Filtry
wszystkich: 931
wybranych: 881
Wyniki wyszukiwania dla: FINITE ELEMENT MODELS - SOLD ELEMENTS
-
GPU-Accelerated Finite-Element Matrix Generation for Lossless, Lossy, and Tensor Media [EM Programmer's Notebook]
PublikacjaThis paper presents an optimization approach for limiting memory requirements and enhancing the performance of GPU-accelerated finite-element matrix generation applied in the implementation of the higher-order finite-element method (FEM). It emphasizes the details of the implementation of the matrix-generation algorithm for the simulation of electromagnetic wave propagation in lossless, lossy, and tensor media. Moreover, the impact...
-
Atomic-Scale Finite-Element Modeling of Elastic Mechanical Anisotropy in Finite-Sized Strained Phosphorene Nanoribbons
PublikacjaNanoribbons are crucial nanostructures due to their superior mechanical and electrical properties. This paper is devoted to hybrid studies of the elastic mechanical anisotropy of phosphorene nanoribbons whose edges connect the terminals of devices such as bridges. Fundamental mechanical properties, including Young’s modulus, Poisson’s ratio, and density, were estimated from first-principles calculations for 1-layer, 3-layer, and...
-
Jacobi and gauss-seidel preconditioned complex conjugate gradient method with GPU acceleration for finite element method
PublikacjaIn this paper two implementations of iterative solvers for solving complex symmetric and sparse systems resulting from finite element method applied to wave equation are discussed. The problem under investigation is a dielectric resonator antenna (DRA) discretized by FEM with vector elements of the second order (LT/QN). The solvers use the preconditioned conjugate gradient (pcg) method implemented on Graphics Processing Unit (GPU)...
-
GPU Acceleration of Multilevel Solvers for Analysis of Microwave Components With Finite Element Method
PublikacjaThe letter discusses a fast implementation of the conjugate gradient iterative method with ${rm E}$-field multilevel preconditioner applied to solving real symmetric and sparse systems obtained with vector finite element method. In order to accelerate computations, a graphics processing unit (GPU) was used and significant speed-up (2.61 fold) was achieved comparing to a central processing unit (CPU) based approach. These results...
-
Simulations of Shear Zones and Cracks in Engineering Materials Using eXtended Finite Element Method
PublikacjaNumerical simulations of cracks and shear zones in quasi-brittle materials are presented. Extended Finite Element Method is used to describe both cracks and shear zones. In a description of tensile cracks, a Rankine criterion is assumed. A discrete Mohr-Coulomb law is adopted for simulations of shear zones. Results of simple numerical tests: unixial tension, bending and biaxial compression are demonstrated.
-
Spectral Finite Element Method in Condition Monitoring and Damage Detection
PublikacjaIt is well known that the dynamic behaviour of engineering structures may carry very important and crucial information that can be further used for the assessment of their condition as well as detection of any damage induced. The current interest in monitoring techniques based on the propagation of guided elastic waves requires that numerical techniques used for modelling the phenomena associated must shift into the realm of high...
-
A general isogeometric finite element formulation for rotation‐free shells with in‐plane bending of embedded fibers
PublikacjaThis article presents a general, nonlinear isogeometric finite element formulation for rotation-free shells with embedded fibers that captures anisotropy in stretching, shearing, twisting, and bending - both in-plane and out-of-plane. These capabilities allow for the simulation of large sheets of heterogeneous and fibrous materials either with or without matrix, such as textiles, composites, and pantographic structures. The work...
-
Finite element/mode-matching analysis of ferrite/dielectric line junctions of arbitrary cross-section
PublikacjaThis paper is focused on the analysis of line junctions obtained as a cascade of dielectric and ferrite guides of arbitrary cross-section. The main application of such structures is nonreciprocal devices such as isolators, circulators, or phase shifters. The efficient finite element/mode-matching approach is proposed to the analysis of such structures. In this approach, thefiniteelementmethod is applied todetermine propagation...
-
Application of the distributed transfer function method and the rigid finite element method for modelling of 2-D and 3-D systems
PublikacjaIn the paper application of the Distributed Transfer Function Method and the Rigid Finite Element Method for modelling of 2-D and 3-D systems is presented. In this method an elastic body is divided into 1-D distributed parameter elements (strips or prisms). The whole body (divided into strips or prism) is described by a set of coupled partial differential equations. Solving this equations in the state space form it is possible...
-
Finite element modeling of plastic hinges based on ductility demand-capacity method using nonlinear material for dynamic analysis
PublikacjaThe article discusses modeling plastic hinges in reinforced concrete interme-diate supports using finite elements methods. The ductility demand-capacitymethod was used to determine the geometrical parameters of cross-section plas-ticization zones, their ability to move and rotate, as well as their ductility. Dueto the varied geometry and stiffness of the supports and their nonlinear behav-ior under dynamic load, this method was...
-
Diagonalized Macromodels in Finite Element Method for Fast Electromagnetic Analysis of Waveguide Components
PublikacjaA new technique of local model-order reduction (MOR) in 3-D finite element method (FEM) for frequency-domain electromagnetic analysis of waveguide components is proposed in this paper. It resolves the problem of increasing solution time of the reduced-order system assembled from macromodels created in the subdomains, into which an analyzed structure is partitioned. This problem becomes particularly relevant for growing size and...
-
Finite element modelling of a historic church structure in the context of a masonry damage analysis
PublikacjaThe paper includes a case study of modelling a real historic church using the finite element method (FEM) based on laser scans of its geometry. The main goal of the study was the analysis of the causes of cracking and crushing of masonry walls. An FEM model of the structure has been defined in ABAQUS. A non-linear dynamic explicit analysis with material model including damage plasticity has been performed. A homogenization procedure...
-
SSFR Test of Synchronous Machine for Different Saturation Levels using Finite-Element Method
PublikacjaIn this paper the StandStill Frequency Response characteristics (SSFR) of saturated synchronous generator (SG) have been calculated using Finite Element Method (FEM) analysis. In order to validate proposed approach for unsaturated conditions FEM simulation from Flux2D software has been compared with the measurements performed on the 10 kVA, 4- poles synchronous machine ELMOR GCe64a of salient rotor construction, equipped with a...
-
Closed Form Constraint Equations Used to Express Frictionless Slip of Multibody Systems Attached to Finite Elements—Application to a Contact between a Double Pendulum and a Beam
PublikacjaThis paper focuses on the numerical modeling of the dynamics of mechanical systems. Robots that can inspect high-voltage lines inspired this research. Their control systems must anticipate potential grab positions appropriately. We intend to formulate equations dedicated to the numerical description of the robot/cable contact. The investigated problem is not straightforward, since parts of the modeled systems are numerically inhomogeneous....
-
Nonlinear finite element modeling of vibration control of plane rod-type structural members with integrated piezoelectric patches
PublikacjaThis paper addresses modeling and finite element analysis of the transient large-amplitude vibration response of thin rod-type structures (e.g., plane curved beams, arches, ring shells) and its control by integrated piezoelectric layers. A geometrically nonlinear finite beam element for the analysis of piezolaminated structures is developed that is based on the Bernoulli hypothesis and the assumptions of small strains and finite...
-
COMPARISON OF INFINITE ELEMENT MODELS
PublikacjaThe main objective of this paper is to show the comparison of two models of infinite ab- sorbing layer with increasing damping in numerical investigations of elastic wave prop- agation in unbounded structures. This has been achieved by the Authors by a careful in- vestigation of two different engineering structures characterised by gradually increasing geometrical and mathematical description complexities. The analysis included...
-
The effective elastic properties of human trabecular bone may be approximated using micro-finite element analyses of embedded volume elements.
PublikacjaBoundary conditions (BCs) and sample size affect the measured elastic properties of cancellous bone. Samples too small to be representative appear stiffer under kinematic uniform BCs (KUBCs) than under periodicity-compatible mixed uniform BCs (PMUBCs). To avoid those effects, we propose to determine the effective properties of trabecular bone using an embedded configuration. Cubic samples of various sizes (2.63, 5.29, 7.96, 10.58...
-
Biomechanics of Lumbar Spine Injury in Road Barrier Collision–Finite Element Study
PublikacjaLiterature and field data from CIREN database have shown that lumbar spine injuries occur during car crashes. There are multiple hypotheses regarding how they occur; however, there is no biomechanical explanation for these injuries during collisions with road safety barriers (RSBs). Therefore, the objective of this study was to investigate the mechanics of vertebral fractures during car collisions with concrete RSBs. The finite...
-
Rigid finite elements and multibody modeling in analyses of a robot shaped elastic/plastic deformations of a beam
PublikacjaDynamics analysis of a system composed of a parallel manipulator and of an elastic beam is presented in the paper. Classic 3RRR parallel manipulator is considered and used to deform the beam. Elasto-plastic deformations are investigated. Rigid-finite-elements technique is employed to deal with dynamics of the beam. A multibody structure is associated with the introduced hybrid system in order to model its dynamics. Idea of the...
-
Structural properties of foil bearings: a closed-form solution validated with finite element analysis
PublikacjaFluid film thickness in a compliant foil bearing is greatly influenced by the deflection of the bearing structure. Therefore, in order to properly model performance of a foil bearing, it is mandatory that the deflection of the compliant bearing structure due to the generated hydrodynamic pressure is determined accurately. This article proposes an easy-to-use two-dimensional model, which takes into account detailed geometry of the...
-
Study of the Effectiveness of Model Order Reduction Algorithms in the Finite Element Method Analysis of Multi-port Microwave Structures
PublikacjaThe purpose of this paper is to investigate the effectiveness of model order reduction algorithms in finite element method analysis of multi-port microwave structures. Consideration is given to state of the art algorithms, i.e. compact reduced-basis method (CRBM), second-order Arnoldi method for passive-order reduction (SAPOR), reduced-basis methods (RBM) and subspace-splitting moment-matching MOR (SSMM-MOR)
-
Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results
PublikacjaThis paper presents selected results and aspects of themultidisciplinary and interdisciplinary research oriented for the experimental and numerical study of the structural dynamics of a bend-twist coupled full scale section of awind turbine blade structure.Themain goal of the conducted research is to validate finite elementmodel of themodified wind turbine blade section mounted in the flexible support structure accordingly to the...
-
Optimal shape design of multi-element trawl-doors using local surrogate models
PublikacjaTrawl-doors have a large influence on the fuel consumption of fishing vessels. Design and optimiza-tion of trawl-doors using computational models are a key factor in minimizing the fuel consump-tion. This paper presents an optimization algorithm for the shape design of trawl-door shapes using computational fluid dynamic (CFD) models. Accurate CFD models are computationally expensive. Therefore, the direct use of traditional optimization...
-
Price Changes in Wholesale Market of Electrical Energy in Poland
PublikacjaThe article discusses the Price changes on the wholesale electricity market in Poland Moreover, The price levels on the futures electricity markets and the spot transactions market are presented. The impact of emission charges under the EU ETS on the price of electricity in the domestic market has been taken into consideration Furthermore, the basic determinants of the generation structure in Poland that influence the level of...
-
Determinants of the primary stability of cementless acetabular cup implants: A 3D finite element study
PublikacjaPrimary stability of cementless implants is crucial for the surgical success and long–term stability. However, primary stability is difficult to quantify in vivo and the biomechanical phenomena occurring during the press–fit insertion of an acetabular cup (AC) implant are still poorly understood. The aim of this study is to investigate the influence of the cortical and trabecular bone Young's moduli Ec and Et, the interference...
-
An Efficient Framework For Fast Computer Aided Design of Microwave Circuits Based on the Higher-Order 3D Finite-Element Method
PublikacjaIn this paper, an efficient computational framework for the full-wave design by optimization of complex microwave passive devices, such as antennas, filters, and multiplexers, is described. The framework consists of a computational engine, a 3D object modeler, and a graphical user interface. The computational engine, which is based on a finite element method with curvilinear higher-order tetrahedral elements, is coupled with built-in...
-
On finite element modelling of architectural fabrics for hanging roofs
PublikacjaArtykuł dotyczy modelowania konstytutywnego i identyfikacji parametrów materiałowych dla tkanin technicznych powszechnie stosowanych w konstrukcjach membranowo-cięgnowych. Autorzy przedstawiają krótką charakterystyke modeli stosowanych w opisie zachowania sie tkanin technicznych. Opisano metodę do idetyfikacji nieliniowo-sprężystych właściwości tkanin technicznych. Dodatkowo dokonao porówania wyników z prób jednoosiowego rozciągania...
-
Viscoplastic constitutive laws and their implementation it the finite element method
PublikacjaW pracy przedstawiono zasady formułowania i zastosowania w metodzie elementów skończonych lepkoplastycznych praw konstytutywnych. Podano skrótowo sposób identyfikacji parametrów i omówiono pewne szczególne założenia, które muszą być przyjęte aby można było dane prawo zastosować w obliczeniach numerycznych.
-
Finite Element model updating on experimental modal parameters
Publikacja -
Forty-five years of the Rigid Finite Element Method
PublikacjaIn the paper there are described developments of the method in the past 45 year years in dynamical analysis of system with constant and changing in time configuration, including also control of the systems.
-
An isogeometric finite element formulation for boundary and shell viscoelasticity based on a multiplicative surface deformation split
PublikacjaThis work presents a numerical formulation to model isotropic viscoelastic material behavior for membranes and thin shells. The surface and the shell theory are formulated within a curvilinear coordinate system,which allows the representation of general surfaces and deformations. The kinematics follow from Kirchhoff–Love theory and the discretization makes use of isogeometric shape functions. A multiplicative split of the surface...
-
High frequency dynamics of an isotropic Timoshenko periodic beam by the use of the Time-domain Spectral Finite Element Method
PublikacjaIn this work results of numerical simulations and experimental measurements related to the high frequency dynamics of an aluminium Timoshenko periodic beam are presented. It was assumed by the authors that the source of beam structural periodicity comes from periodical alterations to its geometry due to the presence of appropriately arranged drill-holes. As a consequence of these alterations dynamic characteristics of the beam...
-
Modeling by finite element methods of impact of erosion on frequency of normal modes of L-0 blade
PublikacjaAfter some time of exploitation steam turbine rotors blades in energetic industry they are being eroded and also their frequency of normal modes is changed. Those changes can cause to unwanted shift of blades normal mode frequencies. It is necessary to find quick method of rating changes of frequency in connection of mass loss due erosion. The evaluation of this dependence was made by finite element modeling method using HyperWorks...
-
Degenerated isoparametric finite elements in nonlinear analysis of 2D-problems
Publikacja -
Finite automata for compact representation of language models in NLP
PublikacjaPrzedstawiona zostaje technika reprezentacji modeli języka w przetwarzaniu języka naturalnego wymagająca mało pamięci. Po krótkim omówieniu przyczyn poszukiwania oszczędnej reprezentacji takich modeli języka, pokazane jest, jak automaty skończone mogą być użyte w tym celu. Technika może być postrzegana jako zastosowanie i rozszerzenie doskonałej funkcji mieszającej z wykorzystaniem automatów skończonych. Pierwsze doświadczenia...
-
A finite element analysis of thermal energy inclination based on ternary hybrid nanoparticles influenced by induced magnetic field
PublikacjaThe use of hybrid nanoparticles to improve thermal processes is a key method that has implications for a variety of interventions utilized in many sectors. This paper aimed to look into the impacts of ternary nanoparticles on hyperbolic tangent materials to establish their thermal characteristics. Flow describing equations have been explored in the presence of heat production, non-Fourier heat flux, and an induced magnetic field....
-
Dynamics of flexible multibody systems : Rigid finite element method.
PublikacjaW książce przedstawiono zagadnienie przekształceń jednorodnych, z punktu widzenia opisu dynamiki układów wielomasowych, złożonych z brył sztywnych. Omówiono metodę sztywnych elementów skończonych, w której model składa się z brył sztywnych połączonych elementami sprężystymi i tłumiącymi, a także jej wersję zmodyfikowaną. W modelu uwzględnia się duże przemieszczenia brył. Przedstawiono obliczenia dla belki wspornikowej oraz omówiono...
-
adaptive finite-element multigrid method in 3d magnetostatic analysis.
PublikacjaPrzedstawiono procedurę analizy magnetostatycznej obwodów mikrofalowych zawierających przewodniki o dowolnym kształcie. Zakłada się pobudzenie pola magnetostatycznego zadane w postaci wartości całkowitego prądu płynącego w przewodniku sygnałowym. Warunki brzegowe w strukturze od dowolnym kształcie, bez płaszczyzn symetrii wprowadza się za pomocą powierzchni rozdzielających. Takie sformułowanie problemu prowadzi jednak do szeregu...
-
Experiences with viscoplastic constitutive equations in finite element shell analysis
PublikacjaW pracy przedstawiono problemy zastosowania lekoplastycznych równań konstytutywnych w anlizie powłok metodą elementów skończonych. Pokazano historie rozwoju tego rodzaju modeli. Rozważono podstawowe założenia jakie muszą być zrobione.Omówiono doświadczenia konieczne do identyfikacji parametrów materiałowych modeli. Przedstawiono problemy jakie mogą wynikną w analizie numerycznej (problemy dokładności i stabilności algorytmów) Pracę...
-
Quasi-static finite-element analysis of a skewed microstrip crossover
PublikacjaPrzedstawiono quasi statyczną analizę skrzyżowania mikroskopowego na podłożu dielektycznym. Mikropaski znajdują się na różnych warstwach układu planarnego i mogą krzyżować się pod dowolnym kątem. Pojemności i indukcyjności obliczane są na podstawie rozkładu potencjałów skalarnych. W sformułowaniu zagadnienia magnestatycznego warunki brzegowe dla potencjału skalarnego wprowadzono za pomocą powierzchni rozcięcia dziedziny analizy....
-
Finite element description of nonlinear viscoelastic behaviour of technical fabric
PublikacjaW pracy podano propozycję nieliniowego modelowania zachowania się tkaniny technicznej. Podano wyniki identyfikacji i zweryfikowano poprzez numeryczną symulację prób laboratoryjnych
-
Mechanical model of fascia-implant structure. Finite element simulation.
PublikacjaPraca dotyczy modelowania i symulacji syntetycznych implantów chirurgicznych stosowanych w leczeniu przepulin brzusznych metodą laparoskowpową. Prponowane są modele matematyczne a ich prawidłowość weryfikowana jest na podstawie badań doświadczalnych zachowania się modeli fizycznych wszczepionych implantów pod wpływem obciążeń wynikających z fizjologii człowieka. Nakreślona jest metodologia oceny trwałości połączenia siatki chirurgicznej...
-
Portico Farmhouses of the Vistula Delta: Architecture, Current State and Finite Element Modelling of Timber Roof Truss under Material and Cross-section Uncertainty
PublikacjaThe article focuses on the oldest surviving I-type portico houses located in the Vistula Delta, which were built in the 17th and 18th centuries. The study describes the houses’ origins, structure, details of roof structures and technical condition, and it also includes numerical modelling of a roof truss and its mechanical analysis. Numerical models of the roof trusses are defined and analysed by means of the finite element method....
-
Influence of Installation Effects on Pile Bearing Capacity in Cohesive Soils – Large Deformation Analysis Via Finite Element Method
PublikacjaIn this paper, the whole process of pile construction and performance during loading is modelled via large deformation finite element methods such as Coupled Eulerian Lagrangian (CEL) and Updated Lagrangian (UL). Numerical study consists of installation process, consolidation phase and following pile static load test (SLT). The Poznań site is chosen as the reference location for the numerical analysis, where series of pile SLTs...
-
One Europe, one product, two prices - the price disparity in the EU
PublikacjaThe price dispersion in the European Union in the last fifteen years (1990-2005) is analysed. The analysis of price convergence is examined on aggregate and disaggregate levels. The macro approach is based on Comparative Price Level index calculated as the ratio between PPPs and exchange rate. The disaggregate analysis utilizesactual prices of 148 individual products sold in the 15 capital cities of the EU. The calculations comprise...
-
Wave propagation modelling in 1D structures using spectral finite elements
PublikacjaW artykule omówiono modele propagacji fal wzdłużnych i poprzecznych w prętach oparte na dwóch sformułowaniach (w dziedzinie częstości i w dziedzinie czasu) metody elemntów spektralnych. Porównano otrzymane wyniki z wynikami eksperymentu.
-
Comparative analysis of mechanical conditions in bone union following first metatarsophalangeal joint arthrodesis with varied locking plate positions: A finite element analysis
PublikacjaFirst metatarsophalangeal joint arthrodesis is a typical medical treatment performed in cases of arthritis or joint deformity. The gold standard for this procedure is arthrodesis stabilisation with the dorsally positioned plate. However, according to the authors’ previous studies, medially positioned plate provides greater bending stiffness. It is worth to compare the mechanical conditions for bone formation in the fracture callus...
-
Geometrically nonlinear finite element simulation of smart piezolaminated plates and shells
PublikacjaW pracy zaproponowano powłokowy element skończony pozwalający na uwzględnienie efektu piezoelektrycznego. Element został wykorzystany w podejściu Lagrange'a, które wymaga starannego dobrania definicji wielkości mechanicznych i elektrycznych. Zależności przemieszczenie-odkształcenie zbudowano na bazie teorii małych odkształceń i umiarkowanych obrotów. Założono liniowy rozkład pól odkształceń i pola elektrycznego po grubości powłoki....
-
Analysis of unsteady pipe flow using the modified finite element method
PublikacjaW pracy przedstawiono rozwiązanie równania przepływu nieustalonego zmodyfikowaną metodą elementów skończonych. Podejście to prowadzi do 6-punktowego schematu niejawnego z dwoma parametrami wagowymi. Analiza dokładności wykonana metodą równania zmodyfikowanego wykazała, że zaproponowany schemat zapewnia wyższą dokładność rozwiązania niż inne schematy. Porównanie wyników obliczeń z wynikami eksperymentu fizycznego wskazuje, że ich...
-
Modal energy identification of large stucture idealised by the finite element method
PublikacjaPrzedstawiono metodę określania energii drgań układów dyskretnych otrzyma-nych w wyniku modelowania metodą elementów skończonych wybranych fragmentów konstrukcji samochodów. W odróżnieniu od poprzednio stosowanych podejść, ro-zważa się całkowite energie mechaniczne odpowiadające poszczególnym posta-ciom drgań własnych. Całkowitą energię mechaniczną oblicza się na podstawie parametrów modelu modalnego. Energię mechaniczną można...