Search
Catalog Publications
Publications starting with: E clear
Filters
total: 4645
displaying 1000 best results Help
Catalog Publications
Year 2025
-
Early-Age Hydration Reaction of Cement Mortars with the Participation of Aluminosilicate Microsphere Fractions
PublicationThe paper presents the influence of two fractions (M1 and M2) of aluminosilicate microspheres in the amount of 0.0%, 1.5%, 3.5%, and 5% as a cement substitute on the early heat of hydration of cement mortars assessed by isothermal calorimetry (IC). The study results showed a higher accumulated heat of hydration for cement mortars with 1.5% of the test material for both grain fractions. In turn, mortars with 3.5% and 5% of smaller...
-
Effect of AlF3 and KF addition on the structure and luminescent properties of P2O5 – K2O – Nb2O5 – Bi2O3 glasses doped with Eu3+
PublicationBased on the developed phosphate glasses P2O5–K2O–Bi2O3–Nb2O5 doped with Eu3+, the influence of AlF3 and KF on the structural and luminescent properties was investigated. For this purpose, three series of glasses containing from 5 to 15 mol% fluorides were synthesized. Two of the series included the KF additive, which was introduced in two ways - proportionally and disproportionately at the expense of the K2O share. The structural characterization...
-
Effect of miR-223-3p and miR-328a-3p Knockdown on Allergic Airway Inflammation in Rat Precision-Cut Lung Slices
Publication -
Effect of rPET Content and Preform Heating/Cooling Conditions in the Stretch Blow Molding Process on Microcavitation and Solid-State Post-Condensation of vPET-rPET Blend: Part II—Statistical Analysis and Interpretation of Tests
PublicationThis research explores how varying proportions of virgin polyethylene terephthalate (vPET) and recycled polyethylene terephthalate (rPET) in vPET-rPET blends, combined with preform thermal conditions during the stretch blow molding (SBM) process, influence PET bottles’ microscopic characteristics. Key metrics such as viscosity, density, crystallinity, amorphous phase relaxation, and microcavitation were assessed using response...
-
Effect of water contamination of an environmentally acceptable lubricant based on synthetic esters on the wear and hydrodynamic properties of stern tube bearing
PublicationThe ecological aspects of the lubrication of stern tube bearings on ships represent a critical challenge today. Oil leakages are a typical issue, even for new systems, similarly to water ingress from the environment. One of the options for improving environmental protection is replacing mineral oil with an environmentally adaptable lubricant (EAL). This paper reports experimental investigations of the effect of water content in...
-
Effects of aggregate crushing and strain rate on fracture in compressive concrete with a DEM-based breakage model
PublicationW tym artykule zbadano, w jaki sposób kruche kruszywa wpływają na mezoskopowe zachowanie dynamiczne betonu w warunkach jednoosiowego ściskania. Przeprowadzono obszerne dynamiczne obliczenia dwuwymiarowe (2D), aby zbadać wpływ kruszenia kruszywa i szybkości odkształcania na dynamiczną wytrzymałość betonu i wzory pęknięć. Wykorzystując model pękania oparty na DEM, beton symulowano jako materiał czterofazowy składający się z kruszywa,...
-
Efficacy of modal curvature damage detection in various pre-damage data assumptions and modal identification techniques
PublicationThe efficacy of modal curvature approach for damage localization is discussed in the paper in the context of input data. Three modal identification methods, i.e., Eigensystem Realization Algorithm (ERA), Natural Excitation Technique with ERA (NExT-ERA) and Covariance Driven Stochastic Subspace Identification (SSI-Cov), and four methods of determining baseline data, i.e., real measurement of the undamaged state, analytical function,...
-
Ekspertyz techniczne zabytkowych obiektów budowlanych . Wybrane zagadnienia
PublicationWspółczesna tendencja do skracania czasu realizacji prac remontowo- naprawczych obiektów budowlanych będących zabytkami nieruchomymi, przy jednoczesnym ograniczaniu zakresu oraz stopnia szczegółowości dokumentacji projektowej, jak również często realizowane zmiany sposo- bu użytkowania obiektów zabytkowych wymagają zwrócenia szczególnej uwagi na zagadnienie właściwej oceny stanu technicznego tego typu obiek- tów prowadzonej na...
-
Electrifying the bus network with trolleybus: Analyzing the in motion charging technology
PublicationCurrently, electric buses are becoming more and more popular, and their number in operation is increasing. The range of electric buses is also increasing and solutions that seem to be working almost without fixed infrastructure are being promised. However, this requires the use of high-capacity batteries, which increases the weight and price of the vehicle and causes high costs of battery replacement during operation. Moreover,...
-
Elicited Production of Essential Oil with Immunomodulatory Activity in Salvia apiana Microshoot Culture
PublicationSalvia apiana Jepson is an endemic North American species characterized by a rich phytochemical profile including abietane-type diterpenoids, phenolic acids, flavonoids, and thujone-free essential oil (EO). The current study was aimed at increasing EO production in bioreactor-grown S. apiana microshoot culture through biotic elicitation using chitosan, ergosterol, and yeast extract (YE). Additionally, the immunomodulatory effects...
-
Elucidating charge transfer process and enhancing electrochemical performance of laser-induced graphene via surface engineering with sustainable hydrogel membranes: An electrochemist's perspective
PublicationLaser-induced graphene (LIG) has emerged as a promising solvent-free strategy for producing highly porous, 3D graphene structures, particularly for electrochemical applications. However, the unique character of LIG and hydrogel membrane (HM) coated LIG requires accounting for the specific conditions of its charge transfer process. This study investigates electron transfer kinetics and the electroactive surface area of LIG electrodes,...
-
Energy landscape and structural transformations of C38 penta-fullerene: The stabilizing role of octagons and insights into penta-octa-penta-fullerene
PublicationTheoretical investigations were conducted to study the stability and energy landscape of C38 penta-fullerene, a structure comprising six penta-graphene unit cells. Vibrational analysis at the B3LYP/def2SVP level revealed 18 negative frequencies, indicating the dynamic instability of penta-fullerene. Analyzing the energy profiles for these vibrational modes led to the identification of six energetically favourable isomers, featuring...
-
Enhanced electrochemical capacitance of TiO2 nanotubes/MoSe2 composite obtained by hydrothermal route
PublicationThis study presents the hydrothermal synthesis of a novel TiO2 nanotubes/MoSe2 nanocomposite and investigates its enhanced electrochemical capacitance properties. The composite material was fabricated through a hydrothermal method, embedding MoSe2 onto TiO2 nanotubes. The resulting composite, termed Ti/TiO2/MoSe2, exhibited significantly improved electrochemical capacitance compared to TiO2 nanotubes alone. The synthesized composite...
-
Enhanced electrochemical performance of sulfur-doped laser-induced graphene supercapacitors: Synergistic effects of doping and plasmochemical surface modification
PublicationThis work introduces a novel, scalable methodology for rapidly fabricating sulfur-doped laser-induced graphene with enhanced porosity and wetting characteristics, targeting advanced supercapacitor applications. An infrared laser scribing technique was employed to create a three-dimensional porous graphene network, with in-situ sulfur doping achieved through physical evaporation using powder precursor. A second-pass laser process...
-
Enhanced sorption of inhibitory compounds from fermentation broth using a MOF@pseudo-DES composite
PublicationThe increase in biorefinery processes underscores the need for effective biofuel generation; nevertheless, inhibitors such as hydroquinone (HQ), 5-hydroxymethylfurfural (HMF), furfural (FF), and vanillin (VAN) resulting from biomass degradation impede microbial growth and process efficiency. Herein, a deep eutectic solvent (DES)-like substance was in-situ generated on the surface of NH2-UiO-66 via a post-synthetic coating process...
-
Enhancing Internal Cooling Channel Design in Inconel 718 Turbine Blades via Laser Powder Bed Fusion: A Comprehensive Review of Surface Topography Enhancements
PublicationInconel 718, a widely utilized Ni-based superalloy in the aerospace industry, is renowned for its exceptional mechanical properties, high-temperature corrosion resistance, and thermal stability, making it an ideal material for turbine blades operating under extreme conditions of up to 2200 °C and high-pressure. Traditional single crystal casting, the prevalent manufacturing method for turbine blades, poses inflexibility challenges....
-
Environmental and toxicological aspects of sulfamethoxazole photodegradation in the presence of oxidizing agents
PublicationSulfamethoxazole (SMX) is a popular active substance, which is extensively applied to treat bacterial infections in humans and animals. Due to its widespread use, SMX enters the natural environment, where it can undergo degradation. Similarly to other emerging contaminants, SMX photodegradation and the use of oxidants in wastewater treatment processes can lead to the formation of potentially adverse transformation products for...
-
Evaluating oxide nanoparticle exsolution on A-site deficient PrBaCo2O6-δ electrodes
PublicationNanoparticle exsolution is a powerful technique for functionalizing redox oxides in energy applications, particularly at high temperatures. It shows promise for solid oxide fuel cells and electrolyzers. However, exsolution of other chemistries like metal oxides is not well studied, and the mechanism is poorly understood. This work explores oxide exsolution in PrBa1−xCo2O6−δ (x = 0, 0.05, 0.1, 0.15) double perovskites, practiced...
-
Evaluation of overstrength-based interaction checks for columns in steel moment frames
PublicationCurrent design guidelines in the United States require a check for only column axial force under overstrength seismic loads for capacity-designed steel moment frames. A study is presented to examine the implications of this guidance, which disregards the column interaction check (including both axial force and moment) under overstrength seismic loads. A set of thirteen steel moment frames are designed using multiple rules that...
-
Evaluation of Selected Modulation Techniques in Underwater Multipath Channel
PublicationThere is a growing interest in the use of Autonomous Underwater Vehicles (AUVs) and Underwater Sensor Networks (USNs) for scientific, military, and industrial applications, leading to the development of wireless underwater communications. However, the channel for Underwater Acoustic (UWA) communications is challenging compared to the radio wave propagation in the air. Especially in shallow waters, where the channel has strong multipath...
-
Evaluation of the Variability of Vibration Measurement Results in Rolling Bearing Quality Control
PublicationThe final result of rolling bearing quality control is influenced by many factors that are not always taken into account. If non-conforming products leave the factory, then the reliability of equipment containing rolling bearings is significantly weakened. The paper presents an analysis of the reasons for the variability of vibration measurement results in rolling bearing quality control. The paper describes the organisation of...
-
Examination of the effects of short-term oxidative stress on glucocorticoid conversion in marine mussels
Publication -
Excited states of mono- and biruthenium(II) complexes adsorbed on nanocrystalline titanium dioxide studied by electroabsorption spectroscopy
PublicationComprehensive characterization of the lowest energy electronic excited states for mono- and binuclear Ru(II) complexes containing bipyridine ligands has been performed by electroabsorption (EA) spectroscopy. The EA spectra of Ru complexes sensitizing a TiO2 semiconductor were compared with the spectra of these complexes in the form of solid neat films, both of which parametrized within the Liptay theory. The extracted values of...
-
Exergy analysis and thermodynamic optimization of a bioenergy with carbon capture and storage gas power plant using Monte Carlo simulation of sewage sludge composition
PublicationAn exergy analysis is performed on the negative CO2 emission gas power plant (nCO2PP), which integrates the fuel preparation, power generation and carbon capture process sections. The cycle is modeled in Aspen Plus coupled with REFPROP, combining deterministic and Monte Carlo stochastic approaches, the latter being a novelty in this work. In all cases studied, the simulations maintain the complex thermodynamic relationships. Exergy...
-
Experimental and Theoretical Study on Electron Interactions with Acetic Acid Molecules
PublicationThe absolute total cross section for electron collisions with acetic acid has been measured using an electrostatic electron spectrometerand linear transmission method for collision energies ranging from 0.4 to 300eV. Elastic electron scattering from acetic acid within a low-energy range has also been studied theoretically using the Schwinger multichannel and R-matrix methods, in the static-exchange and static-exchange plus polarization...
-
Experimental evidence of the excited-state mixing in the blue emitter for organic light-emitting diodes
PublicationHigh hopes have been placed on organic emitters, which are supposed to solve the problem of low stability of blue OLEDs. A peculiar phenomenon of thermally activated delayed fluorescence (TADF), which brought such emitters to the range of the top-studied materials for organic optoelectronics within the last decade, remains poorly understood. Here, we report the results of comprehensive photophysical studies of one of the most successful...
-
Experimental study of magnetorheological fluids under large periodic deformations
PublicationMagnetorheological (MR) fluids are smart materials whose properties can be controlled by a magnetic field. They are used in a variety of applications with tailored operating parameters, facilitating broad and relatively straightforward implementation and control of the functional properties of these systems. The aim of the study was to determine the variation in shear stress of MR fluids under varying...
-
Expert system against machine learning approaches as a virtual sensor for ventricular arrhythmia risk level estimation
PublicationRecent advancements in machine learning have opened new avenues for preventing fatal ventricular arrhythmia by accurately measuring and analyzing QT intervals. This paper presents virtual sensor based on an expert system designed to prevent the risk of fatal ventricular arrhythmias associated with QT-prolonging treatments. The expert system categorizes patients into three risk levels based on their electrocardiogram-derived QT...
-
Exploration of Behavioral Patterns and Cognitive Biases among Stock Market Investors
PublicationThis study aims to explore behavioral patterns and cognitive biases among stock market investors. By analyzing investor behavior through a stock market simulator, the research seeks to understand the impact of cognitive biases on investment decisions. The methodology encompasses a detailed analysis of transaction data to identify prevalent patterns and biases. Findings suggest that biases such as overconfidence, representativeness...
-
Exploring the role of carbon nitrides (melem, melon, g-C3N4) in enhancing photoelectrocatalytic properties of TiO2 nanotubes for water electrooxidation
Publication
Year 2024
-
Eco-friendly modification of bitumen: The effects of rubber wastes and castor oil on the microstructure, processability and properties
PublicationThe bitumen industry in the European Union is facing several difficulties, including rising demand, unstable oil supply, rising prices for synthetic polymer modifiers, and a focus on lowering carbon footprint. Bitumen modification with crumb rubber (CR) is one of the most promising solution to these challenges. However, CR-modified bitumen have poor processability and low storage stability. To overcome these flaws we are introducing...
-
Ecological traits predict population trends of urban birds in Europe
Publication -
Edible black ant Smith (Carebara vidua) as human food – A systematic review
PublicationMeeting food security is one of the major global challenges to ensure sufficient supply of food for current and future generations, considering increasing population growth and climate change issues. Consequently, the consumption of edible insects as an alternative food source has recently gained global attention for combating global food insecurity. The present review aims to provide information on the recent progress in consumption...
-
Edible dragonflies and damselflies (order Odonata) as human food – A comprehensive review
PublicationThe rapid growth of the human population leads to a big concern about the food y and demand worldwide. However, due to the reduction in global arable land area, humans need to find alternative food sources to fulfil their needs. Consequently, edible insects have been identified as a promising solution to ameliorate food security and increase global nutrition. Among more than 2,100 identified edible insect species, dragonflies and...
-
Edible Lepidoptera as human foods – a comprehensive review
PublicationAs the global population continues to grow, traditional protein sources like meat and fish are becoming increasingly unsustainable due to their environmental impact. Edible insects, on the other hand, are highly nutritious, require minimal resources to produce, and emit significantly fewer greenhouse gases than traditional livestock. Lepidoptera, one of the most diverse insect orders, contains some popular edible species that have...
-
Editorial: On poverty and its eradication
Publication -
Editorial: Social relevance of polar research: Part 1
Publication -
Editorial: Towards 2030: sustainable development goal 1: no poverty. A sociological perspective
Publication -
Editorial: Towards 2030: Sustainable Development Goal 11: sustainable cities and communities. A sociological perspective
Publication -
Editorial: Towards 2030: sustainable development goal 8: decent work and economic growth. A sociological perspective
Publication -
Editorial: Towards 2030: sustainable development goal 9: industry, innovation and infrastructure. A sociological perspective
Publication -
Edu Inspiracje WZiE: Czy mikrokwalifikacje i cyfrowe odznaki zmienią oblicze edukacji?
PublicationMikrokwalifikacje nazywane również mikropoświadczeniami (micro- -credentials), mówiąc prostymi słowami, są cyfrowymi certyfikatami potwierdzającymi uzyskanie umiejętności, wiedzy lub kompetencji. To dowody ukończenia mniejszych (niż określają np. dyplomy uniwersyteckie) form edukacyjnych takich jak kursy e-learningowe, warsztaty lub szkolenia. Pozwalają też szybko pokazać to, co umiemy, i przedstawić w postaci atrakcyjnego cyfrowego...
-
Edu Inspiracje WZiE: Czy testowanie pomaga w uczeniu się?
PublicationCzy zdarzyło się wam kiedyś, że przeczytaliście dobrą książkę, po czym nie potrafiliście opowiedzieć znajomemu, o czym właściwie była? Albo może braliście udział w ciekawej konferencji i z wielkim trudem próbowaliście sobie przypomnieć, czego się dowiedzieliście? Mam złą wiadomość. Padliście ofiarą zjawiska psychologicznego o nazwie iluzja kompetencji, które pojawia się, gdy np. z łatwością śledzimy argumentację nauczyciela...
-
EEG-Based Analysis of ASMR Stimuli: A Pilot Study of Neuropsychological Responses through Conventional vs. Bone-Conduction Headphones
PublicationIn this study, the impact of ASMR (Autonomous Sensory Meridian Response) experiences delivered through different types of headphones was evaluated with respect to neural responses and anxiety levels. The EEG data of a 24-year-old participant was recorded while he underwent ASMR stimulation using conventional and bone-conduction headphones. The State-Trait Anxiety Inventory (STAI) assessed anxiety levels before and after ASMR stimulation,...
-
Efektywność Praktycznego Nauczania w Przygotowaniu Studentów do Rynku Pracy Analiza i Wnioski z Badań Empirycznych
PublicationEfektywność praktycznego nauczania w przygotowaniu studentów do rynku pracy jest tematem o rosnącym znaczeniu, zwłaszcza w obliczu dynamicznych zmian, jakie zachodzą we współczesnej gospodarce. Zatrudnienie i bezrobocie są kluczowymi wskaźnikami, które odzwierciedlają stan gospodarki, a analiza sytuacji absolwentów różnych poziomów edukacji może pomóc zrozumieć, w jaki sposób edukacja wpływa na zdolność jednostek do znalezienia...
-
Effect of Agitation and Temporary Immersion on Growth and Synthesis of Antibacterial Phenolic Compounds in Genus Drosera
PublicationSundews (Drosera sp.) are the source of biologically active secondary metabolites: phenolic acids, flavonoids, and 1,4-naphtoquinones. Because obtaining them from the natural environment is impossible (rare and endangered species), in this study modifications of traditional tissue cultures grown in solid medium (SM), such as agitated cultures (ACs) (cultures in liquid medium with rotary shaking) and temporary immersion bioreactors...
-
Effect of applied standard wood machining fluid on colour and chemical composition of the machined wood surface
PublicationAppropriate monitoring of wood machining processes is a key issue to ensure the expected quality of the processed wood, expected efficiency and minimize energy consumption of production processes. A new trend is the design of environmentally friendly machining fluids. In this paper, as a preliminary study in this field, the effect of applied standard wood machining fluid on changes in the colour and chemical composition of the...
-
Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams
PublicationThe increasing interest in polyurethane materials has raised the question of the environmental impact of these materials. For this reason, the scientists aim to find an extremely difficult balance between new material technologies and sustainable development. This work attempts to validate the possibility of replacing petrochemical polyols with previously synthesized bio-polyols and their impact on the structure and properties...
-
Effect of bio-polyol molecular weight on the structure and properties of polyurethane-polyisocyanurate (PUR-PIR) foams
Publication -
Effect of composition on the thermal properties and structure of M-Al-Si-O-N glasses, M = Na, Mg, Ca
PublicationThe primary objective of this study is to explore the relationship between the composition, structure, and thermal characteristics of M-Al-Si-O-N glasses, with M representing sodium (Na), magnesium (Mg), or calcium (Ca). The glasses were prepared by melting in a quartz crucible at 1650 °C and AlN precursor (powder) was utilized as a nitrogen source. The measured thermal properties studied were glass transition temperature (Tg),...