Filtry
wszystkich: 6988
wybranych: 5108
wyświetlamy 1000 najlepszych wyników Pomoc
Wyniki wyszukiwania dla: efferent ducts
-
End of the hydrocarbon fuels' age?
PublikacjaHydrocarbon is still one of the most important natural treasures which has an enormous range of implementations in different sectors of the industry.
-
Testbed analysis of video and VoIP transsmission performance in IEEE 802.11 b/g/n networks
PublikacjaThe aim of the work is to analyze capabilities and limitations of different implementations of IEEE 802.11 technologies (IEEE 802.11 b/g/n), utilized for both video streaming and VoIP calls directed to mobile devices. Our preliminary research showed that results obtained with currently popular simulation tools can be drastically different than these possible in real-world environment, so, in order to correctly evaluate performance...
-
Hybrid all-cellulose reinforcement in polypropylene matrix biocomposites for injection moulding - influence of particle geometry and volume fraction on hybrid effect
PublikacjaThe presented study is focused on evaluation of influence of reinforcement volume fraction and geometry on the occurrence of positive hybrid effect by the hybridisation of man-made cellulose fibres (rayon viscose) with cellulose microparticle fillers applied in polypropylene matrix. Four volume fractions of reinforcement were used at 1:1 combination of short man-made cellulose fibres with cellulose microfillers of different aspect...
-
Neuroeconomy and Neuromarketing: The Study of the Consumer Behaviour in the COVID-19 Context
PublikacjaTo address the study of consumer behavior in the post-COVID-19 era, the present Research Topic brings together a set of papers that attempt to study how different factors triggered by the pandemic have achieved a significant effect on consumers' behavioral intentions. These papers examine different subtopics related to food, health products, collaborative economy and, of course, neuroscience. Globally, the objectives of this special...
-
A commercial of the shelf components for a unmanned air vehicle photogrammetry
PublikacjaA photogrammetry from a unmanned aerial vehicle (UAV) can be understood as a new measurement tool. Is introduces a low-cost alternatives for a traditional aerial photogrammetry. A commercial off-the-shelf products (COTS), that are commercially available for a costumers, are the standard manufactures products, not custom. COTS products are available in the commercial market and can be bought and used under government contract. That...
-
Experimental and Numerical Study on Pounding of Structures in Series
PublikacjaPounding between structures in series during earthquakes may cause serious damage in the structural elements. The aim of this paper is to show the results of an experimental and numerical study that is focused on pounding between more than two structures which may be described as “structures in series”. In this study, the shaking table experiments, as well as the numerical analyses, were performed using three tower models including...
-
MRM–MS of marker peptides and their abundance as a tool for authentication of meat species and meat cuts in single-cut meat products
PublikacjaThe abundance of protein markers in different types of meat cuts was explored in the context of authentication of raw meat (pork, beef and chicken) and processed meat products. Peptides originating from myoglobin (Mb) and myosin (My) were analyzed using multiple reaction monitoring mass spectrometry (MRM–MS). Analytical protocol was optimized for good repeatability (CV < 10%) and high sensitivity. The MS signal intensity of Mb...
-
Advanced Lithium-Ion Battery Model for Power System Performance Analysis
PublikacjaThe paper describes a novel approach in battery storage system modelling. Different types of lithium-ion batteries exhibit differences in performance due to the battery anode and cathode materials being the determining factors in the storage system performance. Because of this, the influence of model parameters on the model accuracy can be different for different battery types. These models are used in battery management system...
-
Impact of the Alkyl Side Chains of Cations and Anions on the Activity and Renaturation of Lysozyme: A Systematic Study Performed Using Six Amino‐Acid‐Based Ionic Liquids
PublikacjaThe impact of the structure of ionic liquid on the activity and renaturation of lysozyme from the hen egg white (HEWL) was investigated. A set of six ionic liquids based on morpholinium cation and N-acylated amino acids as anions were exploited. The matrix used was based on two homologous series: one with N-acetyl-L-valinate [Val] as a common anion and morpholinium cation with a different number of carbon atoms in the n-alkyl chain...
-
LEVEL OF DETAIL CATEGORIZATION FOR THE APPLICATION IN URBAN DESIGN
PublikacjaUrban planning and urban design involve complex processes that require detailed information about the visual information of a place at various scales. Different graphic tools, such as game engines, are evolving to use urban representation fields. The concept of "level of detail" (LOD) has been used to categorize the level of detail in AEC applications such as BIM and GML for urban representation models. However, there is a need...
-
Simple 2-D Direction-of-Arrival Estimation Using an ESPAR Antenna
PublikacjaIn this letter, it has been shown how an electronically steerable parasitic array radiator (ESPAR) antenna can be used for 2-D direction-of-arrival (DoA) estimation employing received signal strength (RSS) values only. The proposed approach relies on changes in RSS values recorded at the antenna output port observed for different vertical and horizontal directions, while antenna’s main beam sweeps 360° area around the ESPAR antenna. Based...
-
Characteristics, Chemical Modification Processes as well as the Application of Silica and its Modified Forms
PublikacjaThe variety of chemical modifications of the surface of silica and its modified forms cause thesematerials to find a consistently wider scope of application. In the publication, the characteristicsof silica, silica gel, aerogel and xerogel are presented. The obtainment, application and propertiesof these materials are discussed. Methods of chemical modifications of surface structures withthe use of different chemical compounds...
-
Reliable testbed for indoor positioning systems
PublikacjaThis paper proposes a test environment for indoor localization system, based on radio wave propagation prosperities. The following sections presents variety of problems from the assessment of the existing localization system to the analysis of inconveniences which occur when comparison of different localization systems is implemented. The problem is associated with different testing environments presented in published papers is...
-
Analysis of Agricultural and Engineering Systems using Simulation Decomposition
PublikacjaThis paper focuses on the analysis of agricultural and engineering processes using simulation decomposition (SD). SD is a technique that utilizes Monte Carlo simulations and distribution decomposition to visually evaluate the source and the outcome of different portions of data. Here, SD is applied to three distinct processes: a model problem, a nondestructive evaluation testing system, and an agricultural food-water energy system....
-
Impact of radio wave polarisation on off-body communications in indoor environments
PublikacjaThis paper describes the measurements and the analysis of the impact of radio wave polarisation on off-body communications in Body Area Networks in indoor environments. Measurements on polarisation impact are briefly described. Five investigated scenarios with different body postures and different antenna placements are characterised. The difference between the vertical and horizontal components of the received radio signal are...
-
Effect of organic nitrogen concentration on the efficiency of trickling filters
PublikacjaThe study was conducted in Poland at six selected wastewater treatment plants (WWTP) based on the trickling filters Bioclere® technology. The aim of the study was to find the relationship between the influent organic nitrogen concentration and the purification efficiency expressed as effluent COD concentration. In the tests performed, the COD to BOD5 relationship was close to 2 and the ratio of BOD5 to TN was lower than 4. The...
-
Asymptotic behaviour in the set of nonhomogeneous chains of stochastic operators
PublikacjaWe study different types of asymptotic behaviour in the set of (infinite dimensional) nonhomogeneous chains of stochastic operators acting on L1(μ) spaces. In order to examine its structure we consider different norm and strong operator topologies. To describe the nature of the set of nonhomogeneous chains of Markov operators with a particular limit behaviour we use the category theorem of Baire. We show that the geometric structure...
-
Mobile operators at war: opinion mining and sentiment analysis on social media
PublikacjaConsidering hermetic and very competitive market such as mobile operator ones, social media has become best alternative for contact with customer and gathering data and opinions. Different style of running social media profiles is giving different results. The research presented in this paper aims to show the number of responses gathered from polish Internet users and its sentiment for mobile operator brands. It also presents practical...
-
Performance Analysis of Convolutional Neural Networks on Embedded Systems
PublikacjaMachine learning is no longer confined to cloud and high-end server systems and has been successfully deployed on devices that are part of Internet of Things. This paper presents the analysis of performance of convolutional neural networks deployed on an ARM microcontroller. Inference time is measured for different core frequencies, with and without DSP instructions and disabled access to cache. Networks use both real-valued and...
-
Shrinking-shifting and amplifying-shifting device using transformation optics
PublikacjaBased on transformation optics (TO), this paper uses geometric divisions and linear coordinate transformations to design “shrinking-shifting—and reshaping”, and “amplifying-shifting—and reshaping” devices. The proposed devices can reshape the sizes and locations of the wrapped-objects inside the core-region. The shrinking-shifting device shrinks the larger object into a smaller one and shifts it to different location, whereas the...
-
Development of a simulation model of the activities of a transport and forwarding enterprise in the organization of international road cargo transportation
PublikacjaThe object of this study is the process of planning the work of a transport and forwarding company when serving different categories of customers who need organizational support for the delivery of goods by road transport in international traffic. The solved problem is due to the need to devise recommendations for organizing the work of forwarders when interacting with customers of transport and forwarding services that export...
-
Experimental study on the effectiveness of polymer dampers in reduction of structural vibrations
PublikacjaVibrations of civil engineering structures, generated by dynamic loads, may be very dangerous to the structures themselves as well as may have significant influence on human perception and comfort. A number of different methods have been proposed in order to minimize such situations. This concern newly designed structures as well as those which dynamic properties have to be modified due to problems with excessive vibrations. One...
-
Experimental study on effectiveness of polymer dampers in reduction of structural vibrations
PublikacjaVibrations of civil engineering structures, generated by dynamic loads, may be very dangerous to the structures themselves as well as may have significant influence on human perception and comfort. A number of different methods have been proposed in order to minimize such situations. This concern newly designed structures as well as those which dynamic properties have to be modified due to problems with excessive vibrations. One...
-
Predicting the peak structural displacement preventing pounding of buildings during earthquakes
PublikacjaThe aim of the present paper is to verify the effectiveness of the artificial neural network (ANN) in predicting the peak lateral displacement of multi-story building during earthquakes, based on the peak ground acceleration (PGA) and building parameters. For the purpose of the study, the lumped-mass multi-degree-of-freedom structural model and different earthquake records have been considered. Firstly, values of stories mass and...
-
The Influence of Loop Heat Pipe Evaporator Porous Structure Parameters and Charge on Its Effectiveness for Ethanol and Water as Working Fluids
PublikacjaAbstract: This paper presents the results of experiments carried out on a specially designed experimental rig designed for the study of capillary pressure generated in the Loop Heat Pipe (LHP) evaporator. The commercially available porous structure made of sintered stainless steel constitutes the wick. Three different geometries of the porous wicks were tested, featuring the pore radius of 1, 3 and 7 um. Ethanol and water as two...
-
Comparative 3D DEM simulations of sand–structure interfaces with similarly shaped clumps versus spheres with contact moments.
PublikacjaThree-dimensional simulations of a monotonic quasi-static interface behaviour between initially dense cohesionless sand and a rigid wall of different roughness during tests in a parallelly guided direct shear test under constant normal stress are presented. Numerical modelling was carried out by the discrete element method (DEM) using clumps in the form of convex non-symmetric irregularly shaped grains. The clumps had an aspect...
-
Importance of sign conventions on analytical solutions to the wave-induced cyclic response of a poro-elastic seabed
PublikacjaThis paper discusses the influence of different sign conventions for strains and stresses, i.e. the solid mechanics sign convention and the soil mechanics sign convention, on the form of governing partial differential equations (the static equilibrium equations and the continuity equation) used to describe the wave-induced cyclic response of a poro-elastic seabed due to propagation of a sinusoidal surface water-wave. Some selected...
-
The Analysis of Container Vessel Service Efficiency in the Aspect of Berth and Handling Equipment Usage in Polish Ports
PublikacjaThe paper analyses the efficiency of container vessel service in Polish container terminals taking under considerations different berth layouts and handling equipment.
-
Biodegradable Polymer Packaging Materials in Seawater Environment
PublikacjaIn this chapter, our interest is directed into dea/ocean/lakes biodegradable environment for polymer packaging materials from two different points of view.
-
Jahn-Teller and related conical intersections in the benzene radical cation and the monofluoro derivate
PublikacjaThe multi-state multi-mode vibronic interactions in the benzene radical cation and its monofluoro derivative have been investigated theoretically, based on high-level electronic structure calculations for the system parameters and a quantum treatment of the nuclear motion. The available experimental data are well reproduced. The interplay of different vibronic coupling mechanisms is pointed out leading to multiple nonadiabatic...
-
Empirical Propagation Model for the Container Terminal Environment
PublikacjaIn the paper the empirical propagation model for mobile radio links in a container terminal environment is presented and the investigated environment Deepwater Container Terminal in Gdansk, Poland) is characterized. Described empirical model was elaborated on the basis of almost 290 thousand propagation path measurements in real conditions. The diversity of conditions occurring in different places of the container terminal has...
-
Techniques of acquiring additional features of the responses of individual gas sensors
PublikacjaGas sensors usually exhibit lack of selectivity, require fre quent calibration, exhibit drift of the response and a lot of factors, such as humidity or ambient temperature, influen ce their performance. Different approaches can be used to overcome this shortcomings. Building arrays of different sensors and usage of pattern recognition methods to analyze responses of elements...
-
Digital divide - inequalities in level of implementation of new information and telecommunication technologies. Cross country study
PublikacjaTekst stanowi analizę nierówności stopnia wdrożenia oraz implementacji ICTs w różnych krajach świata. Autor szacuje wskaźnik GINI dla możliwych krajów świata.In the paper presented, the author considers few aspects of the so-called "digital divide". It is easily noticeable worldwide, that new information and communication technologies (ICTs) "possess" a great ability to spread, at high pace, among countries from all around the...
-
Virtual tour as an innovative tool for architectural education - from understanding heritage to creativity stimulation
PublikacjaThe article presents the potential of the virtual tour in architectural education as an innovative tool to better understand heritage and stimulate creativity. A methodology for creating a virtual tour based on a point cloud obtained from a survey based on 360° camera images is presented. Two different purposes for the use of point clouds are presented from reliable indicators of heritage documentation useful for digital twin modelling...
-
Bioactive compounds and the antioxidant capacity in new kiwi fruit cultivars
PublikacjaThe aim of this investigation was to find the best among seven different kiwi fruit cultivars (‘Hayward’, ‘Daheung’, ‘Haenam’, ‘Bidan’, ‘Hort16A’, ‘Hwamei’ and ‘SKK12’) for human consumption and to classify them as groups. Therefore, the contents of bioactive compounds and the level of antioxidant capacities of these cultivars were determined in four different extracts and compared. It was found that the contents of the bioactive...
-
Feasibility Study for Food Intake Tasks Recognition Based on Smart Glasses
PublikacjaIn this exploratory study 13 adult test subjects have performed different food intake tasks while wearing a three axis accelerometer mounted at a temple of glasses. Two different algorithms for task recognition have been applied and compared. The retrospective data processing leads to better task recognition results when the frequency range of 50 Hz to 100 Hz is analysed within accelerometer signal recordings. A straightforward...
-
Evaluation of Respiration Rate Using Thermal Imaging in Mobile Conditions
PublikacjaRespiratory rate is very important vital sign that should be measured and documented in many medical situations. The remote measurement of respiration rate can be especially valuable for medical screening purposes (e.g. severe acute respiratory syndrome (SARS), pandemic influenza, etc.). In this chapter we present a review of many different studies focused on the measurements and estimation of respiration rate using thermal imaging...
-
Advanced numerical modelling for predicting residual compressive strength of corroded stiffened plates
PublikacjaAn advanced methodology for predicting the residual compressive strength of corroded stiffened plates is developed here using the non-linear finite element method. The non-uniform loss of a plate thickness is accounted for on a macro-scale. In contrast, mechanical properties are changed using the constitutive model to reflect the corrosion degradation impact on a micro-scale. Three different stiffened plate thicknesses are considered,...
-
Recycling of Polyurethanes Containing Flame-Retardants and Polymer Waste Transformed into Flame-Retarded Polyurethanes
PublikacjaThe growing number of polyurethanes (PUs) produced every year has developed methods for their mechanical and chemical recycling which yield valuable products like substitutes for commercial polyols or flame-retardants. PUs can be produced in different shapes and forms (i.e., elastomers, flexible or rigid foams, coatings, etc.) using several different components (i.e., di- or polyisocyanates, ester- or ether-based polyols, low-molecular...
-
MPPT and GMPPT Implementation for Buck-Boost Mode Control of quasi-Z-Source Inverter
PublikacjaThe focus is on the maximum power point tracking implementation for the buck-boost voltage mode control of a single-phase multilevel inverter based on a three-level neutral point clamped quasi-Z-source topology. To utilize shoot-through states only when boost function is needed and avoid it in the buck mode, two different control approaches are required. This work proposes merged control system which provides switching between...
-
Pose-Invariant Face Detection by Replacing Deep Neurons with Capsules for Thermal Imagery in Telemedicine
PublikacjaAbstract— The aim of this work was to examine the potential of thermal imaging as a cost-effective tool for convenient, non- intrusive remote monitoring of elderly people in different possible head orientations, without imposing specific behavior on users, e.g. looking toward the camera. Illumination and pose invariant head tracking is important for many medical applications as it can provide information, e.g. about vital signs, sensory...
-
IMPLANT USED IN HERNIA REPAIR UNDER PHYSIOLOGICAL MOVEMENTS OF HUMAN ABDOMEN
PublikacjaThe study deals with the mechanical behaviour of implant used in repair of abdominal hernia. The influence of orientation of the orthotropic implants in different areas of abdominal wall is studied.
-
Badania eksperymentalne i symulacyjne dynamiki modelowego odcinka sieci trakcyjnej
PublikacjaW pracy przedstawiono główne założenia i strukturę opracowanego modelu matematycznego odcinka kolejowej górnej sieci trakcyjnej, opartego na metodzie energetycznej Lagrange’a. W celu wyznaczenia wybranych parametrów modelu, jak również dla oceny stopnia zgodności odwzorowania przez utworzony program symulacyjny stanów statycznych i dynamicznych sieci zbudowano laboratoryjny model odcinka sieci jezdnej z użyciem rzeczywistych jej...
-
Comparing phylogenetic trees using a minimum weight perfect matching
PublikacjaA phylogenetic tree represents historical evolutionary relationshipbetween different species or organisms. There are various methods for reconstructing phylogenetic trees.Applying those techniques usually results in different treesfor the same input data. An important problem is to determinehow distant two trees reconstructed in such a wayare from each other. Comparing phylogenetic trees is alsouseful in mining phylogenetic information...
-
Hierarchical random models in road transport safety
PublikacjaIn this paper multilevel approach to the issue of road safety level on the road network of European regions, classified as NUTS 2 in statistical databases of the EU, has been presented. The risk calculated as the number of death casualties in road accidents per 100,000 inhabitants of a given region has Poisson distribution. Therefore, generalized Poisson model has been assumed in the modelling process. Multilevel stochastic analysis...
-
Parametric analysis of Istanbul's Ring Road viaduct for three levels of seismic load
PublikacjaThe paper presents a numerical analysis of the Istanbul's ring road viaduct that is currently under construction within the Northern Marmara Highway project. The structure, due to its location on seismic prone areas is exposed to seismic loads of different magnitude and different return periods. The study is fo-cused on concrete bridge supports that are design to work in nonlinear range. The study, conducted in SOFISTIK environment,...
-
Radionuclides activity and effective doses referred to geological formations
PublikacjaNaturally occurring radioactive materials (NORM) are present in Earth’s crust and they caused natural background radiation, variable in different regions. Liquid, gas and solid radionuclides emit three types of radiation – alpha, beta and gamma. Fluctuations of natural radioactivity in different geological formations in the world and in Poland were compared in relation to radiological hazard. Also drilling cuttings from boreholes...
-
GPR simulations for diagnostics of a reinforced concrete beam
PublikacjaThe most popular technique for modelling of an electromagnetic field, the finite difference time domain (FDTD) method, has recently become a popular technique as an interpretation tool for ground penetrating radar (GPR) measurements. The aim of this study is to detect the size and the position of damage in a reinforced concrete beam using GPR maps. Numerical simulations were carried out using the finite differ-ence time domain...
-
Assesment of (Mn,Co)3O4powders for possible coating material for SOFC/SOEC interconnects
PublikacjaIn this work (Mn,Co)3O4 spinel powders with different Mn:Co ratio (1:1 and 1:2) and from different commercial suppliers are evaluated for possible powder for production of interconnect coatings. Sinterability of the powders is evaluated on pressed pellets sintered in oxidizing and in reducing/oxidizing atmospheres. For selected powder, coatings are then prepared by the electrophoretic deposition method on Crofer 22 APU stainless...
-
Bearing capacity of the working platform with kinematic method
PublikacjaBearing capacity of the working platform for heavy tracks was analysed using Distinct Layout Optimization (DLO) method. The platform layer constructed from cohesionless soils is resting on weak cohesive subgrade. Different thickness of the platform, its effective angle of internal friction and undrained shear strength of the soft soil were taken into consideration. Kinematic method permits different failure mechanisms to be analyzed....