Search
displaying 1000 best results Help
Search results for: THERMAL DEGRADATION KINETICS
-
Improving Thermal Insulation Properties for Prefabricated Wall Components Made of Lightweight Aggregate Concrete with Open Structure
PublicationPorous concrete is commonly used in civil engineering due to its good thermal insulation properties in comparison with normal concrete and high compression strength in comparison with other building materials. An extremely porous concrete, called ‘lightweight aggregate concrete with open structure’ (LAC), is used in some German plants to produce prefabricated wall components. They are used mainly in hall buildings, e.g. supermarkets....
-
The effect of nitrogen on the structure and thermal properties of beryllium-containing Na-(Li)-Si-O-N glasses
PublicationTwo oxynitride glass series with the composition of 35Na2O-5BeO-(60-x)SiO2-xSi3N4 and 9Li2O- 27Na2O-5BeO-(59-x)SiO2-xSi3N4, were prepared. The glasses' topography and structure were studied by Scanning Electron Microscopy and Raman spectroscopy. The composition was analyzed by Inductively Coupled Plasma Optical Emission Spectrometer, SEM-EDS and nitrogen and oxygen elemental analyzer. Na-(Li)-Be-silicate glasses were found to contain...
-
ATTEMPTS OF THERMAL IMAGING CAMERA USAGE IN ESTIMATIONS OF THE CONVECTIVE HEAT LOSS FROM A VERTICAL PLATE
PublicationIn this paper a new method for determining heat transfer coefficients using a gradient method has been developed. To verify accuracy of the proposed method vertical isothermal heating plate with natural convection mechanism has been examined. This configuration was deliberately chosen, because of the fact that such case is historically the earliest and most thoroughly studied and its rich scientific documentation - the most reliable....
-
Thermal properties of ceramic Bi2VO5.5 and strontium–borate glass-ceramics containing crystalites of Bi2VO5.5. measured with DSC
Open Research DataThermal properties of ceramic Bi2VO5.5 and strontium–borate glass-ceramics containing Bi2VO5.5 crystallites was measured by DSC.
-
Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces
PublicationThis paper presents the results of attempts at reducing the problem of solar overheating of asphalt road pavement surfaces, resulting in weakening and accelerated destruction of the aforementioned structures. To protect pavement surfaces against periodic overheating, standard asphalt mixture AC 16 W 35/50, used for binder course, has been modified by replacing one of the aggregate fractions from the mineral mixture with lightweight...
-
Mechanism of Solute and Thermal Characteristics in a Casson Hybrid Nanofluid Based with Ethylene Glycol Influenced by Soret and Dufour Effects
PublicationThis article models a system of partial differential equations (PDEs) for the thermal and solute characteristics under gradients (concentration and temperature) in the magnetohydrodynamic flow of Casson liquid in a Darcy porous medium. The modelled problems are highly non-linear with convective boundary conditions. These problems are solved numerically with a finite element approach under a tolerance of 10−8. A numerical algorithm...
-
Imaging of morphological and physicochemical changes occuring in the structure of austenitic steel due to the thermal sensitization
Open Research DataIn polycrystalline materials, grain boundaries are always where phenomena such as surface diffusion, sedimentation and corrosion occur. They have a significant impact on the macroscopic properties of the construction material [1]. In addition to inhomogeneities such as manganese sulphide inclusions formed during the metallurgical process, interfacial...
-
Wybrane zagadnienia modelowania Thermal-FSI określające przepływ płynu i wymianę ciepła na przykładzie benchmarkowego eksperymentu wymiennika ciepła z minikanałami
PublicationWybrane zagadnienia modelowania Thermal-FSI określające przepływ płynu i wymianę ciepła na przykładzie benchmarkowego eksperymentu wymiennika ciepła z minikanałami
-
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Journals -
Calibration of the thermal desorption-gas chromatography-mass spectrometry system using standards generated in the process of thermal decomposition of chemically modified silica gel
Publication -
Influence of Thermal Decomposition of Wood and Wood-Based Materials on the State of the Atmospheric Air. Emissions of Toxic Compounds and Greenhouse Gases
PublicationThis paper presents the energy characteristics of wood and wood-based materials in the form of commercially available pellets, furniture board (MDF) and OSB. Toxicometric indices were determined for gaseous destructs arising from thermal decomposition and combustion of the materials studied. The paper proves that combustion conditions are crucial in terms of toxic destructive emissions. It has been shown that the combustion of...
-
Thermal properties of VO2 and V2O3 nanostructures
Open Research DataThe DataSet contains the DSC and TG curves of VO2 and V2O3 nanostructures obtained by the sol-gel with different reaction conditions. The information about xerogel powder synthesis is described in the Journal of Nanomaterials. The xerogel powder was annealing under argon atmosphere at the selected temperature: 500C, 600C, and 1000C.
-
Thermal Buckling Analysis of Circular Bilayer Graphene sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics
PublicationIn this article, the thermal buckling behavior of orthotropic circular bilayer graphene sheets embedded in the Winkler–Pasternak elastic medium is scrutinized. Using the nonlocal elasticity theory, the bilayer graphene sheets are modeled as a nonlocal double–layered plate that contains small scale effects and van der Waals (vdW) interaction forces. The vdW interaction forces between the layers are simulated as a set of linear springs...
-
Curing characteristics, mechanical and thermal properties of reclaimed ground tire rubber cured with various vulcanizing systems
PublicationGround tire rubber was thermo-mechanical reclaimed at 120 °C using a co-rotating twin screw extruder. The effect of vulcanizing system type on curing characteristics, static mechanical properties (tensile strength, elongation-at-break, hardness and resilience), dynamic mechanical properties and thermal properties of reclaimed ground tire rubber was investigated. Reclaimed rubber was cured using different types of vulcanization...
-
CFD COUPLING OF VOF MODEL WITH ARRHENIUS EQUATION FOR ANALYSIS OF LASER-INDUCED THERMAL DEACTIVATION OF E. COLI
PublicationUnderstanding bacterial deactivation at the micro-scale, particularly with E. coli, is crucial for advancing microbiology and has promising applications in biomedical research. In this research contribution, we investigate the thermal inactivation of E. coli bacteria using gold nanoparticles irradiated by a green 1-W laser within a microfluidic chamber. The microfluidic device comprises a fluidic chamber filled with a thin film...
-
Bifunctional sulfur-silicon podands as new nucleophilic ionophores in acyl transfer reactions. Influence of monovalent cations on the reaction kinetics
Publication -
The reaction of substituted N-phenacyl-pyridinium bromides in the pyridine ring with DABCO and DBU in water and DMSO. Kinetics and DFT studies
Publication -
Adsorption Kinetics of Acid Dye Acid Red 88 onto Magnetic Multi‐Walled Carbon Nanotubes‐Fe3C Nanocomposite
Publication -
The kinetics of phenol decomposition under UV irradiation with and without H2O2 on TiO2, Fe–TiO2 and Fe–C–TiO2 photocatalysts
Publication -
In-situ FTIR study of reaction mechanism and chemical kinetics of a Xundian lignite during non-isothermal low temperature pyrolysis
Publication -
Enhanced electrochemical kinetics of highly-oriented (111)-textured boron-doped diamond electrodes induced by deuterium plasma chemistry
PublicationNovel highly-oriented (111)-textured boron-doped diamond electrodes (BDDD) featuring high electrochemical activity and electrode stability toward electrochemical analytics were fabricated by deuterium-rich microwave plasma CVD. The high flux deuterium plasma-induced preferential formation of (111)-faceted diamond as revealed by XRD. The highly-oriented diamond surface exhibited improved boron dopant incorporation and activation,...
-
Structural, thermal and physico-mechanical properties of polyurethane/brewers’ spent grain composite foams modified with ground tire rubber
PublicationIn this work, brewers’ spent grain (BSG) and ground tire rubber (GTR) waste fillers were applied as low-cost reinforcement phase in rigid polyurethane foam (PUR). PUR/BSG/GTR composites were prepared by a single step method, using polyglycerol as partial substitute of commercially available petrochemical polyols. Foaming parameters, chemical structure, dynamic mechanical properties, thermal stability, physico-mechanical properties...
-
Lead-free bismuth-based perovskites coupled with g–C3N4: A machine learning based novel approach for visible light induced degradation of pollutants
PublicationThe use of metal halide perovskites in photocatalytic processes has been attempted because of their unique optical properties. In this work, for the first time, Pb-free Bi-based perovskites of the Cs3Bi2X9 type (X = Cl, Br, I, Cl/Br, Cl/I, Br/I) were synthesized and subjected to comprehensive morphological, structural, and surface analyses, and photocatalytic properties in the phenol degradation reaction were examined. Furthermore,...
-
Application of vibrational spectroscopy, thermal analyses and X-Ray diffraction in the rapid evaluation of the stability in solid-state of ranitidine, famotidine and cimetidine
PublicationThis paper reports the study on applicability of Fourier transform infrared (FTIR), near-infrared (NIR) and Raman spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) for the estimation of the chemical stability and photostability of histamine H2-receptor antagonist substances. Ranitidine hydrochloride (RAN), famotidine (FAM) and cimetidine (CIM) were tested and differences in sensitivity were measured...
-
Effect of Variation of Hard Segment Content and Graphene-Based Nanofiller Concentration on Morphological, Thermal, and Mechanical Properties of Polyurethane Nanocomposites
PublicationThis study describes the development of a new class of high-performance polyurethane elastomer nanocomposites containing reduced graphene oxide (RGO) or graphene nanoplatelets (GNP). Two types of polyurethane elastomers with different contents of hard segments (HS) were used as a polymer matrix. The developed nanocomposites were characterized by thermal analysis (DSC, TG), dynamic mechanical testing (DMA), hardness testing, mechanical...
-
Thermal properties of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides measured with DSC method
Open Research DataThermal properties of strontium–borate glasses and glass-ceramics containing bismuth and vanadium oxides was measured by DSC.
-
A significance of multi slip condition for inclined MHD nano-fluid flow with non linear thermal radiations, Dufuor and Sorrot, and chemically reactive bio-convection effect
PublicationThe aim of this research is to discuss the significance of slip conditions for magnetized nanofluid flow with the impact of nonlinear thermal radiations, activation energy, inclined MHD, sorrot and dufour, and gyrotactic micro motile organisms over continuous stretching of a two-dimensional sheet. The governing equations emerge in the form of partial differential equations. Since the resultant governing differential equations...
-
Photocatalytic degradation of volatile and non volatile organics on titanium dioxyde particles in fluidized bed.
PublicationPrzeprowadzono degradację metyloetyloketonu w obecności dwutlenku tytanu jako fotokatalizatora. Badano wpływ początkowego stężenia substancji i stężenia fotokatalizatora na szybkość fotokatalitycznego rozkładu.
-
New procedure for the examination of the degradation of volatile organonitrogen compounds during the treatment of industrial effluents
PublicationWe present a new procedure for the determination of 32 volatile organonitrogen compounds in samples of industrial effluents with a complex matrix. The procedure, based on dispersive liquid–liquid microex-traction followed by gas chromatography with nitrogen-phosphorus and mass spectrometric detection, wasoptimized and validated. Optimization of the extraction included the type of extraction and disperser sol-vent, disperser solvent...
-
Degradation and damage of advanced polymer composites due to environmental effects and low velocity impact
PublicationPrzedstawiono zagadnienie wpływu srodowiska wody oraz niskoenergetycznego udaru na właściwości mechaniczne laminatów epoksydowych wzmocnionych włóknami węglowymi, szklanymi, aramidowymi i hybrydowymi. Na tle krótkiego przeglądu literatury na dany temat przedstawiono oryginalne wyniki badań eksperymentalnych autorki.
-
Niszczenie wodorowe stali o podwyższonej wytrzymałości = Hydrogen degradation of high-strength steels.
PublicationW artykule przedstawiono niszczenie wodorowe stali 18G2A i jej symulowanej strefy wpływu ciepła (SWC). Jako parametry niszczenia wodorowego wybrano względne wartości energii zniszczenia, czasu do pęknięcia, wydłużenia, przewężenia i wytrzymałości na rozciąganie. Parametry te wyznaczono w próbie odkształcania z małą prędkością na próbkach gładkich, okrągłych. Stwierdzono, że stal 18G2A w środowisku kwaśnym (0,1 N H2SO4) podczas...
-
Enhanced Degradation of Ethylene in ThermoPhotocatalytic Process Using TiO2/Nickel Foam: Reaction Mechanism
Publication -
Influence of H2S on degradation of 9Cr-1Mo steel in advanced stage of metal dusting process
PublicationPrzedstawiono wyniki badań stali 9Cr-1Mo w zaawansowanym stadium procesu pylenia metalu po 10 latach eksploatacji w piecu rafineryjnej instalacji platformingu CCR, przeprowadzonych w celu podjęcia decyzji o dozowaniu związków siarki do wsadu instalacji. Na podstawie długotrwałej ekspozycji próbek stali w 600C w mieszaninie wodoru i siarkowodoru wykazano, że siarka może być powodem procesów wpływających niekorzystnie na stan materiału...
-
Municipal soild waste settlement (MSWS) model with account for integrated creep and degradation processes.
PublicationModel oparto na superpozycji składowych osiadania zależnych od obciązenia i wpływu czasu, zgodnie z obserwowanym zachowaniem się odpadów komunalnych w warunkach polowych i laboratoryjnych. Składowe osiadania zależne od obciązenia, które przyrastają w miarę dokładania kolejnych warstw odpadów, oblicza się z uwzględnieniem modułu podatności zależnego od poziomu obciążenia. Składowe osiadania wynikające z upływu czasu obejmują osiadanie...
-
The importance of degradation in the fate of selected organic compounds in the environment. Part II. Photodegradation and biodegradation
PublicationDegradacja jest naturalnym, wszechobecnym procesem rozkładu substancji organicznych obecnych w środowisku. Produkty degradacji lub pośrednie produkty rozkładu związków organicznych często wykazują inną toksyczność w stosunku do mikroorganizmów, zwierząt i ludzi niż związki wyjściowe. Procesy fotodegradacji i biodegradacji zachodzą zwykle jednocześnie. Fotodegradacja uznawana jest za wstępny proces, po którym następuje rozkład...
-
The importance of degradation in the fate of selected organic compounds in the environment. Part. I. General considerations.
PublicationZwiązki organiczne, w zależności od elementu środowiska w jakim występują (gleba, osady denne, wody powierzzchniowe i gruntowe) mogą ulegać powolnym przemianom pod wpływem rozmaitych procesów fizycznych, chemicznych biologicznych czy też fotochemicznych. W pracy przedstawiono drogę degradacji wybranych trwałych zanieczyszczeń organicznych w różnych warunkach. Omówiono problem pojawiania się produktów pośrednich w czasie degradacji...
-
Pin Angle Thermal Effects on Friction Stir Welding of AA5058 Aluminum Alloy: CFD Simulation and Experimental Validation
PublicationThe friction stir welding (FSW) of tool pin geometry plays a critical role in the final properties of the produced joint. The tool pin geometry directly affects the generation of heat and the flow of internal materials during the FSW process. The effects of the FSW tool pin angle on heat generation and internal flow have not been quantitatively investigated in detail. In this manuscript, a validated Computational Fluid Dynamic...
-
The Influence of a Photovoltaic Micro-Installation on the Low-Frequency Parameters of Electricity at PCC and Its Impact on the Thermal Characteristics of Selected Devices
PublicationThis manuscript illustrates the measurement results of parameters describing the quality of energy at the PCC (point of common coupling) of a photovoltaic micro-installation that can significantly affect devices in the same power grid. The analyses reflecting heating of selected devices used in domestic installations, which were performed in an isolated laboratory environment, are also indicated. The conducted study aimed at checking...
-
Digital Imaging and Communication in Medicine Standard for Breast Thermal Imaging
PublicationOmówiono znaczenie normy DICOM w obrazowaniu medycznym. Zaproponowano metodę opisu danych w diagnostyce terminczej piersi dla potrzeb normy DICOM. Zaprojektowano i wykonano algorytmy automatycznej konwersji danych oraz tworzenia struktur danych w hierarchiczno-obiektowym modelu danych.
-
Thermal Barrier as a technique of indirect heating and cooling for residential buildings
PublicationW artykule zaprezentowano koncept pośredniego ogrzewania i chłodzenia budynków mieszkalnych promieniowaniem słonecznym zwany barierą termiczną. System składa się z polipropylenowych rurek umieszczonych w ścianach zewnętrznych, w których znajduje się płyn. Koncept jest zastosowany do stabilizacji i redukcji przepływu ciepła w kierunku prostopadłym do ścian. Wykonano obszerne obliczenia MES z zastosowaniem nowego systemu kontroli,...
-
Photochemical and thermal reaction of intermediates in the phenylnitrene rearangment inside a hemicarcerand
PublicationBroadband irradiation (λ > 320 nm) of hemicarceplex H1 between −74 °C and −84 °C, produces encapsulated didehydroazepine (2), triplet phenylnitrene (3PN), 2-azabicyclo[3.2.0]hepta-1,3,6-triene (6), and 4-azaspiro[2.4]hepta-1,4,6-triene (7). The highly strained anti-Bredt imine 6 is formed from 2 via a photochemical four-electron electrocyclization. Under the irradiation conditions, 6 rearranges further to azaspirene 7. In addition,...
-
Advances of thermal tomography in non-destructive testing and medical diagnostics
Publication -
Computer-aided analysis of thermal convection near electric devices
PublicationObciążalność długotrwała urządzeń elektrycznych zależy od intensywności oddawania ciepła przez te urządzenia do otoczenia. Dla zwiększenia obciążalności długotrwałej urządzeń stosuje się konwekcję wymuszoną np. z wykorzystaniem wentylatorów. Wszechstronne obserwacje i analiza procesów konwekcji naturalnej wskazują, że jej intensyfikację można uzyskać dzięki umieszczaniu w pobliżu urządzenia oddającego ciepło elementów tworzących...
-
Thermal imaging of skin burns. 9th European Congress of Thermology.
PublicationArtykuł przedstawia wyniki badań in-vivo diagnostyki oparzeń skóry z użyciem metod termograficznych. Wykazano iż na podstawie obrazu termograficznego możliwa jest klasyfikacja głębokości oparzenia.
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL-MICROJET TEST PROBE
PublicationThe paper presents the numerical investigation of a microjet- microchannel cooling module. In which microjets of water are impinging into the microchannels and forming a liquid film on the impingement surface. Applied technology takes benefits from two very attractive heat removal techniques. When lminar jets are impinging on the surface have a very high kinetic energy at the stagnation point, also in microchannels boundary layer...
-
THERMAL ANALYSIS AND DESIGN OF HYBRID MICROCHANNEL -MICROJET TEST PROBE
PublicationAccurate control of cooling parameters is required in ever wider range of technical applications. It is known that reducing the flow hydraulic diameter to an increase in the economy of cooling and improves its quality (Mikielewicz and Muszyński 2009). Present study describes research results related to the design and construction of the test stand for hybrid microjet- microchannel cooling modules study, which may be applied in...
-
The influence of different time duration of thermal processing on berries quality
PublicationOznaczano zawartość związków bioaktywnych (polifenole, flawonoidy, taniny, antocyjany i kwas askorbinowy) oraz poziom aktywności przeciwutleniającej próbek ekstraktów (wodnych, heksanowych i acetonowych) uzyskanych z różnych gatunków owoców jagodowych. Do pomiaru poziomu aktywności przeciwutleniającej wykorzystano takie testy jak ABTS, DPPH, FRAP i CUPRAC. Zbadano wpływ czasu trwania procesu obróbki termicznej na zawartość bioaktywnych...
-
Thermal and Strength Properties of Lightweight Concretes with Variable Porosity Structures
Publication -
Thermal and strength properties of lightweight concretes with the addition of aerogel particles
Publication -
Thermal decomposition of surface compounds for the generation of small quantities of acetaldehyde
Publication