Filters
total: 1108
filtered: 980
Search results for: simulation model
-
Dynamics of Opposing Polymer Brushes: A Computer Simulation Study
Publication -
River flow simulation based on the HEC-RAS system
PublicationThis work considers the problem of river floods, and presents a computer solution that can be used to predict such a threat. The basic tool, called Hydrologic Engineering Centers for River Analysis System (HEC-RAS), and created by the US Army Corps of Engineering, is well developed; and the models created in the system HEC-RAS are quite realistic. For the purpose of solving practical national flood problems, simplified static and...
-
River Flow Simulation Based on the HEC-RAS System
PublicationThis work considers the problem of river floods, and presents a computer solution that can be used to predict such a threat. The basic tool, called Hydrologic Engineering Centers for River Analysis System (HEC-RAS), and created by the US Army Corps of Engineering, is well developed; and the models created in the system HEC-RAS are quite realistic. For the purpose of solving practical national flood problems, simplified static and...
-
INFOGEST static in vitro simulation of gastrointestinal food digestion
PublicationDeveloping a mechanistic understanding of the impact of food structure and composition on human health has increasingly involved simulating digestion in the upper gastrointestinal tract. These simulations have used a wide range of different conditions that often have very little physiological relevance, and this impedes the meaningful comparison of results. The standardized protocol presented here is based on an international consensus...
-
Evolutionary Sets of Safe Ship Trajectories: simulation results
PublicationThe Evolutionary Sets of Safe Ship Trajectories is a method solving multi-ship encounter situations. For given positions and motion parameters the method finds a near optimal set of safe trajectories of all ships involved in an encounter. The paper briefly presents foundations of the method and focuses on simulation results for selected test cases based on the Baltic Basin. The computer simulations cover both open waters and restricted...
-
Simulation of temperature field in cylindrical boiling heating section
PublicationW pracy przedstawiono wyniki obliczeń cylindrycznej sekcji grzejnej. Biorąc pod uwagę geometrię i konstrukcję sekcji grzejnej zaprezentowano rozwiązania pola temperatury dla cylindrycznej sekcji grzejenej. W uzyskaniu rozwiązania posłużono się metodą elementów skończonych.
-
Developing competences of IT project managers using simulation games
PublicationProject Management is a domain in which methodological approach is developing very rapidly. Project managers are required to present knowledge of the various methods of project management and apply them to the management of specific projects. It means that project managers must constantly develop their competence, mainly based on good practices from different formal methods of project management. The purpose of this article is...
-
Agents in Simulation of Cyberattacks to Evaluate Security of Critical Infrastructures
PublicationIn the last years critical infrastructures have become highly dependent on the information technologies and exposed to cyberattacks. Because the effects of the attacks can be detrimental, it is crucial to comprehensively asses the security of the infrastructures' information systems. This chapter describes MAlSim - the simulator of malicious software based on software agents, developed for the needs of a testbed for critical infrastructures...
-
Multi-agent large-scale parallel crowd simulation
PublicationThis paper presents design, implementation and performance results of a new modular, parallel, agent-based and large scale crowd simulation environment. A parallel application, implemented with C and MPI, was implemented and run in this parallel environment for simulation and visualization of an evacuation scenario at Gdansk University of Technology, Poland and further in the area of districts of Gdansk. The application uses a...
-
Computer simulation of detonation of shaped charge in sea water
PublicationArtykuł zawiera opis systemu przeciwnimowego Głuptak, koncentrując się na opisie działania ładunku kumulacyjnego do niszczenia min morskich. Opisano sposób formowania wiązki plazmy uderzającej w obudowę miny po zdetonowaniu opisywanego ładunku kształtowego. Zaprezentowano obraz symulacyjny i zdjęcia poklatkowe penetracji plazmy w obiekcie niszczonym.
-
Real-time simulation in non real-time environment
PublicationSimulation in real-time is a very useful tool because of didactical and practical benefits. Very important benefit of real-time simulation is a fact that operator’s decision can be taken into account in the same time scale as the real system would work. This enables construction of simulators, and opportunity to test control algorithms in Hardware in The Loop scheme using target industrial equipment. Professional real-time environments...
-
Experimental Verification of Storm Sewer Transient Flow Simulation
PublicationThe paper focuses mainly on laboratory investigations of transient and transcritical flow in a single pipe of a sewer system. The aim of this paper is to present a comparison between pressure values calculated by an improved McCormack scheme and those measured at the hydraulic laboratory of the Gdansk University of Technology, which were observed inside a pipe in an experiment for water flow with pressurization. The analysis proves...
-
Informational entropy in simulation of one-dimensional random fields
PublicationEntropia ciągłego rozkładu prawdopodobieństwa jest zdefiniowana jako funkcja liczby węzłów skalarnego pola losowego. W przykładzie numerycznym przedstawiono propagacje entropii w zagadnieniu reakcji sprężystego wspornika przy losowym obciążeniu.
-
Shell with random geometric imperfections simulation-based approach
PublicationPrzedstawiono analizę powłok z losowymi imperfekcjami. Zastosowano nieliniowe geometrycznie i materiałowo modele. Geometryczne imperfekcje opisano za pomocą pojedynczych zmiennych oraz pól losowych. Wykorzystano metodę Monte Carlo i metodę elementów skończonych. Zbadano wpływ różnych rozkładów prawdopodobieństwa imperfekcji geometrycznych na probabilistyczny rozkład nośności granicznej powłok. Zastosowane rozkłady ekstremalne imperfekcji...
-
Simulation of the profile wear of the tool in double wheel lapping
PublicationPrzedstawiono założenia modelowe do wyznaczenia zużycia profilowego narzędzia w docieraniu dwutarczowym. Rozkłady istotnych czynników kinematycznych (prędkości docierania i przyspieszenia stycznego) wpływających na zużycie docieraka zaprezentowane zostały dla różnych typów zakreślanych trajektorii.
-
Planning and simulation studies of cellular-type manufacturing processes
PublicationZaproponowano metodę i algorytmy projektowania struktur organizacyjnych systemów wytwarzania typu gniazdowego, z wykorzystaniem zdefiniowanych modeli zapisu wiedzy technologicznej i zasad grupowej obróbki przedmiotów. Wyznaczono wskaźniki efektywności procesu grupowego przebiegającego w systemach gniazdowych z rozmieszczeniem komórkowym oraz funkcjonalnym stanowisk wg przyjętych formuł analitycznych. Zawarto wyniki zrealizowanych...
-
Simulation and discretization of random field in the slip line method.
PublicationW pracy rozpatrywany jest problem nośności granicznej podłoża o własnościach stochastycznych przy obciążeniu spoczywającym na nim ciężkim sztywnym bloku.Opisano sposób generacji wielowymiarowego pola losowego oparty na diagonalizacji macierzy kowariancji przy wykorzystaniu macierzy dolnotrójkątnej .Szczególną uwagę zwrócono na wpływ dyskretyzacji ośrodka na rozwiązanie oraz jego zbieżność.
-
Hardware-in-the-loop simulation of the synchronization process of power generators
PublicationPrzedstawiono nowoczesne urządzenia do badań synchronizatorów automatycznych w warunkach laboratoryjnych. Szczególną uwagę poświęcono systemowi wizualizacji tych urządzeń )przy ich pomocymożliwa jest ciągła kontrola, sterowanie i wizualizacja procesem synchronizacji w systemie elektroenergetycznym.
-
Non-linear electrical properties of myocardium in computer simulation
PublicationPomiar impedancji elektrycznej jest obiecującą metodą monitorowania stanu mięśnia sercowego, szczególnie podczas niedokrwienia. Typową metodą pomiaru jest rejestrowanie odpowiedzi-napięcia na pobudzenie prądowe. Odpowiedź jest często aproksymowana jako liniowa względem pobudzenia. Artykuł jest poświęcony oszacowaniu rzędu wielkości nieliniowych komponentów w odpowiedzi.
-
A Model-Order Reduction Approach for Electromagnetic Problems With Nonaffine Frequency Dependence
PublicationThe aim of this paper is to present a novel model-order reduction (MOR) technique for the efcient frequency-domain nite-element method (FEM) simulation of microwave components. It is based on the standard reduced-basis method, but the subsequent expansion frequency points are selected following the so-called sparsied greedy strategy. This feature makes it especially useful to perform a fast-frequency sweep of problems that lead...
-
Monte-Carlo Modeling of Optical Sensors for Postoperative Free Flap Monitoring
PublicationThis work aims to develop a numerical tissue model and implement software to simulate photon propagation using the Monte Carlo method to determine design guidelines for a physical measurement system. C++ was used for the simulation program, and Python as a programming environment to create an interface that allows the user to customize individual simulation elements, allowing for increased accuracy and flexibility when simulating...
-
Monte-Carlo Modeling of Optical Sensors for Postoperative Free Flap Monitoring
PublicationThis work aims to develop a numerical tissue model and implement software to simulate photon propagation using the Monte Carlo method to determine design guidelines for a physical measurement system. C++ was used for the simulation program, and Python as a programming environment to create an interface that allows the user to customize individual simulation elements, allowing for increased accuracy and flexibility when simulating...
-
Wideband Modeling of DC-DC Buck Converter with GaN Transistors
PublicationThe general wideband modeling method of the power converter is presented on the example of DC-DC buck converter with GaN High Electron Mobility Transistors (HEMT). The models of all basic and parasitic components are briefly described. The two methods of Printed Circuit Board (PCB) layout parameter extraction are presented. The results of simulation in Saber@Sketch simulation software and measurements are compared. Next, the model...
-
DYNAMIC ANALYSIS OF THE RAILWAY BRIDGES IN POLAND WITH REGARDS TO HIGH-SPEED TRAINS PASSAGE ADJUSTMENT
PublicationThe dynamic analysis of the railway bridge in Tczew was carried out in the article as an example of such bridges adaptation suitability to handle high-speed trains. Calculations of railway bridges are greatly complicated and labor-consuming. The bridge model and a rolling stock passage simulation were developed in the SOFISTIK software. Three types of elements were used for the correct mapping of the structure in the calculation...
-
Accelerated Gradient-Based Optimization of Antenna Structures Using Multi-Fidelity Simulations and Convergence-Based Model Management Scheme
PublicationThe importance of numerical optimization has been steadily growing in the design of contemporary antenna structures. The primary reason is the increasing complexity of antenna topologies, [ a typically large number of adjustable parameters that have to be simultaneously tuned. Design closure is no longer possible using traditional methods, including theoretical models or supervised parameter sweeping. To ensure reliability, optimization...
-
Reduced-Cost Microwave Design Closure by Multi-Resolution EM Simulations and Knowledge-Based Model Management
PublicationParameter adjustment through numerical optimization has become a commonplace of contemporary microwave engineering. Although circuit theory methods are ubiquitous in the development of microwave components, the initial designs obtained with such tools have to be further tuned to improve the system performance. This is particularly pertinent to miniaturized structures, where the cross-coupling effects cannot be adequately accounted...
-
A Model of Thermal Energy Storage According to the Convention of Bond Graphs (BG) and State Equations (SE)
PublicationThe main advantage of the use of the Bond Graphs method and State Equations for modeling energy systems with a complex structure (marine power plants, hybrid vehicles, etc.) is the ability to model the system components of different physical nature using identical theoretical basis. The paper presents a method of modeling thermal energy storage, which is in line with basic BG theory. Critical comments have been put forward concerning...
-
Koncepcja i symulacja polowa generatora o zmiennej częstotliwości. Zastosowanie w autonomicznych systemach elektroenergetycznych = Conception and field simulations of a variable frequency generator. Application for autonomous power generation system
PublicationStreszczenie angielskie: This paper covers a conception and simulation results for a brushless synchronous generator working with variable speed in an autonomous energy generation system (e.g. airplane power grid, hybrid vehicle, micro-CHP). The papers has two parts: presentation of the generator conception used in modern autonomous energy generation systems, and simulation results using filed model elaborated in Flux2D software....
-
Analysis of IMS/NGN call processing performance using phase-type distributions
PublicationThis work is a continuation of our research on the traffic model dedicated for design and analysis of the Next Generation Network (NGN), which is standardized for distribution of current and future multimedia services based on the IP Multimedia Subsystem (IMS). Our analytical and simulation models allow evaluation of mean Call Set-up Delay E(CSD) as well as mean Call Disengagement Delay E(CDD) in a single domain of IMS/NGN. Ensuring...
-
Numerical modeling of sound intensity distributions around acoustic transducer
PublicationThe aim of this research study is to measure, simulate and compare sound intensity distribution generated by the acoustic transducers of the loudspeaker. The comparison of the gathered data allows for validating the numerical model of the acoustic radiation. An accurate model of a sound source is necessary in mathematical modeling of the sound field distribution near the scattering obstacles. An example of such obstacle is a human...
-
Burst loss probability for the combination of extended offset time based service differentiation scheme and PPS in optical burst switching network
PublicationIn the paper analytical model for calculating burst loss probabilities for the combination of two service differentiation schemes for OBS network namely: extended offset time based scheme and PPS (Preemption Priority Schemes) is revised. Moreover authors introduce analytical model for calculating burst loss probabilities for an optical path when OBS network employs both service differentiation schemes and JET signaling. The comparison...
-
Modelling of Longitudinal Elastic Wave Propagation in a Steel Rod Using the Discrete Element Method
PublicationThe paper deals with the issue of modelling elastic wave propagation using the discrete element method (DEM). The case of a longitudinal wave in a rod with a circular cross-section was considered. A novel, complex algorithm consisting of the preparation of models and simulation of elastic waves was developed. A series of DEM models were prepared for simulations, differing in discretisation and material parameters. Additional calculations...
-
Measurement Campaign and Mathematical Model Construction for the Ship Zodiak Magnetic Signature Reproduction
PublicationThe paper presents the partial work done within the framework of the EDA Siramis II project focused on magnetic signature reproduction of ships. Reproduction is understood here as the ability to determine the magnetic anomaly of the local Earth magnetic field in any direction and at any measurement depth due to the presence of the analysed object. The B-91 type hydrographic ship Zodiak was selected as the real case study. The work...
-
Robust Monitoring of Water Quality in Drinking Water Distribution System
PublicationThe paper develops a novel open loop set bounded observer for robust estimation of water quality in DWDS based on the advanced nonlinear quality dynamics model including disinfections by-products (DBPs). The observer utilises a cooperativeness of the quality dynamics model and is computationally efficient, hence applicable to on-line quality monitoring. The simulation results illustrate its good and sustainable performance.
-
Phase Transitions in Pores: Experimental and Simulation Studies of Melting and Freezing
Publication -
Probabilistic sensitivity of limit states of structures. The Monte Carlo simulation
PublicationPraca zawiera koncepcję badania wrażliwości stanów granicznych konstrukcji na zmiany poszczególnych zmiennych podstawowych, w oparciu o procedurę symulacyjną Monte Carlo. Sformułowanie ogólne metody oparte jest na analizie stanów granicznych konstrukcji, wprowadzona metoda losowa umożliwia badania histogramu stanu granicznego oraz estymację niezawodności / prawdopodobieństwa awarii konstrukcji.
-
Probabilistic sensitivity of limit states of structures : The Monte Carlo simulation
PublicationThe main issue of the paper is the probabilistic sensitivity of the limit states of structures with respect to selected input design variables. Attempt to the problem is done by the dedicated Monte Carlo simulation procedure. Basic design variables are random variables of given probability distributions, presented in the form of random numbers. Uni-parametrical increment of the dominant basic variable (basic variables) is done,...
-
Numerical Simulation of Operating Parameters of the Ground Source Heat Pump
Publication -
Respiratory system modelling and simulation based on the forced oscillation technique
Publication.
-
Simulation of surveilance of industrial robot's vibration with a use of the modal control
PublicationW pracy rozważano drgania niestacjonarnego układu nośnego robota IRb-6. Do nadzorowania drgań zastosowano algorytm sterowania modalnego przy energetycznym wskaźniku jakości. Celem proponowanego algorytmu jest minimalizacja poziomu drgań uchwytu manipulatora, a tym samym - zwiększenie możliwości nowoczesnych linii zrobotyzowanych, jak również poprawa dokładności i powtarzalności pozycjonowania robotów.
-
Simulation of ammonia combustion in dual-fuel compression-ignition engine
Publication -
Simulation of induction hardening of flat surfaces of moving massive elements
Publication -
Molecular-dynamics simulation of clustering processes in sea-ice floes
Publication -
The Simulation Laboratory Platform Based on Multisim for Electronic Engineering Education
Publication -
Finite element simulation of cross shaped window panel supports
PublicationThe aim of the work is to verify suitability of cross-shaped window panel supports for mullion-transom wall systems. The Finite Element Method (FEM) is chosen to determine the behaviour of stainless steel elements under loading. The advanced non-linear numerical simulations are carried out using an implicit FEM software package MSC.Marc. This study is proposed to initiate the comprehensive investigation of mechanical properties...
-
The Multiplatform Environment for Simulation and Features Estimation of Mixed-Signal Devices
PublicationThe use of simulation laboratories is gaining popularity in thedomains of engineering programs. However, the experience in teaching showsthat the simulation itself is not very effective in didactic processes. Teachingprocesses in thefield of specialist subjects, designed for students of technicaluniversities, should be based on direct operations performed by the student onreal devices. At the same time, at the later stages of didactic...
-
Hybrid quantum-classical approach for atomistic simulation of metallic systems
PublicationThe learn-on-the-fly (LOTF) method [G. Csanyi et al., Phys. Rev. Lett. 93, 175503 (2004)] serves to seamlessly embed quantum-mechanical computations within a molecular-dynamics framework by continual local retuning of the potential's parameters so that it reproduces the quantum-mechanical forces. In its current formulation, it is suitable for systems where the interaction is short-ranged, such as covalently bonded semiconductors....
-
Design and simulation of excitation laser system for in-situ Raman monitoring
PublicationPraca opisuje projekt oraz kontrukcję laserowego pobudzania próbek cienkowarstwowych. Zaprezentowana modelowanie optyczne systemu pobudzania oraz konfigurację prototypu. Układ znajdzie zastosowanie w długoogniskowym spektroskopie ramanowskim pracującym na stanowisku PA CVD.
-
Geo-engineering computer simulation seems attractive but is it the real world?
PublicationCorrect formulation of the differential equation system for equilibriom conditions of subsoil, especially in terms of controlled numerical calculation, is discussed. The problem of solution stability is also considered. The solution of problems, which are ill-posed, have no practical value in the majority of cases and is this way the engineering prognosis can lead to real disaster. The object of this paper is quite relevant if...
-
Experimentation, material modelling and simulation of bonded joints with a flexible adhesive
PublicationThe paper deals with material parameters identification of a flexible adhesive and the numerical simulation of its behaviour in a single lap bonded joint. The material modelling was based on the simple shear and tensile-shear laboratory tests of the bonded joints made of thin aluminium and polyurethane plates with the flexible adhesive Terostat MS 9360 manufactured by Henkel AG & Co. The adhesive was considered as a hyperelastic...