Search results for: MONUMENTS, RENOVATION AND REPAIR WORKS, MODERNIZATION, CONSTRUCTION WORKS
-
Duhem and Natanson: Two Mathematical Approaches to Thermodynamics
PublicationIn this article, the previously unrecognized contributions of Pierre Duhem and Ladislavus Natanson in thermodynamics are shown. The mathematical remodelling of a few of their principal ideas is taken into consideration, despite being neglected in the literature. To emphasize these ideas in an appropriate epistemological order, it would be crucial to first revalue and reconstruct some underrepresented parts of the proceedings process...
-
Segmented bio-based polyurethane composites containing powdered cellulose obtained from novel bio-based diisocyanate mixtures
PublicationA considerable number of research works focus on the positive influence of cellulose on the properties of polymer-based composites and their wide range of application possibilities. The present work is focused on the synthesis of novel bio-based polyurethane (bio-PU) composites filled with powdered cellulose (microcellulose, MC) in an amount of 5 wt.%. Bio-PU composites were synthesized via a non-solvent prepolymer method. First,...
-
Predicting cutting power for band sawing process of pine and beech wood dried with the use of four different methods
PublicationWood drying is an important stage in the woodworking process. After drying, wood is subject to a re-sawing process, for which a high quality surface, low material loss, and high efficiency are often required. In this paper, forecasted values were presented of cutting power for the re-sawing process of pine and beech wood that were dried with four different methods. Forecasting of cutting power for an industrial band saw machine...
-
New-fangled sources of cellulose extraction: comparative study of the effectiveness of Cissus latifolia and Ficus benghalensis cellulose as a filler
PublicationRecycled polymers and biopolymers are receiving a great deal of attention these days. If these two can be combined, it will lead to an environment-friendly green material with a great deal of applications. Here the present work is about incorporating bio-based fillers in a recycled polyurethane matrix. Two unusual and extremely novel sources of cellulose have been proposed. The celluloses obtained from Cissus latifolia and Ficus...
-
THE ARCHITECTURE OF DAYLIGHT IN THE DISCOURSE ABOUT THE AESTHETICS OF SUSTAINABILITY
PublicationThe need to create ecological and energy efficient architecture is evident today. In the contemporary discourse on architecture more and more attention is dedicated to the aesthetics that expresses the idea of sustainability. The article is a voice in this debate, concentrating on the architecture that features daylight. Solar light comes from the natural environment and brings some substantial benefits for the architectural space,...
-
ICT Diffusion Trajectories and Economic Development: Empirical Evidence for 46 Developing Countries
PublicationIn economic theory, technology is treated as a crucial factor contributing significantly to economic development. Seminal works of Schumpeter (Theory of economic development. Transaction Publishers, New Brunswick, 1934, J Econ Hist 7:149–159, 1947), Baumol (Am Econ Rev 76:1072–1084, 1986), Gerschenkron (Economic backwardness in economic perspective. Belknap Press, Cambridge, MA, 1962) or Abramovitz (J Econ Hist 46(2):385–406, 1986)...
-
Towards Understanding of Mechanics of Hernia Managed by Synthetic Mesh in Laparoscopic Operation: A Single Case Study
PublicationIn this paper a research towards understanding of mechanics of ventral hernia operated with the use of Physiomesh Open image in new window implant and SecureStrap Open image in new window staples is described. Experimental and numerical studies are conducted for that purpose. Experimental works cover uni-axial tension tests of the implant samples and of the implant-staples-tissue system. Also experiments on implant-staples-tissue...
-
Waste tire rubber as low-cost and environmentally-friendly modifier in thermoset polymers – a review
PublicationNowadays, waste tire rubber (WTR) management is a growing and serious problem. Therefore, research works focused on the development of cost-effective and environmentally-friendly methods of WTR recycling are fully justified. Incorporation of WTR into polymer matrices and composite materials attracts much attention, because this approach allows sustainable development of industrially applicable waste tires recycling technologies....
-
Low-coherence method of hematocrit measurement
PublicationDuring the last thirty years low-coherence measurement methods have gained popularity because of their unique advantages. Low-coherence interferometry, low-coherence reflectometry and low-coherence optical tomography offer resolution and dynamic range of measurement at the range of classical optical techniques. Moreover, they enable measurements of the absolute value of the optical path differences, which is still an unsolved problem...
-
Usefulness of chest perfusion computed tomography in the diagnosis of diabetic pulmonary microangiopathy
PublicationThis paper presents the usefulness of perfusion computed tomography (pCT) in the diagnosis of diabetic pulmonary microangiopathy. Our previous works have shown that perfusion parameters are useful in the diagnosis of diabetic pulmonary microangiopathy. We are looking for such measurements and perfusion parameters that provide the most accurate diagnosis. Two types of comparison were made based on the results of clinical trials:...
-
Damaged plasticity model - seismic analysis of structure of the Petronas Twin Towers (Kuala Lumpur) in Malaysia
PublicationThe article presents numerical simulations for the modelling of seismic impact on the structure of Petronas Twin Towers (Kuala Lumpur) in Malaysia with application of two methods. The Response Spectrum method, in which a spectrum of the structure's responses to an earthquake's impact is generated and the Acceletogram (BETA) method, in which we generate dynamic load in the form of a diagram of the connection between acceleration...
-
Unusual behavior of secondary amine group as a leaving group
PublicationIn our recent project we focused on reactivity of2,2-dimethyl-4,6-dioxane-1,3-dione carbamoilo- and thiocarbamoylo- derivatives as a ketenesource. Meldrum`s acid derivatives after thermal decomposition gives substituted keteneswith stoichiometric yield, that can be trapped with various spectrum of nucleophiles likealcohols, thiols, amine, imines etc. In case of5-[3-(dimethylamino)-sulfanyl-propyliden]-2,2-dimethyl-1,3-dioxane-4,6-dione...
-
Multiobjective Aerodynamic Optimization by Variable-Fidelity Models and Response Surface Surrogates
PublicationA computationally efficient procedure for multiobjective design optimization with variable-fidelity models and response surface surrogates is presented. The proposed approach uses the multiobjective evolutionary algorithm that works with a fast surrogate model, obtained with kriging interpolation of the low-fidelity model data enhanced by space-mapping correction exploiting a few high-fidelity training points. The initial Pareto...
-
CPTU/DMT control of heavy tamping compaction of sands
PublicationHeavy tamping compaction method in cohesionless alluvial soil was evaluated with CPTU and DMT tests. Some examples of interpretation of soundings in pre-treated and compacted sands are given. The compaction work was performed in two stages. Compaction control was performed after each stage of tamping. Additional tests were performed two weeks after the compaction works completion to study the set-up effect. While typical increase...
-
Musical Instrument Identification Using Deep Learning Approach
PublicationThe work aims to propose a novel approach for automatically identifying all instruments present in an audio excerpt using sets of individual convolutional neural networks (CNNs) per tested instrument. The paper starts with a review of tasks related to musical instrument identification. It focuses on tasks performed, input type, algorithms employed, and metrics used. The paper starts with the background presentation, i.e., metadata...
-
Cannabinoids: Challenges, opportunities and current techniques towards its extraction and purification for edibles
PublicationDue to the multiple health benefits associated with the consumption of cannabinoids, there is a current trend on continuing to explore their biological properties. Cannabidiol (CBD) is likely to be the most investigated endocannabinoid from the cannabis plant. Unfortunately, the purification of CBD from its natural source and psychotropic analogue (tetrahydrocannabinol, THC) is timely challenging for the research community based...
-
Negative CO2 Emission Gas Power Plant As Technology for Utilization of Sewage Sludge, Production of Electrical Energy, and CO2 Capture - Case of Chamber Under Transpiration Cooling
PublicationThis work focuses on the concept developed in the nCO2PP project, which aims to demonstrate a technology that allows to achieve negative CO2 emissions through Carbon Capture and Storage (CCS) applied to sewage sludge. A feedstock is first gasified, then the resulting syngas is burned in a semi-closed oxy-fuel gas turbine with pure oxygen and water, using the advantages of oxy-combustion, to ease the capture of CO2 in the resulting...
-
Problemy z powłokami antykorozyjnymi na elementach wyposażenia obiektów mostowych
PublicationOpisano problem wadliwości zabezpieczenia antykorozyjnego w zakresie malarskich powłok ochronno-dekoracyjnych wykonywanych na stalowych elementach barier zabezpieczonych uprzednio poprzez ocynkowanie metodą zanurzeniową na gorąco. Wykorzystując przykłady pochodzące z różnych obiektów przedstawiono powtarzający się problem delaminacji powłok malarskich, niezależny od rodzaju zastosowanych wyrobów lakierniczych oraz znacznego rozwoju...
-
Problemy z powłokami antykorozyjnymi na elementach wyposażenia obiektów mostowych
PublicationPrzedstawiono problem wadliwości zabezpieczenia antykorozyjnego w zakresie malarskich powłok ochronno - dekoracyjnych wykonywanych na stalowych elementach barier zabezpieczonych uprzednio poprzez ocynkowanie metodą zanurzeniową. Wykorzystując przykłady pochodzące z różnych obiektów przedstawiono powtarzający się problem delaminacji powłok malarskich, niezależny od rodzaju zastosowanych wyrobów lakierniczych oraz znacznego rozwoju...
-
Zdolności dynamiczne do budowania chmury wartości w modelach biznesów
PublicationObserwacja współczesnych metod tworzenia wartości daje podstawy do wyłonienia nowej logiki ich generowania. Analiza modeli wytwarzania wartości przez przedsiębiorstwa np. sieciowe wykazała, że formułują one chmury wartości. Struktury tych chmur są różnorodne, niejednolite, kłębiaste. Przeprowadzone prace pozwoliły na sformułowanie obrazów wartości generowanych przez twarde komponenty modeli biznesów. Osiągnięcie tych wyników pozwoliło...
-
NUMERYCZNY MODEL OBLICZENIOWY OBIEGU TURBINY KLASY 300 MW
PublicationNiniejszy artykuł stanowi opis modelu obiegu cieplnego turbiny o mocy 360MW, utworzonego w preprocesorze numerycznego programu obliczeniowego onazwie DIAGAR. Zadaniem opisywanego modelu jest odtwarzanie zjawisk fizycznych zachodzących w poszczególnych urządzeniach składowych obiegu, zarówno podczas poprawnej (sprawnej) pracy bloku energetycznego, jak i w przypadku pojawienia się niesprawności. Utworzony...
-
Application of Shape Memory Alloys in Retrofitting of Masonry and Heritage Structures Based on Their Vulnerability Revealed in the Bam 2003 Earthquake
PublicationFor decades, one of the most critical considerations of civil engineers has been the construction of structures that can sufficiently resist earthquakes. However, in many parts of the globe, ancient and contemporary buildings were constructed without regard for engineering; thus, there is a rising necessity to adapt existing structures to avoid accidents and preserve historical artefacts. There are various techniques for retrofitting...
-
Prace rozwojowe nad pierwszą polską ładowarką teleskopową
PublicationW artykule dokonano przeglądu prac wykonanych przez członków Zespołu Hydrauliki i Pneumatyki Wydziału Mechanicznego Politechniki Gdańskiej w ramach programu „Bon na innowacje” dla firmy „Hydro-Metal Adam Gordziejczyk”. Obiektem prac była ładowarka teleskopowa z napędem hydraulicznym o udźwigu 1,5 T. Pierwsza część prac polegała na obliczeniach MES i poprawie sztywności konstrukcji ramy i wysięgnika. Druga część prac polegała na...
-
Piotr Zawadzki mgr inż.
PeoplePiotr Zawadzki graduated from the Faculty of Energy and Environmental Engineering at the Silesian University of Technology in Gliwice in 2018. He currently works at the Department of Water Protection in Laboratory of Water and Sewage Technologies, Central Mining Institute in Poland. His research interests include the elimination of micropollutants from the human environment with use of visible-light-driven advanced oxidation processes...
-
Tomasz Edward Berezowski dr inż.
PeopleHe was born in 1986 in Warsaw. He graduated in 2009 with honors from the Interfaculty Study of Environmental Protection at SGGW in Warsaw, specialty Restoration and Management of Environment. He defended his doctorate with honors at Vrije UIniversiteit Brussels in 2015. In 2015-2017 he worked as an assistant and then assistant professor at the Faculty of Civil and Environmental Engineering at SGGW. In 2017, he was employed as an...
-
Memory and Imagination: Artwork as a Form of Testimony
PublicationAs the generation of witnesses is passing away and the testimonies of Shoah survivors are replaced by an inherited, culturally constructed memory - post-memory – art becomes a meaningful landmark in the landscape of memory. Although the narration of history - being the researchers’ discourse rather than an objective view - has been considered to a certain extent fictitious, the difference between real and fictional, between remembering...
-
An NO2 sensor based on WO3 thin films for automotive applications in the microwave frequency range
PublicationA microwave system dedicated to the detection of nitrogen dioxide in the harsh environment of the Norway highways is proposed. An optimized transmission line type of sensor coated with a tungsten trioxide thin film that changes its electrical properties under NO2 gas exposure is developed. The sensors' response (S) is given in °/GHz and it is calculated based on wideband measurements. The advantage of wideband measurements in comparison...
-
Borrowing Images of Empire. The contribution of research on the artistic influence of the Holy Roman Empire on Polish Romanesque architecture in the eleventh and twelfth centuries
PublicationAlthough knowledge concerning Romanesque architecture in Poland has developed over many years, most cathedrals and ducal or royal seats have not been comprehensively examined. Moreover, a substantial number of contemporary scholarly works have erased the thin line between material evidence and its interpretation. As a consequence, the architectural remains of Polish Romanesque edifices are often considered the basis for wider comparative...
-
Integration of Lean Manufacturing with ISO Management Systems in Enterprise
PublicationLean manufacturing [LM], quality management system and environmental management system are clear initiatives with a goal of improving effectiveness and efficiencies of organizations. Many organisations tackle lean philosophy, ISO standards individually but this kind of attempt do not focus on the synergy and the advantage from the potential collaboration. This paper aims to present the possibility of integration Lean Management...
-
Energy-Aware High-Performance Computing: Survey of State-of-the-Art Tools, Techniques, and Environments
PublicationThe paper presents state of the art of energy-aware high-performance computing (HPC), in particular identification and classification of approaches by system and device types, optimization metrics, and energy/power control methods. System types include single device, clusters, grids, and clouds while considered device types include CPUs, GPUs, multiprocessor, and hybrid systems. Optimization goals include various combinations of...
-
Verification of selected calculation methods regarding shear strength in beams without web reinforcement
PublicationThe purpose of the article was to compare selected calculation methods regarding shear strength in reinforced concrete beams without web reinforcement. Several calculation methods were tested. This included codes: PN-EN 1992-1-1:2008, ACI 318-14 and fib Model Code for Concrete Structures 2010. The analysis also consists of authorial methods published in technical literature. Calculations of shear strengths were made based on experimental...
-
The Origins of the Concept of Ideology
PublicationThe concept of "ideology" as, firstly, a term that points at non-epistemological conditioning of cognitive processes, and, secondly, as a term which aimed at disclosing the ancillary role of given ideas in regard to specific political interests of certain groups, has long history. Since Francis Bacon's theory of idols modern philosophy endavoured to create a comprehensive classification of systematic cognitive errors which divert...
-
The Impact of Hybrid Flame Retardant Compositions on the Performance of Foamed Flexible Polyurethane/Ground Tire Rubber Composites
PublicationCurrent sustainability-oriented trends affect polyurethane (PU) materials and stimulate the incorporation of recycled or waste-based materials as fillers. Ground tire rubber (GTR) poses as an auspicious candidate due to the excellent performance of car tires. Despite the benefits related to the mechanical performance, it contributes to the increasing flammability of the resulting composites. Herein, presented work assessed the...
-
Mechanical Properties of 3D Printed Parts and Their Injection Molded Alternatives Subjected to Environmental Aging
PublicationAdditive manufacturing is the technology used in medical, industrial, or lifestyle applications. The scientific literature include works reporting various manufacturing parameters’ influence on changes in additive manufacturing components’ mechanical behavior, especially with fused filament fabrication (FFF). The changes in mechanical strength and toughness of FFF compared to injection molding parts were studied. In the study,...
-
A method of determining and visualizing safe motion parameters of a ship navigating in restricted waters
PublicationThe paper presents a method of displaying ship collision avoidance information which is based on an unconventional Collision Threat Parameters Area (CTPA) technique. The solution presented here extends CTPA's functionality from past works by supporting navigation in restricted waters and handling ship domains analytically instead of numerically. It visualizes potential navigational threats as well as possible collision avoidance...
-
Próba oceny efektów projektowania układów geometrycznych toru z wykorzystaniem komercyjnych programów komputerowych
PublicationW pracy podjęto kwestię dokładności uzyskiwanej w projektowaniu układów geometrycznych toru z wykorzystaniem komercyjnych programów komputerowych typu CAD. Opisano w sposób ogólny funkcjonowanie wybranego programu. Do celów weryfikacji wykorzystano własną, analityczną metodę projektowania układów torowych. W analizie porównawczej rzędnych poziomych rozpatrzono trzy warianty układu geometrycznego zawierającego łuk koszowy z trzema...
-
THE COST ANALYSIS OF CORROSION PROTECTION SOLUTIONS FOR STEEL COMPONENTS IN TERMS OF THE OBJECT LIFE CYCLE COST
PublicationSteel materials, due to their numerous advantages - high availability, easiness of processing and possibility of almost any shaping are commonly applied in construction for carrying out basic carrier systems and auxiliary structures. However, the major disadvantage of this material is its high corrosion susceptibility, which depends strictly on the local conditions of the facility and the applied type of corrosion protection system....
-
Damage of a post-tensioned concrete bridge – Unwanted cracks of the girders
PublicationThe cracking of a post-tensioned T-beam superstructure, which was built using the incremental launching method, is analyzed in the paper. The problem is studied in detail, as specific damage was observed in the form of longitudinal cracks, especially in the mid-height zone of the girder at the interface of two assembly sections. The paper is a case study. A detailed inspection is done and non-destructive testing results of the...
-
Tacjana Niksa-Rynkiewicz dr inż.
PeopleTacjana Niksa-Rynkiewicz - doctor of science in the field of computer science (2011). The doctoral dissertation concerned issues related to the development of Artificial Intelligence methods, and more precisely the generalization of triangular norms in fuzzy neural systems. Currently, he is a researcher (assistant professor) at the Gdańsk University of Technology. He develops his skills and conducts research in the use of methods...
-
Marek Tobiszewski dr hab. inż.
PeopleBorn on April 7, 1984 in Gdańsk. In 2012, he defended his doctorate with honors, in 2017 he obtained his habilitation on the basis of the scientific achievement "Development of analytical procedures and solvents for the assessment of environmental nuisance". He has been working at the Department of Analytical Chemistry since 2012. His research interests includes analytical chemistry, especially the analytics of organic compounds...
-
Kacper Wereszko mgr inż.
PeopleKacper Wereszko received the M.Sc. in 2016 (field of study: computer science, specialization: Internet technologies and algorithms). Since 2017 he is a Ph.D. student in the field of computer science. He works as assistant in Department of Algorithms and System Modelling. His research interests focus on security properties of graphs, domination problems in graphs and their practical applications.
-
Monika Wilamowska-Zawłocka dr hab. inż.
PeopleDr Monika WILAMOWSKA-ZAWŁOCKA obtained her PhD in Chemistry in 2011 at Faculty of Chemistry, Gdańsk University of Technology. She then was a post-doctoral fellow at Technische Universität Darmstadt, Germany. Since 2013 she has worked at Gdańsk University of Technology, since 2019 as an Associate Professor. Her research interests include composite materials for energy storage devices, especially for lithium-ion and sodium-ion batteries,...
-
The Concept of Construction of Hybrid Constructed Wetland for Wastewater Treatment in Roztocze National Park
PublicationRoztocze National Park (RNP) is one of 23 national parks in Poland. It was created in 1974 both to protect the natural and cultural heritage as well as to share the park area for science, education and tourism. In caring for the environment, the park removed asbestos coverage, performs thermo-modernization using renewable energy sources by the installation of solar panels and photovoltaic cells on the roofs of buildings, and pellet...
-
Architektura a dekonstrukcja. Przypadek Petera Eisenmana i Bernarda Tschumiego
PublicationArchitecture and Deconstruction Case of Peter Eisenman and Bernard Tschumi Introduction Towards deconstruction in architecture Intensive relations between philosophical deconstruction and architecture, which were present in the late 1980s and early 1990s, belong to the past and therefore may be described from a greater than...
-
CREATING A RANKING OF DIAGNOSTIC PARAMETERS FOR THE DYNAMIC PROCESS OF A MARINE COMBUSTION ENGINE IN THE ASPECT OF MULTI-CRITERIA EVALUATIONS
PublicationThe change of some of the engine’s structural parameters affects the change of toxic compound emission in exhaust gases. It mainly applies to the damage sustained by the charge exchange system as well as the fuel system and the engine supercharging system. These changes are definitely higher during dynamic states and the related transient states. As such, it is possible to speak of a diverse sensitivity of the diagnostic parameters...
-
Factors affecting low-temperature cracking of asphalt pavements: analysis of field observations using the ordered logistic model
PublicationAccurate identification of factors that primarily affect the number of low-temperature cracks is crucial for selection of road materials and planning of pavement maintenance. Field investigations of lowtemperature cracks were performed in the years 2014 and 2020 on the same 68 road sections being in service in typical traffic conditions. The collected data were statistically analysed using the ordered logistic regression model....
-
A distributed system for conducting chess games in parallel
PublicationThis paper proposes a distributed and scalable cloud based system designed to play chess games in parallel. Games can be played between chess engines alone or between clusters created by combined chess engines. The system has a built-in mechanism that compares engines, based on Elo ranking which finally presents the strength of each tested approach. If an approach needs more computational power, the design of the system allows...
-
Market knowledge and new product performance: the mediating effects of new product performance
PublicationMarket knowledge is recognised as an important predictor of new product performance, which existing studies have proven. However, a missing link in this relationship is creativity, and specifically, as a natural process in product innovation. This study aims to examine a model that includes two mediating mechanisms between market knowledge scope and two new product outcomes, respectively: a new product’s competitive advantage and...
-
Borders of Digital Art in the Context of the Information Society
PublicationThe article shows the relationship between the development of information technologies, the characteristics of the information society and digital art. The broad possibilities of the digital world related to recording, storing and processing data (cyber text, big data, smart services) and the creation of virtual worlds are pointed out. The influence of the development of information technologies on the character of the works of...
-
Ship domain applied to determining distances for collision avoidance manoeuvres in give-way situations
PublicationShip domain is often used in marine navigation and marine traffic engineering as a safety condition. The basic idea behind those applications is that an encounter of two or more ships can be considered safe if neither of ship domains is intruded by other ships. Research utilising this approach has been documented in numerous works, including publications on optimising collision avoidance manoeuvres performed to fulfil domain-based...