Search results for: RESEARCH OUTPUT
-
Glossary [Intellectual Output 1] Glossary as a method for reflection on complex research questions
PublicationGlobalization and digitization are strongly influencing the process of shaping the built environment. The latter is causing the new design tools to emerge faster than ever before in history, while the former is speeding up not only the development, but also the broad roll-out of more agile and interdisciplinary methodologies and work approaches. The design process is also becoming more and more inter- and trans-disciplinary. This...
-
Frequency measurement research with weight averaging of pulse output signal of voltage-to-frequency converter
PublicationThe paper presents the essence and investigation of the efficiency of weight averaging of a pulse output signal of voltage-to-frequency converter. The effect of counting and the influence of interference on the result of weight averaging of frequency modulated pulses are analyzed. It is shown that from the point of view of counting error reduction, the best are polynomial weight functions. In the case of high interferences whose...
-
Towards Open Research Data in the Economics Discipline
PublicationNowadays, Open Research Data, as one of the three pillars of Open Science (along with Open Access and Open Scholarly Communication), is gaining enormous attention from different academic and commercial environments. A wide range of scientific disciplines represent and produce different types of data and at the same time, gather different issues and problems in terms of sharing and dissemination research output. This chapter aims...
-
Simulation research on the tool cycle in automated manufacturing system at selected tool duplication levels
PublicationThe paper presents results of the research concerning impact of applied tool exchange rule on the efficiency of an automated manufacturing system. The research consider the tool duplication levels that constrain realisation of a manufacturing process. Presented study was based on the real industrial system data. The operating of the investigated system of manufacture, including tools necessary for its realisation, was modelled...
-
Jarosław Guziński prof. dr hab. inż.
PeopleJaroslaw Guzinski received M.Sc., Ph.D. and D.Sc. degrees from the Electrical Engineering Department at Technical University of Gdansk, Poland in 1994, 2000 and 2011 respectively. Since 2016 he is Associate Professor at Gdansk University of Technology. Currently he is the head of the Department of Electric Drives and Energy Conversion. From 2006 to 2009 he was involved in European Commission Project PREMAID Marie Curie, ‘Predictive...
-
Dataset for a research study on scientific productivity of Polish technical universities (Silesian University Of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.The raw data was retrieved in June 2021 by the SciVal benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles.The most common definition of research productivity...
-
Dataset for a research study on scientific productivity of Polish technical universities (Gdańsk Tech 2016-2020)
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities. The raw data was retrieved in June 2021 by the SciVal benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles. The most common definition of research...
-
Dataset for a research study on scientific productivity of Polish technical universities (Poznań University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Białystok University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Opole University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Lublin University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (University of Bielsko-Biała ATH 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Warsaw University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Rzeszów University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (AGH University of Science and Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Częstochowa University Of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Lodz University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Wrocław University of Science and Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (West Pomeranian University Of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Cracow University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Radom University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Kielce University Of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.
-
Dataset for a research study on scientific productivity of Polish technical universities (Koszalin University of Technology 2016-2020).
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities. The raw data was retrieved in June 2021 by the SciVal benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles. The most common definition of research...
-
Experimental ORC micro-power plant for CHP application Part A: power plant arrangement
PublicationThe co-generative micro-power plant with the HFE7100 applied as a working medium was designed and built for experimental investigations. The heat output of the plant was assumed equal to 20 kW, while the electric output amounted to about 3kW. Examples of the results of the preliminary experimental research on a boiler, heat exchangers, a pump and a turbine-generator set are presented and analysed.
-
Visegrád countries' scientific productivity in the European context: a 10-year perspective using Web of Science and Scopus
PublicationMeasuring the growth of research productivity is a core element of performance in the higher education sector. This paper aims to analyse the scientific productivity of the Visegrád Group countries (2010-2019) based on data from the WoS and Scopus databases as well as data from secondary sources (demographic and socio-economic factors). Quantitatively, although Poland has the highest output, this is due to its comparative size,...
-
Researching Digital Society: Using Data-Mining to Identify Relevant Themes from an Open Access Journal
PublicationOpen Access scholarly literature is scientific output free from economic barriers and copyright restrictions. Using a case study approach, data mining methods and qualitative analysis, the scholarly output and the meta-data of the Open Access eJournal of e-Democracy and Open Government during the time interval 2009–2020 was analysed. Our study was able to identify the most prominent research topics (defined as thematic clusters)...
-
Researching Digital Society: Using Data-Mining to Identify Relevant Themes from an Open Access Journal
PublicationOpen Access scholarly literature is scientific output free from economic barriers and copyright restrictions. Using a case study approach, data mining methods and qualitative analysis, the scholarly output and the meta-data of the Open Access eJournal of e-Democracy and Open Government during the time interval 2009–2020 was analysed. Our study was able to identify the most prominent research topics (defined as thematic clusters)...
-
Experimental research on helical coil biomass boiler with oil as a heating fluid
PublicationThis paper presents an experimental research of helical coil biomass boiler with thermal oil heating agent. Heat exchanger consists of two coaxial helical coils swept by the flue gases. The burner is a single vertical retort connected to the fuel tank (wooden pellets). The boiler is a part of micro-power plant in which the heat from the boiler is exchanged with low-boiling HFE7100 to produce steam for a custom steam turbine. The...
-
Polish Polar Research: Green-and-White Paper under the aegis of the Polish Polar Consortium (PPC)
PublicationPolar research is a colloquial term for cross-area, cross-domain and interdisciplinary research in the Arctic and Antarctic. Polar research is mainly the domain of natural sciences, but technical sciences and humanities also grow in importance. Being vulnerable to climate change, polar regions are commonly considered as a kind of litmus paper of changes in geosystems, hence the importance of research done there. It aims at a better...
-
Inlet air fogging of marine gas turbine in power output loss compensation
PublicationThe use of inlet air fogging installation to boost the power for gas turbine engines is widely applied in the power generation sector. The application of fogging to mechanical drive is rarely considered in the literature [1]. This paper will cover some considerations relating to its application to gas turbines in ship drive. There is an important evaporative cooling potential throughout the world when the dynamic data is evaluated,...
-
How much is Impact Factor worth?
PublicationThe purpose of this work is to present an aspect of counting citations, which is correlated to the Impact Factor, very important for journals in scientific communication, and provides information about the position of a scientific journal in a particular research area. Sometimes citations don’t count in a research output, e.g. if an article is published in a predatory journal. Those journals ...
-
Sensorless Control of Induction Machine Supplied by Current Source Inverter
PublicationThe paper describes the voltage control technique of induction machines supplied by a current source inverter. The control system is based on proposed new multi-scalar variables, which are named “r.” The control system contains the output filter capacitor's model. In the sensorless control system the Z type backstepping speed observer was applied. The mathematical dependences are confirmed by simulation and experimental research.
-
The AC motor voltage and audible noise waveforms in ship’s electrical drive systems with frequency converters
Open Research DataThe presented dataset is part of research focusing on the impact of the ship's electrical drive systems with frequency converters on vibrations and the level of audible noise on ships.
-
Analysis of possible application of high-temperature nuclear reactors to contemporary large-output steam power plants on ships
PublicationThis paper is aimed at analysis of possible application of helium to cooling high-temperature nuclear reactor to be used for generating steam in contemporary ship steam-turbine power plants of a large output with taking into account in particular variable operational parameters. In the first part of the paper types of contemporary ship power plants are presented. Features of today applied PWR reactors and proposed HTR reactors...
-
An analysis of observability and detectability for different sets of measured outputs - CSTR case study
PublicationA problem of proving the observability/detectability at a given measured output for non-linear biochemical systems has been addressed in this paper. A theory of indistinguishable state trajectories has been used to prove the properties of the observability or detectability of this system. It is related to taking system dynamics into consideration depending on initial conditions and the impact of inputs taking into account a given...
-
Systems of Public Higher Education in Poland and Germany. Evidence from Institution Level Data
PublicationThe chapter presents a comparative analysis of public higher education systems (HES) in Germany and Poland. Instead of limiting our study to macro indicators such as gross expenditure on higher education or R&D as per cent of GDP, we draw on the evidence based on micro data especially collected for this study and concerning individual higher education institutions (HEIs). Comparative analysis is based on a sample of 71 public...
-
Problems of modelling toxic compounds emitted by a marine internal combustion engine in unsteady states
PublicationContemporary engine tests are performed based on the theory of experiment. The available versions of programmes used for analysing experimental data make frequent use of the multiple regression model, which enables examining effects and interactions between input model parameters and a single output variable. The use of multi-equation models provides more freedom in analysing the measured results, as those models enable simultaneous...
-
Lamp of adjustable spectrum for photographic usage
PublicationPhotography is a unique rapidly growing interdisciplinary field encompassing aspects of science, art and technology. Expectations of photographers are steadily increasing with the development of technology. One of the areas playing a crucial role in photography is lighting. Consequently, several types of light sources for photographic use have been developed. The ongoing research in this field concentrates on lamps with tunable...
-
Brand loyalty creation in the social network. Does the product category matter?
PublicationThe final goal of all marketers’ effort is to achieve a high level of loyalty toward their brands. Social network brand sites are increasingly attracting the attention of scientists and managers intrigued by their potential application for brand loyalty creation. The aim of this research, based on European sample, is to fill the gap in understanding the product category loyalty and brand loyalty relation as an output of brand identification...
-
The Conceptual Research over Low-Switching Modulation Strategy for Matrix Converters with the Coupled Reactors
PublicationIn this paper, different Pulse Width Modulation (PWM) strategies for operating with a low-switching frequency, a topology that combines Conventional Matrix Converters (CMCs), and Coupled Reactors (CRs) are presented and discussed. The principles of the proposed strategies are first discussed by a conceptual analysis and later validated by simulation. The paper shows how the combination of CMCs and CRs could be of special interest...
-
Diagnostic Analysis of Exhaust Gas with A Quick-Changing Temperature from a Marine Diesel Engine Part II / Two Factor Analysis
PublicationThe article presents a continuation of research carried out to determine the effect of input parameters (changes in engine structure parameters) on selected output parameters (diagnostic measures), based on quickly changing exhaust gas temperature. A method of determining the simultaneous influence of two input factors (the structure parameter and the engine load) on one output factor was presented, as well as an evaluation...
-
Wroclaw University of Technology Knowledge Repository - project objectives
PublicationKnowledge Repository is a project created in the Library and Scientific Information Centre of Wroclaw University of Technology (WrUT). Its main task will be collecting, sharing, and promoting scientific publications of researchers, postgraduates and students of WrUT. It will be also used for bibliometric analysis and reporting research output of WrUT scientific community.Knowledge Repository will closely cooperate with other databases...
-
Comparison of modelling and measurement results of spectra emitted by a programmable lamp
PublicationNowadays artificial light with an optimized spectrum is used in many different applications. For instance, it is widely used in museums and exhibitions to illuminate the art. Moreover, such light stimulates the growth of plants, or can be applied in industry and healthcare. To achieve the best results for each application, the adjusting of a dedicated spectrum is required, which is a complicated task. The ongoing research is focused...
-
Audible noise in ship’s electrical drive systems with frequency converters
Open Research DataThe presented dataset is part of research focusing on the impact of the ship's electrical drive systems with frequency converters on vibrations and the level of audible noise on ships.
-
Application of autoencoder to traffic noise analysis
PublicationThe aim of an autoencoder neural network is to transform the input data into a lower-dimensional code and then to reconstruct the output from this code representation. Applications of autoencoders to classifying sound events in the road traffic have not been found in the literature. The presented research aims to determine whether such an unsupervised learning method may be used for deploying classification algorithms applied to...
-
Problems of modelling toxic compounds emitted by a marine internal combustion engine for the evaluation of its structure parameters
PublicationThe paper presents the possibility of using an analytical study of the engine exhaust ignition to evaluate the technical condition of the selected components. Software tools available for the analysis of experimental data commonly use multiple regression model that allows the study of the effects and iterations between model input quantities and one output variable. The use of multi-equation models gives a lot of freedom in the...
-
Performance improvement of NN based RTLS by customization of NN structure - heuristic approach
PublicationThe purpose of this research is to improve performance of the Hybrid Scene Analysis – Neural Network indoor localization algorithm applied in Real-time Locating System, RTLS. A properly customized structure of Neural Network and training algorithms for specific operating environment will enhance the system’s performance in terms of localization accuracy and precision. Due to nonlinearity and model complexity, a heuristic analysis...
-
Switching Regulation in the Control of 5-Phase Permanent Magnet Synchronous Motor Fed by 3×5 Direct Matrix Converter
PublicationMatrix converter is an AC-AC direct power converter comprising of an array of bi- directional switches. It does not require an intermediate DC-link and allows sinusoidal output waveforms with varying amplitudes and frequencies. The configuration of these bi- directional switches decides the number of inputs and outputs...
-
Experimental investigation of the weight averaging of pulse frequency modulated sensor output signal
Open Research DataThe research aims to practically verify the results of theoretical analysis and simulations of the efficiency of weight averaging of pulse frequency modulated signal. For this purpose, a suitable test stand was built, and the control software in the LabVIEW environment was prepared. Then, a series of experiments were carried out to process and analyze...
-
PROJECT OF AN TDC SIGNAL DISTRIBUTOR PROTOTYPE WITH GAL-VANIC SEPARATION DESTINED FOR STUDIES OF THE BEGINNING OF SELFIGNITION USING LANGMUIR PROBE
PublicationThe knowledge of pistons' TDC is crucial while performing any kind of measurement beneficial to diagnostic inference of a diesel engine. The research of engines under exploitation often cause impartial difficulties with, eg. capability of probe installation. Therefore, it becomes crucial to minimalize those. The paper presents a description of a TDC impulse distributor - divider that provides signal delivery to more than one measurement...