displaying 1000 best results Help
Search results for: MULTIPLE-INPUT MULTIPLE-OUTPUT (MIMO) ANTENNAS , DECOUPLING , INVERSE MODELING , ISOLATION , EXPEDITED REDESIGN
-
Modeling of a Quasi-Resonant DC Link Inverter Dedicated to Common-Mode Voltage and Ground Current Reduction
PublicationIn this paper, the modeling methodology of the AC drive system with a Parallel Quasi-Resonant DC Link Inverter (PQRDCLI) is described. A presented modeling approach is an attractive tool used for the effective evaluation of a common-mode (CM) voltage and grounds current reduction methods. Designed models of inverter, induction machine (IM), and cable are simple, thus the methods for parameter extraction are not complicated. Verification...
-
Numerical Modeling of Cone Penetration Test in Slightly Overconsolidated Clay with Arbitrary Lagrangian-Eulerian Formulation
PublicationIn this paper the results of the cone penetration test (CPT) modeling with the arbitrary Lagrangian-Eulerian (ALE) formulation provided by Abaqus software package have been presented. The study compares the cone resistance and sleeve friction obtained in numerical analysis with values measured in soundings performed in the uniform layer of clayey soil in the Koszalin area. The clay layer was found to be slightly overconsolidated...
-
A Goal-Oriented Error Estimator for Reduced Basis Method Modeling of Microwave Devices
PublicationThis letter proposes a novel a-posteriori error estimator suitable for the reduced order modeling of microwave circuits. Unlike the existing error estimators based on impedance function residuals, the new one exploits the residual error associated with the computation of the scattering matrix. The estimator can be effectively used in the Reduced Basis Method (RBM) to automatically generate reduced-order models. The results of numerical...
-
Bacterial SSB-like proteins of family Deinococcaceae - indentification, isolation, obtaining, purification and molecular characteristic
PublicationWiększość poznanych białek SSB jest aktywna w formie homotetramerycznej. Od 2002 roku znane są białka organizmów ekstremofilnych. Scharakteryzowano białka mikroorganizmów rodziny Deinococaceae. Uzyskane termostabilne białka stanowią atrakcyjną alternatywę w stosunku do znanych białek SSB w metodach diagnostyki molekularnej, technikach biologii molekularnej i analityce.
-
Isolation and molecular characterization of Fowl adenovirus strains in Black grouse: First reported case in Poland
Publication -
Critical evaluation of employment possibilities of OTT technique for isolation of the PAHs and PCBs from samples of water
PublicationW pracy przedstawiono krótki przegląd technik wykorzystywanych na etapie izolacji i/lub wzbogacania analitów z grupy WWA i PCB z próbek wody. W części doświadczalnej dokonano oceny możliwości wykorzystania krótkiego odcinka kapilarnej kolumny chromatograficznej jako pułapki sorpcyjnej na etapie izolacji i wzbogacania analitów z grupy WWA i PCB z próbek wody. Ponadto przedstawiono wpływ zjawiska sorpcji analitów na ściankach używanych...
-
Developments in ultrasound-assisted microextraction techniques for isolation and preconcentration of organic analytes from aqueous samples
PublicationThe great potential of ultrasonic assistance in sample preparation, especially extraction, is being recognized. In this review, we discuss the applications of ultrasonic radiation in assisting microextraction. Topics covered include ultrasound-assisted emulsification microextraction, ultrasound-assisted-emulsification-dispersive liquid-liquid microextraction, and ultrasound-assisted hollow-fiber liquid-phase microextraction with...
-
Open Data Capability Architecture - An Interpretive Structural Modeling Approach
PublicationDespite of increasing availability of open data as a vital organizational resource, large numbers of startups and organizations fail when it comes to utilizing open data effectively. This shortcoming is attributable to the poor understanding of what types of capabilities are required to successfully conduct data related activities. At the same time, research on open data capabilities and how they relate to one another remains sparse....
-
Broadband/Dual-band Metal-Mountable UHF RFID Tag Antennas: A Systematic Review. Taxonomy Analysis, Standards of Seamless RFID System Operation, Supporting IoT implementations, Recommendations and Future Directions
PublicationThe employment of broadband/dual-band ultra-high frequency (UHF) radio frequency identification (RFID) tag antennas contributes to the growth of RFID technology, with many potential implications, such as the increase of international trade, and reducing costs thereof. This study presents all reported articles on RFID tags for metal objects that can work seamlessly across different countries. Moreover, it addresses all available...
-
An interactive system for remote modeling and design validation of hybrid photovoltaic systems
PublicationAbstract: A multi-functional demonstrator of the interactive system is presented. The demostrator enables modeling, monitoring and design validation of hybrid photovoltaic systems assisted by fuel cells and thermoelectric generators, as well as experimentation and scientific research. A block diagram of the system is presented and the selection of its components is discussed. Availability of the system via Ethernet or GSM...
-
Karolina Zielińska-Dąbkowska dr inż. arch.
PeopleKarolina M. Zielinska-Dabkowska, Ph.D., Eng. Arch., M. Arch., is an Assistant Professor at the Faculty of Architecture of Gdańsk University of Technology (GUT). In 2002, she completed her studies of Architecture and Urban Planning at Gdańsk University of Technology (Gdańsk Tech) and in 2004, Architectural Engineering at the University of Applied Sciences and Arts (HAWK) in Hildesheim, Germany. After graduation, she worked for several...
-
Efficient Surrogate Modeling and Design Optimization of Compact Integrated On-Chip Inductors Based on Multi-Fidelity EM Simulation Models
PublicationHigh-performance and small-size on-chip inductors play a critical role in contemporary radio-frequency integrated circuits. This work presents a reliable surrogate modeling technique combining low-fidelity EM simulation models, response surface approximations based on kriging interpolation, and space mapping technology. The reported method is useful for the development of broadband and highly accurate data-driven models of integrated...
-
Data set generation at novel test-rig for validation of numerical models for modeling granular flows
PublicationSignificant effort has been exerted on developing fast and reliable numerical models for modeling particulate flow; this is challenging owing to the complexity of such flows. To achieve this, reliable and high-quality experimental data are required for model development and validation. This study presents the design of a novel test-rig that allows the visualization and measurement of particle flow patterns during the collision...
-
Elimination of clicks from archive speech signals using sparse autoregressive modeling
PublicationThis paper presents a new approach to elimination of impulsivedisturbances from archive speech signals. The proposedsparse autoregressive (SAR) signal representation is given ina factorized form - the model is a cascade of the so-called formantfilter and pitch filter. Such a technique has been widelyused in code-excited linear prediction (CELP) systems, as itguarantees model stability. After detection of noise pulses usinglinear...
-
Modeling the Effects of Slowly Biodegradable Substrate at Large WWTP in Northern Poland
PublicationThe essential study was divided into two parts: experimental investigation and mathematical modeling using special platform to computer simulations. In the first part of research an innovative measurement procedure for an indirect determination of the effect of biodegradable particulate and colloidal Xs substrate was developed and implemented. The results of laboratory tests were used futher to verify the mechanism of the hydrolysis...
-
Modeling of the denture’s elastic base
Publication -
Overview of Fading Channel Modeling
Publication -
Shipyard Crane Modeling Methods
Publication -
Usability of UML modeling tools
PublicationNarzędzia wspomagające modelowanie w UML pełnią istotną rolę w procesie wytwarzania i utrzymania oprogramowania. Badanie użyteczności tych narzędzi ma na celu poprawę produktywności oraz satysfakcji z ich użytkowania. W referacie zaprezentowano badania użyteczności za pomocą trzech metod: eksperymentalnego testowania efektywności, zapytań o aspekty użyteczności testowanych narzędzi oraz analitycznej metody GOMS (ang. Goals, Operators,...
-
Reliable Networks Design and Modeling
PublicationSłowo wstępne numeru specjalnego czasopisma Telecommunication Systems Journal
-
Design and modeling of reliable networks
Publication-
-
Modeling Volunteer Based Systems
PublicationThere are two main approaches to processing tasks requiring high amounts of computational power. One approach is using clusters of mostly identical hardware, placed in dedicated locations [1, 2, 3]. The other approach is outsourcing computing resources from large numbers of volunteers connected to the Internet [7]. This chapter presents an application of a mathematical model of the volunteer computing presented in Volume 1 of this...
-
Inverse method for axisymmetric and blade-to-blade viscous flow models in cylindrical coordinates using stream-function transformation
PublicationZaproponowano nową metodę odwrotną rozwiązywania dwuwymiarowych zagadnień projektowych we współrzędnych cylindrycznych. Użyto współrzędnych funkcji prądu uzależniając kształt opływanej geometrii od kształtu linii prądu. Metodę zwalidowano. Pokazano zastosowanie do przepływów osiowosymetrycznych jak i na powierzchniach cylindrycnych.
-
On Accuracy Modeling of Gas Turbine Cycles by the In-house COM-GAS Code
PublicationIn this paper, a comparison of accuracy modeling of gas turbine cycles between the basic (classical) model and the in-house COM-GAS code has been presented. The basic model uses a semi-perfect gas and well known projecting assumption. On the other hand, the computational flow mechanics (CFM) basis on a real gas by using thermodynamic tables. The thermodynamic analysis of thermal cycles, simply gas cycle GT8C and gas turbine cycle...
-
Low-Cost Multi-Objective Optimization of Antennas By Means Of Generalized Pareto Ranking Bisection Algorithm
PublicationThis paper introduces a generalized Pareto ranking bisection algorithm for low-cost multi-objective design optimization of antenna structures. The algorithm allows for identifying a set of Pareto optimal sets of parameters (that represent the best trade-offs between considered objectives) by iterative partitioning of the intervals connecting previously found designs and executing a Pareto-ranking-based poll search. The initial...
-
Modified monopole ring antennas as a solution for HiperLAN1/2 and IEEE 802.11b/g standard devices
PublicationZaprojektowano, wykonano i przebadano pierścieniową antenę planarną przeznaczona do aplikacji multisystemowych. Zastosowano system zasilania poprzez linie mikropaskową oraz dobrano wymiary i kształty pierścieni (promienników) w taki sposób, aby odpowiednio ''ulokować'' podzakresy pracy anteny. Zrealizowany prototyp anteny pracuje w zakresie standardów IEEE 802.11b/g oraz HiperLAN1/2.
-
Mutual Coupling Between IFF/SSR Microstrip Antennas with Reduced Transversal Size- Experimental Study
PublicationW artykule opisano wyniki symulacji oraz pomiarów sprzężeń wzajemnych anten systemu IFF. Wyniki poprzedza analiza konfiguracji i działania pojedynczej anteny zasilanej szczeliną typu H. Badania przeprowadzono dla szyku poziomego i pionowego, w zakresie wejściowego współczynnika odbicia oraz współczynnika sprzężenia na dwóch częstotliwościach pasma IFF.
-
Low-cost multi-objective optimization of antennas using Pareto front exploration and response features
PublicationIn the paper, a procedure for low-cost multi-objective optimization of antenna structures is presented. Our approach is based on exploration of the Pareto front representing the best possible trade-offs between conflicting objectives, here, the structure size and its electrical performance. Starting from the design representing the best in-band reflection level, subsequent Pareto-optimal designs are identified through local constrained...
-
Compact Electromagnetic Lens Antennas Using Cascaded Metasurfaces for Gain Enhancement and Beam Steering Applications
PublicationElectromagnetic (EM) lens antenna designs using cascaded metasurfaces for gain enhancement and beam steering applications are proposed. Two different lens aperture designs are proposed and populated with aperiodic unit cells of size 0.2λo × 0.2λo. In lens Design 1, the unit cells of different phases are distributed in concentric circular zones, whereas in lens Design 2, the unit cells of different phases are distributed in vertical...
-
Cost-Efficient Two-Level Modeling of Microwave Passives Using Feature-Based Surrogates and Domain Confinement
PublicationA variety of surrogate modelling techniques has been utilized in high-frequency design over the last two decades. Yet, the curse of dimensionality still poses a serious challenge in setting up re-liable design-ready surrogates of modern microwave components. The difficulty of the model-ing task is only aggravated by nonlinearity of circuit responses. Consequently, constructing a practically usable surrogate model, valid across...
-
Interatomic potential suitable for the modeling of penta-graphene: Molecular statics/molecular dynamics studies
PublicationWe test the potentials available for elemental carbon, with the scope to choose the potential suitable for the modeling of penta-graphene, the latest two dimensional carbon allotrope. By using molecular statics and molecular dynamics simulations we show that there is only one potential e namely the Tersoff-type potential proposed by Erhart and Albe in 2005 e which is able to correctly describe all the important features of penta-graphene....
-
3D Hand Shape Modeling for Automatic Assessing Motor Performance in Parkinson's Disease
PublicationIn this paper a method for hand pattern processing to create a 3D hand model is presented. By applying a complete hand armature to the model obtained, an interpolation of three motor tests for an individual Parkinson's disease patient can be performed. To obtain the 3D hand model the top view of the hand from a web cam is analyzed. The hand contour is examined to find characteristic points that allows for dividing hand image into...
-
Tolerance Optimization of Antenna Structures by Means of Response Feature Surrogates
PublicationFabrication tolerances and other types of uncertainties, e.g., the lack of precise knowledge of material parameters, have detrimental effects on electrical and field performance of antenna systems. In the case of input characteristics these are particularly noticeable for narrow- and multi-band antennas where deviations of geometry parameters from their nominal values lead to frequency shifts of the operating frequency bands. Improving...
-
Novel approach to modeling spectral-domain optical coherence tomography with Monte Carlo method
PublicationNumerical modeling Optical Coherence Tomography (OCT) systems is needed for optical setup optimization, development of new signal processing methods and assessment of impact of different physical phenomena inside the sample on OCT signal. The Monte Carlo method has been often used for modeling Optical Coherence Tomography, as it is a well established tool for simulating light propagation in scattering media. However, in this method...
-
Analysis of power output and bar velocity during various techniques of the bench press among women
Publication -
Software-based method of increasing the effective resolution of a measurement chain for a transducer with a pulse frequency output
Publication -
Contrast Tempo of Movement and Its Effect on Power Output and Bar Velocity During Resistance Exercise
Publication -
Building Information Modeling in Small and Middle Sized Buildings – Case Study
PublicationBuilding Information Modeling (BIM) is a technology designed to improve and integrate all engineering aspects in the construction design process. Tools that incorporate the idea of BIM are becoming more advanced and also more popular. Available software solutions have already reached an assumable high level of development, but still are not as widespread and used on nearly as many construction projects as could be expected. Therefore...
-
Implementation of FDTD-Compatible Green's Function on Graphics Processing Unit
PublicationIn this letter, implementation of the finite-difference time domain (FDTD)-compatible Green's function on a graphics processing unit (GPU) is presented. Recently, closed-form expression for this discrete Green's function (DGF) was derived, which facilitates its applications in the FDTD simulations of radiation and scattering problems. Unfortunately, implementation of the new DGF formula in software requires a multiple precision...
-
The Mediational Role of Relational Psychological Contract in Belief in a Zero-Sum Game and Work Input Attitude Dependency
Publication -
Influence of input data on airflow network accuracy in residential buildings with natural wind - and stack - driven ventilation.
PublicationW artykule omówiono wpływ danych wejściowych na dokładność modelu przepływu sieciowego powietrza w budynkach mieszkalnych z naturalną i kominową wentylacją. Zastosowano połączony model AFN-BES. Wyniki numeryczne omówiono dla 8 różnych przypadków z różnymi danymi ciśnienia wiatru. Wyniki pokazały, że ogromny wpływ danych wejściowych dotyczących ciśnienia wiatru na wyniki numeryczne.
-
Nonlinear Modeling in Time Domain Numerical Analysis of Stringed Instrument Dynamics
PublicationMusical instruments are very various in terms of sound quality with their timbre shaped by materials and geometry. Materials' impact is commonly treated as dominant one by musicians, while it is unclear whether it is true or not. The research proposed in the study focuses on determining influence of both these factors on sound quality based on their impact on harmonic composition. Numerical approach has been chosen to allowed independent...
-
Understanding the Ukrainian Migrants Challenges in the EU: A Topic Modeling Approach
PublicationConfronted with the aggression against Ukraine in 2022, Europe faces one of the most important humanitarian challenges - the migration of war refugees from Ukraine, most of them women with children and the elderly. Both international institutions such as the European Union and the United Nations, but also national governments and, above all, local governments, which are the main providers of services and resources for refugees,...
-
Improved Modeling of Microwave Structures Using Performance-Driven Fully-Connected Regression Surrogate
PublicationFast replacement models (or surrogates) have been widely applied in the recent years to accelerate simulation-driven design procedures in microwave engineering. The fundamental reason is a considerable—and often prohibitive—CPU cost of massive full-wave electromagnetic (EM) analyses related to solving common tasks such as parametric optimization or uncertainty quantification. The most popular class of surrogates are data-driven...
-
Dynamic Modeling of COVID-19 Disease with Impact of Lockdown in Pakistan and Malaysia
PublicationBeing researchers, it is an utmost responsibility to provide insight on social issues thus, this work addresses the dynamic modeling of first and most contagious disease named as COVID-19 caused by coronavirus. The first case of COVID-19 appeared in Pakistan was on 26th February 2020 and in Malaysia on 27th February 2020; both patients had foreign travel history. In the paper, the number of total affected cases and total deaths...
-
Chosen aspects of skeletal system modeling: Numerical solid and shell models of femur part
PublicationThe purpose of this paper is to present a new method of femur part modeling by using the finite element method. This method treats a femur part as a system composed of cortical and trabecular bone. For the purpose of determining a proper shape of femur part model there were created three models: a) the first one describes a femur part as a solid structure; b) the second one describes a femur part as a connection of cortical bone...
-
On the efficiency of bile salt for stable suspension and isolation of single-walled carbon nanotubes—spectroscopic and microscopic investigations
Publication -
Isolation and structure elucidation of phenolic compounds from Cyclopiasubternata Vogel (honeybush) intact plant and in vitro cultures
PublicationZ materiału roślinnego i hodowli tkankowych Cyclopia subternata Vogel (miodokrzew) wyizolowano i zidentyfikowano matodami NMR i MS 10 związków. m.in. z grupy flawonów i glikozydów izoflawonów. 6 z nich po raz pierwszy wykryto w tym gatunku roślin.
-
Modeling Methodologies for the Environment EE Msc sem. II r.a. 23/24
e-Learning CoursesZrozumienie procesów które mają wpływ na migrację i przemiany zanieczyszczeń w środowisku (ze szczególnym uwzględnieniem wód powierzchniowych). Zajęcia dotyczą podstaw i zasad budowy modeli jakości wody oraz służą pokazaniu jak te modele mogą być wykorzystywane do rozwiązywania problemów w inżynierii środowiska.
-
Design and evaluation of a base module of active power electronic transformer
PublicationThis paper presents an active power electronic transformer (APET) based on modular structure. The proposed three phase APET consists of at least three base modules (BM). The input/output stage of the BM is based on half-bridge sub modules. The isolation stage includes a medium frequency transformer and is realized as a dual half-bridge. The paper describes construction process and explains the control strategy. The theoretical...