Search results for: HIGH STABILITY
-
Thermal stability and degradation of selected poly(alkyl methacrylates) used in the polymer industry
Publication -
Rheological properties and stability of shear thickening fluids based on silica and polypropylene glycol
Publication -
Electrochemical stability of TiO2 nanotubes deposited with silver and gold nanoparticles in aqueous environment
Publication -
Stability of CII is a key element in the cold stress response of bacteriophage lambda infection
Publication -
In situ optical studies of thermal stability of iodine-doped polyazomethine thin films
Publication -
Conformational stability of the full-atom hexameric model of the ClpB chaperone fromEscherichia coli
Publication -
Nanomechanical Stability of Aβ Tetramers and Fibril-like Structures: Molecular Dynamics Simulations
Publication -
METHOD OF TRAINING THE ENDOSCOPIC VIDEO ANALYSIS ALGORITHMS TO MAXIMIZE BOTH ACCURACY AND STABILITY
PublicationIn the article a new training and testing method of endoscopic video analysis algorithms is presented. Classical methods take into account only eciency of recognizing objects on single video frames. Proposed method additionally considers stability of classiers output for real video input. The method is simple and can be trained on data sets created for other solutions. Therefore, it is easily applicable to existing endoscopic video...
-
Large thermo-elastic displacement and stability FEM analysis of multilayered plates and shells
PublicationThe paper concerns the load capacity analysis of thermally loaded multilayered plates and shells. The multilayered body is treated as an equivalent single layer whose kinematics is consistent with first order shear deformation theory. The authors focus on the thermo-elastic stability problem of the thin-walled structures. The equilibrium paths are traced with the use of Riks-Wempner-Ramm algorithm. By making use of the Tsai-Wu...
-
Selected problems of stability of thin-walled columns with bisymmetric open cross-section
PublicationPraca dotyczy problemów stateczności osiowo ściskanych prętów o bisymetrycznym przekroju otwartym. Badano wpływ nieliniowości materiału pręta oraz wstępnego zakrzywienia osi na wyboczenie skrętne oraz początkową ścieżkę pokrytyczną. Na przykładach numerycznych wykazano, że w pewnych przypadkach stateczny, symetryczny punkt może zmienić się na symetryczny ale niestateczny, co oznacza możliwość redukcji siły krytycznej.
-
Static headspace sampling and solid-phase microextraction for assessment of edible oils stability
PublicationStatyczna analiza fazy nadpowierzchniowej i mikroekstrakcja do fazy stacjonarnej z fazy nadpowierzchniowej zostały zastosowane do oznaczenia niskocząsteczkowych aldehydów - markerów procesu utleniania olejów roślinnych. Zoptymalizowano parametry izolacji i ekstrakcji analitów dla obu technik. Wyznaczono granice oznaczalności i wykrywalności oraz powtarzalność dla badanych związków. Obie metody zastosowano w analizie próbek olejów...
-
Stability of Ar/O2 Plasma-Treated Polypropylene Membranes Applied for Membrane Distillation
Publication -
Dynamic stability and spatial heterogeneity in the indyvidual-based modelling of a Lotka-Volterra gas.
PublicationPrzedstawiono wyniki symulacji systemu drapieżnik-ofiara. Dynamika populacji jest opisana oddziaływaniami typu Lotki Volterry ala uzyskane efekty przestrzenne różnia się od rozwiązań równań Lotki Voltery. Do analizy wyników symulacji uzyto miary entropii i korelacji. Entropia oscyluje w rytmie zgodnym z całą populacją, zaś średnie wartości korelacji skrosnej są zależne od rozmiarów okna obserwacji.
-
Stability of difference problems generated by hyperbolic first order partial differential systems.
PublicationPraca dotyczy numerycznej aproksymacji rozwiązań zagadnień początkowych dla nieliniowych układów równań różniczkowych cząstkowych pierwszego rzędu. Podano konstrukcję układu quasiliniowego równań różnicowych typu Eulera. Wykazano, że przy naturalnych założeniach jest on stabilny. Dowód zbieżności wykorzystuje metody porównawcze.
-
A review of stability problems of thin-walled structures developed at Gdańsk University of Technology
PublicationW pracy podano przegląd problemów stateczności konstrukcji cienkościennych, które były przedmiotem badań na Politechnice Gdańskiej. Przedstawiono bibliografię obejmującą 75 prace podzielone na trzy grupy tematyczne: stateczność prętów i łuków, pokrytyczne zachowanie się elemntów oraz optymalne projektowanie i analizę wrażliwości.
-
Some remarks about numerical stability in nonlinear dynamics on the basic of truss structures.
Publication.
-
Determination of stability constants of complexes of selected amide ionophores with alkali metal cations
PublicationPodano właściwości kompleksujące jony litowców czterech jonoforów typu amidów. Wyznaczono wartości stałych kompleksów z jonów Li+, Na+, K+ metodą potencjometryczną z zastosowaniem elektrod jonoselektywnych stosując dwie różne procedury: 1) stosując jako kation referencyjny TMA+, 2) stosując chromofor kompleksujący H+.
-
Influence of the steam within seals and glands of the turbine on its rotor motion stability.
PublicationPrzedstawiono metodę obliczania charakterystyk dynamicznych wpływu parowych uszczelnień turbin na ich dynamikę i stateczność ruchu wirników. Zarysowano model ''masowy'' uszczelnienia. Podano przykłady zastosowań.
-
Stability analysis of two-step Runge-Kutta methods for delay differential equations
PublicationW pracy badana jest własność stabilności dwukrokowej metody Rungego-Kutty względem liniowego równania testowego o zespolonych współczynnikach. Udowodniono, że jeśli pewne warunki są spełnione to każda A-stabilna dwukrokowa metoda Rungego-Kutty zastosowana do równania różniczkowego z opóźnieniem jest P-stabilna.
-
The Impact of Sloshing Liquids on Ship Stability for Various Dimensions of Partly Filled Tanks
PublicationLiquid sloshing phenomenon taking place in partly filled ships' tanks directly affects the stability of a vessel. However, only static calculations are carried out onboard ships nowadays and static transfer of liquid weight is taken into account in the course of routine stability calculation. The paper is focused on a dynamic heeling moment due to liquid sloshing in tanks onboard ships. A number of numerical simulations of liquid...
-
Implementation of Non-Probabilistic Methods for Stability Analysis of Nonlocal Beam with Structural Uncertainties
PublicationIn this study, a non-probabilistic approach based Navier’s Method (NM) and Galerkin Weighted Residual Method (GWRM) in term of double parametric form has been proposed to investigate the buckling behavior of Euler-Bernoulli nonlocal beam under the framework of the Eringen's nonlocal elasticity theory, considering the structural parameters as imprecise or uncertain. The uncertainties in Young’s modulus and diameter of the beam are...
-
Bi-based halide perovskites: Stability and opportunities in the photocatalytic approach for hydrogen evolution
PublicationIn this study, we successfully prepared Bi-based single perovskites of the A3Bi2I9 type (A = Cs, Rb, MA, FA), and, for the first time, attempted to experimentally obtain double perovskites Cs2B’BiI6 type (B′ = Ag, Au, In, Cu). Despite the premises available in theoretical studies, our research has proven the impossibility of the existence of double perovskites of this type. Nevertheless, both types of obtained materials were subjected...
-
Risk characterisation of the required index R in the new probabilistic rules for damage stability
PublicationWymagany wskaźnik podziału grodziowego R jest miarą bezpieczeństwa statku w wypadku kolizji. Zwykle wyznacza się go w oparciu o wskaźniki dla wybranych, istniejących statków. W pracy podano jak ustalić ten wskaźnik w oparciu o dane dotyczące kolizji (wypadkowości) statków.
-
Stability studies of selected phenoxyacid herbicides in water samples and detrmination of their transformation products
PublicationZbadano procesy przemian fenoksykwasów (takich jak: 2,4-D, MCPA, mekoprop, dichlorprop) w różnych roztworach wodnych. Sprawdzono wpływ parametrów (światło, temperatura oraz czas przechowywania próbki) na stabilność fenoksykwasów. Oznaczeń końcowych dokonano przy użyciu techniki chromatografii cieczowej sprzężonej ze spektrometrem mas.
-
Investigation of stability of aqueous solutions containing trace amounts of volatile organic analytes
PublicationOznaczając lotne związki chlorowcoorganiczne w matrycy wodnej należy uwzględnić specyficzne właściwości, którymi charakteryzują się te związki, a mianowicie:- niska temperatura wrzenia; - wysoka prężność pary nad roztworem; - stosunkowo niska rozpuszczalność w wodzie.Właściwości te należy uwzględnić w trakcie przygotowania wodnych roztworów wzorcowych wykorzystywanych na etapie kalibracji i badań modelowych. Ze względu na istotność...
-
Effect of lag screw on stability of first metatarsophalangeal joint arthrodesis with medial plate
PublicationBackground: First metatarsophalangeal joint (MTP-1) arthrodesis is a commonly performed procedure in the treatment of disorders of the great toe. Since the incidence of revision after MTP-1 joint arthrodesis is not insignificant, a medial approach with a medially positioned locking plate has been proposed as a new technique. The aim of the study was to investigate the effect of the application of a lag screw on the stability and...
-
Porous Phantoms Mimicking Tissues—Investigation of Optical Parameters Stability Over Time
PublicationOptical phantoms are used to validate optical measurement methods. The stability of their optical parameters over time allows them to be used and stored over long-term periods, while maintaining their optical parameters. The aim of the presented research was to investigate the stability of fabricated porous phantoms, which can be used as a lung phantom in optical system. Measurements were performed in multiple series with an interval...
-
Extended Newmark method to assess stability of slope under bidirectional seismic loading
PublicationThe paper concerns the dynamic behavior of a simple slope model subjected to simultaneous horizontal and vertical excitations. The proposed method is based on Newmark’s sliding block concept, however, four new features are introduced. The most important assumption is that the normal component of dynamic excitations affects the resisting force both before and after the initiation of the relative slope motion, making it time-dependent....
-
On FEM analysis of Cosserat-type stiffened shells. Static and stability linear analysis
PublicationThe present research investigates the theory and numerical analysis of shells stiffened with beams in the framework based on the geometrically exact theories of shells and beams. Shell’s and beam’s kinematics are described by the Cosserat surface and the Cosserat rod respectively, which are consistent including deformation and strain measures. A FEM approximation of the virtual work principle leads to the conforming shell and beam...
-
Porous Phantoms Mimicking Tissues – Investigation of Optical Parameter Stability Over Time
PublicationIn terms of optical parameters, optical phantoms can now replace live tissues and be used to validate optical measurement methods. Therefore, whether these parameters would be maintained after storage for 6 months was examined. The absorption and scattering coefficients were obtained from the measured transmittance and reflectance measurements taken 6 months apart and then compared. All of the measurements were conducted using...
-
Strong ellipticity conditions and infinitesimal stability within nonlinear strain gradient elasticity
PublicationWe discuss connections between the strong ellipticity condition and the infinitesimal instability within the nonlinear strain gradient elasticity. The strong ellipticity (SE) condition describes the property of equations of statics whereas the infinitesimal stability is introduced as the positive definiteness of the second variation of an energy functional. Here we establish few implications which simplify the further analysis...
-
Banking stability during the economic transformation process in selected countries of the Western Balkans
PublicationEconomic transformation is still an ongoing process in many European countries. Despite common economic roots, the current economic situations are developing differently in different countries. This article will consider the process of economic transformation in terms of the banking sector. It aims to assess the level of banking stability throughout the transformation process in the Western Balkan region, and to assess the determinates...
-
Selected local stability problems of channel section flanges made of aluminium alloys
PublicationThe paper addresses the issue of local buckling of compressed flanges of cold-formed thin-walled channel columns and beams with nonstandard flanges composed of aluminium alloys. The material behaviour follows the Ramberg–Osgood law. It should be noted that the proposed solution may be also applied for other materials, for example: stainless steel, carbon steel. The paper is motivated by an increasing interest in nonstandard cold-formed...
-
Simplified saturation modelling in three-leg power transformer for the system stability analisys
PublicationThe paper presents a simplified method for modelling non-linearity of the magnetic circuit of the power transformer. The saturation effect is implemented by describing the self and mutual inductances as a function of the magnetic flux. The most important element of this function is the saturation coefficient which is calculated based on transient state during the unloaded transformer switch on. The transformer model is described...
-
General Mechanism of Osmolytes’ Influence on Protein Stability Irrespective of the Type of Osmolyte Cosolvent
PublicationThe stability of proteins in an aqueous solution can be modified by the presence of osmolytes. The hydration sphere of stabilizing osmolytes is strikingly similar to the enhanced hydration sphere of a protein. This similarity leads to an increase in the protein stability. Moreover, the hydration sphere of destabilizing osmolytes is significantly different. These solutes generate in their surroundings so-called “structurally different...
-
Analysis of sloping brace stiffness influence on stability and load bearing capacity of a truss
PublicationThe paper is focused on the numerical study of stability and load bearing capacity of a truss with side elastic braces. The structure is made in reality. The rotational and sliding brace stiffnesses were taken into account. Linear buckling analysis and non-linear static analysis with geometric and material nonlinearity were performed for the beam and shell model of the truss with respect to the angle of sloping braces. As a result...
-
Stability and load bearing capacity of a braced truss under upward wind loading
PublicationThe paper is focused on the numerical and experimental investigation of stability of a steel truss under upward wind loading. The structure was stiffened by elastic braces situated at the top and bottom chord. Usually the lateral (translational) brace stiffness is considered. However, the rotational stiffness of braces caused by interaction between torsional stiffness of the truss top chord and bending stiffness of the roof elements...
-
Stability and load bearing capacity of a braced truss under upward wind loading
PublicationThe paper is focused on the numerical and experimental investigation of stability of a steel truss under upward wind loading. The structure was stiffened by elastic braces situated at the top and bottom chord. Usually the lateral (translational) brace stiffness is considered. However, the rotational stiffness of braces caused by interaction between torsional stiffness of the truss top chord and bending stiffness of the roof elements...
-
Performance and Stability in H2S of SrFe0.75Mo0.25O3-δ as Electrode in Proton Ceramic Fuel Cells
PublicationThe H2S-tolerance of SrFe0.75Mo0.25O3-δ (SFM) electrodes has been investigated in symmetric proton ceramic fuel cells (PCFC) with BaZr0.8Ce0.1Y0.1O3-δ (BZCY81) electrolyte. The ionic conductivity of the electrolyte under wet reducing conditions was found to be insignificantly affected in the presence of up to 5000 ppm H2S. The fuel cell exhibited an OCV of about 0.9 V at 700 °C, which dropped to about 0.6 V and 0.4 V upon exposure...
-
Failure of cold-formed beam: How does residual stress affect stability?
PublicationIn machine industry, stresses are often calculated using simple linear FEM analysis. Occasional failures of elements designed in such a way require recomputation by means of more sophisticated methods, eg. including plasticity and non-linear effects. It usually leads to investigation of failure causes and improvement of an element in order to prevent its unwanted behavior in the future. The study presents the case where both linear...
-
Simplified stability analysis of steel cylindrical silos with corrugated walls and vertical columns
PublicationIn the paper a simplified stability analysis of steel cylindrical silos composed of corru¬gated walls and vertical open-sectional columns was proposed. The whole 3D silo was modeled as a single column resting on elastic foundation provided by the silo walls. In proposed formula for the calculation of the foundation stiffness the curvature of the silo walls was taken into account. Three different analyses were carried out using...
-
Study of the electrochemical stability of polypyrrole coating on iron in sodium salicylate aqueous solution
PublicationIn this work electrochemical stability of optimized PPy film on iron in aqueous solution of sodium salicylate is studied. The main drawback of conducting polymers is their possibility to undergo an irreversible degradation (overoxidation). The overoxidized polymers lose their properties, for example, conductivity and redox activity, what excludes them from some practical applications. This study demonstrates that lowering the concentration...
-
Stability of a proportional observer with additional integrators on the example of the flux observer of induction motor
PublicationArtykuł opisuje zagadnienia związane ze stabilnością proporcjonalnego obserwatora Luenbergera z dodatkowymi integratorami
-
VIBRATION SURVEILLANCE DURING MILLING OF FLEXIBLE DETAILS WITH A USE OF THE ACTIVE OPTIMAL CONTROL
PublicationThe main goal of modern machining operations is to achieve increasingly better performance. High Speed Machining and/or High Performance Cutting, despite a lot of advantages, have also some drawbacks, for example, a possibility of losing stability and development of self-excited chatter vibration. This paper presents an approach of vibration surveillance during high speed milling with a use of active optimal control. Non-stationary...
-
Thermal Instability of Choline Chloride-Based Deep Eutectic Solvents and Its Influence on Their Toxicity─Important Limitations of DESs as Sustainable Materials
PublicationDeep eutectic solvents (DESs) have become a hot topic in many branches of science due to their remarkable properties. They have been studied in a wide variety of applications. In particular, choline chloride (ChCl)-based DESs are one of the most commonly used representatives of these fluids. Nevertheless, in order to apply DESs in some fields, it is essential to guarantee their stability, reusability, and biocompatibility. In this...
-
Thermoplastic starch nanocomposites using cellulose-rich Chrysopogon zizanioides nanofibers
PublicationGreen thermoplastic starch (TPS) nanocomposite films aided by cellulose nanofibers (CNFs) from Chrysopogon zizanioides roots were developed and characterized. When compared to other lignocellulosic fibers, Chrysopogon zizanioides roots revealed exceptionally high cellulose content (~48%). CNFs were separated using an environmentally friendly acid isolation technique that included three stages: (i) alkali treatment; (ii) bleaching;...
-
Ground lemon and stevia leaves as renewable functional fillers with antioxidant activity for high-density polyethylene composites
PublicationThe development of new sustainable material solutions in the processing of thermoplastic polymers concerns both the application of biopolymers and the use of valorized plant derivatives as fillers and modifiers of petrochemical polymers. Herein, the possibility of using unprocessed raw parts of two commonly used in the food industry leaves, i.e., lemon (LL) and stevia (ST), as active and functional fillers for high-density polyethylene...
-
Respiration rate estimation using non-linear observers in application to wastewater treatment plant
PublicationA problem of respiration rate estimation using two new non-linear observers for a wastewater treatment plant is addressed in this paper. In particular, a non-linear adaptive Luenberger-like observer and a super twisting sliding mode observer have been derived to produce stable and bounded estimates of the respiration rate. During the synthesis of the particular observer, an appropriate mathematical utility model was used. The observability...
-
Stability and bearing capacity of arch-shaped corrugated shell elements: experimental and numerical study
Publication -
The effect of hard/soft segment composition on radiation stability of poly(ester-urethane)s
Publication