Search results for: MULTI-DEGREE-OF-FREEDOM SYSTEM
-
Sensorless control of five-phase induction machine supplied by the VSI with output filter
PublicationIn this paper, a novel sensorless control structure based on multi-scalar variables is proposed. The tatic feedback control law is obtained by using the multi-scalar variables transformation, where the multi-scalar variables approach allows a full linearization of the nonlinear system. The control system could be described as “optimized” because of the minimized number of controllers. Furthermore, control system is divided into...
-
Multi-directional analysis of the maintenance of rainwater harvesting systems
Open Research DataPresented data are the result of research activity entitled „Multi-directional analysis of the maintenance of rainwater harvesting systems” conducted as a part of MINIATURA 7 competition. The research consisted of a comprehensive assessment of the quality of rainwater collected and stored in a rooftop harvesting system and then purified using inline...
-
Model of management of knowledge bases in the information technology evaluation environment
PublicationThe paper presents the model of management of knowledge bases in multi-agent system for evaluation of information technologies (IT_MAS). Such system is being developed in Gdansk Uni-versity of Technology by Information Technology Management Team. Multi-agent system is supposed to support manager level specialists during decision processes when there is identified need to buy or change any information technology. The main goal of...
-
Asynchronous WAM with Irregular Pulse Repetition
PublicationRadiolocation systems for aviation based on Multi-Lateration (MLAT) typically use a set of synchronised ground sensors to receive radio signals broadcast by onboard transmitters. In most cases, the sensor synchronisation in Wide Area Multi-Lateration Systems (WAM) is provided by Global Navigation Satellite System (GNSS) receivers. However, in the case of synchronisation failure, there is still a possibility to estimate the coordinates...
-
Tomasz Zubowicz dr inż.
PeopleTomasz Zubowicz has received his M.Sc. Eng. degree in Control Engineering from the Faculty of Electrical and Control Engineering at the Gda{\'n}sk University of Technology (GUT) in $2008$. He received his Ph.D. Eng. (Hons.) in the field of Control Engineering from the same faculty in $2019$. In $2012$ he became a permanent staff member at the Department of Intelligent Control and Decision Support Systems at GUT and a member of...
-
Roman Śmierzchalski prof. dr hab. inż.
PeopleRoman Śmierzchalski born in 1956 in Gdynia. He received the M.Sc. degree in 1979, the Ph.D. degree in 1989, both from the Gdańsk University of Technology, and the D.Sc. (‘habilitation’) degree in 1999 from the Warsaw University of Technology. From 1980 to 2009 he was an academic teacher and researcher with the Gdynia Maritime University, and since 2009 he has been with the Gdansk University of Technology, where he is currently...
-
Problems of modelling toxic compounds emitted by a marine internal combustion engine for the evaluation of its structure parameters
PublicationThe paper presents the possibility of using an analytical study of the engine exhaust ignition to evaluate the technical condition of the selected components. Software tools available for the analysis of experimental data commonly use multiple regression model that allows the study of the effects and iterations between model input quantities and one output variable. The use of multi-equation models gives a lot of freedom in the...
-
Problems of modelling toxic compounds emitted by a marine internal combustion engine in unsteady states
PublicationContemporary engine tests are performed based on the theory of experiment. The available versions of programmes used for analysing experimental data make frequent use of the multiple regression model, which enables examining effects and interactions between input model parameters and a single output variable. The use of multi-equation models provides more freedom in analysing the measured results, as those models enable simultaneous...
-
St. Adalberd church 3D point model
Open Research DataResearch data show the church of St. Adalbert in Gdansk, Poland. Two layers are presented in the .zip file: one represents the laser scanning result, the second represents the point cloud from 36 photogrammetry images from the UAV system. The aligned point clouds formed the basis to create the high-resolution 3D model. Reference data are laser scanning...
-
Multi agent grid systems
PublicationThis chapter presents an idea of merging grid and volunteer systemswith multi agent systems. It gives some basics concerning multi agentsystem and the most followed standard. Some deliberations concerningsuch an existing systems were made in order to finally present possibilities of introducing agents into the Comcute system.
-
Global Value Chains and Wages: Multi-Country Evidence from Linked Worker-Industry Data
PublicationThis paper uses a multi-country microeconomic setting to contribute to the literature on the nexus between production fragmentation and wages. Exploiting a rich dataset on over 110,000 workers from nine Eastern and Western European countries and the United States, we study the relationship between individual workers’ wages and industry ties into global value chains (GVCs). We find an inverse (but weak) relationship between the...
-
Adapting a General Tool to Monitoring Multi-Agent Systems Through Virtual Host Layer Extenstion
PublicationNagios is a free software for IT infrastructure monitoring. Out-of-the-box it is not suited for monitoring multi-agent systems, because agents may dynamically join and leave the system or change roles. But Nagios' flexible configuration makes extensions possible. This paper presents and verifies Nagios configuration and extensions for monitoring multi-agent systems.
-
Perspectives of Telematics Implementation in Tri-City Transport Systems Management and Planning
PublicationIn 2010 the City of Gdynia applied for match funding the project ''Implementation of the Integrated Traffic Management System TRISTAR in Tri-City" under the Operational Programme Infrastructure and Environment. This year the project has been placed on a list approved by the Ministry of Infrastructure. Tri-City proceeds with a tender for the implementation of the system. The project will be implemented in key elements are included...
-
XPS study of the TiO2-WO2 composites
Open Research DataValence state of W and Ti was measured in a TiO2-WO3 composites with a various composition.Powder samples of pure titanium dioxide, tungsten oxide and mix of 50% titanium oxide and 50% od tungsten oxide were measured. Oxides were annealed at the temperature in the range of 300 Celsius degree up to 900 deg. Measurements were performed by XPS UHV Omicron...
-
Data obtained by numerical simulation for X-ray focusing using a finite difference method
Open Research DataThe propagation of X-ray waves through an optical system consisting of many X-ray refractive lenses is considered. For solving the problem for an electromagnetic wave, a finite-difference method is applied.
-
Piotr Konieczka prof. dr hab. inż.
People -
Project Team Management Supported by an Agent-Based Model
PublicationThis work is a continuation of a series of works about research into the use of multi-agent systems to support IT project management. Previous studies have shown the possibility of using a multi-agent in order to optimize management decisions concerning the selection of methods for project implementation. It was noted that the project manager's decisions are influenced by three fundamental parameters: the entropy of the project,...
-
Ranking of Generation Source Locations by a Hybrid Multi-Criteria Method
PublicationThe paper presents a ranking of the locations of eight renewable energy sources (RES) made using a hybrid multi-criteria analysis method. The method is a combination of the analytical hierarchical process (AHP) method and numerical taxonomy. The considered generating sources, i.e. solar plants, biogas plants, and wind farms are sources that will significantly contribute to implementing the provisions of the energy and climate package...
-
Multipoint Ultrasonic Diagnostics System of Prestressed T-Beams
PublicationThis paper is devoted to the application of ultrasonic wave propagation phenomena for the diagnostics of prestressed, concrete, bridge T-beams. A multi-point damage detection system is studied with use of numerically obtained data. The system is designed to detect the presence of the material discontinuities as well as their location.
-
Software Agents for Computer Network Security
PublicationThe chapter presents applications of multi-agent technology for design and implementation of agent-based systems intended to cooperatively solve several critical tasks in the area of computer network security. These systems are Agent-based Generator of Computer Attacks (AGCA), Multi-agent Intrusion Detection and Protection System (MIDPS), Agent-based Environment for Simulation of DDoS Attacks and Defense (AESAD) and Mobile Agent...
-
COMPARATIVE ANALYSIS OF TRANSPORT ORGANIZATION AND FUNCTIONING OF WATER TRAMS IN GDAŃSK, BYDGOSZCZ AND KRAKÓW
PublicationThe subject of this work is to identify and juxtapose solutions implemented in transport provided by water trams for the following cities: Gdańsk, Bydgoszcz and Kraków. As a result of the conducted analysis of transport factors, the degree of conformity of project objectives to the actual role of the water tram has been determined. It was found that the Kraków Water Tram (also known as Cracow Water Tram) is characterized by the...
-
Machine Learning in Multi-Agent Systems using Associative Arrays
PublicationIn this paper, a new machine learning algorithm for multi-agent systems is introduced. The algorithm is based on associative arrays, thus it becomes less complex and more efficient substitute of artificial neural networks and Bayesian networks, which is confirmed by performance measurements. Implementation of machine learning algorithm in multi-agent system for aided design of selected control systems allowed to improve the performance...
-
The OptD-multi method in LiDAR processing
PublicationNew and constantly developing technology for acquiring spatial data, such as LiDAR (light detection and ranging), is a source for large volume of data. However, such amount of data is not always needed for developing the most popular LiDAR products: digital terrain model (DTM) or digital surface model. Therefore, in many cases, the number of contained points are reduced in the pre-processing stage. The degree of reduction is determined...
-
Possibilities of using SVC compensators for synchronous generators rotors oscillations damping.
PublicationThe article presents the idea of using static var compensators (SVC) for damping generators rotors oscillations. A novel SVC controller structure is proposed to provide better dynamic performance of the power system. A tests results are shown for proposed controller structure, that was carried out in a three-machine power system model as well as in multi-machine model of Polish Power System.
-
Sensorless Control of Induction Machine Supplied by Current Source Inverter
PublicationThe paper describes the voltage control technique of induction machines supplied by a current source inverter. The control system is based on proposed new multi-scalar variables, which are named “r.” The control system contains the output filter capacitor's model. In the sensorless control system the Z type backstepping speed observer was applied. The mathematical dependences are confirmed by simulation and experimental research.
-
Control design for slow speed positioning
PublicationThe problem under study is a synthesis of position and heading control system for low frequency model of surface vessel described by 3 DOF mathematical model. The recursive vectorial backstepping control design was used to keep fixed position and heading in presence of wave disturbances. The controller has been simulated on computer model of scaled supply vessel. It has been assumed that the actuators produce generalized forces...
-
Analysis of the design development of the sliding table saw spindles
PublicationProducers of sliding table saws constantly strive for improvement in sawing accuracy. One of the method is an upswing in a spindle behavior, since, it affects to a large degree sawing effects. The design development of sliding table saw spindles during the last quarter-century is presented. The spindle system of the modernized spindle of the sawing machine Fx550 is described.
-
Karolina Lademann mgr
PeopleCurriculum vitae
-
Security Information Sharing for the Polish Power System
PublicationThe Polish Power System is becoming increasingly more dependent on Information and Communication Technologies which results in its exposure to cyberattacks, including the evolved and highly sophisticated threats such as Advanced Persistent Threats or Distributed Denial of Service attacks. The most exposed components are SCADA systems in substations and Distributed Control Systems in power plants. When addressing this situation...
-
AeroSense Measurements: Wind Tunnel ETH Zurich
Open Research DataData from wind tunnel tests of Aerosesne measurement system installed on NACA 0012 at ETH Zurich wind tunnel.
-
The adaptive backstepping control of PMSM supplied by current source inverter for the field weakening region
PublicationThe sensorless control system of permanent magnet synchronous motor PMSM supplied by current source inverter for field weakening operation is presented in this paper. The adaptive backstepping control system and the backstepping speed observer are presented. The control system is based on multi-scalar variables. The control variables are: dc-link voltage and the output current vector pulsation. The control system was named voltage...
-
Consolidating logs in varying formats into a structured repository = konsolidacja logów w zmiennych formatach do strukturalnego repozytorium
PublicationDuring multi-agent systems development, testing and re- search, possibly voluminous logs are created at distributed agent loca-tions. These logs describe individual agents behavior and state changes. To get the complete picture of the multi-agent system working, it is necessary to consolidate these logs and to store them in a format appropriate for diverse analyzes. Specic issues arise during consolidation if the log formats are...
-
Application of muscle model to the musculoskeletal modeling
PublicationThe purpose of this paper is to investigate new fusiform muscle models. Each of these models treats a muscle as a system composedof parts characterized by different mechanical properties. These models explain the influence of differences in the stiffness of lateral parts and the degree of muscle model discretization. Each muscle model is described by a system of differential equations and a single integro-differential equation....
-
Validation of an Agent and Ontology-based Information Technology Assessment System
PublicationThe aim of this paper is to present a new method of the validation of an Agent and Ontology-based Information Technology Assessment System. In the introduction part of the paper, the characteristics of the proposed multi-agent system are presented. Next, some important details regarding the ontology functionality of this system are described and an approach to its verification process is proposed. The approach employs semantic...
-
GROUP COMPOSER - System for Modeling Agents’ Team Building for Tasks
PublicationMulti-agent systems consist of many autonomous units, called agents, that can interact when trying to achieve their goals. The selection of interaction partners is called team formation. Three basic approaches can be considered to match multi-agent system resources to the problem at hand. To research the properties of different approaches, a software for modeling team formation in multi-agent systems has been created and is presented...
-
Conception of interactive information and decision support system - model and evaluation
PublicationThis article presents conception of interactive information and decision support system for urban and industrial air quality management. The emphasis of the project is on real-time analysis and multi-media information, and support of distributed and mobile clients through the Internet.
-
Data obtained by computation for X-ray imaging of grating without magnification using oriented Gaussian beams
Open Research DataThe propagation of X-ray waves through an optical system consisting of grating and X-ray refractive lenses is considered. In this approach, the propagating wave is represented as a superposition of the oriented Gaussian beams. The direction of wave propagation in each Gaussian beam is consistent with the local propagation direction of the X-ray wavefront.
-
Data obtained by computation for X-ray imaging of grating with magnification factor equal 2 using oriented Gaussian beams
Open Research DataThe propagation of X-ray waves through an optical system consisting of grating and X-ray refractive lenses is considered. In this approach, the propagating wave is represented as a superposition of the oriented Gaussian beams. The direction of wave propagation in each Gaussian beam is consistent with the local propagation direction of the X-ray wavefront.
-
Data obtained by computation for X-ray imaging of grating with magnification factor equal 4 using oriented Gaussian beams
Open Research DataThe propagation of X-ray waves through an optical system consisting of grating and X-ray refractive lenses is considered. In this approach, the propagating wave is represented as a superposition of the oriented Gaussian beams. The direction of wave propagation in each Gaussian beam is consistent with the local propagation direction of the X-ray wavefront.
-
Data obtained by computation for X-ray imaging of grating with magnification factor equal 8 using oriented Gaussian beams
Open Research DataThe propagation of X-ray waves through an optical system consisting of grating and X-ray refractive lenses is considered. In this approach, the propagating wave is represented as a superposition of the oriented Gaussian beams. The direction of wave propagation in each Gaussian beam is consistent with the local propagation direction of the X-ray wavefront.
-
Modified Preisach model of hysteresis in multi air gap ferrite core medium frequency transformer
PublicationThis article presents the modified Preisach model of hysteresis for a 3-phase medium frequency transformer in a 100 kW dual active bridge converter. The transformer magnetic core is assembled out of ferrite I-cores, which results in multiple parasitic air gaps. For this transformer, the hysteresis loops were measured and parameters of the Preisach model were determined. The Preisach distribution function is approximated with a...
-
Improving Output Performance of the Ultrasonic Multicell Piezoelectric Motor by Development the Multi-Rotor Structure
PublicationIn recent years, many researches have been carried out on piezoelectric multi-rotor structures. This paper describes the analysis, development and experimental process of an ultrasonic multi-cell piezoelectric motor using a multi-rotor structure. In this design, three independent cells have been integrated into a mechatronic system. Analytical model and finite element method are used for modal and dynamic analysis of the proposed...
-
Multi-criterion decision making in distributed systems by quantum evolutionary algorithms
PublicationDecision making by the AQMEA (Adaptive Quantum-based Multi-criterion Evolutionary Algorithm) has been considered for distributed computer systems. AQMEA has been extended by a chromosome representation with the registry of the smallest units of quantum information. Evolutionary computing with Q-bit chromosomes has been proofed to characterize by the enhanced population diversity than other representations, since individuals represent...
-
Multi-Beam Antenna for Ka-Band CubeSat Connectivity Using 3-D Printed Lens and Antenna Array
PublicationIn this paper, the design of a passive multi-beam lens antenna is proposed for the CubeSat space communication system as an alternative application of a 2-D microstrip antenna array that has originally been designed for a 39 GHz 5 G MU-MIMO system. The half-ellipsoid lens is 3-D printed using stereolithography (SLA) technology. The antenna prototype is capable of selecting the main beam between 16 different directions with a gain...
-
Evolutionary Sets Of Safe Ship Trajectories: A New Approach To Collision Avoidance
PublicationThe paper introduces a new method of solving multi-ship encounter situations for both open waters and restricted water regions. The method, called evolutionary sets of safe trajectories combines some of the assumptions of game theory with evolutionary programming and aims to find optimal set of safe trajectories of all ships involved in an encounter situation. In a two-ship encounter situation it enables the operator of an on-board...
-
Application of multi-criteria methods to compare different solutions of supplying buildings in electricity from photovoltaic systems
PublicationNowadays, the technologies of electricity generation in distributed systems are usually associated with Renewable Energy Sources (RES). The choice of the construction site depends mainly on the availability of the power system. However, energy planning, especially in case of RES, is a complex process involving multiple and often conflicting objectives. The complexity of the selection of the electricity system is typically addressed...
-
Krzysztof Goczyła prof. dr hab. inż.
PeopleKrzysztof Goczyła, full professor of Gdańsk University of Technology, computer scientist, a specialist in software engineering, knowledge engineering and databases. He graduated from the Faculty of Electronics Technical University of Gdansk in 1976 with a degree in electronic engineering, specializing in automation. Since then he has been working at Gdańsk University of Technology. In 1982 he obtained a doctorate in computer science...
-
Universal autonomous control and management system for multipurpose unmanned surface vessel
PublicationThe paper presents design, structure and architecture of the Universal Autonomous Control and Management System (UACAMS) for multipurpose unmanned surface vessel. The system was designed, installed and implemented on the multipurpose platform - unmanned surface vessel named HydroDron. The platform is designed to execute hydrographic survey missions with multi-variant configuration of the survey system (payload? ) including multi-beam...
-
The impact of methods the stochastic analysis on swimming safety of multihull floating units (Part1)
PublicationThe presented article concerns the application of the methods of the stochastic analysis to solve differential equations for multihull catamaran-type floating unit. There was described the continuous process of Markov and the method of equations of Focker-Planck-Kolmogorov. The analysis of dynamics of the multihull unit was carried out with the assumption that the system model is the linear model with six degrees of freedom, on...
-
Application of the finite element methods in long-term simulation of the multi-physics systems with large transient response differences
PublicationApplication of the Finite Element Method (FEM) and the Multibody Dynamics Method allows analyzing of complex physical systems. Complexity of the system could be related both to the geometry and the physical description of phenomenon. The metod is the excellent tool for analyzing statics or dynamics of the mechanical systems, and permits tracking of Multi Body System (MBS) transient response for the long-term simulations and application...