Search
Filters
total: 435
filtered: 422
Search results for: MANUFACTURING TECHNIQUES
-
Utilizing Cement Kiln Dust as an Efficient Adsorbent for Heavy Metal Removal in Wastewater Treatment
PublicationCement kiln dust (CKD), a by-product of cement manufacturing, has been largely underutilized despite its potential as an eco-friendly adsorbent for wastewater treatment. This study addresses the knowledge gap regarding CKD’s effectiveness in removing heavy metals from wastewater residuals. A comprehensive experimental program was conducted to optimize key parameters such as the pH (6–9), contact time, sorbent dosage, and initial heavy...
-
Mechanical Properties of Twisted Carbon Nanotube Bundles with Carbon Linkers from Molecular Dynamics Simulations
PublicationThe manufacturing of high-modulus, high-strength fibers is of paramount importance for real-world, high-end applications. In this respect, carbon nanotubes represent the ideal candidates for realizing such fibers. However, their remarkable mechanical performance is difficult to bring up to the macroscale, due to the low load transfer within the fiber. A strategy to increase such load transfer is the introduction of chemical linkers...
-
Cyclic deformation and fracture behaviour of additive manufactured maraging steel under variable-amplitude loading
PublicationThe cyclic deformation and fracture behaviour of 18Ni300 maraging steel produced by laser beam powder bed fusion is studied under variable-amplitude loading. The tests were conducted under fully-reversed strain-controlled conditions with a loading sequence comprising three ascending cycles and three descending cycles repeated sequentially until failure. After the tests, fracture surfaces were examined using height and volume surface...
-
Guided wave propagation in debonding detection in CFRP-reinforced steel plate-like structures
PublicationThe present study investigates the guided wave propagation in multilayered steel specimens reinforced with carbon fiber reinforced polymer (CFRP) through theoretical, numerical, and experimental means. The effectiveness of externally bonded reinforcement (EBR) relies heavily on the bonding quality between the CFRP and the substrate. Premature debonding, a prevalent and hazardous defect, can arise from suboptimal manufacturing processes,...
-
Overview of new product development strategies and models
PublicationMotivation: The motivation for the overview presented in this article is to provide a starting point for considering whether existing new product development methodology and its level of detail allows product teams to develop high-quality and business-effective product concepts. Aim: The aim of this article is recognise the current state of research into new product development methodology and to present the strategies and models...
-
Membrane distillation assisting food production processes of thermally sensitive food liquid items: a review
PublicationPhysical separation technologies have become important tool for processing in the current food manufacturing industries, especially for the products containing bioactive compounds thanks to their health benefits in costumers. As for the processing of bioactive food ingredients implies the implementation of integrated systems oriented to their separation, fractionation, and recovery. In this field, membrane distillation (MD), which...
-
Determinants of export diversification: an empirical investigation
PublicationEmpirical findings confirm that relatively high specialisation of economic structures tends to be associated with low levels of income per capita, but countries diversify their export structures along their path of growth. However, usually only per capita income, and eventually, country-specific fixed effects are the sole explanatory variables taken into consideration in the estimation of specialisation curves. We extend the analysis...
-
Empirical investigation on labour market interactions in an enlarged Europe
PublicationThis paper proposes an empirical assessment of economic interactions between the labour markets ofthe integrating EU over the period of time 1995-2005. Drawing on recently made available industrystatistics, we provide a sector level study (13 tradable sectors, including manufacturing and services),analysing the contemporary evolution of domestic and trade partners' employment levels. Given theintensification of trade relations...
-
Economical wood sawing with circular saw blades
PublicationMaterial- and energy-saving belong to the basic requirements which are imposed on the contemporary manufacturing processes. Since realization of those processes gives measurable profits not only economical but also ecological. In case of wood sawing with circular saw blades material- and energy-savings are dependent on total overall set of teeth (theoretical kerf) and teeth position accuracy in relation to the workpiece. Hence,...
-
Integrated Sectors - Diversified Earnings: The (Missing) Impact of Offshoring on Wages and Wage Convergence in the EU27
PublicationThis paper assesses the impact of international outsourcing/offshoring practices on the process of wage equalization across manufacturing sectors in a sample of EU27 economies (1995-2009). We discriminate between heterogeneous wage effects on different skill categories of workers (low, medium and high skill). The main focus is on the labour market outcomes of vertical integration, so we augment a model of conditional wage convergence...
-
Recycled Polyethylene terephthalate (PET) as Construction Material in Civil Engineering: A Review
PublicationIn general, the quantity of plastics of all types consumed annually all over the world has been growing in a phenomenal way. The manufacturing processes, service industries and municipal solid wastes (MSW) generate numerous waste plastic materials. The increasing awareness about the environment has tremendously contributed to the concerns related with disposal of the generated wastes. It is believed that the management of solid...
-
Integrated sectors - diversified earnings: the (mising) impact of offshoring on wages and wage convergence in the EU27
PublicationThis paper assesses the impact of international outsourcing/offshoring practices on the process of wage equalization across manufacturing sectors in a sample of EU27 economies (1995–2009). We discriminate between heterogeneous wage effects on different skill categories of workers (low, medium and high skill). The main focus is on the labour market outcomes of vertical integration, so we augment a model of conditional wage convergence through...
-
Advanced Modeling of Management Processes in Information Technology
PublicationThis book deals with the issues of modeling management processes of information technology and IT projects while its core is the model of information technology management and its component models (contextual, local) describing initial processing and the maturity capsule as well as a decision-making system represented by a multi-level sequential model of IT technology selection, which acquires a fuzzy rule-based implementation...
-
Wybrane aspekty oceny satysfakcji i lojalności klientów i pracowników
PublicationCelem artykułu jest przedstawienie propozycji oryginalnego modelu pozwalającego lepiej zrozumieć mechanizmy kształtowania się satysfakcji i lojalności klientów i pracowników oraz umożliwiającego porównywanie satysfakcji klientów różnych przedsiębiorstw w oderwaniu od ich specyfiki branżowej. Zaprezentowany model opiera się na mechanizmach przyczynowo-skutkowych i pozwala na stawianie kwantyfikowalnych celów, dając w rezultacie...
-
Planning optimised multi-tasking operations under the capability for parallel machining
PublicationThe advent of advanced multi-tasking machines (MTMs) in the metalworking industry has provided the opportunity for more efficient parallel machining as compared to traditional sequential processing. It entailed the need for developing appropriate reasoning schemes for efficient process planning to take advantage of machining capabilities inherent in these machines. This paper addresses an adequate methodical approach for a non-linear...
-
Biomechanical properties of 3D-printed bone models
PublicationBone lesions resulting from large traumas or cancer resections can be successfully treated by directly using synthetic materials or in combination with tissue engineering methods (hybrid). Synthetic or hybrid materials combined with bone tissue’s natural ability for regeneration and biological adaptation to the directions of loading, allow for full recovery of its biological functions. Increasing interest in new production methods...
-
Coffee silverskin as a potential bio-based antioxidant for polymer materials: Brief review
PublicationCoffee silverskin is one of the by-products generated by the coffee industry. Although it is not the most burdensome one, because it stands only for ~4.2 wt % of coffee, it seems like an auspicious raw material for industrial processes. Coffee silverskin is characterized by a relatively low moisture content of ~5–7%, so it often does not require quite energy-consuming drying processes. The chemical composition of coffee silverskin,...
-
Nietechnologiczne nie znaczy gorsze. Rzecz o innowacjach
PublicationInnowacje nietechnologiczne nie zajmują istotnego miejsca w dyskursie naukowym jak i praktycznym. Zauważona luka badawcza oraz brak praktycznych rozwiązań wspierających innowacje nietechnologicznie, były motywem podjęcia tego tematu przez międzynarodowy zespół, składający się z badaczy z czterech krajów (Danii, Finlandii, Litwy i Polski) oraz szeregu instytucji wspierających biznes, w tych krajach, pełniących funkcje pośredników...
-
Advanced ultra super critical power plants: role of buttering layer
PublicationDissimilar metal welded (DMW) joint plays a crucial role in constructing and maintaining ultra-supercritical (USC) nuclear power plants while presenting noteworthy environmental implications. This research examines different welding techniques utilized in DMWJ, specifically emphasizing materials such as P91. The study investigates the mechanical properties of these materials, the impact of alloying elements, the notable difficulties...
-
Fast tolerance-aware design optimization of miniaturized microstrip couplers using variable-fidelity EM simulations and re-sponse features
PublicationManufacturing tolerances and other types of uncertainties may considerably affect operation and performance of microwave components and systems. Quantification of these effects is therefore an important part of the design process. It is even more important to obtain designs whose sensitivity to parameter deviations is reduced as much as possible. All of these require statistical analysis carried out at the level of electromagnetic...
-
Cyclic behaviour modelling of additively manufactured Ti-6Al-4V lattice structures
PublicationThe present work is concerned with the numerical modelling of the cyclic behaviour of Ti-6Al-4V lattice structures. In the study, diamond structures of titanium alloy produced by the additive laser powder bed fusion (LPBF) method with different degrees of relative density were used. Realistic geometric models of the studied mesostructures were generated using computed microtomography, taking into account the imperfections of the...
-
Novel Complementary Multiple Concentric Split Ring Resonator for Reliable Characterization of Dielectric Substrates with High Sensitivity
PublicationAccurate characterization of dielectric substrates with high sensitivity remains an important challenge in a variety of industrial applications. This paper proposes an innovative strategy to address this challenge by developing and optimizing a unique Complementary Multiple Concentric Split Ring Resonator (CMC-SRR). The major goal is to propose a sensor design with increased sensitivity and reliability for dielectric characterization....
-
Strain energy density and entire fracture surface parameters relationship for LCF life prediction of additively manufactured 18Ni300 steel
PublicationIn this study, the connection between total strain energy density and fracture surface topography is investigated in additively manufactured maraging steel exposed to low-cycle fatigue loading. The specimens were fabricated using laser beam powder bed fusion (LB-PBF) and examined under fully-reversed strain-controlled setup at strain amplitudes scale from 0.3% to 1.0%. The post-mortem fracture surfaces were explored using a non-contact...
-
Italy, an Extraordinary Commonplace? Stereotypes and Imaginaries of Italianness in Online Communication by Fashion Brands
PublicationThe paper explores the use of country-related stereotypes associated with Italian identity in the social media communication of 21 Italian fashion brands on Instagram. Focusing on the concept of “made in Italy”, the research employs image content analysis to identify how the selected sample of brands communicates Italian identity globally. The theoretical framework emphasizes the importance of the Country of Origin (COO) concept,...
-
Technological aspects of manufacturing polymer packaging materials degradable in seawater environment
PublicationIn recent years, the number of polymer materials used in the food packaging market was growing extremely fast. This contributed to depletion of non-renewable resources and more intense degradation of the environment due to resistant polymer. Therefore, such a dramatic situation has forced researchers to look for biodegradable materials, decomposable under action of microorganism. Currently, only a small number of researches examine...
-
Nanocrystalline CVD Diamond Coatings on Fused Silica Optical Fibres: Optical Properties Study
Publicationpre-treatment by dip coating in two detonation nanodiamond (DND) seeding media has been studied. The DND suspension in ethyl alcohol and dispersion of DND in dimethyl sulfoxide (DMSO) with polyvinyl alcohol (PVA) were chosen for the seeding purpose. The grain size distribution of nanodiamond particles in both seeding media was kept at the same level (approximately 1050 nm). After the seeding nanocrystalline diamond lms were deposited...
-
Photovoltaic bulk heterojunctions with interpenetrating network based on semiconducting polymers
PublicationPhotovoltaic cells are supposed to be the most common generators of useful electricity in the nearest future as they utilize inexhaustible carriers of renewable energy called photons. Despite the fact that 95% of worldwide applied photovoltaic devices are based on inorganic semiconductors the area of organic photovoltaics grows successively due to possibility of considerable reduction of manufacturing costs. Since the Heeger's...
-
The investment process in the power supply industry
PublicationThe basis for power supply industry programming in a market economy should be the principle of sustainable development, which must take into account maintaining an adequate level of energy security on the one hand, and the aim to preserve the maximum degree of non-renewable resources on the other hand. Therefore, the overriding aim should be a strive to meet the current and prospective demand for energy and fuel, in conjugation...
-
Mind the Gender Wage Gap – the Impact of Trade and Competition on Sectoral Wage Difference
PublicationThis article examines differences between women’s and men’s wages in 18 selected OECD countries in the period 1970-2005. The study is based on 12 manufacturing sector- and skill-specific sets of panel data on the gender wage gap. We apply a system GMM estimator to the extended version of the conditional gender wage gap convergence equation, controlling for sector concentration and industry-specific measures of openness using a...
-
Poly(ε-Caprolactone)/Brewers’ Spent Grain Composites—The Impact of Filler Treatment on the Mechanical Performance
PublicationWaste lignocellulose materials, such as brewers’ spent grain, can be considered very promising sources of fillers for the manufacturing of natural fiber composites. Nevertheless, due to the chemical structure differences between polymer matrices and brewers’ spent grain, filler treatment should be included. The presented work aimed to investigate the impact of fillers’ reactive extrusion on the chemical structure and the poly(ε-caprolactone)/brewers’...
-
Insights into modification of lignocellulosic fillers with isophorone diisocyanate: structure, thermal stability and volatile organic compounds emission assessment
PublicationThis study presents an analysis of the structure and properties of different types of lignocellulosic fillers modified by isophorone diisocyanate (IPDI) to provide insights into the possibility of their application to the manufacturing of wood polymer composites (WPCs). Moreover, it deals with the environmental aspects of modified fillers, by assessment of volatile organic compounds (VOCs) emitted during modification, as well as...
-
Simple 60 GHz Switched Beam Antenna for 5G Millimeter-Wave Applications
PublicationA new 60 GHz band single-input switched beam antenna is proposed for the fifth-generation (5G) millimeter-wave network applications. The presented design is capable of electronically switching the main beam in two different directions via a proposed microstrip-line-to-slotline single-pole dual-throw (SPDT) switch based on commercially available p-i-n diodes. The antenna is fabricated in a low-cost printed circuit board process...
-
Novel method of estimation of inertial and dissipative parameters of a railway pantograph model
PublicationAn increase in electric railway vehicles service velocity requires that correct interaction between the pantograph and the catenary is ensured. This implies the need for developing mathematical models of pantographs and catenaries and determining their parameters. The article presents a method to determine parameters of mechanical joints of a railway pantograph based on analysis of pantograph subassemblies in swinging motion. The...
-
Proposition of the methodology for Data Acquisition, Analysis and Visualization in support of Industry 4.0
PublicationIndustry 4.0 offers a comprehensive, interlinked, and holistic approach to manufacturing. It connects physical with digital and allows for better collaboration and access across departments, partners, vendors, product, and people. Consequently, it involves complex designing of highly specialized state of the art technologies. Thus, companies face formidable challenges in the adoption of these new technologies....
-
Process layout planning and optimised product range selection in manufacture of wooden construction sets
PublicationThis paper introduces a systematic deterministic framework for planning and the analysis of facility layouts aimed at manufacturing a variety of parts, as components of specific end products. The essence of the proposed approach lies in the decomposition of a traditional job-shop into layout modules of generic material flow patterns, that inherently yields improved efficiency of the entire system. It entails the use of a relevant...
-
Rapid multi-criterial design of microwave components with robustness analysis by means of knowledge-based surrogates
PublicationManufacturing tolerances and uncertainties concerning material parameters, e.g., operating conditions or substrate permittivity are detrimental to characteristics of microwave components. The knowledge of relations between acceptable parameter deviations (not leading to violation of design specifications) and the nominal performance (not considering uncertainties), and is therefore indispensable. This paper proposes a multi-objective...
-
Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant
PublicationSeptoplasty is a widely used method in treating deviated septum. Although it is successfully implemented, there are problems with excessive bleeding, septal perforation, or infections. The use of anatomically shaped implants could help overcome these problems. This paper focuses on assessing the possibility of the usage of a nasal septum cartilage implant 3D printed from various market-available filaments. Five different types...
-
Methods for biomaterials printing: A short review and perspective
PublicationPrinting technologies have opened larger windows of innovation and creativity to biomaterials engineers by providing them with the ability to fabricate complex shapes in a reasonable time, cost, and weight. However, there has always been a trouble with function adjusting in printing technologies in view of the multiplicity of materials and apparatus parameters. 3D printing, also known as additive manufacturing, revolutionized biomaterials...
-
Smart Innovation Engineering Using Set of Experience and Decisional DNA
PublicationKnowledge-based Engineering Systems are founded upon integration of knowledge into computer systems and are one of the core requirements for the future Industry 4.0. Since the fourth industrial revolution is passing through the developing phase, implementation of Cyber-Physical Production Systems require more realistic approach. Knowledge Management and Knowledge Engineering plays an important role in manufacturing industries facing...
-
Variable-fidelity response feature surrogates for accelerated statistical analysis and yield estimation of compact microwave components
PublicationAccounting for manufacturing tolerances is an essential part of a reliable microwave design process. Yet, quantification of geometry and/or material parameter uncertainties is challenging at the level of full-wave electromagnetic (EM) simulation models. This is due to inherently high cost of EM analysis and massive simulations necessary to conduct the statistical analysis. Here, a low-cost and accurate yield estimation procedure...
-
University Students’ Research on Artificial Intelligence and Knowledge Management. A Review and Report of Multi-case Studies
PublicationLeading technologies are very attractive for students preparing their theses as the completion of their studies. Such an orientation of students connected with professional experiences seems to be a crucial motivator in the research in the management and business areas where these technologies condition the development of professional activities. The goal of the paper is the analysis of students’ thesis topics defended in the last...
-
Determinants of COVID-19 Impact on the Private Sector: A Multi-Country Analysis Based on Survey Data
PublicationOur paper aims to investigate the impact of COVID‐19 on private sector companies in terms of sales, production, finance and employment. We check whether the country and industry in which companies operate, government financial support and loan access matter to the behaviour and performances of companies during the pandemic. We use a microdata set from a worldwide survey of more than 15,729 companies conducted between April and...
-
Nonlocal elasticity analysis of moderately thick porous functionally graded plates in a hygro-thermal environment
PublicationThis work performs a novel quasi three-dimensional (3D) bending analysis for a moderately thick functionally graded material (FGM) made of nanoceramics and metal powders, in presence of porosities due to some incorrect manufacturing processes. Such porosities can appear within the plate in two forms, namely, even and uneven distributions. The modeled system assumes a polymer matrix where both shear and transverse factors coexist....
-
Investigating the combined effects of devulcanization level and carbon black grade on the SBR/GTR composites
PublicationCarbon black migration between ground tire rubber (GTR) and rubber matrix is essential in developing high-performance rubber/GTR composites. In this work, carbon black N220 (surface area: 107.1 m2/g, particle size: 20–25 nm) andN660 (surface area: 33.1 m2/g, particle size: 49–60 nm) were used as the reinforcement fillers for styrene-butadiene rubber(SBR) blended with reclaimed GTR. The combined effects of GTR devulcanization level...
-
Operational Performance and Weld Bead Characteristics of Experimental Tubular-Wires for Underwater Welding
PublicationAiming to evaluate new formulations and their operational behavior underwater, two experimental tubular wires with different chemical compositions in their internal flux were initially manufactured, employing a pilot machine and a unique manufacturing process. Weld beads were deposited on a plate placed in a flat position inside a tank using a mechanized system and the IMC 300 welding power source. The work was done at a depth...
-
Field Calibration of Low-Cost Particulate Matter Sensors Using Artificial Neural Networks and Affine Response Correction
PublicationDue to detrimental effects of atmospheric particulate matter (PM), its accurate monitoring is of paramount importance, especially in densely populated urban areas. However, precise measurement of PM levels requires expensive and sophisticated equipment. Although low-cost alternatives are gaining popularity, their reliability is questionable, attributed to sensitivity to environmental conditions, inherent instability, and manufacturing...
-
Lessons learned during SRAD hybrid motor development
PublicationStudent Researched and Developed (SRAD) hybrid rocket motor H-15 with total impulse of 15 $kNs$ was built. First version of the engine has average thrust of 3 $kN$, the second, improved one is prepared with an aim to have average thrust of 5 $kN$. Engine development was started from scratch and went through phases of: definition of design assumptions and constraints, numerical modelling to predict engine performance, CAD and CAM...
-
The FEM analysis of pressure installation elements after simulated accidental overheating
PublicationThe paper presents innovative analysis focused on the safety aspects of existing pressure installation operation after overheating accidents. Results presented here can be applied in decision-making process concerning further operation of existing pressure installation after cooling system failure. In this paper the results of FEM analysis performed for a straight pipe and 90 degrees elbow, made of super duplex stainless steel,...
-
Synthesis of Trehalose by the Erythritol-Producing Yeast Yarrowia lipolytica Co-Displaying Maltooligosyltrehalose Synthase and Maltooligosyltrehalose Trehalohydrolase
PublicationIndustrial trehalose production faces economic challenges with costly enzyme preparations, prompting the exploration of eco-friendly alternatives. Here, we established a coupled functional sugar production line leveraging erythritolproducing cells as an innovative enzyme preparation for trehalose synthesis. The erythritol-producing Yarrowia lipolytica was modified to express a fusion protein consisting of maltooligosyltrehalose synthase...
-
Business continuity management framework for Industry 4.0 companies regarding dependability and security of the ICT and ICS/SCADA system
PublicationThis chapter addresses a business continuity management (BCM) framework for the Industry 4.0 companies including the organizational and technical solutions, regarding the dependability and security of the information and telecommunication technology (ICT), and the industrial control system (ICS) / supervisory control and data acquisition (SCADA) system. These technologies and systems play nowadays important roles in modern advanced...