Search
Search results for: LOAD INTRODUCTION
-
Load introduction to composite columns revisited—Significance of force allocation and shear connection stiffness
PublicationThe AISC 360-16 Specification recommends that the design shear force between parts of a composite column in the load introduction area shall be calculated based on the force allocation at ultimate limit state. Applicability of this straightforward method to the load levels that usually arise in slender composite columns is questionable, as this capacity-based force allocation is only true when the axial force is equal to the plastic...
-
Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratios
PublicationThe paper describes a method of laboratory tests necessary for identifying the mechanical properties of polyester coated fabrics named Precontraint 1202S with PVDF surface treatment. Two sets of initial material parameters for dense net model and orthotropic model are specified. Material parameters for Precontraint 1202S coated fabric are specified on the basis of the biaxial tensile tests for different load ratios. In order to...
-
Application and mechanical properties of aluminium alloys
PublicationThe paper presents a short survey of the application and mechanical properties of aluminium alloys. This area of scientific research is still developing, the authors restricted it to about 30 papers. Numerical simulations of the aluminium bracket are also investigated. The authors propose a solution to increase the load capacity of aluminium brackets with application of the additional cover plates. This study is proposed as an...
-
Experimental tests for the determination of mechanical properties of PVC foil
PublicationThe paper presents an application of the PVC film in civil engineering. Mechanical behaviour of the PVC film applied for suspended ceilings, in the form of a stretch ceiling is investigated under uniaxial and biaxial tensile tests. The study is focused on the determination of mechanical properties from experimental data (uniaxial and biaxial tensile tests). The uniaxial cyclic tests are performed in order to observe a variation...
-
Modelowanie kratownicy z kształtowników giętych na zimno z mimośrodami dodatnimi w węźle = Modelling of truss with cold-formed section and positive eccentricyty in the node.
PublicationThe topic of this research is establishing load-carrying capacity of compressed and tensed chords of trusses made of cold-formed open cross-sections. Occurrence of bending in the truss’ chord is the result of specific production technology assumed by the designer and producer of lattice girder’s systems. The aim of this research is to present methodology of conduct while creating numerical models that best depict the behaviour...
-
Modeling of truss with cold-formed section and positive eccentricity in the node
PublicationThis work is dedicated to establishing the load carrying capacity of tensed and compressed truss’ nodes made of cold-formed open cross sections. The occurrence of bending in the truss’ nodes is the result of a specific production technology for system lattice girders assumed by the designer and the producer. The aim of this research is to present the methodology of conduct for creation of computational models that best depict the...
-
Mechanical properties of PVDF-coated fabric under tensile tests
PublicationThis article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1...
-
Instructor Presence in Video Lectures: Preliminary Findings From an Online Experiment
PublicationMotivation. Despite the widespread use of video lectures in online and blended learning environments, there is still debate whether the presence of an instructor in the video helps or hinders learning. According to social agency theory, seeing the instructor makes learners believe that s/he is personally teaching them, which leads to deeper cognitive processing and, in turn, better learning outcomes. Conversely, according to cognitive...
-
Mechanical Properties of Twisted Carbon Nanotube Bundles with Carbon Linkers from Molecular Dynamics Simulations
PublicationThe manufacturing of high-modulus, high-strength fibers is of paramount importance for real-world, high-end applications. In this respect, carbon nanotubes represent the ideal candidates for realizing such fibers. However, their remarkable mechanical performance is difficult to bring up to the macroscale, due to the low load transfer within the fiber. A strategy to increase such load transfer is the introduction of chemical linkers...
-
Experimental research on a hydrodynamic thrust bearing with hydrostatic lift pockets: Influence of lubrication modes on bearing performance
PublicationThe aim of the study is to investigate the performance of a thrust bearing equipped with hydrostatic lift pockets under different lubrication modes. Three types of flat land bearing lubrication modes are studied experimentally: hydrostatic lubrication (HS; forced oil injection to the pockets), hybrid lubrication (HS + HD; hydrostatic lubrication combined with the external forced bearing oil supply) and hydrodynamic lubrication...
-
Badania laboratoryjne wybranych sposobów koordynacji regulatora transformatora blokowego oraz regulatora generatora
PublicationWprowadzenie wymogu stosowania transformatorów blokowych z przekładnią regulowaną pod obciążeniem spowodowało konieczność określenia właściwego sposobu podziału kryteriów sterowania pomiędzy regulator generatora a regulator transformatora blokowego. W referacie zwrócono uwagę na aspekt miejsca pomiaru napięć. Ma to istotny wpływ zarówno na algorytm jak i jakość regulacji. Rozważania teoretyczne zilustrowane zostały wynikami prób...
-
Modelling and Analysis of the Positioning Accuracy in the Loading Systems of Mobile Cranes
PublicationIn this work, the authors analyse the influence of the order and range of sequential movements of a crane's working members on the accuracy of the final cargo positioning. The analysis was conducted on the basis of a specially developed method in which the authors proposed the introduction of a geometrical indicator of positioning the load in the intermediate positions (after completing each movement sequence) and in the target...
-
An Overview of Bidirectional EV Chargers: Empowering Traction Grid-Powered Chargers
PublicationIn recent years, the number of electric vehicles has been at least doubling year after year. As a result, today electric vehicles already account for approximately 10% of the global automotive market, which positively affects environment in urbanized areas. However, to take full advantage of the EV integration it is necessary to use renewable sources for their charging; optimally place charging stations/terminals; optimally manage...
-
Tuning Electrochemical Performance by Microstructural Optimization of the Nanocrystalline Functional Oxygen Electrode Layer for Solid Oxide Cells
PublicationFurther development of solid oxide fuel cell (SOFC) oxygen electrodes can be achieved through improvements in oxygen electrode design by microstructure miniaturisation alongside nanomaterials implementation. In this work, improved electrochemical performance of an La0.6Sr0.4Co0.2Fe0.8O3-d (LSCF) cathode was achieved by the controlled modification of the La0.6Sr0.4CoO3-d (LSC) nanocrystalline interlayer introduced between a porous...
-
Effect of Overloaded Vehicles on Whole Life Cycle Cost of Flexible Pavements
PublicationThe phenomenon of vehicle overloading—illegal exceeding of maximum legal weight of vehicles, is a serious problem both in developing and developed countries around the world. Overloaded vehicles occur less frequently in comparison to properly loaded vehicles but due to their greater potential to cause damage they significantly contribute to distress of pavement structure. As studies show, the number of overloaded vehicles increases...
-
Future Directions in Quantum Materials Synthesis
PublicationThe following sections are included: Introduction The Current State of the Art The Frontiers Exploring the Frontiers Conclusion
-
Sugar Fee in Poland as an Example of New Fiscal Burdens and Stimulation of Consumer Behaviour
PublicationDuring the economic downturn caused by the COVID-19 pandemic, the amount and structure of tax burdens imposed by the state on businesses continue to increase, as shown on the example of the newly introduced sugar fee. A new tax-related burden imposed on businesses and consumers producing and consuming sugar-sweetened beverages appeared at the beginning of 2021. The aim of the paper is to present the fiscal burdens that accompany...
-
OCENA WŁAŚCIWOŚCI STALI STOSOWANEJ W STARYCH OBIEKTACH KOLEJOWYCH
PublicationThe scope of the paper is to give an introduction to the assessment subject matter of steel properties used in old railway bridges. The mechanical and chemical properties of construction steel extracted from old steel bridges are generally investigated by tensile tests, impact tests through the Charpy pendulum impact V-notch, and an optical emission spectrometer. Besides descriptions of the tests, the chosen chemical and mechanical...
-
Locking effects in finite elemnt method
PublicationIn the present paper a short survey of the locking effect literature is given. As this area of scientific research is still developing, the author of the paper restricted it to about 70 papers. This study is proposed as an introduction to the comprehensive investigation of locking effects.
-
Reforms of Polish Antitrust Law: Closer to, or Further From, the European Model? Journal of European Competition Law and Practice
PublicationThe Polish Act on the Protection of Competition and Consumers has been recently amended. Changes include the introduction of a two-phase based merger control, a more efficient leniency program, and the administrative liability of individuals involved in antitrust agreements.
-
An Intelligent Decision-Making System for Autonomous Units Based on the Mind Model
PublicationThis article presents a specific part of current trends in autonomous robotics. It pays special attention to the basic aspects of cognitive architecture. After a brief introduction, we shortly describe the Intelligent System of Decision-making developed at the Gdansk University of Technology.
-
Biologically active compounds based on the carbazole scaffold - synthetic and mechanistic aspects
PublicationDoctoral dissertation is divided into three main parts: introduction, results and discussion and experimental. The introduction is divided into four main parts which describe: 5-hydroxytryptamine receptors, the most popular antidepressants, new compounds based on the carbazole structure with affinity for serotonin receptors, telomeres and telomerase with their functions, telomerase inhibition strategies, carbazoles approved in...
-
MANAGING LEARNING PROCESS WITH E-LEARNING TOOL
PublicationThis article presents one possibility to employ Moodle, the free e-Leaning platform, to organize learning understood as a process. Behavioral approach and application to massive courses are assumed. A case study is presented, where the introduction of Moodle resulted in better student performance in homework
-
Effects of n-butanol presence, inlet loading, empty bed residence time and starvation periods on the performance of a biotrickling filter removing cyclohexane vapors from air
PublicationThis paper presents the results of investigations on the removal of cyclohexane vapors from air using a peat-perlite packed biotrickling filter. Effects of basic process parameters i.e. IL (inlet loading) and EBRT (empty bed residence time) as well as introduction of n-butanol to the treated air stream and starvation periods on the process performance were evaluated. The results show that the introduction of hydrophilic n-butanol...
-
Constructing autonomous agents using the cognitive-emotional architecture of the mind
PublicationThe article discusses an important issue regarding the humanoid aspects of modern science related to the autonomy of systems and robotization. Particular attention is paid to the basic aspects of cognitive architecture. After a short introduction, the Intelligent Decision Making System, developed at the ETI Faculty of the Gdańsk University of Technology, is described.
-
Tailoring Graphene to Achieve Negative Poisson's Ratio Properties
PublicationGraphene can be made auxetic through the introduction of vacancy defects. This results in the thinnest negative Poisson's ratio material at ambient conditions known so far, an effect achieved via a nanoscale de-wrinkling mechanism that mimics the behavior at the macroscale exhibited by a crumpled sheet of paper when stretched.
-
Analyzing Preconditions to Introduce Internet Voting in Portugal: Insights from the Estonian Model
PublicationInternet voting has been trialed or introduced for several countries, including Norway, Portugal, United States, United Kingdom and Switzerland as an additional voting channel to increase voter turnout and, also to modernize the electoral process. However, only Estonia has successful introduced internet voting, deploying e-enabled elections in general governmental levels. This paper aims to provide an exploratory study on the Estonian...
-
Design thinking qualifications framework – standardizing the innovative approach to entrepreneurial education delivery to engineering students
PublicationHighly competitive labor market stimulates increasing expectations towards fresh university alumni. It is not enough to be an expert - well educated and often experienced - in chosen discipline. High variability of the business environment, continuous change, number of risks, together with higher work demand than supply, shape clear employers’ expectations: entrepreneurial employees are wanted. On this ground a need for entrepreneurial...
-
Nomination Dossier, The Modernist Centre of Gdynia, Part 2b, History and Development
PublicationHistory and development of Gdynia, from Medieval times up until today. The project concerns such chapters as: Introduction; The village of Gdynia; Gdynia as a seaside resort; Construction of the port and the city in the interwar period; The modernist city centre – layout; architecture;Architecture of the city centre; South Pier and Grand District; Post-war development of Śródmieście: a continuation
-
Phraseological Units in Audiovisual Translation. A Case Study of Polish Dubbing of Disney’s 'The Little Mermaid'
PublicationThe paper aims to discuss phraseological units as the object of audiovisual translation in the Polish dubbing of Disney’s 'The Little Mermaid', to discuss the role of phraseological translation techniques, and to present possible translation inconsistencies. A theoretical introduction presents definitions for crucial terms. It is followed by the analysis of the corpus of phraseological units in Disney’s The Little Mermaid and...
-
Conceptual fuzzy model of the polish internet mortgage market
PublicationThe aim of this paper is to present the conceptual structure of basic fuzzy model representing Polish Internet mortgage market. The paper starts with introduction describing the market complexities and challenges, and description of previously created rule based model. Then the steps of the process of proposed model fuzzyfication are presented. Final part of the paper consists of conclusions and directions for future research.
-
Clean energy in the European Union: Transition or evolution?
PublicationIn this paper, we analyse two phenomena. First, the relationship between greenhouse gases emission and effectiveness of the European Union energy policies and second the transition from the fossil fuels to renewable energy sources. We run two-step data analysis concerning 25 European Union member states in the period from 1990 to 2018. We use information on greenhouse gases emission, introduction of new energy policies, source...
-
Machine Learning and Electronic Noses for Medical Diagnostics
PublicationThe need for noninvasive, easy-to-use, and inexpensive methods for point-of-care diagnostics of a variety of ailments motivates researchers to develop methods for analyzing complex biological samples, in particular human breath, that could aid in screening and early diagnosis. There are hopes that electronic noses, that is, devices based on arrays of semiselective or nonselective chemical sensors, can fill this niche. Electronic...
-
Simulation of the IT Service and Project Management Environment
PublicationThe authors of this paper present a simulation of the socio-technical system in which teams of students – regarded as low-maturity organizations – were given a task to utilize the (relatively) mature technologies that support IT project and service management. The experiment consisted of the following phases: teams formation, introduction to technologies used during the simulation, performing a set of reactive and proactive service...
-
COLLABORATIVE LEARNING ENVIRONMENT FOR ENGINEERING EDUCATION (COLED)
PublicationCollaborative Learning Environment for Engineering Education is a European project implemented under the Erasmus + program, The main goal of 5 partners from 4 different European countries – Bulgaria, Poland, Portugal and Romania is to develop an innovative collaborative training approach, encompassing curricula related to the introduction of enterprise automation. Project activities are carried out in the period from Dctober 2018...
-
PHYSICAL MODELLING OF GEOTECHNICAL STRUCTURES IN PORTS AND OFFSHORE
PublicationThe physical modelling of subsoil behaviour and soil-structure interaction is essential for the proper design of offshore structures and port infrastructure. A brief introduction to such modelling of geoengineering problems is presented and some methods and experimental devices are described. The relationships between modelling scales are given. Some examples of penetration testing results in centrifuge and calibration chamber...
-
Educational and cognitive aspects of adaptation of nonuse spaces in monumental sacral objects.
PublicationThe area of attics and towers in historic churches in Europe are yet quite inaccessible places for visitors, shrouded in the atmosphere of mysticism, hiding many secrets. Introduction of the new public function into the non-used zones of the monumental sacral objects has many aspects including educational and cognitive ones which are discussed in the following article. The article indicates items that can be found in the zone above...
-
Voltage Conditions in Low Voltage Grid with Connected Mictogeneration
PublicationThe introduction of distributed generation into a low voltage grid may cause voltage problems in it. The paper discusses the effect of microgeneration on voltage levels in a low voltage grid. A real low voltage grid of considerable length was selected for the analysis. The grid primarily supplies residential buildings in a rural area. Results of tests that consider potential measures which could be applied in this grid to improve...
-
Engineering Analysis with ANSYS Software Second Edition
PublicationThe best way to learn complex systems is by means of hands-on experience. With an innovative and clear tutorial based approach, this powerful book provides a comprehensive introduction to the fundamental areas of engineering analysis needed on research or commercial engineering projects. With its detailed step-by-step explanations and sample problems, this book will develop the reader's understanding of FEA and their ability to...
-
Endoscopic Video Classification with the Consideration of Temporal Patterns
PublicationThe article describes a novel approach to automatic recognition and classification of diseases in endoscopic videos. Current directions of research in this field are discussed. Most presented methods focus on processing single frames and do not take into consideration the temporal relationship between continuous classifications. Existing approaches that consider the temporal structure of an incoming frame sequence are focused on...
-
General, Mild, and Metal-Free Functionalization of Indole and Its Derivatives Through Direct C3-Selenylation
PublicationA very mild method for the introduction of functionalized alkylselenyl group at C-3 position of the indole ring was developed. The proposed procedure consists of an electrophilic substitution of indole and its derivatives with bis(O,O-diisopropoxyphosphorothioyl) diselenide and subsequent cleavage of the P–Se bond with tetrabutylammonium fluoride in the presence of various electrophilic reagents. This method can be successfully...
-
Towards 5G — Cloud-based Radio Access Networks
PublicationIn the paper a general concept of the 5G network architecture is presented as well as system requirements having impact on innovative solutions in the 5G network are highlighted. A major part of the paper is both presentation and discussion of the problem of Cloud Radio Access Network introduction for public networks in which the cell and resource virtualisation will be implemented. On the other hand, the problem of resource virtualization...
-
Simple SIR models with Markovian control
PublicationWe consider a random dynamical system, where the deterministic dynamics are driven by a finite-state space Markov chain. We provide a comprehensive introduction to the required mathematical apparatus and then turn to a special focus on the susceptible-infected-recovered epidemiological model with random steering. Through simulations we visualize the behaviour of the system and the effect of the high-frequency limit of the driving...
-
Influence of thermal effects on mechanical properties of PVDF-coated fabric
PublicationThis paper describes the method of laboratory tests necessary for identification of temperature influence on mechanical properties of polyvinylidene fluoride-coated polyester fabric often used for tensile structures. Two nonlinear model descriptions are investigated. The first one is based on the piece-wise linear relations between stress and strain and the second one on the Murnaghan model of solid behavior. This paper is proposed...
-
Polyester sail technical woven fabric behaviour under uniaxial and biaxial tensile tests
PublicationThe paper is focused on the identification of mechanical properties of a sail technical woven fabric (yacht sailcloth polyester) style 480 AP with MTO (Medium Tempered Optimized) finish. The non-linear elastic behaviour of the fabric applied for sails is investigated under uniaxial and biaxial tensile tests. Comparison of non-linear elastic parameters with others polyester coated fabrics is made. This paper is intended to be an...
-
Wideband Signal Generation for Jamming Radio-Controlled Improvised Explosive Devices
PublicationThis paper focuses on modelling operation of a wideband jamming signal generator, considering the effects present in real device which influence the shape of transmitted signal’s spectrum. Introduction is followed by a brief overview of AEGIS project, aim of which is to develop a mobile generator of electromagnetic curtain. Next, simulation model is described which includes the factors...
-
Applying of Doped Graphene Oxide Coatings for Corrosion Prevention
PublicationINTRODUCTION Graphene is a carbonaceous material characterized by extraordinary properties (high electron mobility, high surface area, high mechanical strength of 1100 GPa, very dense network hindering the passage of even the smallest helium atoms) [1]. Therefore, it found many applications, also as an anti-corrosive layer [2]. Electrophoretic Deposition (EPD) is one of the methods to deposit coatings. However, due to slight solubility...
-
Critical Success Factors for Knowledge Management in SMEs in the KIBS Sector
PublicationThe purpose of this paper is to examine knowledge management practices and critical success factors (CSFs) for their introduction in small and medium-sized enterprises (SMEs) in the knowledge-intensive business services (KIBS) sector. Methodology: The paper is based on the results of an exploratory qualitative survey involving owners and managers of small and medium-sized companies operating in the KIBS sector. In the survey, eight...
-
Ground Tire Rubber Filled Flexible Polyurethane Foam—Effect of Waste Rubber Treatment on Composite Performance
PublicationThe application range of flexible polyurethane (PU) foams is comprehensive because of their versatility and flexibility in adjusting structure and performance. In addition to the investigations associated with further broadening of their potential properties, researchers are looking for new raw materials, beneficially originated from renewable resources or recycling. A great example of such a material is ground tire rubber (GTR)—the...
-
Applications of semi-definite optimization in quantum information protocols
PublicationThis work is concerned with the issue of applications of the semi-definite programming (SDP) in the field of quantum information sci- ence. Our results of the analysis of certain quantum information protocols using this optimization technique are presented, and an implementation of a relevant numerical tool is introduced. The key method used is NPA discovered by Navascues et al. [Phys. Rev. Lett. 98, 010401 (2007)]. In chapter...