Wyniki wyszukiwania dla: POWER ESTIMATION
-
Estimation of the effectiveness of nbpt for limiting ammonia emission from urea based on the field experiments
PublikacjaThe efectiveness of the ammonia emission reduction from NBPT-stabilized urea was investigating in 2011 during a field experiment on a grassland plot fertilized with a one-time dose of 60 kgN/ha. The obtained reduction coefficient of ammonia emission equaled 73% and 39-51% relative to erea without the inhibitor and ammonium nitrate, respectively.
-
The use of Response Surface Methodology for reliability estimation of aluminum silo subjected to wind load
PublikacjaAn axisymmetric aluminum silo model with a single, standardized geometric imperfection of its lateral surface is considered. The silo is wind – loaded only. The paper is focused on the critical, or limit value of wind pressure, both producing a loss of stability of the silo. This value is affected by vertical coordinate (position) of the imperfection and the angular relation between the imperfection and the wind direction. Reliability...
-
Robust Parameter Estimation and Output Prediction for Reactive Carrier-Load Nonlinear Dynamic Networks
PublikacjaIn this paper an extension of on-line model simplification technique for a class of networked systems, namely reactive carrier-load nonlinear dynamic networked system (RCLNDNS), kept within point-parametric model (PPM) framework is addressed. The PPM is utilised to acquire a piece wise constant time-varying parameter linear structure for the RCLNDNS suitable for the on-line one step ahead prediction that may be applied to monitoring...
-
New approaches to cutting resistance estimation of wood cutting process with circular-saw blades
PublikacjaTheoretical and experimental determination of values of cutting resistance belongs to the basic and simultaneously the most developed field of mechanics of this process. Energetic effects of wood sawing process are mainly calculated on the basis of the specific cutting resistance which, in wood cutting, is a function on a lot of factors. In this paper new method for calculation of cutting resistance is described. The latter method...
-
Free surface flow modeling in numerical estimation of flood risk zones: a case study
PublikacjaNa przykładzie doliny Wisły w Warszawie przedstawiono metodę wyznaczenia stref zagrożenia powodziowego. Symulowana numerycznie powódź wywołana została potencjalnym przerwaniem obwałowania rzeki w okolicach Saskiej Kępy. Do obliczeń zastosowano opracowany w Katedrze Hydrotechniki Wydziału Inżynierii Lądowej i Środowiska Politechniki Gdańskiej model dwuwymiarowego, płaskiego przepływu wody ze swobodną powierzchnią.
-
Respiration rate estimation for model predictive control of dissolved oxygen in wastewater treatment plant
PublikacjaRespiration rate is very important parameter for biological processes in wastewater treatment plant (WWTP). The sequential algorithm for estimate the respiration rate is proposed and investigated. The Kalman filter (KF) is used. Simulation tests for the benchmark WWTP are presented.Respiracja jest bardzo ważnym parametrem dla prawidłowego przebiegu procesów biologicznych w oczyszczalni ścieków. W artykule przedstawiono i zbadano...
-
Estimation of nitrogen leaching load from agricultural fields in the Puck Commune with an interactive calculator
Publikacja -
Innovative consciousness and threats estimation connected with implementation of innovations to SMEs cooperating with shipbuilding industry
PublikacjaPodejmowanie działań innowacyjnych przez małe i średnie przedsiębiorstwa nie jest szeroko rozpowszechnione. Wynika to, między innymi, ze specyfiki tego sektora. MSP często dysponują ograniczonymi środkami finansowymi i nisko wykwalifikowanymi pracownikami, co stanowi w wielu przypadkach barierę we wprowadzaniu innowacji. Nie mniej istotne są inne podmioty działające w otoczeniu MSP włączające się w realizacje procesu innowacyjnego....
-
Numerical estimation of the pile toe and shaft unit resistances during the installation process in sands
PublikacjaNumerical simulations of a pile jacking were carried out. A Coupled Eulerian–Lagrangian (CEL) formulation was used to treat with large deformation problems. An Abaqus, a commercial Finite Element Method software suit, was used as a computing environment. The Mohr–Coulomb constitutive model was applied and the Coulomb model of friction was used to describe pile-soil interaction. Calculations were made for three different pile diameters....
-
Estimation of the environmental risk posed by landfills using chemical, microbiological and ecotoxicological testing of leachates
Publikacja -
Close-Distance Optical Flow Fusion Using EKF for Multirotor UAV Position Estimation
Publikacja -
Estimation of the expected effects of different surface modifications on mechanical, chemical and biological behaviour of endoprostheses
PublikacjaPrzedstawiono koncepcję nowej endoprotezy o szczególnie wysokiej odporności na zużycie i pękanie. Koncepcja zakada wytwarzanie wieloetapową obróbkę powierzchniową kompozytu metalowo-ceramicznego.
-
Estimation of the River Flow Synchronicity in the Upper Indus River Basin Using Copula Functions
Publikacja -
Estimation of the size of informal employment based on administrative records with non‐ignorable selection mechanism
PublikacjaIn this study, we used company level administrative data from the National Labour Inspectorate and The Polish Social Insurance Institution in order to estimate the prevalence of informal employment in Poland in 2016. Since the selection mechanism is non‐ignorable, we employed a generalization of Heckman’s sample selection model assuming non‐Gaussian correlation of errors and clustering by incorporation of random effects. We found...
-
Using Disparity Map for Moving Object Position Estimation in Pan Tilt Camera Images
PublikacjaIn this paper we present the algorithm for rapid moving object position estimation in an images acquired from pan tilt camera. Detection of a moving object in a image acquired from a moving camera might be quite challenging. Standard methods that relay on analyzing two consecutive frames are not applicable due to the changing background. To overtake this problem we decided to evaluate the possibility of calculating a disparity...
-
An adaptive-noise Augmented Kalman Filter approach for input-state estimation in structural dynamics
PublikacjaThe establishment of a Digital Twin of an operating engineered system can increase the potency of Structural Health Monitoring (SHM) tools, which are then bestowed with enhanced predictive capabilities. This is particularly relevant for wind energy infrastructures, where the definition of remaining useful life is a main driver for assessing the efficacy of these systems. In order to ensure a proper representation of the physical...
-
Non-Adaptive Rotor Speed Estimation of Induction Machine in an Adaptive Full-Order Observer
PublikacjaIn the sensorless control system of an induction machine, the rotor speed value is not measured but reconstructed by an observer structure. The rotor speed value can be reconstructed by the classical adaptive law with the integrator. The second approach, which is the main contribution of this paper, is the non-adaptive structure without an integrator. The proposed method of the rotor speed reconstruction is based on an algebraic...
-
The Use of Free Adjustment and Msplit-Estimation for Determination of the Vertical Displacements in Unstable Reference System
PublikacjaThe problem of the determining of the displacements of engineering objects and their surroundings is the current and important issue in the field of engineering geodesy. Most control measurements are made in relation to reference points (stable points). On the other hand, sometimes it happens that it is not possible perform the measurements with reference to the stable points or identification of stable points is difficult. Therefore,...
-
Debonding Size Estimation in Reinforced Concrete Beams Using Guided Wave-Based Method
PublikacjaThe following paper presents the results of the theoretical and experimental analysis of the influence of debonding size on guided wave propagation in reinforced concrete beams. The main aim of the paper is a development of a novel, baseline-free method for determining the total area of debonding between steel rebar embedded in a concrete cover on the basis of the average wave velocity or the time of flight. The correctness of...
-
Improved magnitude estimation of complex numbers using alpha max and beta min algorithm
PublikacjaThe paper presents an improved algorithm for calculating the magnitude of complex numbers. This problem, which is a special case of square rooting, occurs for example, in FFT processors and complex FIR filters. The proposed method of magnitude calculation makes use of the modified alpha max and beta min algorithm. The improved version of the algorithm allows to control the maximum magnitude approximation error by using an adequate...
-
A method for preliminary estimation of the length of midship body block to be inserted during ship’s conversion
PublikacjaThe paper presents a method for preliminary estimation of the length of the midship body block, which inserted in the original hull, increases the deadweight of the ship in line with a required quantity. The method may be useful for establishing the scope of conversion to better adjust the ship for transportation tasks. The problem is formulated by using a mathematical model so selected that its solution, under set of assumptions,...
-
DMI measurements impact on a position estimation with lack of GNSS signals during Mobile Mapping
PublikacjaNowadays, Mobile Laser Scanning is common in use in addition to geodesy measurements. The data which are provided by the system characterizes with high precision and flexibility. To precise mapping, the accuracy of the data should be maintained. In Poland, according to the minister’s dispositions, the accuracy of the data should not exceeded 10 cm. With fully operated system it is easy to uphold, but there is a situation when a...
-
Computing methods for fast and precise body surface area estimation of selected body parts
PublikacjaCurrently used body surface area (BSA) formulas give satisfactory results only for individuals with typical physique, while for elderly, obese or anorectic people accurate results cannot be expected. Particularly noteworthy are the results for individuals with severe obesity (body-mass index greater than 35 kg/m2), for which BSA estimation errors reached 80%. The main goal of our study is the development of precise BSA models for...
-
CNN Architectures for Human Pose Estimation from a Very Low Resolution Depth Image
PublikacjaThe paper is dedicated to proposing and evaluating a number of convolutional neural network architectures for calculating a multiple regression on 3D coordinates of human body joints tracked in a single low resolution depth image. The main challenge was to obtain a high precision in case of a noisy and coarse scan of the body, as observed by a depth sensor from a large distance. The regression network was expected to reason about...
-
Atmospheric opacity estimation based on IWV derived from GNSS observations for VLBI applications
PublikacjaThermal emission of atmospheric water vapor has a great influence on the calibration of radio astronomical observations at millimeter wavelengths. The phenomenon of an atmospheric water vapor emits noise signal and attenuates astronomical emission. At 22 GHz, integrated water vapor (IWV) obtained from global navigation satellite systems (GNSS) is strictly related to atmospheric opacity (τ0), which is a crucial parameter for data...
-
The concept of estimation of elevator shaft control measurement results in the local 3D coordinate system.
PublikacjaGeodetic control measurements play an important part because they provide information about the current state of repair of the construction, which has a direct impact on the safety assessment of its exploitation. Authors in this paper have focused on control measurements of the elevator shaft. The article discusses the problem of determining the deviation of elevator shaft walls from the vertical plane in the local 3D coordinate...
-
A Proposed Soft Computing Model for Ultimate Strength Estimation of FRP-Confined Concrete Cylinders
PublikacjaIn this paper, the feed-forward backpropagation neural network (FFBPNN) is used to propose a new formulation for predicting the compressive strength of fiber-reinforced polymer (FRP)-confined concrete cylinders. A set of experimental data has been considered in the analysis. The data include information about the dimensions of the concrete cylinders (diameter, length) and the total thickness of FRP layers, unconfined ultimate concrete...
-
Rapid Multi-band Patch Antenna Yield Estimation Using Polynomial Chaos-Kriging
PublikacjaYield estimation of antenna systems is important to check their robustness with respect to the uncertain sources. Since the Monte Carlo sampling-based real physics simulation model evaluations are computationally intensive, this work proposes the polynomial chaos-Kriging (PC-Kriging) metamodeling technique for fast yield estimation. PC-Kriging integrates the polynomial chaos expansion (PCE) as the trend function of Kriging metamodel...
-
A framework for accelerated optimization of antennas using design database and initial parameter set estimation
PublikacjaThe purpose of this paper is to exploit a database of pre-existing designs to accelerate parametric optimization of antenna structures is investigated. Design/methodology/approach The usefulness of pre-existing designs for rapid design of antennas is investigated. The proposed approach exploits the database existing antenna base designs to determine a good starting point for structure optimization and its response sensitivities....
-
Controlled Random Search Applied to Parameters Estimation of the Longitudinal Solutes Transport Model for Rivers
PublikacjaNumerical computations are presented for the longitudinal transport of passive, conservative solutes in an actual river with the inclusion of geometrical complexities of river channels. A special emphasis is put on the method of the identification of model parameters which is based on a specially designed optimisation procedure using random control search algorithm. Two different situations are considered namely a linear version...
-
Direct estimation of elements of algebra of quantum states and entanglement detection via linear contraction.
PublikacjaWykazano możliwość obliczenia elementów algebry generowanej przez macierze bez uprzedniej rekonstrukcji stanu. Ponadto wykazano, że pewne testy separowalności oparte o liniowe operacje zwężające można przeprowadzić bez uprzedniej rekonstrukcji badanych stanów.
-
A Selection of Starting Points for Iterative Position Estimation Algorithms Using Feedforward Neural Networks
PublikacjaThis article proposes the use of a feedforward neural network (FNN) to select the starting point for the first iteration in well-known iterative location estimation algorithms, with the research objective of finding the minimum size of a neural network that allows iterative position estimation algorithms to converge in an example positioning network. The selected algorithms for iterative position estimation, the structure of the...
-
On the Usefulness of the Generalised Additive Model for Mean Path Loss Estimation in Body Area Networks
PublikacjaIn this article, the usefulness of the Generalised Additive Model for mean path loss estimation in Body Area Networks is investigated. The research concerns a narrow-band indoor off-body network operating at 2.45 GHz, being based on measurements performed with four different users. The mean path loss is modelled as a sum of four components that depend on path length, antenna orientation angle, absolute difference between transmitting...
-
Respiration rate estimation using non-linear observers in application to wastewater treatment plant
PublikacjaA problem of respiration rate estimation using two new non-linear observers for a wastewater treatment plant is addressed in this paper. In particular, a non-linear adaptive Luenberger-like observer and a super twisting sliding mode observer have been derived to produce stable and bounded estimates of the respiration rate. During the synthesis of the particular observer, an appropriate mathematical utility model was used. The observability...
-
Estimation of the aluminum salt effect on homopolymerization of acrylamide and its copolymerization with acrylic acid by DSC
Publikacja -
Instrument detection and pose estimation with rigid part mixtures model in video-assisted surgeries
PublikacjaLocalizing instrument parts in video-assisted surgeries is an attractive and open computer vision problem. A working algorithm would immediately find applications in computer-aided interventions in the operating theater. Knowing the location of tool parts could help virtually augment visual faculty of surgeons, assess skills of novice surgeons, and increase autonomy of surgical robots. A surgical tool varies in appearance due to...
-
Dual-wavelength laser polarimeter and its performance capabilities
PublikacjaA dual-wavelength optical polarimetric approach has been proposed as a means of elimination of the systematic errors and estimation of the optical anisotropy parameters for a single DKDP crystal. Our HAUP-related polarimeter uses two semiconductor lasers with the neighbouring wavelengths of 635 nm and 650 nm. Based on the temperature dependence analysis of small characteristic azimuths of light polarization with respect to the...
-
Two-Row ESPAR Antenna with Simple Elevation and Azimuth Beam Switching
PublikacjaIn this letter, we propose a two-row electronically steerable parasitic array radiator (ESPAR) antenna designed for direction of arrival (DoA) estimation in Internet of Things (IoT) applications relying on simple microcontrollers. The antenna is capable of elevation and azimuth beam switching using a simple microcontroller-oriented steering circuit and provides 18 directional radiation patterns, which can be grouped in 3 distinctive...
-
RSS-Based DoA Estimation Using ESPAR Antenna for V2X Applications in 802.11p Frequency Band
PublikacjaIn this paper, we have proposed direction-of arrival (DoA) estimation of incoming signals for V2X applications in 802. 11p frequency band, based on recording of received signal strength (RSS) at electronically steerable parasitic array radiator (ESPAR) antenna's output port. The motivation of the work was to prove that ESPAR antenna used to increase connectivity and security in V2X communication can...
-
Time Delay Estimation in Two-Phase Flow Investigation Using the γ-Ray Attenuation Technique.
PublikacjaTime delay estimation is an important research question having many applications in a range of technologies. Measurement of a two-phase flow in a pipeline or an open channel using radioisotopes is an example of such application. For instance, the determination of velocity of dispersed phase in that case is based on estimation of the time delay between two stochastic signals provided by scintillation probes. The proper analysis...
-
A novel method of local chirp-rate estimation of LFM chirp signals in the time-frequency domain
PublikacjaIn the paper, novel dynamic representations of a complex signal in the time-frequency domain are introduced. The proposed approach is based on using the gradient of the short-time Fourier transform complex phase. A channelized instantaneous complex frequency (CICF) and a complex local group delay (CLGD) are included in the presented signal representations. An application of the newly-introduced distributions is demonstrated by...
-
Comparison of Average Energy Slope Estimation Formulas for One-dimensional Steady Gradually Varied Flow
PublikacjaTo find the steady flow water surface profile, it is possible to use Bernoulli’s equation, which is a discrete form of the differential energy equation. Such an approach requires the average energy slope between cross-sections to be estimated. In the literature, many methods are proposed for estimating the average energy slope in this case, such as the arithmetic mean, resulting in the standard step method, the harmonic mean and...
-
Matrix Strengthening the Identification of Observations with Split Functional Models in the Squared Msplit(q) Estimation Process
Publikacja -
Deformation Analysis of Geodetic Networks by Applying M split Estimation with Conditions Binding the Competitive Parameters
Publikacja -
Set membership estimation of parameters and variables in dynamic networks by recursive algorithms with moving measurment window
PublikacjaW artykule rozważana jest łączna estymacja przedziałowa zmiennych i parametrów w złożonej sieci dynamicznej w oparciu niepewne modele parametryczne i ograniczoną liczbę pomiarów. Opracowany został rekursywny algorytm estymacji z przesuwnym oknem pomiarowym, odpowiedni dla monitorowania sieci on-line. Okno pomiarowe pozwala na stabilizowanie klasycznego algorytmu rekurencyjnego estymacji i znacznie poprawienie obcisłości estymat....
-
The estimation of regional oil recovery capacity based on marine oil spill response scenario in Vietnam
Publikacja -
Estimation of interior-permanent-magnet-synchronous-motor rotor position by analysis of phase-current derivatives
PublikacjaThis paper describes an algorithm for estimation of IPMSM rotor angular position. The algorithm uses derivatives of motor phase currents resulting from PWM modulation to obtain the rotor position. The presented method is designed for medium- and high-speed range, since it is based on determination of the EMF vector. Calculation of the motor position is performed in every PWM cycle. The standard SV-PWM method is used to determine...
-
Mixed algorithm in searches of mechanical system steady-state conditions for low precision of the state estimation
PublikacjaW pracy zaprezentowano algorytm poszukiwania rozwiązania układu równań nieliniowych. Nieliniowe funkcje lewych stron znane są z ograniczoną dokładnością, a wzory określające ich pochodne względem czasu nie są znane. Wartości pochodnych wyznaczane są numerycznie za pomocą różnic skończonych. Z uwagi na niską precyzje wyznaczania wartości funkcji, wartości pochodnych znane są jedynie z ograniczoną dokładnością., pochodne zawierają...
-
Downlink Capacity-Coverage Trade-off Estimation Based on Measurement of WCDMA/FDD Interface Load
PublikacjaThe method of capacity-coverage trade-off determination by using of universal load characteristics and normalized coverage curves for the WCDMA/FDD radio interface has been presented. The practical applications of discussed method for UMTS radio network planning process and network exploitation has been mentioned.
-
Study of probe signal bandwidth influence on estimation of coherence bandwidth for underwater acoustic communication channel
PublikacjaA signal transmitted in a shallow Underwater Acoustic Communication (UAC) channel suffers from time dispersion due to the multipath propagation and the refraction phenomena. This causes intersymbol interference of the received signal and frequency-selective fading observed in its spectrum. Coherence bandwidth is one of the key transmission parameters used for designing the physical layer of a data transmission system to minimise...