Wyszukiwarka
Wyniki wyszukiwania dla: CONSTRUCTION, PLANNING
-
Global sensitivity analysis of membrane model of abdominal wall with surgical mesh
PublikacjaThe paper addresses the issue of ventral hernia repair. Finite Element simulations can be helpful in the optimization of hernia parameters. A membrane abdominal wall model is proposed in two variants: a healthy one and including hernia defect repaired by implant. The models include many uncertainties, e.g. due to variability of abdominal wall, intraabdominal pressure value etc. Measuring mechanical properties with high accuracy...
-
Hydrographic Multisensory Unmanned Watercraft
PublikacjaThis article describes the design of the unmanned surface vessel (USV) and the algorithms for planning the trajectories to be followed on measurement missions. The algorithms take account of the dynamically varying impacts of external forces (wind and surface current) on the vessel's motion. Feedback loops enable the counteraction of external factors that cause disturbance to the desired trajectory. The sensors installed on the...
-
Towards Experience-Based Smart Product Design for Industry 4.0
PublikacjaThis paper presents the concept of smart virtual product development (SVPD) system capable of supporting industrial product development process. It enhances the decision making process during different stages and activities involved in product development i.e. product design, manufacturing, and its inspection planning. The enhancement is achieved by using the explicit knowledge of formal past decision events, which are captured,...
-
Trajectory planning for Service Ship during emergency STS transfer operation
PublikacjaIn this paper trajectory for approaching during emergency STS transfer operation with oil spill is considered as a sequence of navigation manoeuvres in specific navigational environment. The designed way points - ship positions and speed are determined as reference values to support navigator in decision making during steering and to mitigate the risk of collision which mostly results from exceeding the speed limit of approaching....
-
Urban Freight Transport Demand Modelling and Data Availability Constraints
PublikacjaThe paper provides a review of urban freight transport demand modelling approaches confronted with constrains regarding adequate data provision from a perspective of the local authorities. Demand estimation models has been selected as a reference because they are the most representative in terms of inclusion of urban freight indicators which can be transformed into a decision-support tool for evaluation of freight measures. The...
-
Landscape perception and the teaching of it in Poland
PublikacjaA preliminary assessment of the state of knowledge of landscape perception is contained in this article. A survey was carried out of students of architecture and urban planning during the rural design course in the academic year 2017/2018. The pilot project involved the initial establishment of categories of the countryside image. It was assumed that the results represented students’ knowledge of the landscape characteristics and...
-
Methodology for hospital design in architectural education
PublikacjaThe architecture of a hospital should be a response to strong user requirements. Recommendations on how to shape the environment of such facilities are highly complex, integrating guidelines from many fields of science. If contradictions between them exist, the designer is required to set priorities for spatial activities. This issue is particularly important during architectural education. The learning process should include projects...
-
Knowledge management strategies in KIBS companies: A preliminary analysis
PublikacjaPurpose – The aim of this paper is to perform a preliminary analysis concerning the detection and examination of two possible opposite approaches to KM planning which will be referred to as deliberate and emergent KM strategies. The goal is to enhance our understanding of the variety of features KM strategies possess and, accordingly, to formulate categorisations that are in line with such characteristics. Design/methodology/approach...
-
Impact of Large-scale urban interventions on contemporary city centers. Gdansk case study. Wpływ przedsiewzięć urbanistycznych dużej skali na centra miast. Studium przypadku Gdańska
PublikacjaLarge scale urban interventions have become a common development practice in cotemporary cities, allowing achieving rapid changes in their urban structure. They can be analyzed taking into account various perspectives. Some of them include planning and development models, transformation of brownfields and other types of distressed urban areas, as well as consequences and results of their implementation in existing urban structures....
-
ERP migration strategies
PublikacjaPresja rynku na sferę produkcji i logistyki wymusza w niej przechodzenie do efektywnych i optymalnych kosztowo aplikacji IT. Niniejszy artykuł pokazuje zmiany paradygmatu projektowania i eksploatacji systemów ERP (Enterprise Resource Planning) koncentrując się na strategiach migracyjnych, niezbędnych w dynamicznym środowisku biznesowym. Dokonano analizy porównawczej wybranych zastosowań informatyki w przedmiotowym obszarze, akcentując...
-
Comparison of Single and Multi-Population Evolutionary Algorithm for Path Planning in Navigation Situation
PublikacjaIn this paper a comparison of single and multi-population evolutionary algorithm is presented. Tested algorithms are used to determine close to optimal ship paths in collision avoidance situation. For this purpose a path planning problem is defined. A specific structure of the individual path and fitness function is presented. Principle of operation of single-population and multi-population evolutionary algorithm is described....
-
Modelling of the Heat Flux Density Distribution for Laser Beam Welding
PublikacjaGreat interest of the laser beam welding in industry is a new theoretical task, making planning the welding procedure specification and the quality control of welded joints easier. Estimating and calculating the dimensions of a weld pool and temperature distribution near weld mainly concern heat source modelling. In the presented work calculations of welding pool shape and thermal field for cylindrical-powered-normally model of...
-
Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014
PublikacjaSince offshore wind turbine supporting structures are subjected to dynamic environments with time-varying loading conditions, it is important to model their dynamic behavior and validate these models by means of vibrational experiments. In this paper assessment of dynamical state of the structure is investigated by means of both: numerical modeling, and experimental modal analysis. In experimental modal analysis, capturing the...
-
The landscape in the informal education of the youngest
PublikacjaThe European Landscape Convention, adopted in 2000, aims to promote the protection, management and planning of landscapes and to organise cooperation on landscape-related issues. Countries that ratified the Convention undertook to introduce activities that would promote public education on the subject. In Poland, the Ministry of Education has identified schools as the place to implement...
-
The Optimum Dataset method – examples of the application
PublikacjaData reduction is a procedure to decrease the dataset in order to make their analysis more effective and easier. Reduction of the dataset is an issue that requires proper planning, so after reduction it meets all the user’s expectations. Evidently, it is better if the result is an optimal solution in terms of adopted criteria. Within reduction methods, which provide the optimal solution there is the Optimum Dataset method (OptD)...
-
High Rise Building: The Mega Sculpture Made Of Steel, Concrete and Glass
PublikacjaHigh rise building has transformed from providing not only the expansion of floor space but functioning as mega sculpture in the city. The shift away from economic efficiency driven need is only expected to grow in the future. Based on literature studies; after analysing planning documents and case studies, it was examined whether the presumption that gaining the maximum amount of usable area is the only driving factor; or if the...
-
From structures to landscapes – towards re-conceptualization of the urban condition
PublikacjaThis paper presents an original approach towards the phenomena of re-naturalization of cities and indicates its possible consequences for the urban design and planning strategies. It focuses on the ongoing shift “from structures to landscapes” in understanding urban conditions. While modern architecture introduced geomet-ric compositions against the background of nature, early modern theories of architects and sociologists started...
-
Application and evaluation of M-EPDG for performance analysis of Polish typical flexible and rigid pavements
PublikacjaThe main goal of the paper is to implement and evaluate the M-EPDG and the software AASHTOware to analyse the performance of new flexible and rigid pavements designed according to the Polish catalogues, which are comparable with analogous catalogues used in other European countries. For this purpose the site-specific inputs for Poland were determined and described in the paper as well as compared to the default input data used...
-
The analysis of the determination of points positions using photogrammetric methods
PublikacjaThis article was created as a result of research conducted within the master thesis. The purpose of the research was to analyze the accuracy of determining the actual position of the photographed points according to the calculated parameters. The accuracy of photos alignment was determined as parameters, which determine their external and internal orientation. In order to determine the location of the determined points, it was...
-
Shaping the competence of future spatial policymakers for small- and medium-sized towns
PublikacjaIn this article, the authors aim to present issues addressed within the framework of the architecture and spatial development courses offered by the Faculty of Architecture at Gdańsk University of Technology (FA-GUT), Gdańsk, Poland. These issues concern competence in the education of future spatial planners and their readiness to deal with the development challenges facing small- and medium-sized towns. Within the article, the...
-
EIA in teaching sustainable development and environmental protection in engineering education
PublikacjaA multifaceted approach in teaching the environmental impact assessment (EIA) as a way to stress the role of environmental education in technical sciences is the focus of this article. The EIA is an example of an effective tool that supports spatial planning in implementing sustainable development. The aim is to present the idea and benefits of a facilitative and collaborative approach in teaching the EIA, stressing the role of...
-
Three-dimensional printed trachea helps to design tailored treatment for tracheobronchomalacia
PublikacjaTracheobronchomalacia is a rare respiratory disease that is manifesting by impaired ventilation with expiratory collapse of the tracheal wall due to softening of the supporting cartilage and hypotonia of myoelastic elements [1]. Surgery is the mainstay of treatment. We report the case of 39 -year old man with exacerbation of chronic respiratory distress. The membranous wall of the trachea and the large bronchi was stretched to...
-
Portico Farmhouses of the Vistula Delta: Architecture, Current State and Finite Element Modelling of Timber Roof Truss under Material and Cross-section Uncertainty
PublikacjaThe article focuses on the oldest surviving I-type portico houses located in the Vistula Delta, which were built in the 17th and 18th centuries. The study describes the houses’ origins, structure, details of roof structures and technical condition, and it also includes numerical modelling of a roof truss and its mechanical analysis. Numerical models of the roof trusses are defined and analysed by means of the finite element method....
-
Rapid development of custom web application with ruby on rails framework on the example of group project system
PublikacjaTechnology industry labor market requires engineers with a good preparation for work with project's tasks and team cooperation skills. One of the way for achieve that abilities during technical university education are students group projects. Running of group projects at university brings new challenges, from recruitment of students with required skills for par-ticular project, to lack of industrial procedures and ready to use...
-
Application of a stochastic compartmental model to approach the spread of environmental events with climatic bias
PublikacjaWildfires have significant impacts on both environment and economy, so understanding their behaviour is crucial for the planning and allocation of firefighting resources. Since forest fire management is of great concern, there has been an increasing demand for computationally efficient and accurate prediction models. In order to address this challenge, this work proposes applying a parameterised stochastic model to study the propagation...
-
An analysis of domain-based ship collision risk parameters
PublikacjaAccording to a lot of contemporary research on ship collision avoidance the classic approach parameters – distance at closest point of approach (DCPA) and time to the closest point of approach (TCPA) – are not sufficient for estimating ship collision risk and for planning evasive manoeuvres. Consequently new measures are introduced, often utilizing the concept of a ship domain. Their drawback, up to this point, was the lack of...
-
Selected aspects of the surface quality of the wooden elements after planing
PublikacjaThe quality of the surface of wooden elements, that have been planed, has got a crucial meaning in the whole production process flow, since the obtained effects affect the quality of wooden surface after painting. The emergence of defects in most cases causes need to qualify workpiece as a scrap part or additional work activity must be done. In the paper selected results of the investigation of the effect of the cutting tool wear...
-
Evolutionary Planning of Safe Ship Tracks in Restricted Visibility
PublikacjaThe paper presents the continuation of the author's research on ship track planning by means of Evolutionary Algorithms (EA). The presented method uses EA to search for an optimal set of safe tracks for all ships involved in an encounter. Until now the method assumed good visibility – compliance with standard rules of the Convention on the International Regulations for Preventing Collisions at Sea (COLREGS, 1972). However, in restricted...
-
IDEA SMART CITY W KONTEKŚCIE ROZWOJU PRZEDSIĘBIORCZOŚCI NA PRZEDMIEŚCIACH
PublikacjaSmart City Concept in the Context of Enterpreneurship Development in Suburban Areas. Supporting innovation and knowledge within economic development, these are the goals of public managers, enthusiasts of the Smart City concept. It is questioned whether this concept is the best solution for regional development and efficient support to local entrepreneurship based on SMEs (small and medium enterprises). Moreover, the results of...
-
Typology of towns in the peripheries of Polish coastal regions: conclusions for urban policy
PublikacjaPeripheries means the land outside metropolitan areas. One of the main problemsin these areas is a lack of growth factors. Some towns can contribute to the developmentof these regions, because there are few such factors, and it is easier to create the newones, especially in urban policy.The subject of this paper is a typology of towns within the Polish peripheral coastalregions, limited to towns with more than 5 thousand inhabitants....
-
Comparison of methods for diagnosing marine IC engines based on working medium parameters including exhaust gas specific enthalpy
PublikacjaArticle points out methods currently used to diagnose marine engines in operation. The development of tools and programs for implementing these methods was pointed out. The problem of unsatisfactory measurement susceptibility of marine engines was highlighted. Three methods of parametric diagnosis are presented: measurement of in-cylinder parameters and in exhaust gas duct, numerical simulation due to computer software and calculations...
-
A Machine Learning Approach for Estimating Overtime Allocation in Software Development Projects
PublikacjaOvertime planning in software projects has traditionally been approached with search-based multi-objective optimization algorithms. However, the explicit solutions produced by these algorithms often lack applicability and acceptance in the software industry due to their disregard for project managers' intuitive knowledge. This study presents a machine learning model that learns the preferred overtime allocation patterns from solutions...
-
Project-Based Collaborative Research and Training Roadmap for Manufacturing Based on Industry 4.0
PublikacjaThe importance of the economy being up to date with the latest developments, such as Industry 4.0, is more evident than ever before. Successful implementation of Industry 4.0 principles requires close cooperation of industry and state authorities with universities. A paradigm of such cooperation is described in this paper stemming from university partners with partly overlapping and partly complementary areas of expertise in manufacturing....
-
Sustainable urban planning in the context of studentification of the inner city areas
PublikacjaThe social dimension of urban planning as well as the importance of local communities and civic participation are often underlined in contemporary urban renewal and revitalisation programmes based on the principles of sustainable development. British Urban Renaissance is one the most far-reaching and widely discussed urban regeneration strategies which aims at repopulation and social diversification of inner city areas and land...
-
Landscape as the tool of coherence in the land management of rural communes
PublikacjaEconomic and social transformation of rural areas in Poland after 1990 reveals itself through disintegration of previous spatial order. Building a new pattern requires a vision, which would counteract complex causes of disintegration. The latter belong to institutional domain of planning strategies and the area of common practices. Therefore, agreement on aims and means between spatial policy strategies and tactics of space users...
-
Space and spatial practices in times of confinement. Evidence from three European countries: Austria, France and Poland
PublikacjaIn the first half of 2020, millions of people were subjected to drastic restrictions aimed at limiting the spread of the Covid-19 disease. Austria, France and Poland have implemented a lockdown to varying degrees and for varying lengths of time. This is an unprecedented situation in Europe: until now, even in times of war, curfew measures have never been applied 24 h a day. The research presented in this article was carried out...
-
Development and validation of a model that includes two ultrasound parameters and the plasma D-dimer level for predicting malignancy in adnexal masses: an observational study
PublikacjaBackground: Pre-operative discrimination of malignant from benign adnexal masses is crucial for planning additional imaging, preparation, surgery and postoperative care. This study aimed to define key ultrasound and clinical variables and develop a predictive model for calculating preoperative ovarian tumor malignancy risk in a gynecologic oncology referral center. We compared our model to a subjective ultrasound assessment (SUA)...
-
Urban Project IV. Summer semester - ERASMUS
Kursy OnlineCourse Urban Project IV (AI_MK_28/1) SHAPING A NEW DISTRICT – WHITE RIVER (POL. BIAŁA RZEKA) IN THE CITY OF RUMIA The subject of the exercises is to design the spatial layout of the new district in the area of the so-called Small Tricity. The task of the group will be to develop initial design guidelines - layout and character of buildings, primar building parameters, service program. The planned construction of the new SKM...
-
Rospuda - czy wszędzie budować mosty?
PublikacjaStreszczenie - SummaryThe article presents the problem of planning transport system in the areas of high natural and landscape values. Bridges and roads crossing valuable areas undergo Environmental Impact Assessment (EIA) Procedure. This procedure in Poland is often treated only as formal requirement, not as an instrument helping to solve conflicts and to minimise negative environmental and landscape effects. The potential of...
-
An intelligent cellular automaton scheme for modelling forest fires
PublikacjaForest fires have devastating consequences for the environment, the economy and human lives. Understanding their dynamics is therefore crucial for planning the resources allocated to combat them effectively. In a world where the incidence of such phenomena is increasing every year, the demand for efficient and accurate computational models is becoming increasingly necessary. In this study, we perform a revision of an initial proposal...
-
NON-LINE ANALYSIS OF STIFFNESS IN COMPRESSION CONDITIONS
PublikacjaThe analyzes were aimed at demonstrating the influence of parameters describing the deformation of the structure on the uncertainty of critical force, and the impact of technological imperfections on stress uncertainty in compression conditions. In a linear buckling analysis, the problem is considered only for the initial, permanent state of the stiffness matrix. In the case of demonstrating the influence of initial deformations...
-
Framework for Structural Health Monitoring of Steel Bridges by Computer Vision
PublikacjaThe monitoring of a structural condition of steel bridges is an important issue. Good condition of infrastructure facilities ensures the safety and economic well-being of society. At the same time, due to the continuous development, rising wealth of the society and socio-economic integration of countries, the number of infrastructural objects is growing. Therefore, there is a need to introduce an easy-to-use and relatively low-cost...
-
APPLICATION OF APRIORI ALGORITHM IN THE LAMINATION PROCESS IN YACHT PRODUCTION
PublikacjaThe article specifies the dependence of defects occurring in the lamination process in the production of yachts. Despite great knowledge about their genesis, they cannot be completely eliminated. Authentic data obtained through cooperation with one of the Polish yacht shipyards during the years 2013–2017 were used for the analysis. To perform a simulation, the sample size was observed in 1450 samples, consisting of 6 models of...
-
Surpassing the Line: Urban-Oriented Strategies in the Development of Business Complexes in Poland
PublikacjaDevelopment trends regarding the business-related urban complexes seem to evolve from the “big-box” towards the more “multi-use” types of structures. Within it, the special role is reserved for places, which—due to economic, political, and geographical reasons—have not been previously considered as major business hubs. Only recently, places like cities in Central and Eastern Europe have become attractive locations for business...
-
Biznesplan dla zakładu podstawowej opieki zdrowotnej o rozszerzonej działalności na obszarze dzielnicy Gdańsk-Południe
PublikacjaIn recent years we have seen the dynamic development of medical services sector in Poland. Private health centres focus on aggressive development strategy. The role of primaryhealth care facilities, which provide services financed from the public funds, declined.The purpose of the article is to present methods of strategic planning which allow toopen new healthcare entity. The next purpose is to make in practice...
-
Overview of new product development strategies and models
PublikacjaMotivation: The motivation for the overview presented in this article is to provide a starting point for considering whether existing new product development methodology and its level of detail allows product teams to develop high-quality and business-effective product concepts. Aim: The aim of this article is recognise the current state of research into new product development methodology and to present the strategies and models...
-
MORPHOLOGY OF BUILDING DEVELOPMENT AS AN ELEMENT OF URBAN VENTIALTION SYSTEM
PublikacjaProblems related to air quality in large urban agglomerations (e.g., high concentration of pollutants, the urban heat island phenomenon) make it necessary to take comprehensive measures to improve air exchange in urban areas.The article concerns the relationship between wind phenomena observable in cities and the geometrical features of building development. The knowledge on the subject is already well-founded and has been intensively...
-
Participatory Budgeting in Poland – Missing Link in Urban Regeneration Process
PublikacjaIn last thirty years Poland has gone a long way toward democracy and decentralization. Role of public participation in planning is increasing rapidly and recently many new instruments of empowering the community is being introduced, participatory budgeting is one of the most important. On the other hand, urban regeneration is one of the most important challenges of polish cities are facing. Technical and transport infrastructure...
-
In search of a new relationship between nature and society
PublikacjaWe live in an era of breakthrough- not only in the literal sense of the word, but the breakthrough of the century or the millennium. New discoveries and the crisis present in the economy, society, religion and ecology forces a review of all universally accepted theories. Nature, ecology and environment are the key words used in every area of human activity. It has led to the development of a new scientific field- the philosophy...
-
Implementing a CSR Strategy in a Small Enterprise - a Case Study
PublikacjaAs a result of employees’ meetings conducted according to Kaizen workshops formula and seeking new development directions for the company (including CSR actions) various product and service innovations have been implemented. Also a market niche has been discovered, and as a consequence the company gained another profitable aspect of the business activity. The atmosphere and contribution in performing tasks have improved among...