displaying 1000 best results Help
Search results for: DEVULCANIZATION CONDITIONS
-
The literature review on boundary conditions of use for non-residential buildings
PublicationThis paper describes the results of qualitative and quantitative literature reviews on boundary conditions within educational buildings, emphasising the users' perspective. The reviews were performed before and during the COVID-19 pandemic using Scopus, Taylor& Francis, Web of Science databases. The boundary conditions understood as special characteristics for use and or precondition, determining specific features of buildings...
-
A calibration model for gas sensor array in varying environmental conditions
PublicationAbstract: Gas-analyzing systems based on gas sensors, commonly referred to as electronic noses, are the systems which enable the recognition of volatile compounds in their working environment and provide the on-line results of analysis. The most commonly used type of sensors in such systems is semiconductor gas sensors. They are considered to be the most reliable in the long-term applications (more than 1 year), however,...
-
Influence of electropolymerization conditions on the morphological and electrical properties of PEDOT film
PublicationIn this work the effects of electropolymerization conditions on the morphological properties and conductivity of poly(3,4-ethylenedioxythiophene) (PEDOT) film have been studied. PEDOT films were electrochemically synthesized in a one step process from acetonitrile solution containing 3,4-ethylenedioxythiophene (EDOT) and lithium perchlorate. Based on atomic force microscopy, scanning electron microscopy, cyclic voltammetry and...
-
Model Order Reduction for Problems With Dispersive Surface Boundary Conditions
PublicationThis letter proposes a new scheme for reduced-order finite-element modeling of electromagnetic structures with nonlinear, dispersive surface boundary conditions, which optimally exploits the numerically stable and efficient MOR framework for second-order systems provided by SAPOR method. The presented results of numerical experiments for an example of a waveguide filter demonstrate the superior accuracy of the resulting reduced models...
-
Conditions of Best Practice Transfer - Results of the Quick IGA Project
PublicationThe Quick IGA project supports the development of working and organizational structures in SMEs in order to increase the employment rate of women and elderly and concurrently increases innovation capacities. One of the main project’s tasks was to find best practices from SMEs in Nordic countries in that field (in the first step) and identify (in second step) possibilities and conditions of their implementation in SMEs in other...
-
Auto adaptation of mobile device characteristics to various acoustic conditions
PublicationThe proposed methodology of auto adaptation of the mobile device characteristics to various acoustic conditions is presented in the paper. The first goal of this study was to determine the parameters of the acoustic path of the mobile device, for both transmitting (speaker) and receiver (microphone). Results of the measurement of characteristics of mobile devices were presented. Information about characteristics of individual parts...
-
Quantitative risk assessment of new ship designs in damage conditions
PublicationThe paper is devoted to safety of ships in damage conditions. The novel contribution of the paper is connected with a new Multi-Task ship (MT-ship) design at the preliminary stage of design. There are a few problems at the preliminary stage that should be considered. One problem is connected with if the quantitative risk-based method is a reliable and formal method for safety assessment of such the new design (MT-ship) in damage...
-
A calibration model for gas sensor array in varying environmental conditions
PublicationAbstract: Gas-analyzing systems based on gas sensors, commonly referred to as electronic noses, are the systems which enable the recognition of volatile compounds in their working environment and provide the on-line results of analysis. The most commonly used type of sensors in such systems is semiconductor gas sensors. They are considered to be the most reliable in the long-term applications (more than 1 year), however,...
-
Material for Automatic Phonetic Transcription of Speech Recorded in Various Conditions
PublicationAutomatic speech recognition (ASR) is under constant development, especially in cases when speech is casually produced or it is acquired in various environment conditions, or in the presence of background noise. Phonetic transcription is an important step in the process of full speech recognition and is discussed in the presented work as the main focus in this process. ASR is widely implemented in mobile devices technology, but...
-
On continuity conditions at the phase interface of two-phase elastic shells
PublicationW pracy rozwinięto ogólną nieliniową teorię powłok sprężystych podlegających przejściom fazowym typu martenzytowego. Przedstawione sformułowanie oparte jest na statycznie i kinematycznie ścisłym modelu powłokowym. Uwzględniono gęstośc energii odkształcenia, jak również siły i momenty zadane wzdłuż krzywoliniowego przejścia fazowego. W szczególności otrzymano statyczne warunki ciągłości wzdłuż koherentnego połączenia oraz połączenia...
-
The Effect of Welding Conditions on Diffusible Hydrogen Content in Deposited Metal
PublicationThe article presents the results of a literature survey and preliminary tests which set out effects of welding conditions on the amount of diffusible hydrogen in deposited metal. Experiments were conducted by using rutile coated electrodes which generate high contents of diffusible hydrogen in deposited metal. The amount of diffusible hydrogen was determined by a glycerin test.Eleven factors were considered: the electrode angle,...
-
Temper bead welding of S460N steel in wet welding conditions
PublicationWet welding is the most common method of welding in water environment. It is most often used for repairing of underwater parts of offshore structures. However, the water as a welding environment causes an increase of susceptibility of steels to cold cracking. For underwater constructions high strength low alloy (HSLA) steel are widely used. In wet welding condition a HSLA steel is characterized by high susceptibility to cold cracking....
-
A Model for Risk Assessment and Management of Construction Projects in Urban Conditions
PublicationThe authors are seeking new methods for improving the efficiency of the investments associated with the maintenance and operation of existing civil engineering structures. It is demonstrated how the knowledge about the elements of construction and operation phases and their relationships, combined with monitoring data can be used for more effective management of the risks associated with civil engineering projects. The methodology...
-
Manganese Phosphatizing Coatings: The Effects of Preparation Conditions on Surface Properties
PublicationManganese phosphate coating could be used to protect the surface of steel products. However, it is essential to determine the effects which process parameters, as well as the types of additives used, have on the efficiency of coating deposition. Thus, we present here a process of phosphatization of low-alloy steel (for 15 min at 95 ◦C) in manganese/nickel baths followed by a passivation process with the use of a silicon and zircon...
-
Performance of microbial fuel cells operated under anoxic conditions
PublicationNowadays, microbial fuel cells (MFC) stand up as a promising renewable energy source. Due to the ability of the MFC to oxidize a wide spectrum of substrates, wastewater seems to be one of the most interesting fuels. Unfortunately, wastewater could contain electron acceptors such as nitrate, which could interfere with the electrical performance of the MFC. In this work, the influence of oxidised nitrogen forms on the electricity...
-
On Non-holonomic Boundary Conditions within the Nonlinear Cosserat Continuum
PublicationWithin the framework of the nonlinear micropolar elastic continuum we discuss non-holonomic kinematic boundary conditions. By non-holonomic boundary conditions we mean linear relations between virtual displacements and virtual rotations given on the boundary. Such boundary conditions can be used for modelling of complex material interactions in the vicinity of the boundaries and interfaces.
-
The Accuracy of a Marine Satellite Compass under Terrestrial Urban Conditions
PublicationWhen used at sea, satellite compasses are capable of determining the course of a sailing vessel with high accuracy. It is dicult to verify the accuracy declared by the device manufacturer under such conditions, as it is dicult to define a reliable reference. This study analyses the accuracy of the satellite compass in an urban setting, with the satellite signal being obscured to various extents. It is an important point in the...
-
Effect of boundary conditions in shear testers on properties of bulk solids.
PublicationPrzedstawiono wpływ warunków brzegowych w dwóch różnych aparatach ścinania na wielkość odkształceń i naprężeń. Obliczenia wykonano przy zastosowaniu metody elementów skończonych i mikropolarnego prawa hipoplastycznego.
-
Computational modelling of concrete behavior under static and dynamic conditions
PublicationW artykule zaproponowano wyniki obliczeń MES dla betonu podczas dynamicznego obciążenia. Przyjęto model sprężysto-plastyczno-lepki z nielokalnym osłabieniem. Obliczenia MES dla elementów betonowych pod obciążeniem dynamicznym o różnej prędkości obciążenia porównano bezpośrednio z doświadczeniami.
-
International Journal of Condition Monitoring
Journals -
Influence of Property Division on the Technical Condition of a Building
PublicationIn this article, the correlation between a technical condition of a building and property division is analyzed and assessed. In the course of the usage of a building, the process of its degradation and the increase in the demands of property occupants can be observed. There is a direct connection between the difficult technical condition of a building and the fragmentation of the ownership structure. Although not considered in...
-
Emergency condition of the ceramic facade of a residential building
PublicationThe paper presents a description of the technical condition of the ceramic cladding of a residential building, the technical condition of which deteriorated significantly after only a few years of operation. The analysis of the influence of the applied design and working solutions on the façade failure frequency was analyzed. The article presents a conceptual solution to bring the building to the proper technical condition in terms...
-
Emergency condition of the ceramic facade of a residential building
PublicationThe paper presents a description of the technical condition of the ceramic cladding of a residential building, the technical condition of which deteriorated significantly after only a few years of operation. The analysis of the influence of the applied design and working solutions on the façade failure frequency was analyzed. The article presents a conceptual solution to bring the building to the proper technical condition in terms...
-
Going into the research of dampers configuration for bodies under double load conditions.
PublicationJednym z etapów projektowania układów mechanicznych jest dobranie wartości sztywności i tłumienia elementów i dopasowanie ich do planowanego zachowania mechanizmu. Proces ten można uprościć, gdy uda się połączyć komputerowe modelowanie mechanizmów i optymalizację numeryczną. W pracy zajęto się doborem elementów tłumiących. Zaproponowano optymalne ustawienie oraz optymalne wartości współczynników dla układów stabilizujących położenie...
-
Estimation of the short-term predictor parameters of speech under noisy conditions
Publication -
The Fluoride Content of Yerba Mate Depending on the Country of Origin and the Conditions of the Infusion
Publication -
Image normalization method for face identification under difficult lighting conditions
PublicationW pracy przedstawiono nową metodę normalizacji obrazu, opartą o proste techniki, takie jak binaryzacja czy wyrównywanie histogramu, która pozwala na skuteczne wyeliminowanie cieni oraz uzyskanie niezmienników znacznie poprawiających dokładność procesu rozpoznawania twarzy. Podczas wykonanych eksperymentów zaproponowana metoda uzyskała wyniki lepsze od referencyjnego algorytmu wykorzystującego anizotropowe wygładzanie.
-
Use of waste heat to improve the conditions of the piston engines start up
PublicationZespoły prądotwórcze z tłokowymi silnikami spalinowymi są obecnie powszechne stosowane jako awaryjne źródła energii elektrycznej albo elektrownie uzupełniające niedobory energii czy stabilizujące częstotliwość. Ich czas rozruchu powinien być krótki - poniżej 5 minut w przypadku dużych mocy. Zużycie silnika, zużycie paliwa i emisji spalin są silnie uzależnione od stanu cieplnego przed rozruchem. Przedstawiono pomiary laboratoryjne...
-
Influence of type of material on performance of hydraulic components in thermal shock conditions
PublicationDuring the start-up of a hydraulic system in low ambient temperatures an incorrect operation may occur. The principles and conditions of safely operating hydraulic driven machines and devices are essential to designers and operators. For this reason the author of this article has conducted a series of tests on hydraulic components and systems in thermal shock conditions (cooled-down components were supplied with hot working medium)....
-
The effects of growth conditions on superconducting properties of Nd1Ba2Cu3O7-ë single crystals.
PublicationW pracy przedstawiono rezultaty badan wpływu warunków wzrostu kryształów Nd1Ba2Cu3O7-d na ich własności nadprzewodzące. Kryształy hodowano metodą spontanicznego wzrostu z fazy ciekłej. Mikrostruktura kryształów została zbadana skaningowym mikroskopem elektronowym oraz skaningowym mikroskopem tunelowym. Własności nadprzewodzące badano przeprowadzając pomiary momentu magnetycznego w funkcji temperatury.W przypadku badanych kryształów...
-
Features of ammonium-ions sorption by natural zeolites under dynamic conditions.
PublicationW pracy przedstawiono: charakterystykę naturalnych zeolitów, obszar ich praktycznego wykorzystania w zakresie adsorpcyjnego usuwania niektórych zanieczyszczeń z wód oraz wyniki badań procesu adsorpcji jonów amoniowych z wodnych roztworów modelowych (w układzie dynamicznym) na wybranych zeolitach naturalnych.
-
Samoilenko`s method to differential algebraic systems with integral boundary conditions.
PublicationProblemy różniczkowo-algebraiczne z warunkami brzegowymi (typu całkowego) są przedmiotem badań. Zastosowano metodę Samoilenki w powiązaniu z metodą porównawczą. O prawych stronach zagadnienia zakładano, że spełniają warunek Lipschitza oraz promień spektralny odpowiedniej macierzy jest mniejszy od 1.Podane zostały warunki dostateczne na istnienie rozwiązania omawianego zagadnienia.
-
Experimental and Numerical Investigations of the Effect of Curing Conditions on the Temperature Rise of Concrete
PublicationThis paper presents experimental and numerical studies investigating the impact of three curing conditions on temperature evolution in concrete cubes. The tests were performed on samples of the same volume (3.375 dm3) under different curing conditions: room temperature, insulation boxes, and adiabatic calorimeter. Various cements (Portland cement, Portland composite cement, and blast furnace slag cement) and aggregates (gravel...
-
Sulfate reducing ammonium oxidation (SULFAMMOX) process under anaerobic conditions
PublicationSulfate (SO42-) can be an electron acceptor for ammonium nitrogen (NH4+) oxidation under anaerobic conditions. The process is known as sulfammox and can be a viable alternative to conventional, nitrite (NO2-) dependent, anammox. Two bacterial species, including Bacillus Benzoevorans and Brocadia Anammoxoglobus Sulfate, can perform that process. With sulfammox, an economically inefficient pre-nitration step (due to aeration) is...
-
Investigation of Acoustic Properties of Poroelastic Asphalt Mixtures in Laboratory and Field Conditions
PublicationMeasures for the improvement of acoustic conditions in the vicinity of roads include the construction of pavement structures with low-noise surfaces with optimal macrotexture and the highest possible sound absorption coefficient. Laboratory evaluation of acoustic properties of a designed asphalt mixture before its placement in the pavement is a good solution. Currently, the most popular method for the determination of the sound...
-
On the exact equilibrium conditions of irregular shells reinforced by beams along the junctions
PublicationThe exact, resultant equilibrium conditions for irregular shells reinforced by beams along the junctions are formulated. The equilibrium conditions are derived by performing direct integration of the global equilibrium conditions of continuum mechanics. New, exact resultant static continuity conditions along the singular curve modelling reinforced junction are presented. The results do not depend on shell thickness, internal through-the-thickness...
-
Effect of welding conditions on susceptibility to cold cracking of underwater welded joints
PublicationPrzedstawiono wybrane aspekty spawalności stali przy spawaniu pod wodą metodą lokalnej komory suchej. Zwrócono szczególną uwagę na skłonność do tworzenia peknięć zimnych w SWC. Przy pomocy planowania doświadczeń określono ilościowy wpływ parametrów spawania na naprężenia krytyczne z próby implant.
-
Problems of functioning of the insurance services market in the conditions of COVID-19 distribution
Publication -
Effect of citric acid esterification conditions on the properties of the obtained resistant starch
Publication -
Effect of Storage Conditions on Storability and Antioxidant Potential of Pears cv. ‘Conference’
Publication -
Revealing the epigenetic effect of temozolomide on glioblastoma cell lines in therapeutic conditions
Publication -
Determination of Stent Load Conditions in New Zealand White Rabbit Urethra
Publication -
Methods of material parameters identification for isotropic damage in viscoplastic flow conditions
PublicationW pracy zaprezentowano trzy metody identyfikacji parametrów materiałowych dla izotropowego zniszczenia w warunkach lepkoplastycznego płynięcia. Przedstawiono wyniki identyfikacji dla dwóch stopów aluminium, które następnie zweryfikowano porównując wyniki symulacji numerycznych z wynikami eksperymentalnymi.
-
Factors Shaping the Working Environment, Living Conditions and Recreation on Board Ship
PublicationA seagoing ship is a working place, an accommodation space and a recreation area at the same time. Being exposed to harsh physical conditions, it must satisfy different requirements. The human organism and its qualities become a point of reference here; consequently, the functions and spatial arrangement and interiors of a ship must be subordinated to its needs. The organisation of the space in contemporary ships meant for human...
-
Selection of the UV irradiation conditions for accelerated edible oil oxidation procedure.
PublicationCelem badań było dobranie optymalnych warunków etapu naświetlania olejów roślinnych z zastosowaniem promieniowania ultrafioletowego. Dobrano powierzchnię naświetlania i grubość filmu oleju, a także odległość próbki oleju od źródła światła i moc promieniowania ultrafioletowego.Lotne produkty utleniania izolowano przy pomocy mikroekstrakcji do fazy stacjonarnej i rozdzielano z zastosowaniem chromatografii gazowej z detektorem płomieniowo-jonizacyjnym.
-
New components for hydraulic drive systems and their performance in thermal shock conditions
PublicationArtykuł prezentuje konstrukcję pomp z rozrządem krzywkowym typu PWK o zmiennej wydajności wraz ze wstępnymi wynikami badań prototypu PWKZ-78. Przedstawiono także wstępne wyniki analiz MES i CFD zjawisk zachodzących w pracującej pompie. W drugiej części zaprezentowano metodykę badań zachowania się pomp w warunkach szokutermicznego i wyniki uzyskane dla pompy typu PWK.
-
The effect of improved cutting conditions of the circular saw blade on precision of cutting
PublicationW pracy przedstawiono analizę i wyniki badań doświadczalnych dokładności przecinania na dwuwrzecionowej pilarce tarczowej. W warunkach przemysłowych badano piły starej (typ "Multix") i nowej konstrukcji podczas przecinania pryzm ze zmrożonego drewna brzozowego. Ponadto, określono wpływ kinematyki układu przecinania na uzyskiwaną dokładność przecinania.
-
Electrical properties of Y0.08Sr0.92Ti0.92Nb0.08O3_−delta after reduction in different reducing conditions
PublicationPraca przedstawia badania właściwości elektrycznych perowskitów Y0.08Sr0.92Ti0.92Nb0.08O3−ı redukowanych w różnych warunkach termicznych. Obserwowano wysoką przewodność elektryczną próbek redukowanych w atmosferze amoniaku. Przewodność Y0.08Sr0.92Ti0.92Nb0.08O3−ı redukowanego w amoniaku w 1500 ◦C była rzędu 600 S/cm w 200 ◦C. Przewodność elektryczna próbek redukowanych w amoniaku w 1500 ◦C była stabilna zarówno w atmosferze wodoru...
-
Isotropic damage in viscoplastic flow conditions, fem applications with practical examples
PublicationW pracy omówiono niektóre zagadnienia zniszczenia w warunkach płynięcia lepkoplastycznego. Podano podstawowe prawa konstytutywne jakie mogą tu być zastosowane oraz sposoby identyfikacji parametrów materiałowych. Pokazano przykład zastosowania.
-
Cavitation wearing of the SUPERSTON alloy after laser treatment at cryogenic conditions
PublicationThe purpose of this paper is to demonstrate the method of laser remelting at cryogenic conditions of the SUPERSTON alloy and its influence on microstructure and cavitation wearing. The cavitation test was performed using the rotating disc facility in IPM PAN Gdansk. During the cavitation test, the mass loss of the material with different parameters of laser remelting was determined. Surface and cross-section microstructure of the...