displaying 1000 best results Help
Search results for: CRASH AND NUMERICAL TESTS
-
Experimental and numerical study on damage detection in an L-joint using guided wave propagation
Publication -
Numerical investigation of flooding of real-topography developed areas following river embankment failure
PublicationPrzedstawiono numeryczne symulacje hydrodynamiki przepływu powodziowego na terenie zabudowanym po przerwaniu wału przeciwpowodziowego. Zaprezentowano porównanie obliczeń z wynikami własnych pomiarów laboratoryjnych przeprowadzonych w Laboratorium Hydrauliki Inżynierii Środowiska Politechniki Gdańskiej.Zaproponowano wykorzystanie modelu przepływu do oceny zagrożenia powodziowego obszarów zabudowanych zlokalizowanych na terenach...
-
Numerical investigations of the engine cooling system in a small power vesel pod propulsion system
PublicationThe development of electronics and electrotechnology enabled to put electric motors of the alternating current in the pod and to use them for the main drive of ships. A lot of heat which must be picked up from the system is a problem which is turning up at applying the system of this type. Many big ships lately contended with these problems. Building the small propeller for the boat powered with solar power we decided to check...
-
NUMERICAL SIMULATION OF CRATER CREATING PROCESS IN DYNAMIC REPLACEMENT METHOD BY SMOOTH PARTICLE HYDRODYNAMICS
PublicationA theoretical base of SPH method, including the governing equations, discussion of importance of the smoothing function length, contact formulation, boundary treatment and finally utilization in hydrocode simulations are presented. An application of SPH to a real case of large penetrations (crater creating) into the soil caused by falling mass in Dynamic Replacement Method is discussed. An influence of particles spacing on method...
-
Chosen aspects of skeletal system modeling: Numerical solid and shell models of femur part
PublicationThe purpose of this paper is to present a new method of femur part modeling by using the finite element method. This method treats a femur part as a system composed of cortical and trabecular bone. For the purpose of determining a proper shape of femur part model there were created three models: a) the first one describes a femur part as a solid structure; b) the second one describes a femur part as a connection of cortical bone...
-
Critical review of propeller performance scaling methods based on model experiments and numerical calculations
PublicationThe article presents the results of experimental and theoretical investigation of propeller scale effects. The objective of this investigation is to test the adequacy of the methods currently used and to develop possible improvement of the methods.New approaches to the problem and new procedures to account for the propeller scale effects are suggested. The description of the underlying experimental and theoretical research is included.
-
Behaviour of deformed steel columns exposed to impact load during earthquakes: numerical analysis
PublicationIt has been observed during earthquakes that the so called soft-storey failure of an upper floor of a building leads to considerable vertical impact load acting on structural members of the lower storeys. The aim of this paper is to investigate numerically the behaviour of horizontally deformed columns (deformation as the result of earthquake loading) that are additionally subjected to vertical impact load. In the first stage of...
-
Numerical studies on size effects in concrete beams. Architecture Civil Engineering Environment ACEE
PublicationW artykule przedstawiony wyniki obliczeń efektów skali w belkach betonowych podczas zginania. Zastosowano model sprężysto-plastyczny z nielokalnym osłabieniem. Rozkład wytrzymałości na rozciąganie był stochastyczny - przestrzennie skorelowany. Belki były geometrycznie podobne. Wyniki porównano z modelem efektu skali Bazanta.
-
Numerical simulations of sand behavior using DEM with 2 different descriptions of grain roughness
PublicationW rozdziale przedstawiono wyniki dyskretnych symulacji jednorodnego trójosiowego ściskania piasku przy zastosowaniu metody elementów dyskretnych. Obliczenia wykonano stosując 2 różne opisy szorstkości ziaren: kule z uwzględnieniem momentów kontaktu oraz grona kul. Obliczono energię sprężystą i dysypację plastyczną. Wyniki symulacji numerycznych porównano z wynikami doświadczalnymi.
-
Numerical simulation of transient flow in storm sewers using standard and improved mccormack scheme
PublicationProblem przepływu wody w rurach kanalizacji deszczowej wiąże się z pewnymi specyficznymi zjawiskami zachodzącymi w przewodach podczas zjawisk burzowych. Jeśli rury zaczynają być całkowicie wypełnione wodą, można zaobserwować przejście z ruchu ze swobodną powierzchnią do ruchu pod ciśnieniem i odwrotnie. Takie zjawisko można zaobserwować również w kanałach kontrolowanych przez urządzenia sterujące, np. zasuwy. Ponadto ruch szybkozmienny...
-
Asymptotic numerical solver for the linear Klein–Gordon equation with space- and time-dependent mass
Publication -
Numerical investigation of conjugate heat transfer in the presence of two fluid separated by a rigid wall
Publication -
The 4th Generation of CeSFaMB in numerical simulations for CuO-based oxygen carrier in CLC system
Publication -
Numerical Analysis of Twist Extrusion Pressing of Al-Mg-Mn-Sc-Zr Scalmalloy
Publication -
Application of non-classical operational calculus to indicate hazards in numerical solutions of engineering problems
PublicationThe article addresses the application of non- classical operational calculus to approximative solutions of engineering problems. The engineering-sound examples show that a continuous–discrete problem transformation from differential unequivocal problem to a differential wildcard problem, triggering a change in solution quality. A number of approximative methods are capable to alter both quantitative and qualitative...
-
Experimental and numerical analysis of the pyrolysis dynamics of a single wood particle: presentation of the radiographic technique
PublicationPyrolysis is an oxygen-free process for the thermal decomposition of raw materials. The heat conduction and flow of pyrolysis products (i.e., the gas fraction and liquid vapour generated during pyrolysis) influence the process and products. In this work, the influence of the orientation of wooden particle fibres with respect to the direction of the heat source on the dynamics of the process was investigated, where there were two...
-
The Effect of the Selection of Three-Dimensional Random Numerical Soil Models on Strip Foundation Settlements
PublicationThis paper delivers a probabilistic attempt to prove that the selection of a random three-dimensional finite element (FE) model of a subsoil affects the computed settlements. Parametricanalysis of a random soil block is conducted, assuming a variable subsoil Young’s modulus inparticular finite elements. The modulus is represented by a random field or different-sized setsof random variables; in both cases, the same truncated...
-
Experimental and numerical study on damage detection in an L-joint using guided wave propagation
PublicationW pracy zaprezentowano metodę wykrywania i lokalizacji uszkodzeń w konstrukcji ramowej za pomocą podłużnych i poprzecznych fal sprężystych. Przeprowadzono badania numerczyne i eksperymentalne na modelu bez uszkodzenia oraz na modelu z wsprowadzonym nacięciem. Do modelowania zastosowano metodę elementów spektralnych. W pracy przedstawiono sformułowanie nowego element spektralnego dla ram płaskich bazującego na teorii pręta Mindlina...
-
Numerical simulations of triaxial test with sand using DEM. Archives of Hydro-Engineering and Environmental
PublicationW artykule przedstawiono wyniki symulacji badania trójosiowego dlamateriałów granulowanych. Obliczenia wykonano przy zastosowaniu metodyDEM. Pokazano wpływ momentów kontaktowych na wytrzymałoć próbki. Zbadanowpływ parametrów mikroskopowych na zachowanie się materiału. Wynikiporównano z doswiadczeniami.
-
Numerical investigations of size effects in notched and un-notched concrete beams under bending
PublicationW artykule przedstawiono wyniki numerycznej analizy efektów skali (efektu deterministycznego i stochastycznego) w belkach betonowych z nacięciem i bez nacięcia poddanych zginaniu z uwzględnieniem lokalizacji odkształceń. Obliczenia wykonano przy zastosowaniu metody elementów skończonych i sprężysto-plastycznego modelu z nielokalnym osłabieniem. Pokazano wpływ wielkości belek betonowych na ich nośność oraz rozkład lokalizacji odkształceń.
-
Experimental and numerical investigations of size effects in reinforced concrete beams with steel or basalt bars.
PublicationW artykule przedstawiono wyniki obliczeń efektów skali w belkach betonowych zbrojonych prętami stalowymi i bazaltowymi podczas zginania. Zastosowano model sprężysto-plastyczny z nielokalnym osłabieniem. Rozkład wytrzymałości na rozciąganie był stochastyczny – przestrzennie skorelowany. Belki były geometrycznie podobne. Wyniki porównano z modelem efektu skali Bazanta
-
Numerical simulations of localization of deformation in quasibrittle materials within non-local softening plasticity.
PublicationW artykule przedstawiono model sprężysto-plastyczny z nielokalnym osłabieniem do obliczeń lokalizacji odkształceń w materiałach kruchych. Analizę przeprowadzono dla jednoosiowego ściskania i rozciągania. Obliczenia wykonano dla różnych długości charakterystycznych.
-
Numerical Modelling in flow systems design , W/L ,Energetyka. sem 6, lato 22/23 PG_00042087
e-Learning Courses -
Optimization of the UNRES Force Field by Hierarchical Design of the Potential-Energy Landscape. 1. Tests of the Approach Using Simple Lattice Protein Models
Publication -
Badania teoretyczne łożysk ślizgowych podpartych na czaszy kulistej = Theoretical tests of hydrodynamic journal bearing with self-aligning spherical support
PublicationPrzedstawiono metodykę badań teoretycznych i doświadczalnych łożysk ślizgowych podpartych na czaszy kulistej. Badania teoretyczne prowadzono z wykorzystaniem programu komputerowego MES oraz programu wyznaczającego charakterystyki filmu olejowego. W celu opisu systemu tribologicznego łożysko-podpora stworzono trójwymiarowy model MES łożyska i gniazda. W czasie badań analizowano wpływ wielu czynników mogących ułatwiać lub utrudniać...
-
Use of rapid immunochromatographic tests and PCR for the detection of vaccine viruses (CPV, CDV CAV) in faeces and conjunctival sac swabs of vaccinated dogs
Publication -
Physiological Biomarkers Assessed by Low‐Tech Exercise Tests Predict Complications and Overall Survival in Patients Undergoing Pneumonectomy Due to Lung Cancer
PublicationDue to its debilitating character pneumonectomy this is last‐resort procedure. Preoperative results of the 6‐min walking test (6MWT) help to identify high risk of postoperative complications and increased mortality in patients undergoing lobectomy for lung cancer. The aim of the study was to validate the value of 500 m in 6MWT as an indicator, which differentiates risk of complications in patients undergoing pneumonectomy. 125...
-
Victor Eremeev prof. dr hab.
People -
Approximate solution for Euler equations of stratified water via numerical solution of coupled KdV system
PublicationWe consider Euler equations with stratified background state that is valid for internal water waves. The solution of the initial-boundary problem for Boussinesq approximation in the waveguide mode is presented in terms of the stream function. The orthogonal eigenfunctions describe a vertical shape of the internal wave modes and satisfy a Sturm-Liouville problem. The horizontal profile is defined by a coupled KdV system which is...
-
On the theory and numerical simulation of acoustic and heat modes interaction in a liquid with bubbles: acoustic quasi-solitons
PublicationTeoria rzutowania zaburzenia ogólnego na mody. Zastosowanie metody do badań układu równań typu Korteweg`a-de Vries`a. Rozwiązania analityczne i simulacje numeryczne.
-
Experimental and numerical simulations of flow and heat transfer in heatexchanger elements using liquid crystal thermography.
PublicationPrzedstawienie koncepcji badań eksperymentalnych i numerycznych oraz ich wyników podczas wymiany ciepła w modelach klasycznych i płytowych wymienników ciepła w warunków przepływów przejściowych i turbulentnych.
-
Analytical-numerical approach to solve the transport equation for steady gradually varied flow in open channel
PublicationW pracy przedstawiono metodę rozwiązania równania transportu adwekcyjno-dyfuzyjnego w przypadku ustalonego niejednostajnego przepływu w kanałach otwartych. Metoda wykorzystuje technikę dekompozycji. Do rozwiązania równania adwekcji-dyfuzji zastosowano analityczne rozwiązanie w postaci odpowiedzi impulsowej liniowego równania adwekcji-dyfuzji. Dokonano adaptacji metody dla przypadku ze zmiennymi parametrami. Do rozwiązania drugiej...
-
Changes in Hydrographic Conditions Associated with 2005–2007 Storm Surges in the Odra Mouth — a Numerical Study
Publication -
Numerical Modeling of Steel Surface Hardening in the Process of High Energy Heating by High Frequency Currents
Publication -
Rip currents in the non-tidal surf zone with sandbars: numerical analysis versus field measurements
Publication -
Multibeam Echosounder and LiDAR in Process of 360-Degree Numerical Map Production for Restricted Waters with HydroDron
PublicationIn order to increase the safety of inland navigation and facilitate the monitoring of the coastal zone of restricted waters, a model of multi-sensory fusion of data from hydroacoustic and optoelectronic systems mounted on the autonomous survey vessel HydroDron will be developed. In the research will be used the LiDAR laser scanner and multibeam echosounder. To increase the visual quality and map accuracy, additionally side scan...
-
A new approach to numerical solution of fixed-point problems and its application to delay differential equations
PublicationW pracy rozpatruje się pewne aproksymacje punktu stałego ciągłego operatora A odwzorowującego przestrzeń metryczną w siebie. Wspomniany punkt stały przybliża się tzw. epsilon przybliżonym punktem stałym z przestrzeni skończenie wymiarowej. Udowodnione zostało twierdzenie dające warunki konieczne i dostateczne istnienia punktu stałego w ogólnej przestrzeni metrycznej. Warunki te wyrażone są w terminach epsilon przybliżonego punktu...
-
Experimental study and numerical simulation of low calorific fuel combustion at different oxygen content in the oxydizer
PublicationW pracy przedstawiono wyniki badań eksperymentalnych oraz obliczeń numerycznych procesu spalania paliwa gazowego niskokalorycznego w utleniaczu o podwyższonej temperaturze i zmiennej zawartości tlenu. Badanym paliwem był gaz o składzie zbliżonym do paliwa pochodzącego z gazyfikacji biomasy. Spalanie przeprowadzano dla zmiennej wartości temperatury utleniacza oraz zawartości tlenu. Obliczenia numeryczne wykonano z wykorzystaniem...
-
Numerical analysis of test embankment on soft ground using multi-laminate type model with destructuration
PublicationW artykule przedstawiono model wielopłaszczyznowy (multi-laminate) uwzględniający anizotropię struktury słabonośnych gruntów drobnoziarnistych. Anizotropia indukowana naprężeniem, która otrzymuje się przy zastosowaniu modeli wielopłaszczyznowych, jest dodatkowo wzmocniona poprzez wprowadzenie prekonsolidacji zależnej od orientacji przestrzennej. Model przedstawiono w wersji sprężysto-plastycznej, w której możliwa jest symulacja...
-
Wind tunnel experiments and numerical analysis of the wind load on double-shell cylindrical, vertical tanks
PublicationW pracy przedstawiono wyniki badań modelowych w tunelu aerodynamicznym oraz symulacji komputerowych obciążenia wiatrem pionowych, walcowych zbiorników dwupłaszczowych z dachem pływającym. W badaniach modelowych analizowano wpływ rozstawu między płaszczami zbiornika na wartość i rozkład współczynnika ciśnienia na płaszczach oraz dachu pływającym. Wyniki symulacji komputerowych przeprowadzonych w programie Fluent porównano z wynikami...
-
Two-dimensional diffusion wave model for numerical simulation of inundation - Upper Narew case study
PublicationPrzedstawiono zastosowanie uproszczonego modelu matematycznego przepływu wody ze swobodną powierzchnią, zwanego falą dyfuzyjną, do numerycznej symulacji zalewu powodziowego doliny rzeki. Równania modelu rozwiązano metodą objętości skończonych. Model w dwuwymiarowej wersji wykorzystano do odtworzenia przejścia fali powodziowej przez fragment doliny Górnej Narwi między miejscowościami Suraż i Łapy.
-
Numerical evaluation of spatial time-varying magnetisation of ferritic tubes excited with a C-core magnet
PublicationPrzedstawiono uzyskane metodą elementów skończonych numeryczne oszacowanie czasowo-przestrzennego rozkładu magnetyzacji w ferrytycznych rurach magnesowanych elektromagnesem typu C. Wzięto pod uwagę nieliniowe własności magnetyczne oraz występowanie prądów wirowych. Prąd magnesujący miał charakter piłokształtny.
-
Geographic Information System for Flood Hazard Analysis and Early Warning Using Numerical Weather Predictions
PublicationFloods are a phenomenon which causes significant losses of lives as well as property damage, which in turn severely impact the local economy. The nature of a flooding has been well researched, and several methods of flood hazard simulation have been established over the last decades. The current legislation in the European Union requires the Member States to create, maintain and update flood risk and hazard maps, as well as identify...
-
Two - scale model for concrete beams subjected to three point bending - numerical analyses and experiments
PublicationArtykuł omawia dwu-skalowe podejście do betonu przy wykorzystaniu połączonych modeli. Metodę elementów skończonych zastosowano na poziomie makro. Na poziomie mikro zastosowano metodę elementów dyskretnych. Macierz sztywności wyznaczono na podstawie tensora naprężeń wyznaczonego w skali mikro. Wyniki numeryczne dw-skalowe porównano z wynikami dyskretnymi dla całego obszaru.
-
Numerical simulations of a triaxial test in granular bodies using discrete particle simulations with contact moments
PublicationW artykule przedstawiono wyniki symulacji badania trójosiowego dla materiałów granulowanych. Obliczenia wykonano przy zastosowaniu metody DEM. Pokazano wpływ momentów kontaktowych na wytrzymałość próbki. Zbadano wpływ parametrów mikroskopowych.
-
Experimental and numerical assessment of size effect in geometrically similar slender concrete beams with basalt reinforcement
PublicationW artykule przedstawiono doświadczalne i numeryczne wyniki badań efektu skali w geometrycznie podobnych smukłych belkach betonowych ze zbrojeniem bazaltowym. Doświadczenia zostały symulowane stosując metodę elementów skończonych w oparciu o model sprężysto-plastyczny z degradacją sztywności i nielokalnym osłabieniem. Otrzymano dobrą zgodność wyników doświadczalnych z numerycznymi.
-
Experimental and numerical investigations of concrete behaviour at meso-level during quasi-static splitting tension.
PublicationArtykuł omawia wyniki numeryczne dotyczące pękania betonu uzyskane stosując metodę elementów dyskretnych. Dwuwymiarowe obliczenia wykonano dla próbek betonowych podczas rozłupywania. Beton został opisany jako model 4-fazowy. Mikrostruktura betonu odpowiadała zdjęciom tomograficznym. Zbadano wpływ warunków brzegowych na proces pękania. W obliczeniach zwrócono uwagę na porzebieg zjawisk mikrostrukturalnych przebieg pękania. Wyniki...
-
INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION
Journals -
Upper respiratory tract infections and influenza-like illnesses among healthcare workers: are serological tests useful in monitoring influenza and influenza-like illness?
Publication -
Mathematical and numerical modelling, P, IDE+EMSS, sem. 01, letni 23/24, stacjonarne, II stopień, (PG_00057379)
e-Learning CoursesOpanowanie wiedzy i umiejętności dotyczących tworzenia oraz rozwiązywania modeli obliczeniowych wybranych układów mechanicznych.
-
Experimental and numerical simulations of flow and heat transfer in heat exchanger elements using liquid crystal thermography.
PublicationW artykule przedstawiono założenia oraz sposób prowadzenia eksperymentu i obliczeń numerycznych wymiany ciepła w modelu wymiennika ciepła przy użyciu termografii ciekłokrystalicznej.
-
Combining Satellite Imagery and Numerical Modelling to Study the Occurrence of Warm Upwellings in the Southern Baltic Sea in Winter
Publication -
Numerical analysis of influence of intermediate stiffeners setting on the stability behaviour of thin-walled steel tank shell
Publication -
Numerical analysis by FEM and analytical study of the dynamic thermal behavior of hollow bricks with different cavity concentration
PublicationThis paper presents the investigation results on the influence of the cavity concentration in hollow bricks on static and dynamic thermal parameters: a time lag, a decrement factor, an equivalent thermal diffusivity (ETD) and an equivalent thermal conductivity (ETC). The dynamic thermal behavior of hollow bricks is studied with an optimized cavity shape to reduce the intensity of radiation and convective heat exchange. The thermal...
-
Mechanisms positioned in a neighbourhood of their singular positions - velocity amplification in the electromagnetic damping. Part 2. Numerical Verification
PublicationPraca prezentuje zagadnienia występujące podczas elektromagnetycznego tłumienia drgań układów mechanicznych. Analizowano zachowania układu ciągłego i jego drgania. Aby przyśpieszyć tłumienie, wprowadzono specjalny dwuramienny mechanizm umieszczony pomiędzy elementem drgającym i elementem tłumiącym drgania. Mechanizm ustawiony jest w pobliżu swojego ustawienia osobliwego. Aby określić potencjalny kierunek zmian prowadzący do poprawić...
-
Numerical analysis of open channel steady gradually varied flow using the simplified saint-venant equations
PublicationFor one-dimensional open-channel flow modeling, the energy equation is usually used. There exist numerous approaches using the energy equation for open-channel flow computations, which resulted in the development of several very efficient methods for solving this problem applied to channel networks. However, the dynamic equation can be used for this purpose as well. This paper introduces a method for solving a system of non-linear...
-
Numerical analysis by FEM and analytical study of the dynamic thermal behavior of hollow bricks with different cavity concentration
PublicationThis paper presents the investigation results on the influence of the cavity concentration in hollow bricks on static and dynamic thermal parameters: a time lag, a decrement factor, an equivalent thermal diffusivity (ETD) and an equivalent thermal conductivity (ETC). The dynamic thermal behavior of hollow bricks is studied with an optimized cavity shape to reduce the intensity of radiation and convective heat exchange. The thermal...
-
Numerical model of human head phantom to ensure dosimetry of dose components for boron neutron capture therapy
PublicationExtremely important aspects of the boron neutron capture therapy are, first of all, administering to the patient a boron compound that selectively reaches the neoplastic cells, and in the second step, the verification of the irradiation process. This paper focuses on the latter aspect, which is the detailed dosimetry of the processes occurring after the reaction of thermal neutrons with the boron-10 isotope. The results of computer...
-
Numerical methodology for evaluation the combustion and emissions characteristics on WLTP in the light duty dual-fuel diesel vehicle
PublicationThe worldwide aim of reducing environmental impact from internal combustion engines bring more and more stringent emission regulations. In 2017 by EU has been adopted new harmonized test procedure called WLTP. In general terms this test was designed for determining the levels of harmful emissions and fuel consumption of traditional and hybrid cars. This procedure contains specific driving scenarios which representing reallife driving...
-
Effect of solar radiation on current-carrying capacity of PVC-insulated power cables – the numerical point of view
PublicationPower cables are usually buried in the soil, which results in their relatively high current-carrying capacity. However, there are cases in which the starting/final section of a cable line runs along a pole of an overhead power line. Power cables can be directly exposed to solar radiation then, and this negatively influences their current-carrying capacity as well as estimated life of the cables’ insulation. An analysis of thermal...
-
Simulating Power Generation from Photovoltaics in the Polish Power System Based on Ground Meteorological Measurements—First Tests Based on Transmission System Operator Data
PublicationThe Polish power system is undergoing a slow process of transformation from coal to one that is renewables dominated. Although coal will remain a fundamental fuel in the coming years, the recent upsurge in installed capacity of photovoltaic (PV) systems should draw significant attention. Owning to the fact that the Polish Transmission System Operator recently published the PV hourly generation time series in this article, we aim...
-
ESAIM-MATHEMATICAL MODELLING AND NUMERICAL ANALYSIS-MODELISATION MATHEMATIQUE ET ANALYSE NUMERIQUE
Journals -
Temperature, velocity and mean turbulence structure in strongly heated internal gas flows. Comparison of numerical predictions with data
PublicationW pracy przedstawiono symulacje numeryczne przy użyciu szeregu modeli turbulencji celem analizy silnie ogrzewanego przepływu powietrza w pionowych rurach. Obliczenia porównano z danymi eksperymentalnymi. Analizowano modyfikacje pola prędkości, temperatury i turbulencji. W rozpatrywanych warunkach odnotowano silną wrażliwość obliczeń na silnie zmieniające się pole temperatury. Stwierdzono, że analizowane przypadki najlepiej odzwierciedla...
-
Controlling nodal displacement of pantographic structures using matrix condensation and interior-point optimization: A numerical and experimental study
PublicationThis study presents an innovative approach for the precise control of nodal displacements in pantographic structures. The method is founded on the Matrix Condensation of Force Method, seamlessly integrated with an Interior Point Optimization algorithm. This combination offers a unique advantage by allowing users to manipulate displaced nodes within a defined coordination domain. Furthermore, this approach introduces the Interior...
-
Numerical Study on Seismic Response of a High-Rise RC Irregular Residential Building Considering Soil-Structure Interaction
Publication -
New trim configurations for laser trimmed thick-film resistors - theoretical analysis, numerical simulation and experimential verification
PublicationW pracy przedstawiono nowe podejście do korekcji rezystorów warstwowych polegające na wytwarzaniu dodatkowego kontaktu w celu rozszerzenia zakresu korekcji i uproszczenia projektowania. Ponadto zaprezentowano nową szybką metodę wyznaczania charakterystyk korekcyjnych a także weryfikację eksperymentalną. Przedstawiono wyniki w postaci zakresów korekcji i względnych przyrostów rezystancji w funkcji kształtu dodatkowego kontaktu oraz...
-
Investigation of the flow, heat and mass transfer and emissions in pulverized fuel fired boiler using physical and numerical modeling.
PublicationPraca przedstawia wykorzystanie techniki modelowania fizycznego trójwymiarowego oraz obliczeń numerycznych umożliwiających symulację rzeczywistych procesów spalania paliw stałych i gazowych w urządzeniach energetycznych. Dodatkowo wyniki obliczeń porównano z wynikami modelowania fizycznego oraz pomiarów na obiekcie rzeczywistym.
-
Experimental and numerical investigation of crosstalk effect in coupled coplanar waveguides - part II: Multimode coupled line representation
PublicationW pracy przedstawiono metodę analizy nieidealności połączenia poszczegółnych fragmentów rozłożonego ekranu na zjawisko przesłuchu w strukturze sprzężonych falowodów koplanarnych z uziemionym centralnym paskiem. Analiza bierze pod uwagę efekty dyspersji oraz wielorodzajową naturę rozchodzenia się fali elektromagnetycznej w strukturze wieloprzewodowej. Teorię zweryfikowano praktycznie uzyskując bardzo dobrą zgodność pomiędzy wynikami...
-
International Series of Numerical Mathematics
Journals -
<title>Synchronous optical transmission data link integrated with FPGA for TESLA FEL SIMCON system: long data vector optical transceiver module tests</title>
Publication -
Properties comparison of rubber and three layer PTFE-NBR-bronze water lubricated bearings with lubricating grooves along full bush circumference based on experimental tests
PublicationWater lubricated bearings have been in industrial use for well over a century. During the last decade their traditional range has been expanded with new, modern products. Despite that fact, certain solutions continue to employ the standard rubber bearing with lubricating grooves located along entire bush circumference. The work presents experimental research conducted on comparable sliding bearings with lubrication grooves along...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K05
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K03
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K04
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K01
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180...
-
Mathematical and numerical modelling, P, IDE, sem. 01, summer 21/22,(M:00057379) (MaNM, P, summer 21/22)
e-Learning CoursesThe aim of this subject is to acquire knowledge to implement engineering problem in Matlab code
-
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW
Journals -
The effect of roasting beetroot and chicory on the anti-oxidative activity of their extracts
Open Research DataThe eThe data set presents the results of the assessment of the impact of roasting raw materials in the form of beetroot and chicory on their antioxidant activity measured by the standard ABTS and DPPH radical tests. The numerical results were compared with the visual assessment of the roasted raw materials. The obtained results confirmed the increase...
-
Advanced Experimental and Numerical Analysis of Behavior Structural Materials Including Dynamic Conditions of Fracture for Needs of Designing Protective Structures
Publication -
Experimental and numerical investigation of crosstalk effect in coupled coplanar waveguides - part i: bi-mode coupled line representation
PublicationW pracy przedstawiono analizę zjawiska przesłuchu w strukturze sprzężonych falowodów koplanarnych. Analiza wykorzystując metodę przestrzeni widmowej i bazując na dwurodzajowym modelu pary linii sprzężonych uwzględnia efekty dyspersji obserwowane w zakresie wysokich częstotliwośći. Przedyskutowano zagadnienie sposobu definicji impedancji charakterystycznych dla prowadzonych rodzajów pola. Wyniki modelowania numerycznego potwierdzono...
-
An investigation of structural responses of inverted pavements by numerical approaches considering nonlinear stress-dependent properties of unbound aggregate layer
Publication -
Energy conversion in systems-contained laser irradiated metallic nanoparticles - comparison of results from analytical solutions and numerical methods
PublicationThis work introduces the theoretical method of metallic nanoparticles’ (NPs’) heat and mass transfer where the particles are coated on a surface (base), together with considering the case wherein nanoparticles move freely in a pipe. In order to simulate the heat transfer, energy and radiative transfer equations are adjusted to the considered issue. NPs’ properties are determined following the nanofluidic theories, whereas absorption...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #24 - #25.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #24 (upper, rotating), #25 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #28 - #29.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #28 (upper, rotating), #29 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #30 - #31.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #30 (upper, rotating), #31 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #20 - #21.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #20 (upper, rotating), #21 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #22 - #23.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #22 (upper, rotating), #23 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #28 - #29.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #28 (upper, rotating), #29 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
Specimen running-in. Prep. to sliding friction tests. Ring-on-ring contact. Sintered alumina ceramics (98%). Paraffin oil lubrication. Specimen set #26 - #27.
Open Research DataSpecimen running-in procedure. Preparation to sliding friction tests in ring-on-ring contact. Sintered alumina ceramics (98%) in self-mated contact. Lubrication: paraffin oil. Sliding velocity: 0.2 m/s. Mean contact stress: 10 MPa. Test rig: PT-3 Tribometer. Specimen set #26 (upper, rotating), #27 (lower, non-rotating)CZ_PRZYS.MAT - accelerometerMOM_TAR.MAT...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - PARAFFIN OIL. Specim. set K08
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: PARAFFIN OIL. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K02
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K06
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
VIbration monitoring in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). Lubricant - DISTILLED WATER. Specim. set K07
Open Research DataVIbration monitoring in reciprocating siding friction tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DISTILLED WATER. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15,...
-
Modification and Optimization of the United-Residue (UNRES) Potential Energy Function for Canonical Simulations. I. Temperature Dependence of the Effective Energy Function and Tests of the Optimization Method with Single Training Proteins
Publication -
THREE-DIMENSIONAL numerical investigation of MHD nanofluid convective heat transfer inside a CUBIC porous container with corrugated bottom wall
PublicationSimultaneous use of porous media and nanofluid as a heat transfer improvement method has recently captivated a great deal of attention. The heat transfer and entropy production of the Cu-water nanofluid inside a cubic container with a heated bottom wavy wall and an elliptic inner cylinder were numerically analyzed in this study. The container is partitioned into two sections: the left side is filled with permeable media and...
-
Numerical analysis of the two‐phase steam‐air heat transfer flow induced in smooth and corrugated channel using the VOF model
Publication -
THREE-DIMENSIONAL NUMERICAL INVESTIGATION OF MHD NANOFLUID CONVECTIVE HEAT TRANSFER INSIDE A CUBIC POROUS CONTAINER WITH CORRUGATED BOTTOM WALL
Publication -
Wear in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K01
Open Research DataFriction and wear tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180 and 300s. (stored in separate folders).Specimen...
-
Wear in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K04
Open Research DataFriction and wear tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180 and 300s. (stored in separate folders).Specimen...
-
Wear in reciprocating siding friction tests. Ball-on-flat contact. Sintered alumina ceramics (98%). No lubrication (DRY). Specim. set K05
Open Research DataFriction and wear tests in ball-on-flat contact. Both specimens made of sintered alumina ceramics (98%) - self-mated contact.Linear reciprocating motion.Lubrication: DRY. Sliding velocity (peak): 0.1 m/s. Load (normal force): 5N. Test rig: TPZ-1 Tribometer.Running time: progressive increments of 10, 15, 30, 60, 180 and 300s. (stored in separate folders).Specimen...