Wyszukiwarka
Wyniki wyszukiwania dla: RE-USE
-
Effect of selective laser treatment on initiation of fatigue crack in the main part of an undercarriage drag strut
PublikacjaThis paper presents the results of material characterization and a fatigue test conducted for a laser-re-melted drag strut used in an aircraft landing gear. The drag strut was re-melted with a CO2 laser beam. Eight re-melted paths were made in the form of spiral lines along the axis of the drag strut. Next, the drag strut was subjected to variable loads on a testing machine simulating loads occurring when an aircraft lands. The...
-
Creating private and public value in data-related management projects: a cross-border case study from Switzerland and Italy
PublikacjaThe literature in the field of smart cities shows a continuous emphasis and interest in the topic of big data due to the extensive use of Information and Communication Technologies by public and private institutions within each city. There is undoubtedly value in big data: in data lie insights on the city, its stakeholders, citizens, products, and services. Challenges, though, lie in data’s variety, volume, and velocity, but also...
-
Selectivity Tuning by Natural Deep Eutectic Solvents (NADESs) for Extraction of Bioactive Compounds from Cytinus hypocistis—Studies of Antioxidative, Enzyme-Inhibitive Properties and LC-MS Profiles
PublikacjaIn the present study, the extracts of Cytinus hypocistis (L.) L using both traditional solvents (hexane, ethyl acetate, dichloromethane, ethanol, ethanol/water, and water) and natural deep eutectic solvents (NADESs) were investigated in terms of their total polyphenolic contents and antioxidant and enzyme-inhibitive properties. The extracts were found to possess total phenolic and total flavonoid contents in the ranges of 26.47–186.13...
-
Exploring Impact of Requirements Engineering on Other IT Project Areas – Case Study
PublikacjaRequirements Engineering (RE) is recognized as one of the most important (yet difficult) areas of software engineering that has a significant impact on other areas of IT projects and their final outcomes. Empirical studies investigating this impact are hard to conduct, mainly due to the great effort required. It is thus difficult for both researchers and industry practitioners to make evidence-based evaluations about how decisions...
-
Enhanced photocatalytic properties of lanthanide-TiO2 nanotubes: An experimental and theoretical study
PublikacjaA series of Er-, Yb-, Ho-, Tb-, Gd-, Pr-TiO2 nanotubes (RE-NTs) was prepared via an electrochemical method. The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV–vis absorption, scanning electron microscopy (SEM) and luminescent spectroscopy. The experiments demonstrated that toluene in the gas phase was successfully degraded under visible light (LEDs λmax = 465...
-
Measurement data of cyclic voltammetry and electrochemical impedance measurements of carbon samples synthesized on axes and off axes
Dane BadawczeThe electrochemical performance of the multielectrode samples were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using a VMP-300 BioLogic galvanostat potentiostat (France) under the EC-lab software. All electrochemical investigations were carried out in a three-electrode cell system. The carbon multi-electrode,...
-
XPS analysis of TBBO glass
Dane BadawczeGlasses and glass-ceramics with nominal composition 73 TeO2– 4BaO– 3Bi2O3–18SrF2-2RE2O3 (where RE = Eu, Dy) have been synthesized by conventional melt-quenching technique and subsequent heat treatment at 370 °C for 24 h in air atmosphere. Various Eu3+ to Dy3+ molar ratio have been applied to investigate luminescence properties in both glass and glass-ceramic...
-
Contemporary Development Processes of Cities and Urban Areas
PublikacjaThe article deals with contemporary transformation of urban structures with special focus on Polish cities. The special attention is given to issues associated with re-urbanization and suburbanization of these within the framwork of principles of sustainable urban development
-
Negative Poisson’s ratio from pentagons: A new auxetic structure combining three different auxetic mechanisms
PublikacjaA novel class of two-dimensional auxetic structures based on the pentagon motif is proposed. Their mechanical properties are investigated by combining molecular mechanics simulations with a simple three-parameter mechanical model which assumes perfectly elastic behavior. It is predicted that the proposed structures – termed as double re-entrant honeycomb – may possess unique mechanical characteristics, which include complete and...
-
Płyty przedprożowe z elewacji dawnego budynku jatek mięsnych w Gdańsku?
PublikacjaPodczas badań archeologicznych prowadzonych w latach 2004-2005 na terenie historycznych jatek mięsnych głównomiejskiego cechu rzeźników w Gdańsku, kierujący badaniami Robert Krzywdziński postawił tezę, że fragmenty płaskorzeźbionej dekoracji ściany szczytowej od strony ulicy Mariackiej, zniszczonego w 1945 roku budynku jatek, zostały wykorzystane jako elementy dekoracyjnych płyt przedprożowych podczas powojennej odbudowy kamienicy...
-
Facilitating free travel in the Schengen area—A position paper by the European Association for Biometrics
PublikacjaDue to migration, terror-threats and the viral pandemic, various EU member states have re-established internal border control or even closed their borders. European Association for Biometrics (EAB), a non-profit organisation, solicited the views of its members on ways which biometric technologies and services may be used to help with re-establishing open borders within the Schengen area while at the same time mitigating any adverse...
-
A new simple approach to prepare rare-earth metals-modified TiO2 nanotube arrays photoactive under visible light: Surface properties and mechanism investigation
PublikacjaApplication of Ti90RE10 alloys (RE = Ho, Er, Nd, Y, Ce, Tm) as a working electrode, instead of Ti pure foil in anodic oxidation in a fluoride-based electrolyte, resulted in formation of well-ordered nanotubes made of TiO2 and RE2O3 mixture, which could be efficiently used for pollutant removal from water and air phase upon UV and visible irradiation and easily separable from the reaction mixture to recycle. The as-prepared NTs...
-
Numerical single-phase modeling of turbulent flow and heat transfer of nanofluids
PublikacjaIn this work, Nusselt number and friction factor are calculated numerically for turbulent pipe flow (6 000< Re < 12 000) with constant heat flux boundary condition using nanofluids. The nanofluid is modelled with the single-phase approach and the simulation results are compared with published experimental data.
-
Hydrogen direct reduction and reoxidation behaviour of high-grade pellets
PublikacjaHigh grade pellets with basicity index close to 0.5 were directly reduced in pure hydrogen atmosphere. The reduction experiments were performed in the temperature range 800 e1000 C at the pressure of 8 bar. The pellets internal structure was analysed through micro tomography observations in the unreduced and reduced conditions. After reduction, the pellets showed a variation of porosity up to more than 15% with a remarkable change...
-
Nieliniowy model matematyczny transformatora trójfazowego = Non-linear mathematical model of a three-phase transformer
PublikacjaPrzedstawiono model transformatora trójfazowego o rdzeniu trójkolumnowym, który zawiera układ rów-nań opisujących obwód magnetyczny oraz oddzielnie układ równań obwodu elektrycznego. Wydzielenie re-luktancji elementów rdzenia umożliwia uwzględnienie zmian względnej przenikalności magnetycznej w funkcji bieżącej wartości strumienia w rdzeniu. Re-luktancje odpowiadające strumieniom rozproszenia obliczono wg zasad klasycznych. Funkcję...
-
Chemistry of the phosphinophosphinidene tBu2P-P, a novel ă-electron ligand.Appl. Organomet. Chem. [online]**2003 vol. 17 [6 December 2002] s. 28-35, 10 rys. bibliogr. 53 poz. Dostępny w Internecie www.interscience.wiley.com Chemia fosfinofosfinidenu tBu2P-P, nowego liganda ă-elektronowego.
PublikacjaFosfanofosfiniden tBu2P-P w kompleksach z metalami przejściowymi jest z re-guły kompleksowany na sposób hapta-2 i przyjmuje geometrię 1,1-ditertbutyl-difosfenu. W reakcjach z cyklicznymi olefinami związek ten wykazuje właści-wości elektrofilowego singletowego karbenu.
-
Two-step synthesis of niobium doped Na–Ca–(Mg)–P–Si–O glasses
PublikacjaNiobium doped biosolubility glasses in the Na–Ca–(Mg)–P–Si–O system were prepared by using an untypical two-step synthesis route. The parent glass was melted in air atmosphere at 1350 °C followed by re-melting the glass in Nb crucible with the addition of metallic Mg/Ca powder in the nitrogen atmosphere. The second melting step was carried out at 1450–1650 °C, using an induction furnace. The topography and structure of the obtained...
-
Toward a universal Embedded-Atom Method: II. A set of transferable denisty and dimmer referenced embedding energy functions for all elements of the periodic table as tool for removing two gauge degrees of freedom in EAM potentials
PublikacjaZestaw kluczowych właściwości homodwuatomowych cząsteczek o Z ≤ 103 (równowagowa odległość między atomami re, energia dysocjacji DO, Liczba falowa drgań ωe) zostały zestawione na bazie dostępnych danych eksperymantalnych oraz obliczeń za pomocą teorii funkcjonałów gęstości elektronowej B3LYP/SBKJC.
-
Navier number and transition to turbulence
PublikacjaThe motivation behind this article is to explain a role of the Navier number (Na -dimensionless slip-length) in prediction of closures for laminar to turbulent transition undergoing via eddies detachment from the slip layer in nano-cannals. Additionally the role of the Navier number Na in universal modeling of phenomenon of enhanced mass flow rate reported in micro- and nano-channels has been explained. The Na number should be...
-
SDN testbed for validation of cross-layer data-centric security policies
PublikacjaSoftware-defined networks offer a promising framework for the implementation of cross-layer data-centric security policies in military systems. An important aspect of the design process for such advanced security solutions is the thorough experimental assessment and validation of proposed technical concepts prior to their deployment in operational military systems. In this paper, we describe an OpenFlow-based testbed, which was...
-
Rapid dimension scaling of compact microwave couplers with power split correction
PublikacjaIn this paper, a technique for rapid re-design ofcompact microwave couplers with respect to operating frequency is discussed. Our methodology involves an inverse surrogate model setup using several reference designs optimized (at the level of equivalent circuit representation of the coupler) for a set of operating frequencies within a range of interest. The surrogate establishes the relationship between the operating frequency...
-
Mobile Activity Plan Applications for Behavioral Therapy of Autistic Children
PublikacjaThis paper concerns technological support for behavioral therapy of autistic children. A family of tools dedicated for mobile devices is presented, that allows to design and perform an activity schedule in behavioral therapy. The paper describes the main challenges, that were encountered, especially in meeting the non-functional requirements of the application: simplicity, repeatability, robustness, personalization, re-usability...
-
Rapid redesign of multiband antennas with respect to operating conditions and material parameters of substrate
PublikacjaThis work addresses geometry parameter scaling of multi-band antennas for Internet of Things applications. The presented approach is comprehensive and permits re-design of the structure with respect to both the operating frequencies and material parameters of the dielectric substrate. A two-step procedure is developed with the initial design obtained from an inverse surrogate model constructed using a set of appropriately prepared...
-
Adaptive Method for Modeling of Temporal Dependencies between Fields of Vision in Multi-Camera Surveillance Systems
PublikacjaA method of modeling the time of object transition between given pairs of cameras based on the Gaussian Mixture Model (GMM) is proposed in this article. Temporal dependencies modeling is a part of object re-identification based on the multi-camera experimental framework. The previously utilized Expectation-Maximization (EM) approach, requiring setting the number of mixtures arbitrarily as an input parameter, was extended with the...
-
Membrane model of human abdominal wall. Simulations vs. in vivo measurements
PublikacjaThe study presents a methodology of defining a numerical model of human abdominal wall based on the experimentally registered data of the abdomen geometry due to variations of the intraabdominal pressure. The abdominal wall is modelled here as a simple homogeneous membrane structure made of linear orthotropic material The displacements registered during the increase of pressure are compared with the re-sults of the model static...
-
Prędkość opadania zakłóconego cząstek stałych w emulsjach
PublikacjaMierzono prędkość opadania zawiesiny cząstek stałych w emulsjach typu O/W. Badane emulsje wykazują własności reologiczne płynów newtonowskich. Stwierdzono, że w zakresie niskich wartości liczb Reynoldsa (Re<0,410, prędkość opadania cząstek stałych maleje eksponencjalnie ze wzrostem ułamka objętościowego ciała stałego w zawiesinie w emulsji.
-
Low-cost and reliable geometry scaling of compact microstrip couplers with respect to operating frequency, power split ratio, and dielectric substrate parameters
PublikacjaA technique for rapid re-design of miniaturised microstrip couplers with respect to operating conditions as well as material parameters of the dielectric substrate is proposed. The dimension scaling process is based on a set of pre-optimised reference designs, obtained for an equivalent circuit model of the coupler at hand. The reference designs are utilised to construct an inverse surrogate model which – upon suitable correction...
-
Thickness accuracy of sash gang sawing
PublikacjaThin lamellae, corresponding to the layer components of structural glued members, i.e. 2-ply or 3-ply glued parquet, can be manufactured in re-sawing operations of kiln-dried wood blocks. These must be prepared with high dimensional accuracy and adequate surface quality following specific technical requirements for lamellae thickness variations, especially in the upper layers of the glued composite parquet. The accuracy of oak...
-
Intelligent acquisition of audio signals, employing neutral networks and rough set algorithms
PublikacjaAlgorytmy oparte na sztucznych sieciach neuronowych i metodzie zbiorówprzybliżonych zostały zastosowane do lokalizacji sygnałów fonicznych obar-czonych pasożytniczym szumem i rewerberacjami. Informacja o kierunku napły-wania dźwięku była uzyskiwana na wyjściach tych algorytmów na podstawie re-prezentacji parametrycznej. Przedstawiono wyniki eksperymentalne i przepro-wadzono ich dyskusję.
-
Cost-Efficient Two-Level Modeling of Microwave Passives Using Feature-Based Surrogates and Domain Confinement
PublikacjaA variety of surrogate modelling techniques has been utilized in high-frequency design over the last two decades. Yet, the curse of dimensionality still poses a serious challenge in setting up re-liable design-ready surrogates of modern microwave components. The difficulty of the model-ing task is only aggravated by nonlinearity of circuit responses. Consequently, constructing a practically usable surrogate model, valid across...
-
Robust algorithm for active feedback control of narrowband noise
PublikacjaThe problem of active control of narrowband acoustic noise is considered. It is shown that the proposed earlier feedback control algorithm called SONIC (self-optimizing narrowband interference canceller), based on minimization of the L2-norm performance measure, can be re-derived using the L1 approach. The resulting robust SONIC algorithm is more robust to heavy-tailed measurement noise, such as the αlpha-stable noise, than the...
-
Studying the Behaviour of Pedestrians and Drivers Within Pedestrian Crossings
PublikacjaEvery third road accident in Poland involves a pedestrian as a participant or, most of the time, a casualty. Pedestrian accidents are usually the result of complex situations and the outcome of a number of factors related to driver and pedestrian behaviour and road infrastructure. Safety depends largely on how well the traffic condition is perceived and on visibility in traffic. The re-lations between pedestrians and motorists...
-
9-(tert-Butylamino)acridine. Acta Cryst. E**2002 vol. 58 s. o458-o460, 2rys. 2 tab. bibliogr. 11 poz. 9(tert-Butyloamino)akrydyna.
PublikacjaTytułowy związek występuje w krysztale w aminowej formie tautomerycznej. Re-szta akrydyny jest lekko zgieta wzdłuż linii C9-N10. Orientacja grupy t-bu-tyloaminowej umożliwia sprzężenie pomiędzy parą elektronową azotu aminowegoi elektronami ă pierścienia akrydynowego. W strukturze krystalicznej wystę-puje wiązanie wodorowe pomiędzy atomem azotu pierścienia akrydynowego i eg-zocykliczną grupą NH.
-
Experimental investigations on heat transfer enhancement in shell coil heat exchanger with VARIABLE Baffles GEOMETRY
PublikacjaThe paper presents the possibility of using passive intensification of heat transfer in the form of baffles to increase the energy efficiency of the shell and coil heat exchanger. The experiment was carried out by using a modular coil heat exchanger in the form of an electric heater. Water was used as a working fluid with constant thermal-flow parameters at the inlet of the module. It should be noted that experiments were made...
-
Interactivity - New Architectural Philosophy / Interaktywność- nowa filozofia architektury
PublikacjaArtykuł dotyczy koncepcji interaktywnej architektury, stanowiącej odpowiedź wizjonerskich projektantów na dynamicznie zmieniające się potrzeby i wymagania jednostki, społeczeństwa i środowiska. Połączenie kinetycznych systemów architektonicznych z wbudowana komputacją umożliwia użytkownikom fizyczną re konfigurację przestrzeni architektonicznej w czasie rzeczywistym. Rolą architekta staje się zaprojektowanie pola oddziaływania...
-
Consolidating logs in varying formats into a structured repository = konsolidacja logów w zmiennych formatach do strukturalnego repozytorium
PublikacjaDuring multi-agent systems development, testing and re- search, possibly voluminous logs are created at distributed agent loca-tions. These logs describe individual agents behavior and state changes. To get the complete picture of the multi-agent system working, it is necessary to consolidate these logs and to store them in a format appropriate for diverse analyzes. Specic issues arise during consolidation if the log formats are...
-
Lanthanide co-doped TiO2: the effect of metal type and amount on surface properties and photocatalytic activity
PublikacjaPreparation of new rare earth metal-containing TiO2 nanocomposites (Nd3+/Er3+, Nd3+/Eu3+, Eu3+/Ho3+-TiO2) using sol–gel route and their photoactivity under visible and ultraviolet light is reported. The obtained photocatalysts were subsequently characterized by Brunauer–Emmett–Teller (BET) method, UV–Vis diffuse-reflectance spectroscopy (DRS), luminescence spectroscopy, X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction...
-
Logistical Aspects of Energy Conversion Efficiency in Marine Steam Power Plants in Off-Design Conditions
PublikacjaThe paper presents logistical aspects of energy conversion efficiency in off-design conditions. The main part of the article is based on results of thermodynamic calculation for large propulsion steam turbine under partial loads. Calculations are made on extended mathematical model of two proposed steam turbine thermodynamic cycles using Stodola’s cone law. The conclusion based on calculation re-sults contains importance of off-design...
-
Stochastic model for turbulent lubrication of slide journal bearing in ship technology.
PublikacjaTurbulentny przepływ smarujący ma zastosowanie w obliczeniach praktycznych siły nośnej poprzecznego łożyska ślizgowego dla wysokich prędkości obrotowych przy liczbach Taylora przekraczających wartość 41,2 względnie przy zmodyfikowanych liczbach Reynoldsa o wartościach Re[psi]=2. Główne wyniki pracy koncentrują się na wykazaniu zmian wartości ciśnienia i siły nośnej poprzecznego łożyska ślizgowego w przypadku turbulentnego, izotemicznego...
-
Effects of liquid phase modification on the performance of biotrickling filters
Dane BadawczeDataset presents the effects of liquid phase modification on the biotrickling filtration (BTF) performance of air polluted with toluene, ethylbenzene, xylene and styrene.
-
The newest researches and applications of treatment wetlands in sewage sludge management
PublikacjaIn the paper the newest researches and applications of treatment wetlands conducted by re-searchers of Civil and Environmental Faculty are presented. Among others it was proved that this technology could be successfully implemented for highly polluted wastewater treatment. Within the research project two multistage treatment wetlands, one for landfill leachate and the second for reject water from digested sewage sludge centrifugation,...
-
Chemical hazard in glacial melt? The glacial system as a secondary source of POPs (in the Northern Hemisphere). A systematic review
PublikacjaToxicity of compounds belonging to persistent organic pollutants (POPs) iswidely known, and their re-emission from glaciers has been conclusively demonstrated. However, the harmful effects associated with such secondary emissions have yet to be thoroughly understood, especially in the spatial and temporal context, as the existing literature has a clear sampling biaswith the best recognition of sites in the European Alps. In this...
-
How to Meet the Green Deal Objectives—Is It Possible to Obtain 100% RES at the Regional Level in the EU?
PublikacjaThe subject matter discussed in the article concerns the problem of the energy transformation of the European Union (EU) countries. In the case of the EU, the energy transformation has specific characteristics due to formal legal and institutional provisions. This means that the member states are obliged to implement the adopted Community Energy Strategy, which was defined under the European Green Deal. According to the EU policy,...
-
Expedited two-objective dimension scaling of compact microwave passives using surrogate models
PublikacjaGeometry scaling of compact microwave structures is a challenging problem because of complex relationships between the physical dimensions and electrical characteristics, mostly caused by considerable cross-couplings in densely arranged layouts. Here, a procedure for expedited dimension scaling of compact microwave couplers with respect to two independent criteria has been presented. Our approach involves inverse surrogate models...
-
Miernik elementów RLC na bazie układu ''programmable system On a Chip''
PublikacjaW artykule zaprezentowano miernik parametrów impedancyjnych oparty na układzie typu ''programmable system On a Chip'' firmy Cypress. Zawiera on w sobie mikroprocesor oraz reprogramowalne bloki analogowe i cyfrowe. Do budowy modelu wykorzystano układ CY8C26443, w którym zaimplementowano metodę pomiaru opartą na dyskretnym przekształceniu Fouriera pozwalającą, na podstawie zebranych próbek napięcia i prądu, wyznaczyć składowe Re...
-
Implementation of the digital receiver in multibeam long-range sonar
PublikacjaThe article presents the implementation of a digital receiver in multibeam long - range sonar. Developed by the authors of the article, the implementation was part of sonar modernisation on large Polish Navy ships. The article explains the structure of the receiver, its design details and requirements affecting the architecture. The technical solutions regarding the equipment and signal processing algorithms for determining receiving...
-
Comparative conformance cases for monitoring multiple implementations of critical requirements
PublikacjaThe paper presents the concept and the mechanism of comparative conformance cases which support conformance monitoring in situations where a standard or other set of requirements are being implemented at multiple sites. The mechanism is enabled by NOR-STA services which implement the TRUST-IT methodology and are deployed in the cloud in accordance with the SaaS model. In the paper we introduce the concept of comparative conformance...
-
Sensorless algorithm for sustaining controllability of IPMSM drive in electric vehicle after resolver fault
PublikacjaThis paper presents a sensorless algorithm designated for the emergency control of an interior permanent magnet synchronous motor (IPMSM) drive in electric or hybrid vehicle. The algorithm is based on analysing the derivatives of motor phase currents measured over the duration of particular inverter states. The method is computationally simple and does not require additional hardware since the derivatives are measured indirectly....
-
A Review of Reduction Methods of Impact of Common-Mode Voltage on Electric Drives.
PublikacjaIn this survey paper, typical solutions that focus on the reduction in negative effects resulting from the common-mode voltage influence in AC motor drive applications are re-examined. The critical effectiveness evaluation of the considered methods is based on experimental results of tests performed in a laboratory setup with an induction machine fed by an inverter. The capacity of a common-mode voltage level reduction and voltage...
-
Open-Set Speaker Identification Using Closed-Set Pretrained Embeddings
PublikacjaThe paper proposes an approach for extending deep neural networks-based solutions to closed-set speaker identification toward the open-set problem. The idea is built on the characteristics of deep neural networks trained for the classification tasks, where there is a layer consisting of a set of deep features extracted from the analyzed inputs. By extracting this vector and performing anomaly detection against the set of known...