Publications
Filters
total: 334
Catalog Publications
Year 2022
-
Limits of enhanced of macro- and meso-scale continuum models for studying size effect in concrete under tension
PublicationThe paper investigates a mechanical quasi-static size effect in concrete during splitting tension at the macro- and meso-level. In experiments, five different diameters of cylindrical concrete specimens were tested. Twodimensional plane strain finite element (FE) simulations were carried out to reproduce the experimental size effect. The size effect in experiments by Carmona et al. was also simulated. Two enhanced continuum concrete...
-
Influence of Water-Induced Degradation of Polytetrafluoroethylene (PTFE)-Coated Woven Fabrics Mechanical Properties
PublicationThe impact of water-induced degradation on the mechanical properties of the chosen two PTFE-coated, glass threads woven fabrics is investigated in this paper. The paper begins with a survey of literature concerning the investigation and determination of coated woven fabric properties. The authors carried out the uniaxial tensile tests with an application of flat and curved grips to establish the proper values of the ultimate tensile...
-
Influence of the Shear Cap Size and Stiffness on the Distribution of Shear Forces in Flat Slabs
PublicationThe scope of this paper is to investigate analytically and numerically the influence of shear cap size and stiffness on the distribution of shear forces in flat slabs in a slab–column-connections-reinforced concrete structure. The effect of support (shear cap) stiffness on the calculation of the length of the shear control perimeter according to the available methods is presented. Based on the analysis, the authors indicate in...
-
Analiza możliwości rozwoju Mieszkalnych Obiektów Pływających (MOP) w aspekcie czynników środowiskowych
PublicationW publikacji przestawiono wyniki badań dotyczących możliwości rozwoju Mieszkalnych Obiektów Pływających (MOP), popularnie nazywanych Domami Na Wodzie (DNW) z uwzględnieniem wpływu czynników środowiskowych. Badanie potencjalnych kierunków rozwoju MOP w aspekcie czynników środowiskowych przeprowadzone zostało z zastosowaniem metody Scenariuszy Stanów Otoczenia dla scenariusza optymistycznego, pesymistycznego i najbardziej prawdopodobnego....
Year 2021
-
Uszkodzenia pożarowe dachu budynku kościoła pw. Świętych Apostołów Piotra i Pawła
PublicationW artykule przedstawionopsi działń podjętych po pożarze dachu zabytkowego Kcioła pw. Świętych Apostołów Piotra i Pawła w Gdańsku
-
Structural analysis as a supporting method for the research of the medieval brick architecture
PublicationChronology of brick historical buildings might be established much more precisely than the chronology of stone ones due to the architectural and metrical analysis of bricks, mortars and brickworks. Comparison of historical sources allows to reconstruct the previous stages of constructing monuments. Causations between transformations and developments of monuments are usually interpreted as the results of artistic or ideological...
-
Shear fracture of longitudinally reinforced concrete beams under bending using Digital Image Correlation and FE simulations with concrete micro-structure based on X-ray micro-computed tomography images
PublicationThe paper presents experimental and numerical investigations of the shear fracture in rectangular concrete beams longitudinally reinforced with steel or basalt bar under quasi-static three point bending. Shear fracture process zone formation and development on the surface of beams was investigated by Digital Image Correlation (DIC) whereas thorough analyses of 3D material micro-structure, air voids, width and curvature of shear...
-
Rewitalizacja posadzek betonowych typu lastrico w obiektach zabytkowych. Część 2
PublicationW artykule przedstawiono zagadnienia materiałowe i technologiczne dotyczące posadzek typu lastrico w aspekcie oceny ich stanu technicznego oraz sposobów naprawy i rewitalizacji. Tekst stanowi kontynuacje artykułu zamieszczonego w Builder Science3 nr 9/2021
-
Rewitalizacja posadzek betonowych typu lastrico w obiektach zabytkowych. Część 1
PublicationW artykule przedstawiono zagadnienia materiałowe i technologiczne dotyczące posadzek typu lastrico w aspekcie oceny ich stanu technicznegooraz sposobów naprawy i rewitalizacji.
-
Przegląd rozwiązań systemowych łączników balkonowych
PublicationW artykule zamieszczono przegląd aktualnie stosowanych na rynku łączników balkonowych, przeprowadzono szczegółową analizę ich zalet i wad, ze szczególnym uwzględnieniem aspektów wytrzymałościowych oraz izolacyjności termicznej
-
OCENA NOŚNOŚCI STAREGO MOSTU ŁUKOWEGO W JAGODNIKU
PublicationArtykuł opisuje przeprowadzoną analizę statyczno-wytrzymałościowa 95-letniego betonowego mostu łukowego zlokalizowanego w Jagodniku w północnej Polsce. Trwałość i wytrzymałość starego betonu są określane na podstawie wybranych właściwości mechanicznych, fizycznych i chemicznych. Program badań laboratoryjnych składał się z następującego zestawu badań: pomiary głębokości strefy skarbonatyzowanej i gęstości w stanie suchym, badania...
-
Model-Based Adaptive Machine Learning Approach in Concrete Mix Design
PublicationConcrete mix design is one of the most critical issues in concrete technology. This process aims to create a concrete mix which helps deliver concrete with desired features and quality. Contemporary requirements for concrete concern not only its structural properties, but also increasingly its production process and environmental friendliness, forcing concrete producers to use both chemically and technologically complex concrete...
-
Mechanical Performance and Environmental Assessment of Sustainable Concrete Reinforced with Recycled End-of-Life Tyre Fibres
PublicationThe presented research’s main objective was to develop the solution to the global problem of using steel waste obtained during rubber recovery during the tire recycling. A detailed comparative analysis of mechanical and physical features of the concrete composite with the addition of recycled steel fibres (RSF) in relation to the steel fibre concrete commonly used for industrial floors was conducted. A study was carried out using...
-
Measurements of Thermal Conductivity of LWC Cement Composites Using Simplified Laboratory Scale Method
PublicationThe implementation of low-energy construction includes aspects related to technological and material research regarding thermal insulation. New solutions are sought, firstly, to reduce heat losses and, secondly, to improve the environment conditions in isolated rooms. The effective heat resistance of insulating materials is inversely proportional to temperature and humidity. Cement composites filled with lightweight artificial...
-
Load capacity of steel-aluminium brackets under static and cyclic laboratory tests
PublicationThe aim of the research is the laboratory investigation of steel-aluminium brackets employed to fasten lightweight curtain walls to building facilities. Static pressure, suction forces, and cyclic loads parallel to end plates (horizontal – to simulate wind influence) were applied in the study. The steel-aluminium brackets were tested on a reinforced concrete substrate made of C30/37 concrete class to simulate the real working conditions....
-
Influence of effective width of flange on calculation and reinforcement dimensioning of beam of reinforced concrete frame
PublicationThe paper analyses the influence of modelling the cross-section of a beam in two-storey reinforced concrete frame of industrial warehouse with dimensions: 18.0 m × 32.0 m using bar elements on the results of bending moments, the value of elastic deflection and the dimensioning of reinforcement due to bending. Six options were considered: a beam as a rectangular section and five T-beam variants with different definitions of effective...
-
Improvement of the Chimney Effect in Stack Ventilation
PublicationThe article is focused on the airflow in a ventilation system in a building. The work examines the methods which enhance the chimney effect. In this paper, three cases with different chimneys were analyzed for the full-scale experiment. These cases were characterized by different geometrical and material parameters, leading to differences in the intensity of the ventilation airflow. The common denominator of the cases was the room...
-
Finite element analysis on failure of reinforced concrete corner in sewage tank under opening bending moment
PublicationW artykule omówiono mechanizm uszkodzenia żelbetowego zbiornika ściekowego w narożniku ściany, który uległ uszkodzeniu podczas próby wypełnienia na skutek nadmiernych przemieszczeń poziomych ścian pod wpływem otwierającego momentu zginającego. Aby wyjaśnić przyczyny awarii, przeprowadzono kompleksowe obliczenia metodą elementów skończonych (MES) żelbetowego zbiornika w warunkach odkształcenia płaskiego. Beton zamodelowano za pomocą...
-
Enviromental factors az the elements determingthe development of floating homes
PublicationThe popularity of Floating Homes in Western Europe and North America is noticeable. The interest in thesefacilities in Poland is also constantly growing. The popularity of Floating Homes is due to climate change, risingland prices and population density in city centers. However, environmental factors play a significant role in theirdevelopment. The publication presents the results of research on the impact of environmental factors...
-
Chemical, Physical, and Mechanical Properties of 95-Year-Old Concrete Built-In Arch Bridge
PublicationThis research aimed to determine the durability and strength of an old concrete built-in arch bridge based on selected mechanical, physical, and chemical properties of the concrete. The bridge was erected in 1925 and is located in Jagodnik (northern Poland). Cylindrical specimens were taken from the side ribs connected to the top plate using a concrete core borehole diamond drill machine. The properties of the old concrete were...
-
Charakterystyka materiałowo-technologiczna oraz proces degradacji posadzek betonowych typu lastrico
PublicationW artykule przedstawiono wybrane zagadnienia materiałowe i technologiczne dotyczące posadzek typu lastrico. Opisany został proces degradacji warstwy wierzchniej posadzki lastrico. Szczególną uwagę zwrócono na wpływ specyfiki tego rodzaju posadzki na sposób oceny ich stanu technicznego.
-
Case study of water vapour transmission properties of EPDM façade membranes
PublicationThis research aimed to investigate the water vapour transmission properties of chosen EPDM membranes applied in façade and window systems under laboratory tests. The applied procedure included in national and international standards utilized for the laboratory tests of water vapour transmission properties of EPDM membrane is described. Two main types (outside and inside types) of EPDM membranes are laboratory tested. The authors...
-
Błedy realizacji prac remontowych przyczyną uszkodzeń wilgotnościowych zabytkowego budynku sali BHP w Gdańsku
PublicationW artykule przedstawiono opis uszkodzeń wilgotnościowych występujących w historycznym budynku sali VBHP w Gdańsku po zakończeniu prac związanych z jego remonem opraz opisano zakres podjętych prac naprawczych
-
Biomass in biogas production: Pretreatment and codigestion
PublicationGlobally, there is increasing awareness that the implementation of ‘waste to energy’ technology is one of the best means to achieve sustainable energy development. The most popular approach is the conversion of organic-rich compounds into clean and renewable products by anaerobic digestion (AD). Biogas can be produced from agricultural residues, municipal/industrial biowastes, and sustainable biomass, especially materials that...
-
Application of advanced spectroscopic methods in the assessment of the leachability degree of hazardous elements from the matrix of cellular concretea
PublicationDue to its structure, autoclaved cellular concrete exhibits good insulating properties with relatively high compressive strength values. It is increasingly used in construction because of its economic attractiveness. Autoclaved cellular concrete is mainly used in interior structure layers, and therefore its potential exposure to heavy metal leaching from the matrix may be related to the presence of a high pH medium from other materials...
-
Analytical approach for membrane action in laterally-restrained reinforced concrete square slabs under uniformly distributed loads
PublicationLaterally-restrained reinforced concrete slabs can mobilise compressive membrane action and subsequent tensile membrane action under extreme loading conditions, thereby enhancing the load resistance under uniformly distributed loads. Previous analytical study focuses primarily on tensile membrane action in simply-supported slabs. This paper describes an analytical approach for membrane action in laterally-restrained square slabs....
-
Analiza obudowy wykopu dla budynku z kondygnacją podziemną
PublicationW pracy poruszono tematykę analizy obudowy wykopu dla budynku z jedną kondygnacją podziemną, zlokalizowanego w gęstej zabudowie śródmiejskiej. Obliczenia przeprowadzono za pomocą dwóch programów obliczeniowych: GEO5 (moduł: Ściana analiza) i Autodesk Robot Structural Analysis Professional. Całość wyników podsumowano, a wnioski sformułowano w odniesieniu do obecnej sytuacji na rynku budowlanym, charakteryzującej się coraz to trudniejszymi...
-
A 95-Year-Old Concrete Arch Bridge: From Materials Characterization to Structural Analysis
PublicationThe structural analysis of a 95-year-old concrete arch bridge located in Jagodnik (Poland) is performed in this paper, in order to check its behavior under today’s traffic loads. The mechanical properties of both the concrete and the reinforcement are investigated by testing cores and bar stubs extracted from the bridge. Structural analysis confirms that the bridge meets today’s load requirements in terms of bearing capacity, serviceability...
Year 2020
-
Zakres stosowania tynków
PublicationW artykule podano podział tynków zwykłych ze względu na technikę wykonania, zalecane własności zapraw tynkarskich dla różnych tynków oraz klasyfikacjęwłaściwości suchych mieszanek tynkarskich
-
Wybrane zagadnienia projektowania, wykonawstwa oraz użytkowania betonowych posadzek przemysłowych w aspekcie ich ścieralności
Publicationw artykule przedstawiono najczęściej spotykane problemy związane z projektowaniem, realizacją oraz późniejszą eksploatacją posadzek w aspekcie ich ścieralności
-
Wstępne badania eksperymentalne stalowych łączników balkonowych w aspekcie nośności złącza balkon - strop
PublicationW artykule przedstawiono analizę oraz wyniki wstępnych badań eksperymentalnych prefabrykowanych zestawów balkonowych w naturalnej skali o wymiarach (szerokość × długość × wysokość): 2,0 m × 2,78 m × 0,186 m (w spadku do 0,17 m) składających się z żelbetowych płyt połączonych ze sobą za pomocą stalowych łączników balkonowych w dwóch różnych typach rozwiązania. Ponadto artykuł zawiera przegląd literatury oraz przykładowych rozwiązań...
-
Wpływ błędów projektowych, wykonawczych oraz sposobu eksploatacji na trwałość podłóg przemysłowych
PublicationCelem artykułu jest wskazanie najczęściej popełnianych błędów przy projektowaniu podłóg przemysłowych. Artykuł stanowi częśc 1 serii publikacji. Artykuł ma charakter studium przypadku i został ograniczony do wybranych przypadków z praktyki inżynierskiej
-
Wpływ błędów projektowych, wykonawczych oraz sposobu eksploatacji na trwałość podłóg przemysłowych
PublicationW artykule przedstawiono syntetyczna analizę przyczyn obniżonej trwałośc ibetonowych posadzek przemysłowych. Podano inżynierskie spsobu usuwania usterek i uszkodzeń będących następstwem niedociągnięć i błędów projektowych, wykonawczych, jak również niewłaściwego sposobu eksploatacji
-
Uwarunkowania użytkowania podłóg przemysłowych . Błędy wykonawcze
PublicationCelem artykułu jest wskazanie błędów najczęściej popełnianych w trakcie realizacji podłóg przemysłowych. Podobnie jak błędy projektowe maja one wpływ na powstawanie usterek i uszkodzeń zarówno przed, jak również w okresie eksploatacji podłóg przemysłowych. Artykuł ma charakter studium przypadku i został ograniczony do wybranej sytuacji z praktyki inżynierskiej
-
Uwarunkowania użytkowania podłóg przemysłowych - Błędy projektowe
PublicationCelem artykułu jest wskazanie błędów popełnianych najczęściej przy projektowaniu podłóg przemysłowych. Opisane błędy mają wpływ na powstanie usterek i uszkodzeń zarówno przed, jak i w okresie ich eksploatacji.
-
Tynki - wykonywanie i pielęgnacja
PublicationW artykule przedstawiono podstawowe wymagania jakie powinny być zachowane podczas realizacji oraz późniejszej eksploatacji tynków tak aby jak najdłużej zachowac je w stanie wysokiej sprawności technicznej
-
The Selection of Anchoring System for Floating Houses by Means of AHP Method
PublicationThis paper indicates and analyses the use of anchoring systems, such as mooring piles, booms, mooring cables, and deadweight anchors with additional elastic connectors, which are the most frequently applied by the producers of floating houses. The selection of the most advantageous anchoring system is complicated and requires the application of quantitative and qualitative data and methods. This publication presents the results...
-
Tests of bond between concrete and steel bars – literature background and program of own research
PublicationThis article deals with the issue of the bond between concrete and reinforcement. The bond is crucial for reinforced concrete elements because it is possible to transfer forces (stresses) from concrete to the reinforcement. Basic information related to the cooperation of concrete and rebars was recalled in the article. Selected issues concerning theoretical and numerical analysis as well as experiments of the bond phenomenon were...
-
Shear resistance of low height precast concrete lintels
PublicationThe scope of the paper is to investigate analytically and determine experimentally the shear resistance of low height reinforced precast concrete lintels. The chosen procedures included in national and international standards applied for the design of structural concrete elements to an estimation of shear behaviour of reinforced concrete elements are described. The characteristic and designed shear strength of precast concrete...
-
Shear Cap Size Selection Method Based on Parametric Analysis of ACI-318 Code and Eurocode 2 Standard
PublicationThe scope of the paper is to propose a method for determining the size of shear caps in a slab–column-connections-reinforced concrete structure. Usually, shear heads are used to enhance slab–column connection, especially when the transverse reinforcement does not give the required punching shear load capacity. The dimensions of the shear head should provide the punching shear resistance of the connection inside and outside the...
-
Posadzki antyelektrostatyczne kluczowym elementem ochrony przed elektrycznością statyczną - wybrane wymagania techniczne
PublicationW artykule przedstwiono w spsoób syntetyczny zbiór podstawowych wymagań technicznych jakim powinny odpowiadać posadzki antyelektrostatyczne
-
Performance of isotropic constitutive laws in simulating failure mechanisms in scaled RC beams
PublicationResults of numerical calculations of reinforced concrete (RC) beams are presented. Based on experimental results on longitudinally reinforced specimens of different sizes and shapes are investigated. Four different continuum constitutive laws with isotropic softening are used: one defined within continuum damage mechanics, an elasto-plastic with the Rankine criterion in tension and the Drucker-Prager criterion in compression, a...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
Latest Achievements in Concrete Structures Three-Dimensional Printing
PublicationWe can hear about three-dimensional printed concrete structures for several years, up to date solutions in this technology allow entire printing settlements of tiny concrete houses. Due to technical limitations, these houses are still small and not very durable, but undoubtedly, this technology is developing. Home printed in three-dimensional technology can be an alternative to modular container buildings implemented in areas affected...
-
Geometry of cycling track
PublicationThe paper describes the problems related to shaping of the geometry of the cycling track. The method of selection of the angle at the track curve is presented. Issues related to the selection of the appropriate transition curve and the superelevation section along the transition curve are presented. Reference to the recommendations presented in the literature and scientific papers has been made. Special attention...
-
Framework for Structural Health Monitoring of Steel Bridges by Computer Vision
PublicationThe monitoring of a structural condition of steel bridges is an important issue. Good condition of infrastructure facilities ensures the safety and economic well-being of society. At the same time, due to the continuous development, rising wealth of the society and socio-economic integration of countries, the number of infrastructural objects is growing. Therefore, there is a need to introduce an easy-to-use and relatively low-cost...
-
Dobór analizy strategicznej przedsięwzięć budowlanych w aspekcie zrównoważonego rozwoju
PublicationCelem artykułu jest wskazanie najbardziej właściwej z dostępnych metod analiz strategicznych dla realizacji przedsięwzięć budowlanych oraz wykorzystanie jej do oceny czy dane zamierzenie inwestycyjne pozostaje w zgodzie z zasadami rozwoju zrównoważonego.
-
Concrete Compressive Strength Under Changing Environmental Conditions During Placement Processes
PublicationThe technological process of concrete production consists of several parts, including concrete mix design, concrete mix production, transportation of fresh concrete mix to a construction site, placement in concrete framework, and curing. Proper execution of these steps provides good quality concrete. Some factors can disturb the technological process, mainly temperature and excessive precipitation. Changing daily temperature and...
-
CHARACTERIZATION STUDY ON MECHANICAL PROPERTIES OF POLYESTER COATED FABRIC
PublicationThe scope of the paper is to determine the mechanical properties of the Precontraint 1302 polyester coated fabric under uniaxial and biaxial tensile tests. The results are compared for Precontraint 1302 fabric and other types of coated fabrics. The author applied an orthotropic model and a dense net model to reflect the polyester coated fabric performance under uniaxial and biaxial tensile tests. Material parameters are specified...
-
Badania eksperymentalne stalowych łączników balkonowych typu podwójnego
PublicationArtykuł stanowi prezentację wyników badań eksperymentalnych przeprowadzonych na czterech pełnowymiarowych prefabrykowanych zestawach balkonowych o wymiarach (szerokość × długość × wysokość): 2,0 m × 2,78 m × 0,186 m (w spadku do 0,17 m). Zestawy składały się z żelbetowych płyt (balkonowej oraz stropowej), połączonych ze sobą łącznikami balkonowymi typu podwójnego (łącznik składający się z dwóch prętów rozciąganych oraz dwóch blach...
-
Badania doświadczalne przyczepności
PublicationW artykule przedstawiono podstawowe informacje dotyczące zjawisko przyczepności stalowych prętów i betonu, w sposób szczegółowy opisano autorski program badań tego zjawiska
-
Application of the Chimney Cap as a Method of Improving the Effectiveness of Natural Ventilation in Buildings
PublicationAdequately designed natural ventilation is the cheapest and easiest way to effectively remove indoor pollutants and keep the air inside a building fresh. A prediction of the performance and effectiveness of ventilation in order to determine the design of a ventilation system can provide real and long-term cost savings. The worst time in terms of the efficiency of natural ventilation is the spring-autumn transition period [7]. In...
-
Analiza numeryczna i wymiarowanie stropu kablobetonowego
PublicationW pracy poruszono tematykę analizy numerycznej i wymiarowania stropu kablobetonowego. Przedstawiono przykład obliczeniowy, w którym omówiono poszczególne etapy budowy modelu numerycznego w programie SOFiSTiK oraz wymiarowania stropu żelbetowego kablobetonowego budynku biurowo-usługowego zaprojektowanego w układzie płytowo-słupowym.
-
Analiza numeryczna i analityczna przekrycia w kształcie powłoki synklastycznej o podstawie kwadratowej
PublicationW pracy poruszono problem obliczania przekrycia żelbetowego w kształcie powłoki synklastycznej ściętej o podstawie kwadratowej. Przedstawiono obliczenia analityczne i numeryczne sił w powłoce. Powłoka jest poddana działaniu głównie sił ściskających, co jest korzystne dla tego typu konstrukcji. W strefie brzegowej i podporowej konieczne jest wymiarowanie na mimośrodowe ściskanie i rozciąganie z uwagi na znaczący wzrost momentów...
-
An experimental study of self-sensing concrete enhanced with multi-wall carbon nanotubes in wedge splitting test and DIC
PublicationConcrete is the worldwide most utilized construction material because of its very good performance, forming ability, long-term durability, and low costs. Concrete is a brittle material prone to cracking. Extensive cracking may impact durability and performance over time considerably. The addition of a small amount of carbon nanotubes (CNT) increases the concrete’s overall electrical conductivity, enabling internal structure...
Year 2019
-
WYBRANE ZAGADNIENIA PROJEKTOWANIA KONSTRUKCJI BETONOWYCH Z POCZĄTKU XX WIEKU W STANACH ZJEDNOCZONYCH
PublicationPodczas codziennej działalności inżynierskiej bardzo często pomija się zagadnienie zmienności w czasie zasad projektowania, w szczególności ewolucji przepisów normowych. W przypadku konstrukcji betonowych okresem ich najbardziej intensywnego rozwoju był początek XX wieku. Miejscem, w którym ten rozwój był szczególnie widoczny, są Stany Zjednoczone. Jednym z najbardziej znanych obiektów pochodzących z tamtego okresu jest budynek...
-
Wspólczesne tynki w budownictwie ogólnym - klasyfikacja i wybrane przykłady badań oraz problemów eksploatacyjnych
PublicationW artykule opisano aktualnie obowiązującą klasyfikacje tynków, scharakteryzowano ich własności, opisano przykłady usterek i uszkodzeń wypraw tynkarskich oraz przedstawiono koncepcje ich naprawy
-
Wpływ drążenia pionowego w silikatowych elementach murowych na nośność kotew wklejanych
PublicationThe article is showing results of measurements of the effectiveness of the assembly anchor of inmates glued in in sunk vertically lime-sandy blocks. Examinations were performed for cases of the assembly anchor in different fragments of blocks: in part fullwall, in an axis of symmetry and on the edge of the aperture vertical. An influence of the location of places of settling was examined anchor to the way of the forming of uniting...
-
Tynki-pojęcia podstawowe i podział
PublicationW artykule przedstawiono opis podstawowych pojęć i zaproponowano podział tynków. Opisano w szczegółach podstawowe uwarunkowania decydujące o trwałości tynków
-
Tynki w budownictwie ogólnym. wybrane badania oraz problemy eksploatacyjne
PublicationMonografia stanowi studium przypadku problemów związanych z realizacją oraz eksploatacją tynków stosowanych w obiektach budownictwa ogólnego
-
Termorenowacja stolarki okiennej
PublicationW artykule przedstawiono wyniki wstępnych obliczeń współczynnika przenikania ciepła dla zabytkowych okien skrzynkowych wykonanych dla stanu przed i po ich renowacji. Celem analizy było uzyskanie żądanych przepisami szczegółowymi wartości parametrów termoizolacyjnych, przy jednoczesnym braku utraty wartości historycznej stolarki okiennej. Opisany przykład koncepcji termorenowacji istniejącej stolarki okiennej polegał na montażu...
-
TECHNICZNE UWARUNKOWANIA MODERNIZACJI BUDYNKU OBJĘTEGO OCHRONĄ KONSERWATORSKĄ
PublicationW artykule przedstawiono opis stanu technicznego budynku po wieloletnim okresie eksploatacji, w szczególności wpływ dotychczasowego sposobu użytkowania i braku regularnego prowadzenia remontów okresowych na sprawnośc techniczna obiektu. Przeanalizowano wpływ zastosowanych w okresie jego realizacji rozwiązań technicznych na aktualne ograniczenia związane z planowaną, docelowa zmianą sposobu użytkowania. Przedstawiono także wariantowe...
-
Sposoby przykładania obciążenia zmiennego na konstrukcję płytowo-słupową
PublicationW pracy przedstawiono analizę porównawczą wybranych metod zadawania obciążenia zmiennego na konstrukcje płytowo-słupową. Przeanalizowano pięć sposobów rozkładu obciążenia na płytę stropową. Wyniki momentów zginających i przemieszczeń w wybranych punktach dla analizowanych przypadków porównywano z wartościami ekstremalnymi obliczonymi na podstawie powierzchni wpływu (Wariant 1). Wykonane obliczenia pozwoliły na wskazanie zalecanej...
-
Size effect in concrete beams under bending – influence of the boundary layer and the numerical description of cracks
PublicationIn the paper the size effect phenomenon in concrete is analysed. The results of numerical simulations of using FEM on geometrically similar un-notched and notched concrete beams under bending are presented. Concrete beams of four different sizes and five different notch heights under three-point bending test were simulated. In total 18 beams were analysed. Two approaches were used to describe cracks in concrete. First, eXtended...
-
Rozstaw rys według PN-EN 1992-1-1:2008 oraz PN-B 03264:2002
PublicationW pracy opisano mechanizm powstawania rys dla osiowo rozciąganego pręta żelbetowego. Na tej podstawie określono maksymalny i minimalny rozstaw rys, konfrontując otrzymane wyniki z procedurami podanymi w normie europejskiej PN-EN 1992-1-1:2008 oraz w normie polskiej PN-B 03264:2002. Przedstawiono praktyczne wnioski do projektowania, wynikajace z przeprowadzonej analizy.
-
Przyczyny uszkodzeń i sposób naprawy posadzki ze styrobetonu
PublicationW artykule opisano uszkodzenia, badania i sposób naprawy posadzki wykonanej na istniejącym stropie żelbetowym o powierzchni ok. 1050 m2 i podłożu ze styrobetonu. W posadzce stwierdzono znaczne uszkodzenia w postaci zarysowań, odspojeń i nierówności. W celu określenia ich przyczyn wykonano badania in situ oraz badania laboratoryjne. Stwierdzono, że przyczyną powstania uszkodzeń są błędy wykonawcze. Wykonano próbną naprawę uszkodzeń...
-
Proceedings of the fib Symposium 2019: Concrete - Innovations in Materials, Design and Structures 2019
PublicationDesigning a concrete mix is a process of synthesizing many components, it is not a simple process and requires extensive technical knowledge. The design process itself focuses on obtaining the required strength of concrete. Very often designing a concrete mix takes into account the need to maintain the proper water-demand and frost-resistance features. The parameters that influence the concrete class most significantly are the...
-
Problemy eksploatacyjne tynków wewnętrznych-studium przypadku
PublicationPrzedmiotem artykułu jest opis problemów eksploatacyjnych tynków wewnętrznych na przykładzie konkretnej realizacji w budynku wielorodzinnym. Opisywany jest korytarz klatki schodowej, gdzie występowały pajęczynowate spękania i odspojenia tynku od podłoża. Artykuł rozpoczyna szczegółowa analiza przyczyn zaistniałych uszkodzeń w odniesieniu do norm dla podobnych rozwiązań technologicznych, potem następuje podanie koncepcji naprawy...
-
Opinia techniczna dotycząca oceny kierunku dzxiałań ratunkowych w Bazylice pw. Świętego Mikołaja zlokalizowanej w Gdańsku przy ulicy Świętojańskiej 72 w aspekcie zdarzenia losowego polegającego na uszkodzeniu sklepień południowej nawy bocznej
PublicationW opracowanej Opinii technicznej przeprwadzono Analizę poprawności działań inżynierskich prowadzonych w celu ograniczenia możliwości wystąpienia katastrofy budowlanej w obszarze Bazyliki pw. Świętego Mikołaja w Gdańsku
-
On some problems in determining tensile parameters of concrete model from size effect tests
PublicationThe paper presents results of numerical simulations of size effect phenomenon in concrete specimens. The behaviour of in-plane geometrically similar notched and unnotched beams under three-point bending is investigated. In total 18 beams are analysed. Concrete beams of four different sizes and five different notch to depth ratios are simulated. Two methods are applied to describe cracks. First, an elasto-plastic constitutive law...
-
Ocena wpływu drgań przekazywanych na budynek przez agregat prądotwórczy
PublicationW artykule opisano zakres badań polowych niezbędnych do określenia poziomu drgań w budynku biurowo-usługowym podczas pracy agregatu prądotwórczego zlokalizowanego na dachu tego budynku. Dokonano oceny szkodliwości pomierzonych drgań na budynek i ludzi, którzy się w nim znajdują. Przedstawiono także krótki przegląd literatury dotyczącej oceny szkodliwości oddziaływań dynamicznych na budynki lub ludzi.
-
Nasada kominowa sposobem intensyfikacji wydajności wentylacji grawitacyjnej w budynkach mieszkalnych
PublicationW Polsce wentylacja grawitacyjna jest najbardziej popularną metodą przewietrzania pomieszczeń, w tym lokali w budynkach mieszkalnych. Ten rodzaj wentylacji działa pod wpływem sił natury w wyniku różnicy ciśnień między powietrzem zewnętrznym a panującym wewnątrz obiektu, w następstwie czego wentylacje grawitacyjną trudno jest kontrolować oraz przewidywać poprawność jej funkcjonowania. Wentylacja grawitacyjna działa najlepiej zimą,...
-
Meso‐scale analyses of size effect in brittle materials using DEM
PublicationThe paper describes numerical meso-scale results of a size effect on strength, brittleness and fracture in brittle materials like concrete. The discrete element method (DEM) was used to simulate the size effect during quasi-static splitting tension with the experimental-based meso-structure. The two-dimensional (2D) calculations were carried out on concrete cylindrical specimens with two diameters wherein two different failure...
-
Mechanical Properties of Aluminium Bracket Strengthening
PublicationThe aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021;...
-
Machine Learning Techniques in Concrete Mix Design
PublicationConcrete mix design is a complex and multistage process in which we try to find the best composition of ingredients to create good performing concrete. In contemporary literature, as well as in state-of-the-art corporate practice, there are some methods of concrete mix design, from which the most popular are methods derived from The Three Equation Method. One of the most important features of concrete is compressive strength, which...
-
Load effect impact on the exploitation of concrete machine foundations used in the gas and oil industry
PublicationMachine foundations is a critical topic in the gas and oil industry, which design and exploitation require extensive technical knowledge. Machine foundations are the constructions which are intended for mounting on it a specific type of machine. The foundation has to transfer dynamic and static load from machine to the ground. The primary difference between machine foundations and building foundations is that the machine foundations...
-
Formalno-prawne uwarunkowania rozwoju mieszkalnictwa w Polsce w aspekcie eksploatacji mieszkalnych jednistek pływających
PublicationArtykuł zawiera analizę sytuacji prawnej obiektów jakimi są Domy Na Wodzie oraz konsekwencji jakie powodują dla właścicieli aktualne zapisy najważniejszych Ustaw z nimi związanych tzn.: ustawy Prawo budowlane, ustawy o gospodarce nieruchomościami, Kodeksu cywilnego oraz Prawa wodnego. W pracy opisano światowe trendy osadnictwa na wodzie i porównano do sytuacji mieszkalnictwa na wodzie w Polsce. Na podstawie doświadczeń innych krajów...
-
Force transfer and stress distribution in short cantilever deep beams loaded throughout the depth with a various reinforcement
PublicationDeep beams used as the main reinforced concrete structural elements which taking over the load and stiffening construction are often found in high-rise buildings. The architecture of these buildings is sometimes sophisticated and varied, arouse the admiration of the majority of recipients, and thus causing an engineering challenge to correctly design the structural system and force transfer. In such structures is important to shape...
-
Experimental tests of lintel hybrid beams
PublicationThe results of experimental tests of lintel hybrid beams made of air concrete and prestressed concrete were presented in paper. Blocks of air concrete was a protective element for the construction one. The length of hybrid beams was 3.0 m, while total height 27 cm. It was assumed that hybrid beams will work in the simply-supported scheme (with a 10 cm support) loaded uniformly over the entire length. The object of the tests were...
-
Dokumentacja oraz wnioski z badań prototypowego stropu typu filigran z wkładką styropianową dla firmy Strobud Prefabrykacja sp. z o.o.
PublicationNiniejsze opracowanie stanowi dokumentację oraz wnioski z badań prototypowego stropu typu filigran z wkładką styropianową.
-
Concrete mix design using machine learning
PublicationDesigning a concrete mix is a process of synthesizing many components, it is not a simple process and requires extensive technical knowledge. The design process itself focuses on obtaining the required strength of concrete. Very often designing a concrete mix takes into account the need to maintain the proper water-demand and frost-resistance features. The parameters that influence the concrete class most significantly are the...
-
Chemical and Mechanical Properties of 70-Year-Old Concrete
PublicationThe aim of this research is to determine the durability and strength of concrete continuous footing based on the chosen mechanical, physical, and chemical properties of the concrete. The presented investigations constitute some opinions from experts on the bearing capacity of concrete continuous footing and the possibilities of carrying additional loads and extended working life. The cylindrical specimens were taken from continuous...
-
CHARAKTERYSTYKA I ZAKRES STOSOWANIA TYNKÓW
PublicationWyprawy tynkarskie, potocznie nazywane tynkami, wykorzystywane są w budownictwie od wielu tysiącleci. Niektóre rodzaje tynków stosowane są w niemal niezmienionej postaci do dnia dzisiejszego, jednak wiele nowych typów wypraw tynkarskich opracowano w ciągu ostatnich kilkudziesięciu lat. Kiedyś przeważnie były przygotowywane w całości na budowie, obecnie w większości przypadków wytwarzane są w postaci suchych mieszanek, gotowych...
-
Causes of damage and methods of repairing floor made on polystyrene concrete
PublicationThe paper describes damages, tests and repair of the floor made on existing ceiling and expanded polystyrene concrete underlay. The floor was built on a reinforced concrete ceiling with an area of about 1050 m2. Significant damage in the form of cracks, detachments and unevenness was found in the floor. In order to determine the causes of damage, in situ tests and laboratory tests were carried out. It was found that the damage...
-
Błędy projektowe zewnetrznego szybu dźwigu osobowego oraz ich negatywny wpływ na eksploatację budynku przychodni
PublicationPo 25 latach eksploatacji budynku przychodni podjęto decyzję o jego przystosowaniu dla potrzeb osób niepełnosprawnych. W związku z tym opracowano projekt budowlany zewnętrznego, dostawianego do ściany szczytowej szybu widnowego. Szyb zaprojektowany został jako murowany z pustaków ceramicznych z poziomymi przewiązkami w poziomie stropów budynku przychodni, posadowiony na żelbetowej monolitycznej płycie fundamentowej o grubości 25...
-
Błedy projektowe oraz wykonawcze przyczyną uszkodzeń podłogi w pomieszczeniach nad tunelem
PublicationPrzedmiotem artykułu jest podłoga w pomieszczeniach znajdujących się nad tunelem kolejowym w wielkopowierzchniowym Centrum Handlowym. W wyniku błędów projektowych oraz wykonawczych podłoga nie spełniała warunków bezpieczeństwa konstrukcji oraz bezpieczeństwa użytkowania. Popełnione błędy były przyczyną awarii, a w przyszłości doprowadzić mogły do katastrofy budowlanej.
-
Bezpieczeństwo eksploatacyjne komina żelbetowego-studium przypadku
PublicationMonografia traktuje o bezpieczeństwie eksploatacyjnym komina. Monografia na podstawie ekspertyzy dotyczącej oceny stanu technicznego komina o wysokości 100 m usytuowanego na terenie Elektrociepłowni Elbląg zlokalizowanej w Elblągu przy ulicy Elektrycznej 20a.
-
Badania doświadczalne tynków wewnętrznych
PublicationArtykuł jest poświęcony badaniom doświadczalnym nad tynkami wewnętrznymi. Rozpoczyna się charakterystyką techniczną tynków zewnętrznych, w ramach której zostają omówione tynki cementowo-wapienne, tynki gipsowe oraz tynki lekkie (ciepłochłonne). Następnie zostaje opisane stanowisko badawcze wykorzystane w eksperymencie oraz przedstawione wyniki tego eksperymentu. Tekst kończy szczegółowa interpretacja wyników, w której każdemu rodzajowi...
-
Badania diagnostyczne posadzki w Bazylice św. Mikołaja w Gdańsku
PublicationZmiany warunków otoczenia obiektów zabytkowych, do których można zaliczyć industrializację otoczenia, ruch pojazdów mechanicznych, zanieczyszczenie środowiska oraz okresowe zmiany poziomu wód gruntowych, mają niejednokrotnie negatywny wpływ na ich stan techniczny. W przypadku pojawienia się pierwszych oznak uszkodzeń elementów konstrukcyjnych lub wykończeniowych, ocena wpływu poszczególnych czynników jest utrudniona, w szczególności,...
-
Assessment of technical condition and repair of steel structure elements on the example of fire damage in a warehouse building
PublicationThe paper analyses a case study on the structural assessment of warehouse building partially damaged by fire caused by external source (fire of lorries close to the building). The authors focus on the site investigations and laboratory test results prior to assessing actual condition of the structural elements. Both strengthening concept and repair procedure of a steel column are addressed here. A short literature survey in the...
-
Assessment of Failure Occurrence Rate for Concrete Machine Foundations Used in Gas and Oil Industry by Machine Learning
PublicationConcrete machine foundations are structures that transfer loads from machines in operation to the ground. The design of such foundations requires a careful analysis of the static and dynamic effects caused by machine exploitation. There are also other substantial differences between ordinary concrete foundations and machine foundations, of which the main one is that machine foundations are separated from the building structure....
-
Application of multi-criteria method to assess the usefulness of a hydrotechnical object for floating housing
PublicationThis publication presents the analysis of three hydrotechnical objects located in the Municipality of Gdańsk with a view of mooring Floating Houses. The assessment of the adaptation of a hydrotechnical object has been carried out by a multi- criteria method AHP and using the main criteria such as: mooring system, communication with the mainland, availability of the utility networks, waste disposal and location of the parking spaces....
-
Analiza porównawcza metod obliczania przebicia
PublicationW artykule przedstawiono analizę porównawczą wybranych normowych metod wyznaczania nośności na przebicie konstrukcji płytowo-słupowej. Przeanalizowano trzy normowe sposoby wyznaczania nośności na przebicie.Wykonane obliczenia pozwoliły na wskazanie różnic w wyznaczonych wartościach nośności płyty na przebicie w konstrukcji płytowo-słupowej.
Year 2018
-
Wpływ rodzaju styku na nośność prefabrykowanych wsporników łączonych ze słupem prętami sprężającymi
PublicationW referacie przedstawiono wyniki badań prefabrykowanych wsporników połączonych z istniejącym słupem za pomocą prętów sprężających. Parametrami zmiennymi były smukłość ścinania, usytuowanie prętów sprężających i powierzchnia styku wspornika ze słupem. Ten ostatni parametr ma istotny wpływ na zarysowanie i nośność tak wykonanych wsporników. Uzasadnieniem podjęcia eksperymentalnych badań w celu sprawdzenia zachowania się i nośności...
-
Verification of selected calculation methods regarding shear strength in beams without web reinforcement
PublicationThe purpose of the article was to compare selected calculation methods regarding shear strength in reinforced concrete beams without web reinforcement. Several calculation methods were tested. This included codes: PN-EN 1992-1-1:2008, ACI 318-14 and fib Model Code for Concrete Structures 2010. The analysis also consists of authorial methods published in technical literature. Calculations of shear strengths were made based on experimental...
-
Uszkodzenia wyprawy z tynku ciepłochronnego w następstwie błędów projektowych i wykonawczych
PublicationW artykule opisano następstwa braku zachowania reżimu technologicznego podczas realizacji wyprawy z ciepłochronnego tynku perlitowego. Wskazano koncepcje rozwiązań majacych na celu usunięcie występujących usterek
-
Usterki na dachu płaskim budynku wielorodzinnego
PublicationBłędy projektowe ora zwykonawcze wpływają bezpośrednio na bezpieczeństwo konstrukcji i użytkowania obiektów budowlanych, także mieszkalnych. Usunięcie usterek i doprowadzenie budynków do właściwego stanu technicznego wymaga od właścicieli dużego zaangazowania finansowego. W przypadku nieprawidłowości występujących na stropodachach, w tym dachach płaskich, powoduje to również istotne utrudnienia i uciążliwości eksploatacyjne. Niektóre...
-
Use of radiography images and gray level co-occurrence matrix to investigate gravitational granular flow
PublicationThe paper presents analysis of granular gravitational flow based on radiography images processing. The investigations were conducted for silo model geometry with concentric/eccentric discharging modes. The continuous X-ray radiography scans of granular material distribution, acquired during flow, were obtained by means of an especially designed model silo with rectangular bin and different settings of hopper angles. Image processing...
-
Tome-lapse X-ray tomography imaging of flow patterns in versatile silo model
PublicationThe paper introduces a new versatile silo model that was especially designed for in situ X-ray tomography studies of silo discharge for various flow conditions, namely concentric and eccentric. The presented work focuses on organic granular materials where low fraction of short-grain white rice is mixed with spheroidal sorghum particles. The high-quality tomography images combined with adequate image processing strategy allows...
-
Szyby zespolone w systemach fasadowych
PublicationW artykule przedstawiono wybrane kryteria techniczne stosowane do oceny jakościowej izolacyjnych szyb zespolonych. Bazując na własnych doświadczeniach, autor zwrócił uwagę na pojawiające się problemy w trakcie odbiorów technicznych na budowie. Przedstawiono także krótki przegląd literatury z zakresu szkła budowlanego i szyb zespolonych.