Filters
total: 6246
-
Catalog
displaying 1000 best results Help
Search results for: biomass burning
-
Direct conversion of biomass to nanoporous activated biocarbons for high CO2 adsorption and supercapacitor applications
Publication -
Optimization of Saccharification Conditions of Lignocellulosic Biomass under Alkaline Pre-Treatment and Enzymatic Hydrolysis
PublicationPre-treatment is a significant step in the production of second-generation biofuels from waste lignocellulosic materials. Obtaining biofuels as a result of fermentation processes requires appropriate pre-treatment conditions ensuring the highest possible degree of saccharification of the feed material. An influence of the following process parameters were investigated for alkaline pre-treatment of Salix viminalis L.: catalyst concentration...
-
Conversion of Biomass and Municipal Wastes into Syngas and Hydrogen using Highly Preheated Agent (HTAG)
PublicationGasification is considered to be one of the most promising energy recovery technologies for the widespread utilization of biomass and wastes. During this process raw feedstock is converted into a combustible gas, which can then be burnt to produce thermal energy, or to run engines for mechanical or electrical power. The studies of biomass gasification demonstrate it as a friendly alternative to fossil fuels as one of renewable...
-
Kinetic characterization of hydrogen sulfide inhibition of suspended anammox biomass from a membrane bioreactor
PublicationThe inhibition effects of hydrogen sulfide (H2S) on anammox-enriched biomass from a laboratory membrane reactor were analyzed in a series of batch respirometric experiments. The determined half maximal inhibitory concentration (IC50) was 4.67 mg H2S-S L−1 at the constant pH = 7.0 and the total sulfide concentration varying between 1 and 15 mg TS-S L−1. In another test, the IC50 was found to be 4.25 mg H2S-S L−1 under a constant...
-
Wear of carbide inserts during turning of C45 steel in dry cutting conditions and in presence of emulsion mist
Publication -
Formation of Surface Topography During Turning of AISI 1045 Steel Considering the Type of Cutting Edge Coating
Publication -
Technologia biomems - przegląd zastosowań
PublicationThe paper reviews the issues related to technology, MEMS (Micro-Electro Systems-Mechanical) in the context of applications in biotechnology and biomedical systems. Systems of this type, with applications in biology and medicine, have the name of our common BioMEMS systems. This pertains to a wide range of technology BioMEMS. The aim of this study is to determine future medical MEMS microphones with particular emphasis on their...
-
Clinical Training during the COVID-19 Pandemic: Experiences of Nursing Students and Implications for Education
Publication -
Otrzymywanie spienionych materiałów poliuretanowych z wykorzystaniem biomasy celulozowej
PublicationW niniejszej pracy przedstawiono sposób otrzymywania oraz charakterystykę sztywnych pianek poliuretanowych (SPUR) otrzymanych z biopoliolu uzyskanego w wyniku upłynniania biomasy celulozowej frakcją glicerynową. Opisano również sposób otrzymywania biopoliolu (EP1) jego charakterystykę oraz podstawowe właściwości fizyko-chemiczne. EP1 otrzymano przez upłynnienie biomasy celulozowej w surowej glicerynie wykorzystując H2SO4 jako...
-
Wyznaczanie prędkości opadania złoża biomasy metodą fluorescencji rentgenowskiej
PublicationPromieniowanie jonizujące używane jest powszechnie w przemyśle do uzyskania obrazu radiograficznego. Głównym zastosowaniem przemysłowym badań radiograficznych (RT) są badania nieniszczące (NDT) stosowane głównie do wykrywania nieciągłości wykonawczych i eksploatacyjnych w elementach metalowych oraz badania spoin. Duże zastosowanie badań radiograficznych znajduje się także w analityce chemicznej. Badania opadania złoża w reaktorze...
-
Zwiększenie wydajności hydrolizy enzymatycznej biomasy wskutek obróbki mechanicznej
PublicationWytwarzanie biogazu z biomasy odpadowej i innych odpadów frakcji Bio wymaga zastosowania etapu obróbki wstępnej. W literaturze opublikowano szereg prac związanych z obróbką mechaniczną, fizyczną, fizykochemiczną, chemiczną, a także biologiczną i enzymatyczną surowców o bogatej matrycy związków chemicznych. Na znaczeniu zyskują metody pozwalające jednocześnie uzyskać biopaliwo gazowe, ale także ciekłe produkty depolimeryzacji, które...
-
Ocena emisyjności i środowiskowego bezpieczeństwa napędu rozdrabniaczy biomasy
PublicationOpracowano model matematyczny emisyjności napędu rozdrabniania biomasy wykorzystywanej energetycznie. Wykazano, że możliwe jest utworzenie modelu uwzględniającego środowiskowe bezpieczeństwo eksploatacji i zastosowanie go do analizy, oceny i rozwoju napędu rozdrabniaczy biomasy energetycznej. Określono też jak zmienne sterujące maszyny rozdrabniającej wpływają na bilans i ocenę ekologiczną procesu. Opracowano również autorski wskaźnik...
-
Microbiological Survey in Two Arctic Fjords: Total Bacterial Number and Biomass Comparison of Hornsund and Kongsfjorden
PublicationTwo microbiological parameters: total bacterial number (TBN) and biomass (BBM) were studied in two Arctic fjords: Hornsund and Kongsfjorden. Samples were collected from three sampling points in each fjord, from various water depth layers: from the surface to 75 m depth. Total bacterial number and biomass were examined using the DAPI staining and direct count method. The greater amount of bacteria, as well as highest bacterial biomass...
-
Microbiological Survey in Two Arctic Fjords: Total Bacterial Number and Biomass Comparison of Hornsund and Kongsfjorden
PublicationTwo microbiological parameters: total bacterial number (TBN) and biomass (BBM) were studied in two Arctic fjords: Hornsund and Kongsfjorden. Samples were collected from three sampling points in each fjord, from various water depth layers: from the surface to 75 m depth. Total bacterial number and biomass were examined using the DAPI staining and direct count method. The greater amount of bacteria, as well as highest bacterial biomass...
-
High Temperature Air/Steam Conversion of Biomass and Wastes Into Fuel Gas for Heat and Electricity Production
PublicationPaper present principle of high temperature air/staem gasification as well as some results of research using this technology for conversion of biomass and wastes into fuel gas.
-
Microbiological Survey in Two Arctic Fjords: Total Bacterial Number and Biomass Comparison of Hornsund and Kongsfjorden
Publication -
The Effect of Fertilization on the Structure of the Aboveground Biomass of Several Cultivars of Jerusalem Artichoke (Helianthus tuberosus L.)
Publication -
PAD4, LSD1 and EDS1 regulate drought tolerance, plant biomass production, and cell wall properties
Publication -
Rapeseed Meal Waste Biomass as Single-Cell Protein Substrate for Nutritionally-Enhanced Feed Component
Publication -
Efficiency of Biomass Energy used for Heating Purposes in a Residential Building in Comparison with other Energy Sources
PublicationThis paper discusses the results of analyses investigating the energy efficiency of biomass in comparison with other popular energy carriers used for heating, ventilation and water heating in residential buildings. The compared energy sources were lignite, natural gas, heating oil and electricity produced by conventional and integrated power generation plants. The most efficient variant relying on biomass and the least efficient...
-
Gasification of Densified Biomass (DB) and Municipal Solid Wastes (MSW) Using HTA/SG Technology
PublicationThe necessity of economical and rational use of natural energy sources caused a rapid development of research on the possibilities of using non‐conventional energy resources. Taking the above into account, a new technological process of thermochemical conversion of biomass and communal waste, commonly known as High Temperature Air/Steam Gasification (HTA/SG) and Multi‐Staged Enthalpy Extraction Technology (HTAG‐MEET), was developed....
-
Conversion of waste biomass to designed and tailored activated chars with valuable properties for adsorption and electrochemical applications
PublicationWaste biomass, a renewable energy source, is inexpensive material that has great potential in sorp-tion and electrochemical application. The selected waste materials (corncobs, coconut shells, wal-nuts, and pistachio husks) allow to close the production cycle and enable material recycling, which are important aspects in the hierarchy of waste management. The proposed methodology for pro-duction and activation of biochars can be...
-
Small Scale Gasification of Biomass and Municipal Wastes for Heat and Electricity Production using HTAG Technology
PublicationCombustion and gasification technology utilizing high-cycle regenerative air/steam preheater has drawn increased attention in many application areas. The process is to be realized at temperature level above ash melting point using highly preheated agent. The use of highly preheated media above 900degC provides additional energy to conversion processes and results in considerable...
-
Conversion of waste biomass into activated carbon and evaluation of environmental consequences using life cycle assessment
PublicationIn this article, activated carbon was produced from Lantana camara and olive trees by H3PO4 chemical activation. The prepared activated carbons were analyzed by characterizations such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller, X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared spectroscopy. H3PO4 is used as an activator agent to create an abundant pore...
-
Thermochemical Conversion of Biomass and Municipal Waste into Useful Energy Using Advanced HiTAG/HiTSG Technology
PublicationAn advanced thermal conversion system involving high-temperature gasification of biomass and municipal waste into biofuel, syngas or hydrogen-rich gas is presented in this paper. The decomposition of solid biomass and wastes by gasification is carried out experimentally with a modern and innovative regenerator and updraft continuous gasifier, among others. A ceramic high-cycle regenerator provides extra energy for the thermal conversion...
-
BIOGAS PRODUCTION FROM BAKERY WASTES -DYNAMICS, RETENTION TIME AND BIOGAS POTENTIAL
PublicationThis paper presents results of bakery-waste methane-fermentation. The scope of the study covers the determination of basic physicochemical parameters, process dynamics and retention time as well as biogas composition and biogas efficiency. Methane fermentation process was carried out in accordance with German Standard DIN 38414 S8 and under condition of 38°C. Conclusion: bakery wastes have big potential for biogas production.
-
Lignocellulosic biomass pretreatment - FTIR data
Open Research DataLignocellulosic pretreated biomass has been analysed using FRIT spectroscopy to demonstrate changes occuring in biomass structure
-
An Improved Method of Minimizing Tool Vibration during Boring Holes in Large-Size Structures
PublicationThe paper presents a thoroughly modified method of solving the problem of vibration suppression when boring large-diameter holes in large-size workpieces. A new approach of adjusting the rotational speed of a boring tool is proposed which concerns the selection of the spindle speed in accordance with the results of the simulation of the cutting process. This streamlined method focuses on phenomenological aspects and involves the...
-
KO-FERMENTACJA METANOWA JAKO ALTERNATYWNA METODA ZAGOSPODAROWANIA ZANIECZYSZCZONEJ BIOMASY
PublicationJedną z przyczyn ograniczonego stosowania fitoremediacji jest powstawanie zanieczyszczonej biomasy, dla której wciąż nie opracowano odpowiedniej technologii zagospodarowania lub unieszkodliwiania. W pracy przedstawiono sposób redukcji objętości biomasy, powstającej w wyniku fitoremediacji, metodą fermentacji metanowej. Głównym zagadnieniem jest intensyfikacja produkcji biogazu w procesie ko-fermentacji dwóch lub większej liczby...
-
Przebieg i analiza produktów wolnej i szybkiej pirolizy biomasy
Publicationgraniczone zasoby paliw kopalnych zmuszają do refleksji na temat przyszłości energetyki. Wykorzystywanie do celów energetycznych jedynie, lub w znacznej większości paliw kopalnych nie daje poczucia bezpieczeństwa z powodu braku realnej alternatywy, dlatego ważnym jest poszukiwanie nowych źródeł energii - zielonej, odnawialnej, bezpiecznej. Taką alternatywą może być wykorzystanie drewna po odpowiedniej obróbce - w przypadku poniższej...
-
Biomasa podstawowym źródłem energii odnawialnej w Szwecji. Cz. 1
PublicationPrzedstawiono stopień wykorzystania biomasy do celów energetycznych w Szwecji Pokazano najważniejsze czynniki, które wpłynęły na zwiększenie zużycia biomasy i odegrały znaczącą rolę we wzroście udziału tego paliwa w szwedzkim systemie energetycznym.
-
Możliwości wykorzystania biomasy do produkcji energii na przykładzie Szwecji.
PublicationPrzedstawiono wykorzystanie biomasy do produkcji energii w Szwecji gdzie w1999 roku udział biomasy stanowił 14%. Większa część biomasy jest wykorzystywana w przemyśle drzewnym (63%) oraz jako paliwo w systemach ciepłowniczych (23%). Dominującym rodzajem biomasy jest drewno pochodzące z lasów oraz z przemysłu drzewnego. Znaczący wpływ na wzrost zużycia biomasy miała struktura paliw i polityka podatkowa państwa.
-
Development of a simple biogas analyzer module (BAM) for real-time biogas production monitoring
PublicationAnaerobic digestion (AD) relies on the cooperation of specific microbial communities, making it susceptible to process disruptions that could impact biogas production. In this regard, this study presents a technological solution based on the Arduino platform, in the form of a simple online monitoring system that can track the produced biogas profile, named as biogas analyzer module (BAM). The applicability of the BAM focused on...
-
The study on minimum uncut chip thickness and cutting forces during laser-assisted turning of WC/NiCr clad layers
Publication -
The Evaluation of Phenolic Acids and Flavonoids Content and Antiprotozoal Activity of Eryngium Species Biomass Produced by Biotechnological Methods
Publication -
Synthesis and characterization of biopolyols through biomass liquefaction of wood shavings and their application in the preparation of polyurethane wood composites
PublicationThe sustainability of production systems in wood processing, wood industry, and wooden waste disposal is an important issue for European industry and society. Proper development of products based on renewable wood resources gives an opportunity to provide materials with long-term environmental, social, and economic sustainability. This study aims to establish a new way of forestry and agricultural waste materials utilization by...
-
Multifunctional catalyst-assisted sustainable reformation of lignocellulosic biomass into environmentally friendly biofuel and value-added chemicals
PublicationRapid urbanization is increasing the world's energy demand, making it necessary to develop alternative energy sources. These growing energy needs can be met by the efficient energy conversion of biomass, which can be done by various means. The use of effective catalysts to transform different types of biomasses will be a paradigm change on the road to the worldwide goal of economic sustainability and environmental protection. The...
-
Biomass Production and Removal of Nitrogen and Phosphorus from Processed Municipal Wastewater by Salix schwerinii: A Field Trial
PublicationIn many Baltic regions, short-rotation willow (Salix spp.) is used as a vegetation filter for wastewater treatment and recycling of valuable nutrients to upsurge bioeconomy development. In this context, a four-year field trial (2016–2019) was carried out near a wastewater treatment plant in eastern Finland (Outokumpu) to investigate the effect of the processed wastewater (WW) on biomass production as well as the nutrients uptake...
-
FORECASTING BIOGAS FORMATION IN LANDFILLS
Publication: The aim of the present research was to develop a mathematical model for estimating the amount of viscous gas generated as a function of weather conditions. Due to the lack of models for predicting gas formation caused by sudden changes in weather conditions in the literature, such a model was developed in this study using the parameters of landfills recorded for over a year. The effect of temperature on landfill gas production...
-
Nursing
Journals -
Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel
Publication -
Biomass of macrophytobentos in the Puck Bay in 2010-2018
Open Research DataThe database contains data on qualitative composition and biomass of macrophytobenthos (flower plants and macroalgae) in samples collected in the Puck Bay area (Gulf of Gdańsk, southern Baltic Sea) at 20 stations between 2010-2018. The database contains information on sampling sites (region, geographical coordinates, depth), sample characteristics (date,...
-
Study on the Structure-Property Dependences of Rigid PUR-PIR Foams Obtained from Marine Biomass-Based Biopolyol
Publication -
Insight into the microbial and genetic response of anammox biomass to broad range concentrations of different antibiotics: Linking performance and mechanism
Publication -
Upscaling biomass production of rosmarinic acid-rich hairy root cultures of Agastache rugosa (Fisch. & C.A.Mey.) Kuntze
Publication -
Potential of Waste Biomass from the Sugar Industry as a Source of Furfural and Its Derivatives for Use as Fuel Additives in Poland
Publication -
Processing and characterization of reinforced polyethylene composites made with lignocellulosic fibres isolated from waste plant biomass such as hemp
Publication -
Selective preparation of biomass-derived porous carbon with controllable pore sizes toward highly efficient CO2 capture
Publication -
Improving the prediction of biochar production from various biomass sources through the implementation of eXplainable machine learning approaches
PublicationExamining the game-changing possibilities of explainable machine learning techniques, this study explores the fast-growing area of biochar production prediction. The paper demonstrates how recent advances in sensitivity analysis methodology, optimization of training hyperparameters, and state-of-the-art ensemble techniques have greatly simplified and enhanced the forecasting of biochar output and composition from various biomass...
-
The study on application of biopolyols obtained by cellulose biomass liquefaction performed with crude glycerol for the synthesis of rigid polyurethane foams
PublicationIn this work rigid polyurethane foams (PUR) were obtained by replacement of 0–70 wt% of petrochemical polyol with bio-polyol obtained via cellulose liquefaction in presence of crude glycerol. The foams with different content of a bio-polyol were prepared by single step method for NCO/OH ratio equals 1.5. The prepared materials were analyzed in terms of their morphology, chemical structure, thermal stability and basic physical and...