccentricities appear in the truss nodes what induce additional forces in the truss chords. To account for the real load-carrying capacity of truss node area the steel structure research in scale 1:1 were conducted. The experiments consisted of two parts: preliminary and proper one, when conclusions from...
-
Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers
PublicationSeismic-induced pounding between adjacent buildings may have serious consequences, ranging from minor damage up to total collapse. Therefore, researchers try to mitigate the pounding problem using different methods, such as coupling the adjacent buildings with stiff beams, connecting them by using viscoelastic links, and installing damping devices in each building individually. In the current paper, the effect of using linear and...
-
The use of GFRP tubes as load-bearing jackets in concrete-composite columns
PublicationThe paper presents the fields of applications of polymer composites in building structures. The use of composite glass fibre tubes is discussed in more detail. The laboratory methods used to test the mechanical properties of these pipes are presented. An original research program is presented, including six concrete-filled glass fibre tubes. The cylinders and columns made in this way were tested for their axial load capacity. Conclusions...
-
Modeling, simulation, and validation of a TB41 crash test of the H2/W5/B concrete vehicle restraint system
PublicationThe paper addresses numerical simulations of a concrete vehicle restraint system. The model is described in detail. The advanced material law of the continuous surface cap model was used to analyze the damage locations in concrete barrier segments. The results were validated against the TB41 full-scale crash test. The test was conducted in compliance with European standard EN 1317, and the validation was performed in accordance...
-
Study on applicability of two modal identification techniques in irrelevant cases
PublicationStudy on applicability of two modal identification techniques in irrelevant cases is made in this paper. The following techniques are considered: Peak Picking based on correlation analysis (PP-CA), dedicated for ambient vibrations and Eigensystem Realization Algorithm (ERA), formulated for free decay vibrations investigation. Irrelevant cases are found when analyzed signals are different than recommended to a given technique. The...
-
Flexural behavior of composite structural insulated panels with magnesium oxide board facings
PublicationThe current report is devoted to the flexural analysis of a composite structural insulated panel (CSIP) with magnesium oxide board facings and expanded polystyrene (EPS) core, that was recently introduced to the building industry. An advanced nonlinear FE model was created in the ABAQUS environment, able to simulate the CSIP’s flexural behavior in great detail. An original custom code procedure was developed, which allowed to include...
-
Stability analysis of cylindrical composite shells in MSC/Nastran
PublicationW pracy badane jest zastosowanie systemu MSC/NASTRAN for Windows do analizy stateczności kompozytowych powłok cylindrycznych. Przeprowadzono obliczenia dla dwóch wybranych przykładów paneli cylindrycznych poddanych równomiernemu ściskaniu w kierunku tworzącej dokonując analizy zarówno w zakresie stateczności początkowej jak i problemu geometrycznie nieliniowego w procesie przyrostowym. Otrzymane wyniki w pełni potwierdziły bogate...
-
The effect of nonlinear restraint on torsional buckling and post-buckling behaviour of a thin-walled column
PublicationW pracy rozważa się wyboczenie skrętne i zachowanie pokrytyczne osiowo ściskanego swobodnie podpartego pręta cienkosciennego o przekroju otwartym ze sprężytą nieliniową podporą w środku rozpietości. Rozwiązanie problemu wyznaczono za pomocą metody małego parametru. W przykładzie numerycznym wyznaczono siłę krytyczną i ścieżkę początkowego zachowania pokrytycznego dwuteowego pręta z podporą sprężystą o charakterystyce składającej...
-
Stationarity-Based Approach for the Selection of Lag Length in Cointegration Analysis Used for Structural Damage Detection
Publication -
Chained machine learning model for predicting load capacity and ductility of steel fiber–reinforced concrete beams
PublicationOne of the main issues associated with steel fiber–reinforced concrete (SFRC) beams is the ability to anticipate their flexural response. With a comprehensive grid search, several stacked models (i.e., chained, parallel) consisting of various machine learning (ML) algorithms and artificial neural networks (ANNs) were developed to predict the flexural response of SFRC beams. The flexural performance of SFRC beams under bending was...
-
Briefing: Liquefaction potential of oil-contaminated silty sands
Publication -
Discussion:Horizontal stress increase induced by deep vibratory compaction
PublicationDeep compaction control of granular material using the results of field tests. The analysis include the CPTU and DMT tests terformed before and after compaction works.
-
Mechanical properties of two-stage concrete modified by silica fume
PublicationAbstract. Two-stage concretes, despite the fact that they have proven themselves in various types of construction, have not been studied to the same extent as traditional heavy concretes. Therefore, the article developed the composition of frame concrete with various additives in the composition of the cement-sand mortar. A comparison of the mechanical characteristics of the developed compositions with the addition of silica fume...
-
Modelling of heat and mass transfer through wooden buildings
PublicationThe aim of this review paper is to examine the most recent available studies dealing with theoretical, numerical and experimental aspects related to modelling of heat and mass transfer through wooden buildings. The main thermophysical, mechanical and hygrometric properties of wood are firstly discussed. Then, the basic governing equations of heat and mass transfer phenomena are presented. A detailed description of the physical...
-
A Model for Risk Assessment and Management of Construction Projects in Urban Conditions
PublicationThe authors are seeking new methods for improving the efficiency of the investments associated with the maintenance and operation of existing civil engineering structures. It is demonstrated how the knowledge about the elements of construction and operation phases and their relationships, combined with monitoring data can be used for more effective management of the risks associated with civil engineering projects. The methodology...
-
A novel sandwich footbridge - Practical application of laminated composites in bridge design and in situ measurements of static response
PublicationA novel sandwich composite footbridge is presented in the paper, as an example of practical application of laminated composites in civil engineering. The in situ static load tests of the footbridge before its acceptation for exploitation are shown and discussed. The results are compared with the corresponding ones from a numerical equivalent single layer model of the sandwich structure created within the framework of finite element...
-
Pierwszy w Polsce Międzynarodowy Zabytek Inżynierii Budowlanej - most lisewski przez Wisłę w Tczewie
PublicationW artykule przedstawiono rys historyczny powstania pierwszego stałego mostu drogowo-kolejowego przez Wisłę w Tczewie (1857) oraz jego kolejnych przebudów (1911, 1939, 1945-1972, 2002). Na podstawie przeprowadzonej zabytkoznawczej analizy wartościującej to dzieło pruskiej inżynierii uzasadniono fakt nadania mu w 2004 r. statusu ''International historic civil engineering landmark'' przez American Society of Civil Engineers.
-
IMPROVING THE QUALITY OF EDUCATION THROUGH THE IMPLEMENTATION OF THE DIPLOMAS AND GROUP PROJECTS DURING ENGINEERING STUDIES IN COOPERATION WITH EMPLOYERS
PublicationThe quality of education is one of the most important factors determining the job opportunity for graduates. The authors present the possibility of carrying out the diplomas in cooperation with employers and institutions interested in employment of students who graduated Gdansk University of Technology, Faculty of Civil and Environmental Engineering and University of Warmia and Mazury, Faculty of Geodesy and Land Management (major:...
-
IMPROVING THE QUALITY OF EDUCATION THROUGH THE IMPLEMENTATION OF THE DIPLOMAS AND GROUP PROJECTS DURING ENGINEERING STUDIES IN COOPERATION WITH EMPLOYERS
PublicationThe quality of education is one of most important factors determining the job opportunity for graduates. The authors present the possibility of carrying out the diplomas in cooperation with employers and institutions interested in employment of students who graduated Gdansk University of Technology, Faculty of Civil and Environmental Engineering and University of Warmia and Mazury, Faculty of Geodesy and Land Management (major:...
-
Numerical Simulation of two dimensional flow past a bridge cross section
PublicationThis work presents some numerical results concerning application of CFD in civil engineering problems. Selected theoretical aspects of fluid mechanics are elucidated. In the second part of the paper a cross section of upper footbridge of the Bella Sky Hotel in Copenhagen is analysed numerically in the field of wind action.
-
Experimental tests for the determination of mechanical properties of PVC foil
PublicationThe paper presents an application of the PVC film in civil engineering. Mechanical behaviour of the PVC film applied for suspended ceilings, in the form of a stretch ceiling is investigated under uniaxial and biaxial tensile tests. The study is focused on the determination of mechanical properties from experimental data (uniaxial and biaxial tensile tests). The uniaxial cyclic tests are performed in order to observe a variation...
-
The Idea of Using Adhesive Bonds in Shaping of Cold-formed Thin-walled Beam-columns
PublicationThe chapter concerns the idea of using adhesive bonds in the shaping of cold-formed thin-walled beam-columns. The idea of adhesive-bonded connections is not new but is unlikely to have been used in the design and shaping of thin-walled beam-columns in civil engineering up to date. Metal bar structures, including (due to economic reasons) thin-walled structures, are the most common and effective means to build engineering superstructures/loadbearing...
-
A NEW MASTER'S DEGREE PROGRAM IN GEODESY
PublicationFaculty of Civil and Environmental Engineering (WILiS) at Gdansk University of Technology (GUT) offers studies in the fields of Geodesy and Cartography. The bachelor program (7 semesters) was started ten years ago in 2009. It provides the student with the basic skills and knowledge in the fields of surveying, geodesy and more generally geomatics and cartography. It is strongly related to expertise knowledge of civil building (geodetic...
-
State-of-the-art ideas for engineering laboratory classes – virtual reality framework
PublicationNowadays challenges in science and technology are a driving force in the development of contemporary solutions in education. Virtual reality brings to an edge human imagination. In this paper, authors propose a framework for civil engineering laboratory classes which brings a new quality in this area. The framework shows how to provide learners with an environment where they can realize the health and safety hazards of construction...
-
METHODS OF TEACHING NOISE PROTECTION AT ENVIRONMENTAL ENGINEERING
PublicationNoise strongly influences both our health and behavior in everyday life and as employees or employers. The lost of hearing and other effects of noise on humans result not only in a significant decrease in the quality of life or work efficiency but have also have economic consequences. As noise can be preventable in part by the Environmental Engineers, but it is necessary to introduce them noise issues during their education process....