Wyszukiwarka
Filtry
wszystkich: 461
-
Katalog
Wyniki wyszukiwania dla: standards
-
Integrated production technology of cylindrical surfaces by turning and burnishing
PublikacjaThe method is based on a combination of previously used two separate operations namely machining and burnishing in a one complex operation implemented on a lathe.In the case of machining shafts and hydraulic cylinders of steel C45 is possible to obtain a surface roughness Ra=0,16 - 0,32 micrometers, dimensional accuracy class 7-8 according to ISO standards, and increase in the hardness of the surface up to 40%.
-
Cross-layer mDNS/ARP integration for IEEE 802.11s Wireless mesh Network
PublikacjaPopularization of mobile computing devices created a need for robust, efficient and ubiquitous methods of communication and network access. At the same time, evolution and standardization of Wireless Local Area Network (WLAN) technologies made them an attractive solution for building of complex network systems. Moreover, growing maturity of WLAN standards such as IEEE 802.11 allows for introduction of WLAN architectures other than...
-
Human Factors in designing the Instrumentation and Control Systems Important to Safety
PublikacjaThis work addresses selected aspects of human factors in designing the instrumentation and control (I&C) systems important to safety as a part of the functional safety management of industrial hazardous plants, in particular nuclear power plants. As it is known in such plants a concept of “defence in depth” (D-in-D) is widely applied and some layers of protection are designed with regard to functional safety (FS) concept given...
-
Impact of thermal backfill parameters on current-carrying capacity of power cables installed in the ground
PublikacjaProper design of power installations with the participation of power cables buried in homogeneous and thermally well-conductive ground does not constitute a major problem. The situation changes when the ground is non-homogeneous and thermally low-conductive. In such a situation, a thermal backfill near the cables is commonly used. The optimization of thermal backfill parameters to achieve the highest possible current-carrying capacity...
-
Opracowanie i atestacja nowych typów materiałów odniesienia niezbędnych do uzyskania akredytacji europejskiej przez polskie laboratoria zajmujące się analityką przemysłową
ProjektyProjekt realizowany w Wydział Chemiczny zgodnie z porozumieniem INNOTECH-K1/IN1/43/158947/NCBR/12 z dnia 2012-05-30
-
Trunked Radio Solutions for Special Application
PublikacjaIn the paper modern concepts of radio communication trunking-dispatch systems for special applications are presented. Basic standards of TETRA, DMR, and cdma2000 are mentioned. The aim of the paper is to present innovative trunking solutions based on the LTE system working both in FDD and TDD mode. The architecture of LTE trunked radio is shown as well as new services possible to implementation are described. The way of TETRA and...
-
ON ESTIMATION OF OCCUPANT SAFETY IN VEHICULAR CRASHES INTO ROADSIDE OBSTACLES USING NON-LINEAR DYNAMIC ANALYSIS
PublikacjaThe article describes a comparison of two general methods of occupants safety estimation based on a numerical examples. The so-called direct method is mainly based on the Head Injury Criterion of a crash test dummy in a vehicle with passive safety system while the indirect method uses a European standards approach to estimate impact severity level. Numerical simulations in LS-DYNA have been conducted.
-
Residual current devices in installations with PV energy sources
PublikacjaThe paper presents the principles of residual current devices (RCDs) application in photovoltaic (PV) installations. Provisions of standards in this regard are commented on, in particular, attention is drawn to the lack of obligation to use of RCDs in PV installations. The issue of the shape of the earth fault current and the level of leakage currents in such installations are discussed. These factors influence the selection of...
-
SUSHI - jak to ugryźć? Czyli o standaryzacji i gromadzeniu statystyk wykorzystania zasobów elektronicznych na przykładzie Biblioteki Głównej Gdańskiego Uniwersytetu Medycznego
PublikacjaStatystyki wykorzystania dostarczają bibliotekarzom informacji niezbędnych przy podejmowaniu decyzji o zakupie dostępu do wybranych zasobów elektronicznych. W roku 2002 rozpoczął działalność międzynaro- dowy projekt COUNTER (Counting Online Usage of Networked Electronic Resources), którego celem było ujednolicenie raportów wykorzystania e-zasobów, a także uczynienie ich możliwie najbardziej miarodajnymi. W roku 2007 amerykańska...
-
Overview of cooperative communication methods
PublikacjaThe paper presents issues related to the cooperative communication in wireless networks. Cooperative com-munication involves the use of mobile terminals as relay stations to improve the transmission quality, improve network performance and reduce energy consumption. It is also possible to use several different data transmission standards. The paper presents the methods used to implement cooperative communication. The types of cooperative...
-
Critical systems software testing and QA - Spring'24
Kursy OnlineCourse objectives: Present software development standards in the European space industry and techniques of their implementation. Learn how to assess and manage critical system software quality in an IT project. Gain basic hands-on experience in bug tracking and reporting in a software project.
-
Integration, Processing and Dissemination of LiDAR Data in a 3D Web-GIS
PublikacjaThe rapid increase in applications of Light Detection and Ranging (LiDAR) scanners, followed by the development of various methods that are dedicated for survey data processing, visualization, and dissemination constituted the need of new open standards for storage and online distribution of collected three-dimensional data. However, over a decade of research in the area has resulted in a number of incompatible solutions that offer...
-
Creating Polish space language dictionary - lessons learned
PublikacjaPolish space industry suffers from lack of space vocabulary. Since joining European Space Agency in 2012, the sector has expanded rapidly now employing over 1000 specialists focusing mainly on space sustainability, space debris detection and tracking, robotics and propulsion systems. The Polish Space Agency together with The Polish Committee for Standardization have committed to creating the first lexicon of space language, along...
-
THE EFFECT OF NOTCH DEPTH ON CTOD VALUES IN FRACTURE TESTS OF STRUCTURAL STEEL ELEMENTS
PublikacjaIn elements of steel structures working at low temperatures, there is a risk of appearance of brittle fracture. This risk is reduced through the use of certified materials having guaranteed strength at a given temperature. A method which is most frequently used to determine brittle fracture toughness is the Charpy impact test, preformed for a given temperature. For offshore structures intended to work in the arctic climat e, the...
-
Current risk analysis and management issues in technical systems.
PublikacjaDealing with the reliability and safety of industrial hazardous plants requires taking into account relevant interdisciplinary scientific knowledge and some existing approaches based on so-called good engineering practice, also those included in the international standards and guidelines. In this article an approach is proposed how to integrate the functional safety concept with information security aspects in the design and management...
-
The conducted immunity test of a power supply unit in the frequency range from 19 MHz to 26 MHz for the RF voltage level of 3 V
Dane BadawczeThe dataset presents a result of measurements that are a part of immunity tests to conducted disturbances, induced by radio-frequency fields. The immunity tests were carried out on the mains cable of the DF1723003TC NDN power supply unit. Tests of immunity of electronic systems to conducted disturbances in the frequency range from 19 MHz to 26 MHz were...
-
The conducted immunity test of a power supply unit in the frequency range from 19 MHz to 26 MHz for the RF voltage level of 1 V
Dane BadawczeThe dataset presents a result of measurements that are a part of immunity tests to conducted disturbances, induced by radio-frequency fields. The immunity tests were carried out on the mains cable of the DF1723003TC NDN power supply unit. Tests of immunity of electronic systems to conducted disturbances in the frequency range from 19 MHz to 26 MHz were...
-
The conducted immunity test of a power supply unit in the frequency range from 19 MHz to 26 MHz for the RF voltage level of 10 V
Dane BadawczeThe dataset presents a result of measurements that are a part of immunity tests to conducted disturbances, induced by radio-frequency fields. The immunity tests were carried out on the mains cable of the DF1723003TC NDN power supply unit. Tests of immunity of electronic systems to conducted disturbances in the frequency range from 19 MHz to 26 MHz were...
-
Jakub Miler dr inż.
OsobyKariera akademicka: 2000: mgr inż. Wydział ETI, Politechnika Gdańska, praca pt. "Computer system for supporting risk management in a software engineering project", promotor prof. Janusz Górski 2005: dr inż. Wydział ETI, Politechnika Gdańska, rozprawa pt. "A Method of Software Project Risk Identification and Analysis", obroniona z wyróżnieniem, dziedzina nauki techniczne, dyscyplina informatyka, promotor prof. Janusz Górski Zainteresowania...
-
Air Pollution: Monitoring
PublikacjaThe entry presents an overview of the issues in the field of air pollution monitoring. At the beginning, the general objectives of air monitoring, ambient air quality standards for so-called criteria pollutants, and their sources are discussed. In the next part, both analytical methods and instruments for monitoring of ambient air and stack gases are briefly presented. Additionally, other approaches used in air pollution monitoring,...
-
Charakterystyka areodynamiczna membranowego przekrycia wiszącego.
PublikacjaArtykuł przedstawia charakterystykę aerodynamiczną membranowego przekrycia wiszącego. Prezentowane są dwie koncepcje przyjmowania wartości współczynnika aerodynamicznego. Pierwsza z koncepcji bazuje bezpośrednio na testach laboratoryjnych druga zaś wykorzystuje uproszczone podejście normowe.This paper presents the aerodynamic characteristics of membrane hanging roof. The two concepts of taking the value of the aerodynamic factor...
-
Cavitation Erosion – Phenomenon and Test Rigs
PublikacjaThe cavitation and cavitation erosion phenomenon have been shortly presented. The main four types of test rigs to investigate the cavitation erosion resistance have been shown. Each type of test design is described and an example of a design is shown. A special attention has been payed to the designs described in the International ASTM Standards: a vibratory design and a cavitating jet cell. There was shown that the design of a...
-
Determining the leakage current resistive component by the orthogonal vector method
PublikacjaThe measurement of the metal – oxide surge arresters (MOSA) leakage current and the analysis of its components is a key diagnostic criterion according to technical standards. During on site MOSA condition assessment, the easy way is based on the measurement only leakage current, without the inconvenient live working measurements of supply voltage. Orthogonal vectors method of determination the resistive leakage current is presented....
-
Przegląd metod oceny struktur przestrzennych w warunkach zrównoważonego rozwoju
Publikacjathe article "the assessment methods' review of urban structures in the sustainable development context" presents various methods along with tools and ways how to apply them. mainly it is based on methods' descriptions contained in bequest programme (building environmental quality evaluation sustainability through time). the assessment should improve formation of the built environment and practical realization of the idea of sustainable...
-
Preface of guest editors
PublikacjaA special issue of Discussiones Mathematice Graph Theory (DMGT) is dedicated to selected papers presented at the 12th Workshop on Graph Theory: Colourings, Independence and Domination (CID) held on 16-21 September 2007 in Karpacz, Poland. It continues a series of international workshops: 1993-1997 in Lubiatów, 1998-2001 in Gronów, 2003 and 2005 in Karpacz. About 70 participants formed the audience of six invited lectures and 68...
-
Establishing Relationships between Parameters of the controlled Compaction Soil by Using Various In-Situ Tests
PublikacjaThe aim of research was evaluating reliable correlations between chosen soil parameters describing state of surface layers of soil. The paper presents site comparative tests based on the light falling weight deflectometer (LFWD), the static plate load tester (VSS), the dynamic probing light tester (DPL) and the bearing ratio tester (CBR in-situ) with relationships between soil state parameters. All featured in-situ...
-
Standardy Profesjonalnego Public Relations
Publikacja" Standardy przedstawiają wartości i pryncypia uzasadniające konieczność dokonywania odpowiednich wyborów. Public relations ma godzić interesy zleceniodawców, przedstawicieli mediów i różnych grup społeczeństwa, a przy tym pozostawać w zgodzie z normami etycznymi i odwoływać się do takich wartości jak szacunek, godność, rzetelność, uczciwość, prawda, wiarygodność, niezależność, lojalność i zaufanie. Opracowanie "Standardów profesjonalnego...
-
Phytochemical screening and biological evaluation of Greek sage (Salvia fruticosa Mill.) extracts
PublikacjaThis study explores the influence of extraction solvents on the composition and bioactivity of Salvia fruticosa extracts. Ultrasound-assisted extraction with water, ethanol and their mixtures in variable proportions was used to produce four different extracts. An untargeted UPLC/MS‑based metabolomics was performed to discover metabolites profile variation between the extracts. In the analyzed samples, 2704 features had been detected,...
-
Digital Transformation of Terrestrial Radio: An Analysis of Simulcasted Broadcasts in FM and DAB+ for a Smart and Successful Switchover
PublikacjaThe process of digitizing radio is far from over. It is an important interdisciplinary aspect, involving Big Data and AI (Artificial Intelligence) when it comes to classifying and handling content, and an organizational challenge in the Industry 4.0 concept. There exist several methods for delivering audio signals, including terrestrial broadcasting and internet streaming. Among them, the DAB+ (Digital Audio Broadcasting plus)...
-
Monitoring Lead Concentration in the Surrounding Environmental Components of a Lead Battery Company: Plants, Air and Effluents—Case Study, Kenya
PublikacjaLead (Pb) pollution from smelters and lead–acid battery has become a serious problem worldwide owing to its toxic nature as a heavy metal. Stricter regulations and monitoring strategies have been formulated, legislated and implemented in various parts of the world on heavy metal usage. Developed countries such as the USA and in Europe largely operate within the set standards, however, developing countries such as Kenya, Nigeria...
-
Nierówności pionowe toru kolejowego
PublikacjaOcena jakości geometrycznej toru kolejowego wymaga od zarządców infrastruktury stosowania jednolitych metod pomiarów, obliczania i interpretacji wyników. W tym zakresie należy stosować się do norm europejskich i technicznych specyfikacje interoperacyjności. W artykule przedstawiono podstawowe zagadnienia związane z pomiarem i oceną nierówności pionowych toru kolejowego. Zapisano odchyłki dopuszczalne nierówności pionowych według...
-
INVESTIGATION INTO INTERFEROMETRIC SONAR SYSTEM ACCURACY
PublikacjaThe results of the accuracy measurements of phase differencing bathymetric sonar (PDBS) system in shallow waters are presented in the article. The measurement results were compared with the theoretical calculations for sonar system accuracy and international standards for hydrographic surveys. The proposed formulas enable to assess a priori sonar system performance using system quality factor (SQF), which takes into account influence...
-
Methods for evaluating rated power of diesel-powered generator set
PublikacjaBasic concepts for evaluating rated power of generator sets powered by combustion engines are presented in this article. A relation between parameters of the engine and the generator are shown. Recommendations contained in the standards and technical literature are systematized. The scheme and methodology for evaluating rated power of the generator set, based on laboratory research, are suggested. Also, the main problems which...
-
Smart Cities Concept - Readiness of City Halls as a Measure of Reaching a Smart City Perception
PublikacjaThe article presents a proposal for a new approach to the assessment of Smart Cities: testing the readiness of city halls to a Smart City. The approach is the result of two-year studies involving ten major city halls. Readiness is compared with the previously used Smart City assessment methods: rankings or ISO standards. The relationship between readiness and organization maturity was also presented. The key role of city halls...
-
A Framework of a Ship Domain-based Collision Alert System
PublikacjaThe paper presents a framework of a planned ship collision alert system. The envisaged system is compliant with IMO Resolution MSC.252 (83) “Adoption of the revised performance standards for Integrated Navigation Systems (INS)”. It is based on a ship domain-oriented approach to collision risk and introduces a policy of alerts on dangerous situations. The alerts will include cautions, warnings and alarms, which will be triggered...
-
Supporting Assurance by Evidence-based Argument Services
PublikacjaStructured arguments based on evidence are used in many domains, including systems engineering, quality assurance and standards conformance. Development, maintenance and assessment of such arguments is addressed by TRUST-IT methodology outlined in this paper. The effective usage of TRUST-IT requires an adequate tool support. We present a platform of software services, called NOR-STA, available in the Internet, supporting key activities...
-
Technical and Economic Analysis of the Implementation of Selected Variants of Road Investment
PublikacjaThe aim of the article is to analyze three variants of modernization and reconstruction of a road intersection, which in practice is the cause of numerous collisions and accidents. Detailed design solutions are presented for them. The aim of the analyses is to indicate an effective solution that, taking into account technical modifications of the road system elements, will ensure the functionality of the road system to the highest...
-
Effect of wet Hydrogen Sulfide on Carbon Steels Degradation in Refinery Based on Case Study
PublikacjaMaterial degradation caused by wet hydrogen sulfide (Wet H2S) is one of the major issues in refineries. Carbon steel is the main construction material used in refineries and is subjected not only to thickness loss but the hydrogen is the major concern. H2S leads to high atomic hydrogen penetration in steel which causes degradation in the form of blistering and/or cracking (HIC/SOHIC) and stress cracking in the area of welds and...
-
Convenient identification of desulfoglucosinolates on the basis of mass spectra obtained during liquid chromatography-diode array-electrospray ionisation mass spectrometry analysis: Method verification for sprouts of different Brassicaceae species extracts
PublikacjaOver the past decade, glucosinolates (GLs) present in different tissues of Brassicaceae and their breakdown products, especially isothiocyanates formed after myrosinase catalyzed hydrolysis, have been regarded as not only environment friendly biopesticides for controlling soilborne pathogens, but most importantly as promising anticarcinogenic compounds. For these reasons, the identification and quantitative determination of the...
-
WYMAGANIA STAWIANE LEKKIEJ OBUDOWIE
PublikacjaW artykule omówiono wymagania stawiane lekkim obudowom. Przywołano odpowiednie normy i rozporządzenia dotyczące zagadnień ogólnobudowlanych i techniczno-użytkowych.
-
Analysis of regulations regarding transport of dangerous goods by road in Poland and in Europe
PublikacjaThe subject of the article are regulations regarding transport of hazardous materials in road transportation. In Poland, as well as in most European countries, these regulations are mainly governed by the ADR Agreement, which is a supra-national legal act. The article contains an analysis of the mentioned legal act. Despite the fact that the ADR Agreement harmonizes regulations concerning the transport of hazardous materials, there...
-
Dynamic state assessment of the water turbine with the power of 600 kW
PublikacjaThe article discusses the results of experimental studies to assess the dynamic state of the turbine set with the Kaplan turbine. The dynamic assessment was made on the basis of appropriate standards, based on the measurement results of selected parameters of vibration, which have been measured for several states of the machine load. In addition, we attempted to identify the causes of the increased vibration levels based on the...
-
Depth Determination Accuracy of the Modified Prony Method in a Swath Mapping Application
PublikacjaThis article presents the performance of the modified Prony method in a swath mapping application. Depth determination accuracy is assessed by processing raw signal acquired by an EdgeTech 6205 swath bathymetry system over flat seafloor. An updated version of the method, proposed previously by the authors, is used to determine the number of signal echoes. The number of signal echoes is essential for performing the low-rank approximation...
-
The influence of position of the post or its absence on the performance of the cable barrier system
PublikacjaRoad safety barriers are used to increase safety in potentially dangerous places on the roads. They are designed and installed on the roads to prevent any vehicle from getting outside the travelled way or from entering the opposite lane of the road. Barriers, which are used on European roads, have to undergo full scale crash tests according to the EN 1317 standards. Nowadays as a supplement to real crash tests, numerical simulations...
-
Design for all
Kursy OnlineThe aim of the course is to increase awareness of the needs of people with special needs and the idea of universal design. The subject is to introduce the social and legal conditions of the profession of architect, focused on the needs of all vulnerable user groups, including people with disabilities and the elderly. Knowledge of solutions related to Design for All is necessary due to the implementation of directives and standards...
-
Theory of architectural design V. Design for all 2024/25
Kursy OnlineThe aim of the course is to increase awareness of the needs of people with special needs and the idea of universal design. The subject is to introduce the social and legal conditions of the profession of architect, focused on the needs of all vulnerable user groups, including people with disabilities and the elderly. Knowledge of solutions related to Design for All is necessary due to the implementation of directives and standards...
-
Theory of architectural design V. Design for all
Kursy OnlineThe aim of the course is to increase awareness of the needs of people with special needs and the idea of universal design. The subject is to introduce the social and legal conditions of the profession of architect, focused on the needs of all vulnerable user groups, including people with disabilities and the elderly. Knowledge of solutions related to Design for All is necessary due to the implementation of directives and standards...
-
Karol Flisikowski dr inż.
OsobyKarol Flisikowski jest profesorem uczelni w Katedrze Statystyki i Ekonometrii, Wydziału Zarządzania i Ekonomii Politechniki Gdańskiej. Jest odpowiedzialny jest za prowadzenie zajęć ze statystyki opisowej i matematycznej (w języku polskim i angielskim), a także badań naukowych w zakresie statystyki społecznej. Był uczestnikiem wielu konferencji o zasięgu krajowym, jak i międzynarodowym, gdzie prezentował wyniki prowadzonych przez...
-
Semantic technologies based method of collection, processing and sharing information along food chain
PublikacjaIn the paper the method of collecting, processing and sharing information along food chain is presented. Innovative features of that method result from advantages of data engineering based on semantic technologies. The source to build ontology are standards and regulations related to food production, and data collected in databases owned by food chain participants. It allows food chain information resources can be represented in...
-
Manufacturing collective intelligence by the means of Decisional DNA and virtual engineering objects, process and factory
PublikacjaEngineering collective intelligence is paramount in current industrial times. This research proposes and presents case studies for collective knowledge structures required in the industry field. Knowledge structures such as Set of Experience and Decisional DNA are extended into more advanced knowledge structures for manufacturing processes. These structures are called Virtual Engineering Object, Virtual Engineering Process and...