Filters
total: 2845
filtered: 2641
displaying 1000 best results Help
Search results for: MEMBRANE-BASED TECHNOLOGIES, WATER PURIFICATION, NOVEL COMPOSITE MATERIALS
-
Novel MNZ-type microwave sensor for testing magnetodielectric materials
PublicationA novel microwave sensor with the mu-near-zero (MNZ) property is proposed for testing magnetodielectric material at 4.5 GHz. The sensor has a double-layer design consisting of a microstrip line and a metal strip with vias on layers 1 and 2, respectively. The proposed sensor can detect a unit change in relative permittivity and relative permeability with a difference in the operating frequency of 45 MHz and 78 MHz, respectively....
-
Novel method for metal-oxide glass composite fabrication for use in thermoelectric devices
PublicationA novel method for thermoelectric materials fabrication using a reduction of oxide precursors in hydrogen was reported. On the example of Bi-Sb, Bi-Sb-Te and Te-Ag-Ge-Sb compounds it was shown that this simple and easy method is suitable for fabrication of two-, three- and even multicomponent thermoelectric materials. It allows controlling a composition, microstructure and even type a of electrical charge carriers. As a result...
-
Recent Advances in Development of Waste-Based Polymer Materials: A Review
PublicationLimited petroleum sources, suitable law regulations, and higher awareness within society has caused sustainable development of manufacturing and recycling of polymer blends and composites to be gaining increasing attention. This work aims to report recent advances in the manufacturing of environmentally friendly and low-cost polymer materials based on post-production and postconsumer wastes. Sustainable development of three groups...
-
Estimation, optimization and analysis based investigation of the energy consumption in machinability of ceramic-based metal matrix composite materials
Publication -
Impact response of novel layered two stage fibrous composite slabs with different support type
PublicationThe performance of novel Layered Two Stage Fibrous Composite slabs (LTSFC) was pioneered under falling mass collisions using a combined experimental and numerical study. Such LTSFC slabs consist of three layers with and without the insertion of glass fibre mesh between the layers. LTSFC techniques were used to fabricate the composite slabs with three layers including 3%, 1.5%, and 3% of fibre content for the top, middle, and...
-
Studies of membrane scaling during water desalination by membrane distillation
Publication -
Novel temperature operated electrooptical materials based on K2ZnCl4: PVA polymer nanocomposites
Publication -
New materials and technologies used in chemical equipment design
Publication -
A comprehensive review on current and emerging technologies toward the valorization of bio‐based wastes and by products from foods
PublicationIndustries in the agro-food sector are the largest generators of waste in the world. Agro-food wastes and by products originate from the natural process of senescence, pretreatment, handling, and manufacturing processes of food and beverage products. Notably, most of the wastes are produced with the transformation of raw materials (such as fruits, vegetables, plants, tubers, cereals, and dairy products) into different processed...
-
Extraction pathways and purification strategies towards carminic acid as natural-based food colorant: A comprehensive review
PublicationAs a current trend of fabricating healthier products, food manufacturing companies seek for natural-based food colorant aiming to replace the synthetic ones, which apart from meeting sensorial and organoleptic aspects, they can also act as health promoters offering additional added value. Carminic acid is a natural based food colorant typically found in several insect taxa. However, there are current approaches which pursue the...
-
Cavitation-Based Processes for Water and Wastewater Treatment
PublicationCavitation based on advanced oxidation processes (Cav-AOPs) is interesting alternatives for already implemented wastewater treatment technologies. Destructive and strongly undesirable phenomena in the industry, i.e., cavitation, revealed to be useful in a positive manner as a source of energy for chemical reactions. During the implosion of cavitation bubbles, focused energy and resulting high temperature and pressure allows to...
-
FEM analysis of composite materials failure in nonlinear six field shell theory
PublicationThe monography deals with the problem of failure initiation in thin laminated composites. Known techniques of laminate structures modelling are briefly characterised. Eventually, shell based approach is chosen for the purpose of the description of the composite structures behaviour, as it predicts their deformation and states of stress effectively in a global sense. The nonlinear six parameter shell theory (6p theory) with asymmetric...
-
Failure Analysis of footbridge made of composite materials
PublicationFinite element method analysis of a pedestrian footbridge made of sandwich material is presented. The internal structure of the material is modelled as a structural shell assuming the Equivalent Single Layer approach (ESL). Two FEM commercial codes are employed. The response of the structure is studied in order to determine the load level that activates Hashin and Tsai-Wu failure criteria. Some practical aspects of designing footbridges...
-
Tribological Behaviour of Copper-Graphene Composite Materials
Publication -
Bilge water separation by membrane distillation
Publication -
Polysaccharides-Based Hybrid Materials for Bio- and Non-Bio Sectors. Edytorial
PublicationThis special edition spotlights the recent research in the design, development, and emerging applications of polysaccharides-based hybrid materials for biotechnological and biomedical purposes. All the articles published in this issue underscore the significance of materials derived from cellulose, alginate, chitosan, starch, and carrageenan for various applications, including enzyme production, encapsulation, targeted drug delivery,...
-
Chitosan-based nanomaterials for removal of water pollutants
PublicationThe rise of micropollutants presents a significant threat to both the environment and human well-being, requiring effective strategies for their mitigation. Chitin serves as the precursor for chitosan, composed of two monomers featuring acetamido and amino groups. Chitosan possesses several noteworthy attributes, including its ability to bind water and fat, humidity content, solubility, consistent molecular weight, and various...
-
Dynamics of Topology-dependent Water Purification by Siliceous Zeolite Membranes
Publication -
Application of the expanded clay aggregate in form of granular materials for water treatment
PublicationThe paper aimed to evaluate the efficiency of Filtralite MonoMulti compared to the conventional dual-media filter beds comprising silica sand layer covered with anthracite coal. Filtralite media are composed of processed (expanded), highly porous clay products characterized by relatively rough grain surfaces. In order to compare these different media filters in a reliable way, the pilot filter columns operated in parallel, under...
-
Performance of a single layer fuel cell based on a mixed proton-electron conducting composite
PublicationMany of the challenges in solid oxide fuel cell technology stem from chemical and mechanical incompatibilities between the anode, cathode and electrolyte materials. Numerous attempts have been made to identify compatible materials. Here, these challenges are circumvented by the introduction of a working single layer fuel cell, fabricated from a composite of proton conducting BaCe0.6Zr0.2Y0.2O3-δ and a mixture of semiconducting...
-
Iron(III)-selective materials based on a catechol-bearing amide for optical sensing
PublicationThe synthesis and ion-binding properties of a new amide L derived from 3,4-dihydroxybenzoic acid are described. Due to the presence of a catechol unit, the compound interacts selectively with iron(III) in organic solvent (dimethyl sulfoxide, DMSO) to produce a color change from pale yellow to green. The incorporation of the ligand L into polymeric matrices or its encapsulation into surfactant-based spheres enables analyte detection...
-
Novel composite of Zn/Ti-layered double hydroxide coupled with MXene for the efficient photocatalytic degradation of pharmaceuticals
PublicationIn the present study, a hybrid photocatalyst of Zn/Ti layered double hydroxide (LDH) coupled with MXene – Ti3C2 was synthesized for the first time and applied in photocatalytic degradation of acetaminophen and ibuprofen, two commonly present in the natural environment and prone to accumulate in the aquatic ecosystem pharmaceuticals. The effect of MXene content (0.5 wt%, 2.5 wt%, and 5 wt%) on the photocatalytic activity of LDH/MXene...
-
Studies on membrane scaling during water desalination by direct contact membrane distillation
Publication -
Polyphosphates used for membrane scaling inhibition during water desalination by membrane distillation
Publication -
Damage Detection in Composite Materials Using Hyperspectral Imaging
Publication -
Chapter 8. New composite materials for electrochemical capacitors
PublicationW pracy zaprezentowano materiały hybrydowe składające się z polimeru przewodzącego elektronowo połączonego z nieorganiczną siecią typu redoks. Te materiały to poli(3,4-etylenodioksytiofen) modyfikowany heksacyjanożelazianem (II/III) żelaza (pEDOT/Fehcf), kobaltu (pEDOT/Cohcf) i niklu (pEDOT/Nihcf).Materiały elektrodowe scharakteryzowano metodami elektrochemicznymi w elektrolitach niewodnych. Otrzymane materiały hybrydowe cechują...
-
Novel cast polyetherurethanes based on dispersed polymeric polyols
PublicationOur study was focused on obtaining polyetherurethanes synthesized with using polymeric polyether based polyols differing in dispersed copolymer content (10, 20 and 40 wt%). The polyetherurethane materials were synthesized via two step method. The influence of different polymeric polyether based polyols on the chemical structure, morphology, mechanical and thermal properties of the obtained polyetherurethanes was investigated. The...
-
Novel Biomass-Based Polymers: Synthesis, Characterization, and Application
PublicationA wide range of polymers were prepared from biomass-derivatives, using different polymerization mechanisms. Well-defined, fully hydroxy-functional polyesters based on aliphatic diols were synthesized, using either conventional metal-based catalysts or the organic superbase 1,5,7-triazabicyclododecene (TBD). Unsaturated polyesters were also made, offering additional functionality to these biobased resins. Metal-catalyzed or enzymatic...
-
Three-dimensional Web Geographic Information System using web-based technologies
PublicationWeb-based Geographic Information Systems offer a way of delivering geographic information to devices with small computational power, such as smartphones. In recent years, the rapid development of the Web Graphics Library (WebGL) made it possible to create rich interactive applications running inside a web browser and displaying three-dimensional objects using hardware acceleration. This paper presents a three-dimensional Web-GIS...
-
Semicrystalline Polyesters Based on a Novel Renewable Building Block
PublicationIsohexides, like e.g. isosorbide, are well-known carbohydrate-based rigid diols which are capable of dramatically increasing the glass transition temperature of polyesters. However, their relatively low reactivity has thus far hampered large-scale industrial applications in the polymer field. Recently, with the aim to increase reactivity while at the same time retain rigidity, we have developed a new isoidide dicarboxylic acid...
-
Chemical pretreatment of feed water for membrane distillation
Publication -
Effectiveness of Water Desalination by Membrane Distillation Process
Publication -
Electrode materials for electrochemical capacitors based on poly(3,4-ethylenedioxythiophene) and functionalized multi-walled carbon nanotubes characterized in aqueous and aprotic electrolytes
PublicationWithin this work, we report a facile one-stage synthesis of nanocomposites based on functionalized carbon nanotubes (CNTs) and electroactive polymer poly(3,4-ethylenedioxythiophene). Three different composites are investigated as potential electrode materials for the electrochemical capacitors. Two of the composites contain carbon nanotubes (ox-CNTs), functionalized by acid oxidation process (65% HNO3, 120 °C). The third composite...
-
Materials Design for the Titanium Scaffold Based Implant
PublicationThe main objective of here presented research is a design the scaffold/porous titanium(Ti) alloy based composite material demonstrating better biocompatibility, longer lifetime andbioactivity behaviour for load-bearing implants. The development of such material is proposed bymaking a number of consecutive tasks. Modelling the mechanical, biomechanical and biologicalbehavior of porous titanium structure and an elaboration of results...
-
Materials Design for the Titanium Scaffold Based Implant
PublicationThe main objective of here presented research is a design the scaffold/porous titanium(Ti) alloy based composite material demonstrating better biocompatibility, longer lifetime andbioactivity behaviour for load-bearing implants. The development of such material is proposed bymaking a number of consecutive tasks. Modelling the mechanical, biomechanical and biologicalbehavior of porous titanium structure and an elaboration of results...
-
Sonochemical Based Processes for Treatment of Water and Wastewater
PublicationSonochemical Based Processes for Treatment of Water and Wastewater - Opportunities and Challenges – A Future Perspective.
-
Thermal properties of a cement composite containing phase change materials (PCMs) with post-pyrolytic char obtained from spent tyres as a carrier
PublicationThis work examines the possible use of post-pyrolysis char made from spent vehicle tyres as a carrier for phase change materials (PCM), which could be used as an additive to cement mortar. Because of the ability of PCM to accumulate heat, the cement composite obtained from it, apart from its structural and strength properties, will acquire an additional energy storage function, which can be very important for energy-saving construction. In...
-
Novel anion receptors: hybrid materials based on quaternary ammonium salts for selective extraction of dichromate ions
Publication -
Semantic technologies based method of collection, processing and sharing information along food chain
PublicationIn the paper the method of collecting, processing and sharing information along food chain is presented. Innovative features of that method result from advantages of data engineering based on semantic technologies. The source to build ontology are standards and regulations related to food production, and data collected in databases owned by food chain participants. It allows food chain information resources can be represented in...
-
Novel Structures and Applications of Graphene-Based Semiconductor Photocatalysts: Faceted Particles, Photonic Crystals, Antimicrobial and Magnetic Properties
PublicationGraphene, graphene oxide, reduced graphene oxide and their composites with various compounds/materials have high potential for substantial impact as cheap photocatalysts, which is essential to meet the demands of global activity, offering the advantage of utilizing “green” solar energy. Accordingly, graphene-based materials might help to reduce reliance on fossil fuel supplies and facile remediation routes to achieve clean environment...
-
A theoretical probe into the effects of material and operational variables on water purification with zeolite membranes
Publication -
Possible application of new class of solvents in the purification of water used in hydraulic fracturing
PublicationNowym źródłem energii niekonwencjonalnej w Polsce może być gaz, który jest uwięziony w łupkach. Podczas poszukiwań gazu łupkowego, duże ilości wody wykorzystywanej w procesie szczelinowania hydraulicznego powracają na powierzchnię zanieczyszczone. Istnieje wiele metod usuwania śladowych ilości węglowodorów tj. fizyczne czyli filtracja czy chemiczne czyli zakwaszanie, ale mogą one być nieskuteczne. Pożądana metoda to monitorowanie...
-
Desalination of thermally softened water by membrane distillation process
Publication -
Membrane Distillation of Saline Water Contaminated with Oil and Surfactants
Publication -
Membrane processes used for potable water quality improvement
Publication -
Production of process water using integrated membrane processes
Publication -
The application of membrane distillation for the concentration of oil-water emulsions
Publication -
Novel Complementary Resonator for Dielectric Characterization of Substrates Based on Permittivity and Thickness
PublicationThis paper presents a novel complementary resonator featuring high sensitivity, low fabrication cost, and improved performance. The proposed structure consists of a complementary concentric square and circular ring resonator (CCSCRR) with multiple splits to enhance the inductance of the resonator. The proposed CCSCRR is coupled to a microstrip transmission line with an impedance of fifty ohms to create a high-sensitivity sensor....
-
Determination of volatile organic compounds in water samples using membrane-solid phase microextraction (M-SPME) (headspace version)
PublicationThe results of a study on the use of membrane-solid phase microextraction (M-SPME) for sampling volatile organic compounds (VOCs) from the headspace above the liquid medium are presented. The sampled VOCs were subsequently quantified by gas chromatography (GC). Two systems were compared in this study, i.e. a novel two-phase sorption system (M-SPME), and a commercial fibre. Headspace sampling using SPME was optimized with respect...
-
TiO2-based photocatalysts in indoor swimming pool air purification
PublicationWzrastająca ilość basenów kąpielowych i aquaparków jest obecnie wyzwaniem dla naukowców zajmujących się badaniem i kontrolowaniem powietrza hali basenowej. Mikroorganizmy powstałe w powietrzu hali stanowią ogromne zagrożenie dla zdrowia. Ponadto, w fazie gazowej obecne są także uboczne produkty dezynfekcji (DBP), które mogą mieć szkodliwy wpływ zarówno na kąpiących się, jak i personel. W pracy omówiono potencjalne zagrożenia spowodowane...