Publications
Filters
total: 625
Catalog Publications
-
Self-compacting grout to produce two-stage concrete
PublicationTraditional concrete (TC) is primarily composed...
-
Mechanics of Micro- and Nano-Size Materials and Structures
PublicationNanotechnology knowledge is always looking to expand its boundaries to achieve the mostsignificant benefit to human life and meet the growing needs of today. In this case, we can refer tomicro- and nanosensors in micro/nano-electromechanical systems (MEMS/NEMS). These electricaldevices can detect minimal physical stimuli up to one nanometer in size. Today, micro/nano-sensordevices are widely used in the...
-
On effective properties of beam-lattice structures made of flexoelectric materials
PublicationThe e-Workshop Advances in ELAstoDYNamics of architected materials and BIOmaterials International Research Project (IRP) Coss&Vita of the CNRS
-
Large deformations formulation and elastic instability of single layer nanoplate embedded on polymer medium in nonlocal continuum mechanic
Publication -
Nonlocal nonlinear bending of rectangular nanoscale plate including central hole via complex differential quadrature method
Publication -
Vibro-Electrical Behavior of a Viscoelastic Piezo-Nanowire in an Elastic Substrate Considering Stress Nonlocality and Microstructural Size-Dependent Effects
PublicationThis research deals with dynamics response of a Pol/BaTiO3 nanowire including viscosity influences. The wire is also impressed by a longitudinal electric field. Hamilton's principle and Lagrangian strains are employed in conjunction with a refined higher-order beam theory in order to derive equations of motion. By combining nonlocality and small size...
-
Machine learning-based prediction of preplaced aggregate concrete characteristics
PublicationPreplaced-Aggregate Concrete (PAC) is a type of preplaced concrete where coarse aggregate is placed in the mold and a Portland cement-sand grout with admixtures is injected to fill the voids. Due to the complex nature of PAC, many studies were conducted to determine the effects of admixtures and the compressive and tensile strengths of PAC. Considering that a prediction tool is needed to estimate the compressive and tensile...
-
Badania systemów powstrzymujących pojazd przed wypadnięciem z drogi - cz. I
PublicationTransportation systems are designed and used so as to effectively and safely relocate people, goods and services. Despite this there are numerous hazards that disrupt or damage these systems. Risks such as extreme weather conditions, terrorist threats, landsliders or earthquakes are difficult to predict, manage and mitigate. One of the hazards for transportation systems are accidents, and their impact on the transport functioning...
-
Badania systemów powstrzymujących pojazd przed wypadnięciem z drogi - cz. II
PublicationW artykule zaprezentowana została tematyka systemów powstrzymujących pojazd przed wypadnięciem z drogi. Podczas codziennego użytkowania dróg występuje szereg zagrożeń, które wpływają na bezpieczeństwo. Badanie, identyfikacja i klasyfikacja zagrożeń stanowią istotny element utrzymania dróg. Artykuł stanowi drugą część podjętej problematyki. Pierwsza została opublikowana w magazynie Mosty nr 3-4/19 str. 66-68.
-
Diagnostics and monitoring of the longest span extradosed bridge in Europe
PublicationThe article presents complex diagnostic procedures applied for the purpose of behavior analysis of the extradosed bridge with the longest span in Europe that was built in 2018 in Poland. The system of health monitoring was used to: register internal forces in temporary supports, monitor concrete bonding, perform in situ diagnostics and operation tests. The bridge is a continuous four-span structure with spans theoretical lengths...
-
Opinia techniczna dotycząca oceny kierunku dzxiałań ratunkowych w Bazylice pw. Świętego Mikołaja zlokalizowanej w Gdańsku przy ulicy Świętojańskiej 72 w aspekcie zdarzenia losowego polegającego na uszkodzeniu sklepień południowej nawy bocznej
PublicationW opracowanej Opinii technicznej przeprwadzono Analizę poprawności działań inżynierskich prowadzonych w celu ograniczenia możliwości wystąpienia katastrofy budowlanej w obszarze Bazyliki pw. Świętego Mikołaja w Gdańsku
-
Measurements of displacement and acceleration of the railway bridge at km 333-254 of the Vilnius - Klaipeda railway line
PublicationThe purpose of this work is to perform a report of static and dynamic test realized on the bridge at km 333-254 of the Vilnius - Klaipeda railway line over the Salantas River in Kūlupėnų.
-
RMS-based damage detection in reinforced concrete beams: numerical simulations
PublicationImage-based damage detection methods using guided waves are well known and widely applied approaches in structural diagnostics. They are usually utilized in detection of surface damages or defects of plate-like structures. The article presents results of the study of applicability of imaging wave-based methods in detection in miniscule internal damage in the form of debonding. The investigations were carried out on numerical models...
-
On Surface Kinetic Constitutive Relations
PublicationIn the framework of the strain gradient surface elasticity we discuss a consistent form of surface kinetic energy. This kinetic constitutive equation completes the statement of initial–boundary value problems. The proposed surface kinetic energy density is the most general function consistent with the constitutive relations in bulk. As the surface strain energy depends on the surface deformation gradient and its gradient, the kinetic...
-
BEHAVIOR OF REINFORCED CONCRETE BEAMS CONTAINING LIGHTWEIGHT AGGREGATE IN THE TENSILE ZONE
Publication.
-
Between Descriptive Geometry and CAD 3D
PublicationDescriptive geometry provides methods to analyse three-dimensional space through two-dimensional drawings and prepares to create technical documentation. Geometric form of an engineering project is presented by the means of projection methods based on a 3D model, which is present in designer’s imagination. The forthcoming era of Building Information Modelling (BIM) brings changes in the way the engineer works, as the vision is...
-
Modeling BIM Objects From Point Clouds. Examples
PublicationThe article presents several ways to obtain BIM (Building Information Modeling) models from point clouds using standard commands in Revit 2018. In Revit geometric forms are possible to obtain in project, family or conceptual environments. Efficient modeling requires knowledge of methods of creating families and components in these environments and ways to combine them. Modeling methods with system and loadable families are presented,...
-
LS-DYNA simulations of the impacts of a 38-ton Heavy Goods Vehicle into a road cable barrier
PublicationNowadays, more and more attention is being paid to safety on roads and motorways. It is due to the continuous development of road and motorway network and a significant increase of the number of vehicles on roads. To meet the expectations of improving road safety in Poland, the Road Innovations Development (RID) research programme was implemented in 2016. The aim of the RID 3A - Road Safety Equipment (RoSE) project is a comprehensive...
-
Harmonic Vibrations of Nanosized Magnetoelectric Bodies with Coupled Surface and Interphase Effects: Mathematical Models and Finite Element Approaches
PublicationThe harmonic problems for piezomagnetoelectric nanosized bodies with taking into account the coupled damping and surface effects are considered on the base of the generalized Gurtin-Murdoch model. In the development of previous investigations, the coupled mechanical, electric and magnetic surface effects with surface inertial terms are introduced into the model. For a homogeneous model, the composite material is considered as homogeneous...
-
Elektrownia Ostrołęka C w budowie a „momentum-FSI”
PublicationMimo przeszkód, trwa budowa elektrowni Ostrołęka C. O tym zapewniają nas główni decydenci – Jarosław Małkowski, Prezes Elektrowni Ostrołęka, czy Sławomir Żygowski, Prezes GE Power, firmy odpowiedzialnej projekt, wykonanie i budowę. Możemy o tym dowiedzieć się w mediach społecznościowych. Ale te same media informują również, że 31 lipca 2019 r. Sąd okręgowy w Poznaniu stwierdził nieważność uchwały Walnego Zebrania Akcjonariuszy...
-
Production of self-compacting concrete using limestone powder
PublicationAlthough there are visible signs of its gradual acceptance in North Africa through its limited use in construction, Libya has yet to explore the feasibility and applicability of self-compacting concrete (SCC) in new construction. The current study revolves around SCC made of locally available materials and the harsh environmental conditions. This paper deals with the investigation into the effect of the water to powder ratio and...
-
Maksymalna elastyczność pracy bloków parowych
PublicationW artykule przedstawiono propozycję przyspieszenia startów turbiny parowej poprzez właściwe doprowadzanie pary w trakcie stanów niestacjonarnych. Badano najbardziej wytężone miejsca w urządzeniu, przy uwzględnieniu tradycyjnej hipotezy Hubera-Missesa-Hencky, jak i hipotezy Burzyńskiego. W przypadku licznych startów coraz większe znaczenie odgrywają naprężenia termiczne, dla których najważniejsze są składowe normalne naprężeń, w...
-
Self-compacting grout to produce two-stage concrete
PublicationTraditional concrete (TC) is primarily composed of a mixture of cement, fine and coarse aggregates, and water. TC is made by mixing together all the components before placing them. Using non-traditional concrete (two-stage concrete) to solve and to eliminate the problem of the aggregate segregation which appears in TC and in the self-compacting concrete. Two-stage concrete (TSC) consists of two main components, namely the grout...
-
Estimation of wind pressure acting on the new palm house in Gdansk
PublicationThis paper deals with the problem of numerical simulations of wind loads acting on a Palm House with complex geometry. Flow simulations with aid of computational fluid dynamics procedures have been performed to check if the pressure distributions for the structure are greater than those calculated using the standard design codes with assumption that the Palm House horizontal cross sections are described by smooth cylinders.
-
Improvement of the load capacity of the road overpass as a result of repairs after breakage caused by vehicle impacts
PublicationDamage of spans of the overpass caused by impact of underpassing vehicles are a frequent case. Objects that use prefabricated load-bearing elements that are not designed for such impacts are particularly exposed. After impact, such parts suffer extensive damage that need repair. Taking advantages of this recovery actions it is worth to perform strengthening that will protect object against possible future impacts. In this study...
-
NUMERICAL ANALYSIS OF SPECIES DIFFUSION AND METHANOL DECOMPOSITION IN THERMOCATALYTIC REACTOR BASED ON THE INTERMETALLIC PHASE OF Ni3Al FOR LOW REYNOLDS NUMBERS
PublicationNumerical modelling of hydrogen production by means of methanol decomposition in a thermocatalytic reactor using corrugated foil made of the Ni3Al intermetallic phase is shown in the paper. Experimental results of the flow analysis of mixtures containing helium and methanol in a thermocatalytic reactor with microchannels were used for the initial calibration of the CFD calculations (calculations based on the Computational Fluid...
-
Możliwości i zasady stosowania hybrydowych urządzeń energochłonnych na przykładzie urządzenia SafeEnd
PublicationOd kilku lat na świecie stosowane są urządzenia energochłonne spełniające rolę poduszki zderzeniowej oraz terminala energochłonnego. Urządzenia te stosowane są do osłony zakończeń barier drogowych oraz osłony obiektów znaj-dujących się w strefie bezpieczeństwa drogi. Przykładem takiego urządzenia jest urządzenie energochłonne U-15a SafeEnd (SE) stosowane od niedawna w Polsce, jednakże niektórzy zarządcy dróg zgłaszają obawy do...
-
Doświadczalne i numeryczne badania propagacji fal elektromagnetycznych w zastosowaniu do diagnostyki konstrukcji żelbetowych i ceglanych metodą georadarową
PublicationNiniejsza praca dotyczy zagadnień propagacji fal elektromagnetycznych z ukierunkowaniem na diagnostykę nieniszczącą obiektów budowlanych. Głównym celem rozprawy było opracowanie procedur umożliwiających efektywniejsze wykorzystywanie metody georadarowej w ocenie stanu konstrukcji żelbetowych i ceglanych. Szczególną uwagę poświecono sposobom identyfikacji prędkości propagacji fali elektromagnetycznej na podstawie anomalii obserwowanych...
-
Tensile validation tests with failure criteria comparison for various GFRP laminates
PublicationThe paper studies the mechanical properties of glass fibre reinforced polymers (GFRP) with various types and orientation of reinforcement. Analyzed specimens manufactured in the infusion process are made of polymer vinyl ester resin reinforced with glass fibres. Several samples were examined containing different plies and various fibres orientation [0, 90] or [+45, –45]. To assess the mechanical parameters of laminates, a series...
-
Evaluation of the potential of Microwave Plasma–Atomic Emission Spectrometry for trace elements leaching assessment from the concrete matrix with sewage sludge ash additives
PublicationThe management of ash generated during the thermal utilization of sewage sludge is a significant environmental problem requiring an effective technological solution. One alternative way to dispose of sewage sludge is to bind it in concrete as a substitute for part of the aggregate. The properties of the C-S-H phase enable effective immobilization of harmful substances that sewage sludge contains. The amount of individual compounds...
-
Finite element modeling of plastic hinges based on ductility demand-capacity method using nonlinear material for dynamic analysis
PublicationThe article discusses modeling plastic hinges in reinforced concrete interme-diate supports using finite elements methods. The ductility demand-capacitymethod was used to determine the geometrical parameters of cross-section plas-ticization zones, their ability to move and rotate, as well as their ductility. Dueto the varied geometry and stiffness of the supports and their nonlinear behav-ior under dynamic load, this method was...
-
Diagnostyka i wyjaśnienie aktualnego stanu 40-letniego wiaduktu kolejowego
PublicationPraca zawiera krótką ocenę stanu technicznego, opis przeprowadzonych badań nieniszczących in-situ oraz wykonanych modeli MES, służących do przeprowadzenia analiz na poziomie globalnym jak i lokalnym. Przedstawiono i omówiono wyniki analiz numerycznych, wykorzystanych do oceny stanu konstrukcji i mających na celu rozwiązanie sformułowanych problemów badawczych. Wykonane obliczenia na poziomie globalnym z uszczegółowieniem w obrębie...
-
A Novel Approach to Fully Nonlinear Mathematical Modeling of Tectonic Plates
PublicationThe motion of the Earth's layers due to internal pressures is simulated in this research with an efficient mathematical model. The Earth, which revolves around its axis of rotation and is under internal pressure, will change the shape and displacement of the internal layers and tectonic plates. Applied mathematical models are based on a new approach to shell theory involving both two and three-dimensional approaches. It is the...
-
Fluid–solid interaction on a thin platelet with high-velocity flow: vibration modelling and experiment
PublicationThe paper concerns the nonlinear behaviour of a thin platelet that is streamlined in an aerodynamic tunnel. The air velocity in the aerodynamic tunnel was at 858.9 km/h or 0.7 Ma (Ma—Mach number is a dimensionless quantity in fluid dynamics representing the ratio of flow velocity past a boundary to the local speed of sound). This experiment was numerically simulated using FSI (fluid–solid interaction) tools, namely the coupling...
-
SOLUTIONS OF THE INTERMEDIATE SUPPORT STRUC- TURES OF THE NORTHERN MARMARA HIGHWAY (ISTAN- BUL’S RING ROAD) IN THE CONTEXT OF SEISMIC ACTIVITY
PublicationIn 2014–2018, as a result of the expansion of the city of Istanbul in Turkey, a project was imple- mented consisting of building a northern ring road, called the Northern Marmara Highway. The concept of the structural design of the ring road’s intermediate supports aims at constructing sup- ports that according to the TURKISH DLH 2008 standard must comply with the design require- ments for the three calculated earthquake insensitivity...
-
A Review of Hyperelastic Constitutive Models for Dielectric Elastomers
PublicationDielectric elastomers are smart materials that are essential components in soft systems and structures. The core element of a dielectric elastomer is soft matter, which is mainly rubber-like and elastomeric. These soft materials show a nonlinear behaviour and have a nonlinear strain-stress curve. The best candidates for modelling the nonlinear behaviour of such materials are hyperelastic strain energy functions. Hyperelastic functions...
-
On the Bending of Multilayered Plates Considering Surface Viscoelasticity
PublicationWe discuss the bending resistance of multilayered plates taking into account surface/interfacial viscoelasticity. Within the linear surface viscoelasticity we introduce the surface/interfacial stresses linearly dependent on the history of surface strains. In order to underline the surface viscoelasticity contribution to the bending response we restrict ourselves to the elastic behaviour in the bulk. Using the correspondence principle...
-
Nonlocal Models of Plates and Shells with Applications in Micro- and Nanomechanics
PublicationNowadays, the use of small-scale structures in micro/nanomachines has become more and more widespread. The most important applications of such small-sized parts are in micro-electro-mechanical systems (MEMS) as well as nano-electro-mechanical systems (NEMS) as actuators, sensors, energy harvesters. For example, nanosensors are nanoscale devices that measure physical quantities and convert these to signals that can be detected and...
-
Experimental study and numerical simulation of the dynamic penetration into dry clay
PublicationTests of dry clay were carried out in a uniaxial stress state using the experimental setup which implements the split Hopkinson pressure bar method. Based on the results of these experiments, the compressive strength of clay was determined as an important element of S.S. Grigoryan’s model of the soil medium. In addition, the parameters of this model are determined from the results of experiments using the modified Kolsky method...
-
A Diagnostic Method Based on Deflection Analysis for Monitoring Post-elastic Response of Beams
PublicationA non-destructive diagnostic method based on deflection analysis for monitoring the post-elastic response of beams was developed, and a diagnostic indicator was proposed. The indicator was defined as the second moment of the normalised curvature function about the mid-span, where the curvature was computed from the normalised deflection function. Elastic reference values of the indicator were computed for simply supported beams...
-
Study of the Resistance to Influence of Aggressive Liquids on Concrete with Lightweight Aggregate
PublicationThe corrosion of the structure of concrete caused by the aggressive external environment is one of the main problems that can reduce the durability of buildings. The paper analyzes the influence of the type of component on selected properties of lightweight concrete (LWC) exposed to aggressive liquids. When lightweight concrete containing porous aggregates is used, the influence of an aggressive environment may be of particular...
-
Wpływ temperatury na zależność pomiędzy wytrzymałością zapraw na ściskanie a ilością wydzielonego ciepła hydratacji
PublicationPomiar szybkości oraz ilości wydzielonego ciepła za pomocą kalorymetru izotermicznego stanowi precyzyjne narzędzie do oceny kinetyki hydratacji kompozytów cementowych: zaczynów, zapraw i betonów. Szereg badań naukowych wskazuje, że ilość wydzielonego ciepła pozostaje w korelacji z wytrzymałością na ściskanie w zależności od czasu dojrzewania. W pracy przedstawiono wyniki badań kalorymetrycznych i wytrzymałościowych zaprawy na bazie...
-
Wybrane metody badań nieniszczących na przykładzie diagnostyki mostowego dźwigara kablobetonowego
PublicationSystemy monitoringu technicznego oraz badania nieniszczące stanowią podstawę nowoczesnej diagnostyki konstrukcji, umożliwiając ocenę aktualnego stanu obiektów budowlanych, a także wykrycie zagrożeń mających wpływ na zachowanie stanu granicznego nośności oraz użytkowalności głównych elementów konstrukcyjnych. Możliwość przeprowadzenia pomiarów in situ, niejednokrotnie wspieranych zaawansowanymi analizami numerycznymi, wprowadza...
-
Using the ultrasonic tomography method to study the condition of wooden beams from historical buildngs
PublicationThe need to evaluate the integrity of wooden structural elements is constantly increasing. Non-destructive methods are becoming more popular in this field of research. One type of non-destructive testing is the ultrasonic imaging method, which allows the analysis of internal wood structures without disturbing their state and integrity. In this study, we are interested in assessing the effect of wood condition on the ultrasound...
-
On forced vibrations of piezo-flexomagnetic nano-actuator beams
PublicationThe effect of excitation frequency on the piezomagnetic Euler-Bernoulli nanobeam taking the flexomagnetic material phenomenon into consideration is investigated in this chapter. The magnetization with strain gradients creates flexomagneticity. We couple simultaneously the piezomagnetic and flexomagnetic properties in an inverse magnetization. Resemble the flexoelectricity, the flexomagneticity is also size-dependent. So, it has...
-
On solvability of initial boundary-value problems of micropolar elastic shells with rigid inclusions
PublicationThe problem of dynamics of a linear micropolar shell with a finite set of rigid inclusions is considered. The equations of motion consist of the system of partial differential equations (PDEs) describing small deformations of an elastic shell and ordinary differential equations (ODEs) describing the motions of inclusions. Few types of the contact of the shell with inclusions are considered. The weak setup of the problem is formulated...
-
Testing of the longest span soil-steel bridge in Europe – new quality in measurements
PublicationThe article describes interdisciplinary and comprehensive diagnostic tests of final bridge inspection and acceptance proposed for a soil – steel bridge made of corrugated sheets, being the European span length record holder (25.74 m). As an effect of an original concept a detailed and precise information about the structure response was collected. The load test design was based on the nonlinear numerical simulations performed by...
-
Laplace domain BEM for anisotropic transient elastodynamics
PublicationIn this paper, we describe Laplace domain boundary element method (BEM) for transient dynamic problems of three-dimensional finite homogeneous anisotropic linearly elastic solids. The employed boundary integral equations for displacements are regularized using the static traction fundamental solution. Modified integral expressions for the dynamic parts of anisotropic fundamental solutions and their first derivatives are obtained....
-
Experimental study on the effect of selected sterilization methods on mechanical properties of polylactide FFF specimens
PublicationPurpose: Biodegradable polymers are widely used in personalized medical devices or scaffolds for tissue engineering. The manufacturing process should be finished with sterilization procedure. However, it is not clear how the different sterilization methods have an impact on the mechanical strength of the three-dimensional (3D)-printed parts, such as bone models or personalized mechanical devices. This paper aims to present the...
-
The Digital Tissue and Cell Atlas and the Virtual Microscope
PublicationWith the cooperation of the CI TASK (Center of lnformatics Tri-Citry Academic Supercomputer and network) and the Gdańsk University of Technology, the Medical University of Gdańsk undertook the creation of the Digital Tissue and Cell Atlas and the Virtual Microscope for the needs of the Bridge of Data project. In the beginning, an extensive collection of histological and cytological slides was carefully selected and prepared by...
-
Optymalizacja procesów prefabrykacyjnych przyszłością branży budowlanej
PublicationIntensywny rozwój technologiczny w zakładach prefabrykacji będzie miał wpływ na: krótszy czas wznoszenia obiektów; lepszą jakość końcową obiektów uzyskiwaną dzięki wprowadzeniu automatyzacji linii produkcyjnych w zakładach prefabrykacji; ochronę środowiska przez lepsze zarządzanie surowcami; wprowadzanie nowych rozwiązań technologicznych pozwalających na produkcję m.in. smuklejszych elementów, przez co możliwe będzie uzyskanie większej...
-
Ekspertyza techniczna dotycząca koncepcji demontażu i ponownego montażu mozaiki Kina Neptun w Gdańsku
PublicationPrzedmiotem ekspertyzy było opracowanie koncepcji demontażu i ponownego montażu mozaiki Kina Neptun znajdującej się na jego zewnętrznej stronie od ulicy Lektykarskiej.
-
Innowacyjny moduł ultradźwiękowy systemu monitoringu technicznego mostu podwieszonego w Rzeszowie
PublicationW artykule przedstawiono system monitoringu technicznego konstrukcji mostu podwieszonego nad rzeką Wisłok. System będzie wyposażony w dodatkowy moduł ultradźwiękowy umożliwiający śledzenie degradacji mechanicznej betonu w pylonie mostu. Wczesne wykrywanie stref mikropęknięć, przed pojawieniem się widocznych rys, umożliwia monitorowanie amplitud propagującej fali ultradźwiękowej oraz analizę sygnałów w dziedzinie częstotliwości.
-
Analiza możliwości oceny stanu technicznego kotew gruntowych za pomocą propagacji fal prowadzonych
PublicationW pracy przedstawiono identyfikację długości swobodnej cięgna kotew gruntowych z wykorzystaniem metody propagacji fal prowadzonych. Badania doświadczalne propagacji fal zostały prowadzone dla modeli kotew w skali laboratoryjnej z różnymi długościami buławy.
-
Metoda georadarowa w diagnostyce betonowych obiektów mostowych wzdłuż linii Pomorskiej Kolei Metropolitalnej w Gdańsku
PublicationW pracy przedstawiono badania doświadczalne metodą georadarową betonowych obiektów mostowych wzdłuż nowopowstałej linii Pomorskiej Kolei Metropolitalnej (PKM) w Gdańsku. Przedmiotem badań był wiadukt drogowy, ramowo łukowa oraz ramowa kładka dla pieszych. Pomiary wykonano za pomocą zestawu georadarowego Alladin z anteną o częstotliwości emitowanej fali równej 2 GHz. W artykule opisano także podstawy teoretyczne metody georadarowej...
-
Wpływ konfiguracji czujników w zagadnieniu detekcji uszkodzeń
PublicationW artykule przedstawiono algorytm detekcji uszkodzeń punktowych w elementach 2D z wykorzystaniem fal Lamba, które propagują w płytach o grubości porównywalnej do długości fali. Przedstawiono wyniki obliczeń numerycznych dotyczących lokalizacji uszkodzenia w płycie stalowej. Omówiono wpływ liczby czujników i ich konfigurację na jednoznaczność uzyskanego rozwiązania w postaci położenia uszkodzenia.
-
wyKOMBinuj mOst 2015 – studencki konkurs mostów z papieru
PublicationW artykule przedstawiono relację z ósmej edycji ogólnopolskiego konkursu konstruktorskiego wykombinuj mOst organizowanego na Wydziale Inżynierii Lądowej i Środowiska Politechniki Gdańskiej.
-
Kompozytowy most pieszo-rowerowy w kampusie Politechniki Gdańskiej – badania doświadczalne
PublicationW artykule przedstawiono wybrane badania doświadczalne kompozytowej kładki dla pieszych. Badaniu poddano zarówno segment walidacyjny będący wycinkiem pełnowymiarowe konstrukcji, jak również dźwigar o docelowej długości. Wykonano badania w zakresie obciążeń statycznych, jak również identyfikację parametrów dynamicznych z zastosowaniem testu wzbudzenia impulsowego.
-
Konkurs budowy mostów z papieru – wyKOMBinuj mOst 2015
PublicationW artykule opisano konkurs budowy mostów z papieru wyKOMBinuj mOst 2015 organizowany przez Koło Naukowe Mechaniki Budowli KOMBO działające na Wydziale Inżynierii Lądowej i Środowiska. Była to już ósma edycja tego ogólnopolskiego konkursu pod honorowym patronatem Jego Magnificencji Rektora Politechniki Gdańskiej, Dziekana Wydziału Inżynierii Lądowej i Środowiska, Prezydenta Miasta Gdańska, Akademii Młodych Uczonych PAN, Związku...
-
Metody diagnostyki ultradźwiękowej i ich zastosowania w betonowych obiektach mostowych
PublicationCelem pracy jest przedstawienie zalet metod diagnostyki ultradźwiękowej zastosowanych do oceny stanu technicznego betonowych elementów w konstrukcjach obiektów mostowych. W artkule została omówiona metoda przepuszczania, która wymaga obustronnego dostępu do badanego elementu oraz metoda młoteczkowa, w której badania są realizowane przy założeniu ograniczenia dostępu do elementu tylko do jednej jego strony. Realizacje badań diagnostycznych...
-
Der betonschutz vor der Wirkung der aggressiven Umgebung
PublicationPraca dotyczy zabezpieczenia powierzchni betonowych przed wnikaniem oleju, wody, roztworów soli. W pracy przedstawiono podstawy teoretyczne transportu cieczy, ruch cieczy w kapilarach.
-
On the paradox of torsional buckling of thin-walled I columns
PublicationAnaliza wyboczenia skrętnego pręta cienkościennego o dwuteowym przekroju poprzecznym ze zmienną, w pewnych granicach, szerokością półek wykazała, że siła krytyczna wyboczenia skrętnego może przekraczać granice wyznaczone przez siły odpowiadające prętom o stałych ekstremalnych szerokościach półek. Ten paradoksalny wynik uzyskano w ramach teorii prętów cienkościennch o przekroju nieodkształcalnym. Ponadto wykazano, że punkt bifurkacji...
-
Simple model of rain wind induced vibrations of stayed cables.
PublicationAnalizowano prosty, liniowy model drgań kabli mostów wantowych pod obciążeniem wiatrem i deszczem. Zakłada się, iż częstotliwość ruchu górnej kropli po powierzchni kabla i częstotliwość kabla są równe oraz iż amplituda ruchu kropli dla danej prędkości wiatru są stałe. Otrzymane rezultaty są porównane z istniejącymi w literaturze wynikami badań eksperymentalnych. Podaje się analityczne związki służące do oszacowania tłumienia...
-
Modelowanie drgań kabli wywołanych działaniem wiatru i deszczu
PublicationW referacie zaproponowano prosty, liniowy model drgań kabli mostów wantowych obciążonych wiatrem i deszczem. Założono, iż częstotliwość ruchu górnej kropli po powierzchni kabla i częstotliwość kabla są równe oraz iż amplituda ruchu kropli dla danej prędkości wiatru są stałe. Otrzymane rezultaty porównano z istniejącymi w literaturze wynikami badań eksperymentalnych. Podano analityczne związki służące do oszacowania tłumienia aerodynamicznego...
-
Eigenschaften der selbstverdichtenden Betone mit zerstreuter Bewehrung.
PublicationReferat dotyczy badania wpływu różnych domieszek upłynniających i dodatków(mikrowypełniaczy oraz włókna stalowego i polipropylenowego) na właściwości mieszanki betonowej samozagęszczalnej jaki na parametry betonu stwardniałego. Badania prowadzono w dwóch etapach. W etapie I opracowano receptury kilku mieszanek samozagęszczalnych bez dodatku włókien. W etapie II na mieszankach wytypowanych w etapie I po dodaniu różnych ilości...
-
Flatter jednoprzęsłowej wiszącej kładki dla pieszych
PublicationPrzedstawiono analizę aerodynamiczną stateczności wybranego typu wiszącej kładki dla pieszych z uwzględnieniem zjawiska flatteru i dywergencji.
-
Crack identification in cantilever beam using wavelets
PublicationPrzedstawiono metodę identyfikacji zniszczeń przy użyciu transformacji falkowej. Rozpatrzono przykład belki wspornikowej. Pokazano, że transformacja falkowa wykrywa miejsce zniszczenia.
-
Ausgewahlten Warme und Feuchtigkeits probleme von Industriefussboden.
PublicationWiele obiektów budowlanych, jak hale przemysłowe, magazyny, warsztaty, hangary, sklepy, supermarkety itp. wyposażonych jest w posadzkę ułożoną bezpośrednio na gruncie. Rola, jaką pełni najniżej położona w tych obiektach posadzka podlega takim samym prawom fizyki budowli jak i mechaniki, tak jak każdy inny znaczący element konstrukcyjny obiektu. Oczywiście nie można jej rozpatrywać w aspekcie elementu wydzielonego z pewnej całości,...
-
Kompozyty cementowo-popiołowe modyfikowane dodatkiem włókien stalowych.
PublicationPraca dotyczy określenia wpływu niewielkiej ilości włókien stalowych na właściwości techniczne kompozytów popiołowo-cementowych. W opracowaniu przedstawiono wyniki badań kompozytów w zakresie zmian wytrzymałości na rozciąganie przy zginaniu, zmian wytrzymałości na rozciąganie przy rozłupywaniu, zmian wytrzymałości na ściskanie.
-
Zagadnienia termiczno-wytrzymałościowe przy projektowaniu i eksploatacji posadzek na gruncie.
PublicationNa podstawie wyników obliczeń przeprowadzonych dla przykładów można stwierdzić, że nawet mała różnica temperatury na grubości podkładu może doprowadzić do sporych deformacji oraz zarysowań wskutek około 5-krotnego przyrostu wielkości naprężeń wewnętrznych. Przedstawiono obliczenia cieplne posadzek na gruncie, zagadnienia wytrzymałościowe, wybrane zagadnienia z wykonawstwa.
-
Podłogi na gruncie.
PublicationRola podłogi na gruncie będącej jednym z bardziej odpowiedzialnych ustrojów każdego obiektu budowlanego jest niejednokrotnie lekceważona, a nawet pomijana już na etapie jego projektowania.W artykule przedstawiono wymagania stawiane podłogom, zagadnienia wytrzymałościowe i zasady konstruowania podłóg na podłożu gruntowym oraz obliczenia cieplne podłóg na gruncie.
-
Modelowanie testów dynamicznych skokiem z progu wykonanych na moście wantowym w ciągu ulicy Sucharskiego w Gdańsku.
PublicationPrzedstawiono numeryczne symulacje testu dynamicznego przeprowadzonego na podwieszonym moście w ciągu Trasy Sucharskiego w Gdańsku. Drgania mostu wywołane były skokiem przedniej osi samochodu TATRA z progu o wysokości 7 cm. Samochód modelowano jako układ o dwóch stopniach swobody dla którego parametry określono na podstawie pomiarów dwoma akcelerometrami umiejscowionymi na przedniej masce i osi samochodu. przestrzenny model...
-
3-węzłowy płaski element powłokowy z 6 stopniem swobody
PublicationPraca dotyczy zastosowania płaskiego trójkątnego (trójwęzłowego) elementu powłokowego w analizie powłok w zakresie nieliniowym geometrycznie. Użyte elementy otrzymano poprzez połączenie elementów wyprowadzonych dla stanu membranowego i zgięciowego.
-
On mechanics of piezocomposite shell structures
PublicationThis study presents an original and novel investigation into the mechanics of piezo-flexo-magneto-elastic nanocomposite doubly-curved shells (PFMDCSs) and the ability to detect the lower and higher levels of electro-magnetic fields. In this context, by utilizing the first-order shear deformation shell model, stresses and strains are acquired. By imposing Hamilton's principle and the von Kármán approach, the governing equations...
-
On rotary inertia of microstuctured beams and variations thereof
PublicationWe discuss the classic rotary inertia notion and extend it for microstructured beams introducing new microinertia parameters as an additional dynamic response to microstructure changes. Slender structures made of beam- or platelet-lattice metamaterials may exhibit not only large translations and rotations but also general deformations of inner structure. Here we considered a few examples of beam-like structures and derive their...
-
Novel Tools for Comprehensive Functional Analysis of LDLR (Low-Density Lipoprotein Receptor) Variants
PublicationFamilial hypercholesterolemia (FH) is an autosomal-dominant disorder caused mainly by substitutions in the low-density lipoprotein receptor (LDLR) gene, leading to an increased risk of premature cardiovascular diseases. Tremendous advances in sequencing techniques have resulted in the discovery of more than 3000 variants of the LDLR gene, but not all of them are clinically relevant. Therefore, functional studies of selected variants...
-
Nanoparticle Tracking Analysis of Urinary Extracellular Vesicle Proteins as a New Challenge in Laboratory Medicine
PublicationUrinary extracellular vesicle (uEV) proteins may be used as specific markers of kidney damage in various pathophysiological conditions. The nanoparticle-tracking analysis (NTA) appears to be the most useful method for the analysis of uEVs due to its ability to analyze particles below 300 nm. The NTA method has been used to measure the size and concentration of uEVs and also allows for a deeper analysis of uEVs based on their protein...
-
M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions
PublicationThe path-independent M-integral plays an important role in analysis of solids with inhomogeneities. However, the available applications are almost limited to linear-elastic or physically non-linear power law type materials under the assumption of infinitesimal strains. In this paper we formulate the M-integral for a class of hyperelastic solids undergoing finite anti-plane shear deformation. As an application we consider the problem...
-
In Vitro and In Vivo Imaging-Based Evaluation of Doxorubicin Anticancer Treatment in Combination with the Herbal Medicine Black Cohosh
PublicationAs a substitution for hormone replacement therapy, many breast cancer patients use black cohosh (BC) extracts in combination with doxorubicin (DOX)-based chemotherapy. In this study, we evaluated the viability and survival of BC- and DOX-treated MCF-7 cells. A preclinical model of MCF-7 xenografts was used to determine the influence of BC and DOX administration on tumor growth and metabolism. The number of apoptotic cells after...
-
Damage of a post-tensioned concrete bridge – Unwanted cracks of the girders
PublicationThe cracking of a post-tensioned T-beam superstructure, which was built using the incremental launching method, is analyzed in the paper. The problem is studied in detail, as specific damage was observed in the form of longitudinal cracks, especially in the mid-height zone of the girder at the interface of two assembly sections. The paper is a case study. A detailed inspection is done and non-destructive testing results of the...
-
Numerical Analysis of Mice Carotid Arteries’ Response Emphasizing the Importance of Material Law Constants’ Validation
PublicationIn this paper, a detailed validation of the passive material properties of mice carotid arteries and constants of the Fung and Holzapfel hyperelastic material laws is conducted by means of static nonlinear FEM analyses. The response of the carotid arteries in an inflation test is studied here for the following mouse models: wild-type, mdx, sgcd−/−, Eln+/+, Eln+/−, Fbln5+/+, and Fbln5−/−. All FEM computations are conducted on models...
-
Badania mostu III Tysiąclecia im. Jana Pawła II w ciągu Trasy Sucharskiego w Gdańsku
PublicationW pracy przedstawiono zakres oraz wyniki badań podczas próbnego obciążenia drogowego mostu podwieszonego przez rzekę Martwą Wisłę w Gdańsku. Scharakteryzowano metodę pomiarów (aparaturę pomiarową), omówiono wyniki badań statycznych i dynamicznych oraz przedstawiono podsumowanie i wnioski z badań.
-
Impact response of two-layered grouted aggregate fibrous concretecomposite under falling mass impact
PublicationTwo-layered Grouted Aggregates Fibrous Concrete Composite (TGAFCC) is a new category concrete which became popular recently and attracted the attention of researchers globally. Recent studies indicated that TGAFCC has notable improvement in mechanical properties, which has been sufficiently documented. However, the impact behaviour of TGAFCC when combined with Glass Fibre Mesh (GFM) and Textile Fibre Mesh (TFM) is still unexplored....
-
Special Issue: “Non-Destructive Testing of Structures”
PublicationThe Special Issue “Non-Destructive Testing of Structures” has been proposed to present recent developments in the field of diagnostics of structural materials and components in civil and mechanical engineering. The papers highlighted in this editorial concern various aspects of non-invasive diagnostics, including such topics as condition assessments of civil and mechanical structures and connections of structural elements, the...
-
CONCRETE MIX DESIGN USING SIMPLE EQUATIONS
PublicationThe behaviour of concrete, whether fresh or har dened, depends basically on the beha viour of its components and the r elationship between them, ther efore, obtaining a concr ete with cer tain pr operties depends fundamentally on the concr ete mix design. Concr ete mix design gener ally includes two main steps: 1-Selection of the main components suitable for the concr...
-
Textile reinforced concrete members subjected to tension, bending, and in-plane loads: Experimental study and numerical analyses
PublicationTextile reinforced concrete has raised increasing research interest during the last years, mainly due to its potential to be used for freeform shell structures involving complex load situations. Yet, most experimental work has focused on test setups with primarily uniaxial loading. In the current work, such setups are complemented with a novel test setup of deep beams, including in-plane bending and shear. Further, nonlinear finite...
-
Proximal fibular osteotomy as a treatment for degenerative meniscal extrusion
PublicationMeniscal extrusion treatment is a key focus area for research and clinical study of degenerative knee pathology. The contact forces between the meniscus and the bones cause external displacements of the meniscus that are resisted by the circumferential fibres. The main risk factors for the excessive deformation of the meniscus are meniscal root tears, disruption of the circumferential fibres, knee malalignment and high body mass...
-
Can we really solve an arch stability problem?
PublicationWe bring attention to the problem of solving nonlinear boundary-value problems for elastic structures such as arches and shells. Here we discuss a classical problem of a shear-deformable arch postbuckling. Considering a postbuckling behaviour of a circular arch we discuss the possibility to find numerically a solution for highly nonlinear regimes. The main attention is paid to the problem of determination of all solutions. The...
-
Butyrylcholinesterase signal sequence self-aggregates and enhances amyloid fibril formation in vitro
PublicationAlzheimer’s disease (AD) pathogenesis has been attributed to extracellular aggregates of amyloid β (Aβ) plaques and neurofibrillary tangles in the human brain. It has been reported that butyrylcholinesterase (BChE) also accumulates in the brain Aβ plaques in AD. We have previously found that the BChE substitution in 5′UTR caused an in-frame N-terminal extension of 41 amino acids of the BChE signal peptide. The resultant variant...
-
Numerical analysis of lumbar spine injury during road safety barrier collision
PublicationPurpose: Enhancing road safety is a critical goal worldwide, necessitating the development of clear standards for road safety systems. This study focuses on lumbar spine (L-spine) compression injuries during collisions with concrete road safety barriers (RSBs). It aims to analyze internal forces during impact to understand L-spine injury biomechanics in such accidents. Methods: The research included a literature review, analyzing...
-
Mechanical response of human thoracic spine ligaments under quasi-static loading: An experimental study
PublicationPurpose This study aimed to investigate the geometrical and mechanical properties of human thoracic spine ligaments subjected to uniaxial quasi-static tensile test. Methods Four human thoracic spines, obtained through a body donation program, were utilized for the study. The anterior longitudinal ligament (ALL), posterior longitudinal ligament (PLL), capsular ligament (CL), ligamenta flava (LF), and the interspinous ligament and...
-
Pharmacomicrobiomics of cell-cycle specific anti-cancer drugs – is it a new perspective for personalized treatment of cancer patients?
PublicationIntestinal bacteria are equipped with an enzyme apparatus that is involved in the active biotrans-formation of xenobiotics, including drugs. Pharmacomicrobiomics, a new area of pharmacology, analyses interactions between bacteria and xenobiotics. However, there is another side to the coin. Pharmacotherapeutic agents can significantly modify the microbiota, which consequently affects their efficacy. In this review, we comprehensively...
-
RAGE as a Novel Biomarker for Prostate Cancer: A Systematic Review and Meta-Analysis
PublicationThe receptor for advanced glycation end-products (RAGE) has been implicated in driving prostate cancer (PCa) growth, aggression, and metastasis through the fueling of chronic inflammation in the tumor microenvironment. This systematic review and meta-analysis summarizes and analyzes the current clinical and preclinical data to provide insight into the relationships among RAGE levels and PCa, cancer grade, and molecular effects....
-
Methodology of generation of CFD meshes and 4D shape reconstruction of coronary arteries from patient-specific dynamic CT
PublicationDue to the difficulties in retrieving both the time‑dependent shapes of the vessels and the generation of numerical meshes for such cases, most of the simulations of blood flow in the cardiac arteries use static geometry. The article describes a methodology for generating a sequence of time‑dependent 3D shapes based on images of different resolutions and qualities acquired from ECG‑gated coronary artery CT angiography. The precision...
-
Non-destructive Diagnostics of the Floor in the Gdańsk Crane Using Ground Penetrating Radar = Diagnostyka nieniszcząca posadzki w gdańskim Żurawiu z zastosowaniem metody georadarowej
PublicationThis paper presents the results of a ground penetrating radar (GPR) survey carried out at the Crane in Gdańsk. The measurements were conducted on the floor of the southern and northern towers. The aim of the experiment is to assess the possibility of detecting anomalies beneath the floor. The surveys were carried out in a non-destructive manner, using a georadar unit with 2 GHz and 400/900 MHz antennas. This paper compares the...
-
Protein overproduction alters exosome secretion in Chinese hamster ovary cells
PublicationDespite the abundance of available cell lines, nearly 70% of all recombinant therapeutic proteins today are produced in Chi-nese hamster ovary (CHO) cells. The impact of protein overproduction on the secretion of exosomes by CHO cells has been investigated here. Increased secretion of extracellular vesicles (EVs) by protein overexpressing CHO cells was demonstrated with protein content assay, nanoparticle tracking analysis, and...
-
Coda wave interferometry in monitoring the fracture process of concrete beams under bending test
PublicationEarly detection of damage is necessary for the safe and reliable use of civil engineering structures made of concrete. Recently, the identification of micro-cracks in concrete has become an area of growing interest, especially using wave-based techniques. In this paper, a non-destructive testing approach for the characterization of the fracture process was presented. Experimental tests were made on concrete beams subjected to mechanical...
-
Odpowiedź na Kilka uwag do artykułu nt. Mostu Uniwersyteckiego w Bydgoszczy
PublicationW materiale zawarto odpowiedź do artykułu "Kilka uwag do artykułu nt. Mostu Uniwersyteckiego w Bydgoszczy" opublikowanego w ne 1/2023 czasopisma "Mosty" na str. 8.
-
Badania nieniszczące mostu jako podstawa do oceny jego stanu na potrzeby realizacji przejazdu ponadnormatywnego
PublicationZagadnieniami związanymi z analizą możliwości realizacji przejazdów ponadnormatywnych przez obiekty mostowe zajmują się zespoły inżynierskie i naukowe na całym świecie. Wiele z analiz udaje się wykonać przy użyciu standardowych i typowych metod. Jest jednak grupa obiektów, dla których wymagane jest podejście indywidualne. Dla nich dopiero zaprojektowanie i zrealizowanie indywidualnie dobranego planu badawczego jest jedyną możliwością...
-
Przegląd aplikacji zużytych łopat turbin wiatrowych na potrzeby budownictwa infrastrukturalnego
PublicationArtykuł zawiera przedstawienie aktualnego stanu wiedzy na temat recyklingu i ponownego użycia łopat wirników turbin wiatrowych na potrzeby budownictwa infrastrukturalnego. Poruszana problematyka stała się w ostatnim czasie bardzo istotna, a prognozy i statystyki pokazują, że najbliższe lata, będące jednocześnie okresem intensywnego rozwoju energetyki wiatrowej, będą jeszcze bardziej niż kiedykolwiek wymagały opracowania metody...