Wyszukiwarka
Wyniki wyszukiwania dla: nadchloran kobaltu
-
The effect of cobalt addition on the corrosion behavior of near equiatomic NiTi shape memory alloy in normal saline solution, impedance and microscopic studies
Dane BadawczeThe electrochemical and corrosion (uniform and localized) behavior of a binary Ni52Ti48 shape memory alloy (SMA) and two ternary Ni52Ti48-xCox (x = 1.5 and 4.0 wt.%) SMAs were studied. Measurements were conducted in 0.9% NaCl solution at 37 oC. This dataset contains the results of electrochemical impedance spectroscopy (EIS) studies done on daily basis...
-
The lanthanide influence on selected properties of BaLnCo2O6-δ
PublikacjaThe subject of research of this dissertation are cobalt oxides with a double perovskite structure with a general formula BaLnCo2O6-δ, where Ln stands for La, Pr, Nd, Sm, Gd, Tb, Dy. The aim of the study was to verify the ability of these materials to form the protonic defects, as well as to identify the factors determining this ability. As part of the work, materials from the proposed group were synthesised and characterized. To...
-
Solvation and partial molar volumes of some transition metal cations in N,N-dimethylacetamide, triethylphosphate and acetonitrile.
PublikacjaW oparciu o precyzyjne pomiary gęstości roztworów nadchloranów metali przejściowych szeregu Mn(II)-Zn(II) w DMA, TEP i AN wyznaczono pozorne molowe oraz graniczne wartości cząstkowych molowych objętości sole w temperaturach 293, 298 i 303,15 K. Wyznaczone wartości rozdzielono na udziały jonowe. Przeanalizowano czynniki decydujące o wielkości cząstkowych molowych objętości solwatowanych kationów.
-
Apparent molar compressibilities and volumes of some 1,1-electrolytes in N,N-dimethylacetamide and N,N-dimethylformamide
PublikacjaZmierzono gęstości roztworów tetrafenyloboranu sodu, bromku tetrafenylofosfoniowego, bromku sodu i nadchloranu sodu w N, N-dimetyloacetamidzie i N,N-dimetyloformamidzie w zakresie stężeń (0.015 to 0.40) mol·kg-1 w zakresie temperatur od 283.15 K do 333.15 K. Z uzyskanych danych obliczono pozorne i cząstkowe objętości molowe jak również rozszerzalności temperaturowe. Dodatkowo, wartości prędkości rozchodzenia się dźwięku...
-
Mixed-ligand complexes of zinc(II), cobalt(II) and cadmium(II) with sulfur, nitrogen and oxygen ligands. Analysis of the solid state structure and solution behavior. Implications for metal ion substitution in alcohol dehydrogenase
Publikacja -
Cobalt(II) tri-tert-butoxysialanethiolates.Synthesis, properties, crystal and molecular structures of [Co{SSi(OtBu)3}2(L)] and[Co{SSi(OtBu)3}2(L)2] type complexes with monodentate nitrogen ligands.
PublikacjaThe title heteroleptic neutral cobalt(II) tri-tert-butoxysilanethiolate complexes with monodentate nitrogen bases (L) as additional ligands have been prepared by the reactions of [Co{μ-SSi(OtBu)3}{SSi(OtBu)3}(NH3)]2 (1) with respective bases. For pyridine both types have been prepared...
-
A review of applications of ellipsometry in corrosion research
PublikacjaElipsometria jest to nieinwazyjna i bardzo dokładna technika pomiarowa znajdująca coraz więcej zastosowań w badaniach korozyjnych. Poglądowo przedstawiono aktualne zastosowania pomiarów elipsometrycznych. Przeglądu dokonano pod kątem przydatności elipsometrii do wyznaczania grubości oraz charakterystyki optycznej cienkich warstewek pasywnych pokrywających powierzchnię różnych metali. Opisano zastosowanie pomiarów elipsometrycznych...
-
Zastosowania pomiarów elipsometrycznych w badaniach korozyjnych
PublikacjaElipsometria jest to nieinwazyjna i bardzo dokładna technika pomiarowa znajdująca coraz więcej zastosowań w badaniach korozyjnych. Poglądowo przedstawiono aktualne zastosowania pomiarów elipsometrycznych. Przeglądu dokonano pod kątem przydatności elipsometrii do wyznaczania grubości oraz charakterystyki optycznej cienkich warstewek pasywnych pokrywających powierzchnię różnych metali. Opisano zastosowanie pomiarów elipsometrycznych...
-
Synthesis and characterization of mononuclear Zn(II), Co(II) and Ni(II) complexes containing a sterically demanding silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol
PublikacjaFour heteroleptic complexes of zinc(II), cobalt(II) and nickel(II) containing a monodentate silanethiolate ligand derived from tris(2,6-diisopropylphenoxy)silanethiol (TDST), were prepared and characterized. The geometries of ligands in the complexes are typical: distorted tetrahedral in zinc and cobalt(II) complexes and square planar in nickel(II) compound. Magnetic studies performed for Ni(II) and Co(II) compounds confirm the...
-
TiO 2 Co x O y composite nanotube arrays via one step electrochemical anodization for visible light–induced photocatalytic reaction
PublikacjaTiO2CoxOy (x = 1, y = 1 or x = 3, y = 4) composite photocatalysts have been synthesized via one step anodic anodization of TiCo alloys. The effects of the cobalt content in the alloy (5, 10 and 15 wt%), water content (2, 5 and 10%) in the electrolyte solution, and applied voltage (30, 40 and 50 V) during the anodization process on the morphology and surface properties. Additionally, the dependence of cobalt content in the nanotubes...
-
Badania spektroskopowe wybranych silanotiolanów metali o budowie polimerycznej
PublikacjaPodjęto próby otrzymania tri-tert-butoksysilanotiolanowych kompleksów niklu(II), kobaltu(II), cynku(II) i kadmu(II) o budowie polimerycznej mogących pełnić rolę prekursorów w syntezie materiałów funkcjonalnych. W tym celu przeprowadzono syntezy odpowiednich silanotiolanowych metali z grupą diamin alifatycznych. Otrzymano szereg nowych obojętnych polimerów koordynacyjnych o budowie przestrzennej typu 1D. Dla siedmiu z nich zostały...
-
Składniki mineralne
PublikacjaOpisano zawartość w żywności, przyswajalność oraz rolę w organizmie człowieka, tzw. składników mineralnych. Obecnie za składniki mineralne uważane są następujące pierwiastki: wapń, fosfor, siarka, sód, potas, chlor, magnez, żelazo, fluor, krzem, cynk, a także mangan, miedź, selen, jod, molibden, chrom, kobalt i bor.
-
Justyna Kucińska-Lipka dr hab. inż.
Osoby -
Chapter 8. New composite materials for electrochemical capacitors
PublikacjaW pracy zaprezentowano materiały hybrydowe składające się z polimeru przewodzącego elektronowo połączonego z nieorganiczną siecią typu redoks. Te materiały to poli(3,4-etylenodioksytiofen) modyfikowany heksacyjanożelazianem (II/III) żelaza (pEDOT/Fehcf), kobaltu (pEDOT/Cohcf) i niklu (pEDOT/Nihcf).Materiały elektrodowe scharakteryzowano metodami elektrochemicznymi w elektrolitach niewodnych. Otrzymane materiały hybrydowe cechują...
-
Thermodynamic Properties of Inorganic Salts in Nonaqueous Solvents. VI. Apparent Molar Volumes, Expansibilities, and Compressibilities of Divalent Transition Metal Ions in Methanol and Dimethylsulfoxide
PublikacjaThe temperature dependence of the density of divalent transition metal perchlorates in dimethylsulfoxide as well as cobalt(II), nickel(II) perchlorates, and copper(II) trifluoromethanesulfonate in methanol was determined. Moreover, sound velocities for solutions of cobalt(II), nickel(II) perchlorates, and copper(II) trifluoromethanesulfonate in methanol have been measured at 298.15 K. From these data, the partial molar volumes,...
-
Study of structures and properties of the laser cladding exhaust valve after service
PublikacjaPrzylgnie zaworów wydechowych silnie obciążonego silnika okrętowego zostały pokryte warstwą wykonana ze stopu kobaltu za pomocą techniki napawania laserowego. Tak przygotowane zawory były eksploatowane przez 3000 godzin w silniku Daru Młodzieży. Po tym czasie zostały zdemontowane i poddane szczegółowej analizie. Warunki pracy spowodowały powstanie na powierzchni przylgni warstwy tlenków o różnej grubości, wykazującej skłonność...
-
Electrochemical activity and characterization of hybrid material consisted of poly(3,4- ethylenedioxythiophene) and silver hexacyanocobaltate
PublikacjaPrac przedstawiono charakterystykę elektrochemiczną oraz powierzchniową materiału hybrydowego składającego się z polimeru przewodzącego, poli(3,4-etylenodioksytiofenu) oraz nieorganicznej sieci typu redoks, heksacyjanokobaltanu srebra. Materiał scharakteryzowano technikami jak AFM, SEM. Skład materiału oznaczono za pomocą mikroanalizy rentgenowskiej EDX. Analiza potwierdziła obecność sieci nieorganicznej w materiale. Proporcja...
-
Internal friction in pure Co and CoPt alloy during ordering
PublikacjaZbadano tarcie wewnętrzne, wskaźnik modułu sprężystości postaciowej i podatność magnetyczną stopu CoPt (50% at. Pt) w stanie nieuporządkowanym, uzyskanym w wyniku oziębienia, podczas wyżarzania do 850 K przy wzrostach temperatury 6K/min. i 2K/min., stosując odwróconą skręcarkę wahadłową. Zaobserwowano maksimum tarcia wewnętrznego w CoPt przy 700 K oraz w monokrysztale kobaltu w 720 K w pobliżu martenzytycznej przemiany fazowej,...
-
Chromogenic azole diazothiacrown ethers
PublikacjaZsyntezowane zostały etery koronowe zawierające atomy siarki, dwa ugrupowania azowe oraz fragment pirolu lub imidazolu w makropierścieniu.Zbadana została zdolność zsyntezowanych związków makrocyklicznych pod kątem kompleksowania jonów metali metodą spektrofotometrii UV-vis.Największe zmiany spektralne zaobserwowano pod wpływem jonów ołowiu, miedzi, cynku, niklu, kobaltu oraz srebra.W przypadku jonów metali I i II grupy układu okresowego...
-
Syntheses, chemical strustures and properties of poly(ester-etherurethane)s crosslinked with styrene, synthesized from unsaturated oligo(alkylene ester-ether)diols and 4,4'-diphenylmethane diisocyanate
PublikacjaMetodą dwuetapową, w reakcji syntezy wytworzonych uprzednio oligo(alkilenoestro-etero)dioli (OAEE) z 4,4'-diizocyjanianem difenylometanu (MDI) otrzymano nowe nienasycone poli(estro-eterouretany) (NPEEUR), które następnie poddano sieciowaniu styrenem wobec inicjatorów polimeryzacji rodnikowej: nadtlenku metyloetyloketonu (MEKPO) i 2-etylocykloheksanianu kobaltu (EtHCo). Usieciowane PEEUR scharakteryzowano na podstawie badań wytrzymałości...
-
CuMn1.7Fe0.3O4 – RE2O3 (RE=Y, Gd) bilayers as protective interconnect coatings for Solid Oxide Cells
PublikacjaEfficient replacement of materials based on critical elements such as cobalt is one of the greatest challenges facing the field of solid oxide cells. New generation materials, free of cobalt show potential to replace conventional materials. However, these materials are characterized by poor ability to block chromium diffusion. This article described the study of CuMn1.7Fe0.3O4 (CMFO) spinel combined with single metal oxide (Y2O3...
-
Electric and magnetic properties of Lanthanum Barium Cobaltite
PublikacjaThe cubic Ba0.5La0.5CoO3‐δ was synthesized using solid state reaction. The structural properties were determined by the simultaneous refinement of Synchrotron Powder X‐ray Diffraction and Neutron Powder Diffraction data. Iodometric titration was used to examine the oxygen stoichiometry and average cobalt oxidation state. Low‐temperature magnetic studies show soft ferromagnetic character of fully oxidized material, with θP = 198(3)...
-
Ocena jakości kompostów z osadów nadmiarowych na podstawie zawartości wybranych metali ciężkich.
PublikacjaOznaczono zawartość metali ciężkich w próbkach kompostu pochodzących z dwóch niezależnych od siebie oczyszczalni mechaniczno-biologicznych wyposażonych w kompostownie pryzmowe. Oczyszczalnie posiadają zbliżoną technologię oczyszczania ścieków, a nadmiarowy osad utylizują poprzez przyrodnicze wykorzystanie. W próbkach kompostów oznaczono następujące metale ciężkie: cynk, żelazo, ołów, kadm, kobalt, miedź, nikiel, mangan i magnez,...
-
Regeneracja zaworów silników okrętowych metodą napawania laserowego
PublikacjaAnalizowano możliwości zastosowania napawania laserowego proszkiem na bazie kobaltu przylgni zaworu wylotowego okrętowego silnika Diesla. Po przygotowaniu przez obróbkę skrawaniem, wyselekcjonowane zawory poddano napawaniu laserowemu z wykorzystaniem lasera wysokiej mocy ROFIN DL020. Do napawania użyto proszku EuTroLoy 16012. Jeden z zaworów został pocięty i poddany badaniom metalograficznym oraz pomiarom twardości, a pozostałe...
-
Magnetic properties of α-KCoPO4 compound with a chiral polar crystal structure
PublikacjaWe have obtained polycrystalline samples of a metastable α variant of KCoPO4 by low temperature (350–400 °C) solid state metathesis reaction of potassium oxalate and ammonium cobalt orthophosphate. The material crystallizes in a polar chiral structure (sg. P63, no. 173). Measurements of magnetic properties reveal antiferromagnetic interactions and no ordering observed down to T = 1.9 K, well below the Weiss temperature |Θcw| =...
-
Mass transfer in Spinning Fluids Reactor — Measurement and prediction
PublikacjaSpecific mass transfer area (a) and overall volumetric mass transfer coefficient (kLa) are mass transfer parameters commonly used in the description and comparison of various chemical reactors’ constructions. Determination of these was performed for Spinning Fluids Reactor (SFR). Sodium sulfite oxidation in the presence of cobalt ion catalyst was used for the determination of a and kLa. The a and kLa were successful predicted....
-
Failure analysis of the exhaust valve face in diesel marine engine
PublikacjaThe exhaust valve from marine diesel engine which was damaged after 2000 hours of service was investigated. In order to prolong the service time the valve face was cladded with cobalt base alloy using laser technique. After failure microstructural and chemical analyses reviled that cladding process was conducted improperly. The chemical composition of the clad layer was far from the designed one and what more completely inhomogeneous....
-
Enhanced electrochemical performance of partially amorphous La0.6Sr0.4CoO3-δ oxygen electrode materials for low-temperature solid oxide cells operating at 400 °C
PublikacjaThis work evaluates partially amorphous La0.6Sr0.4CoO3-δ (LSC) as a potential oxygen electrode for lowtemperature solid oxide cells. LSC was deposited using the spin-coating technique onto Ce0.8Gd0.2O2-δ (CGO) substrates. The optimal oxygen electrode thickness was determined as 500 nm. The electrochemical impedance spectroscopy (EIS) study showed a significant improvement in oxygen reduction/oxidation reaction kinetics when annealing...
-
Fe-modified Mn2CuO4 spinel oxides: coatings based on abundant elements for solid oxide cell interconnects
PublikacjaThe current state of the art steel interconnect coating materials are based on critical raw material - Co-oxide spinels. Replacing Co-oxide spinels with alternative, abundant materials can reduce the dependence on the critical raw materials. Cobalt-free coatings with the general formula Mn2-xCuFexO4, where x = 0, 0.1, 0.3, were electrophoretically deposited on a ferritic stainless-steel support and evaluated. Prior to deposition,...
-
Multilayer coatings based on cerium oxide and manganese cobaltite spinel for Crofer22APU SOC interconnects
PublikacjaThe current state of the art steel interconnect coating materials are based on critical raw material - Co-oxide spinels. Replacing Co-oxide spinels with alternative, abundant materials can reduce the dependence on the critical raw materials. Cobalt-free coatings with the general formula Mn2-xCuFexO4, where x = 0, 0.1, 0.3, were electrophoretically deposited on a ferritic stainless-steel support and evaluated. Prior to deposition,...
-
Valence state of Manganium in a MnCoO ceramics
Dane BadawczeManganium -cobalt based ceramics materials were produced by solid state reaction and sintred in a furnance in air atmosphere for 20h. Annealing temperature was 600 Celsius degree. For investigations a series of samples, with a various composition was chosen: MnCoO, Mn, Co2O and Mn2CoO. In order to determine valence states of the Mn, X-Ray photoemission...
-
Behavior of the exhaust valve cladding face under the service conditions
PublikacjaPodczas eksploatacji silnika okrętowego kluczowym problemem jest trwałośc zaworów wylotowych a w szczególności wąskiego fragmentu - przylgni grzybka zaworu, która decyduje o szczelności zaworu.Przylgnia wykonana przez laserowe napawanie stopu kobaltu została poddana badaniom w warunkach normalnej eksploatacji silnika L22 przez 2 lata. W tym czasi silnik był zasilany zarówno paliwem lekkim jak i biopaliwem. Po zdemontowaniu głowicy...
-
Possible quadrupole-order-driven commensurate-incommensurate phase transition in B20 CoGe
PublikacjaThe B20-type cobalt germanide CoGe was investigated by measuring the specific heat, resistivity, and 59Co nuclear magnetic resonance (NMR).We observed a phase transition at TQ = 13.7 K, evidenced by a very narrow peak of the specific heat and sharp changes of the nuclear spin-spin (T −1 2 ) and spin-lattice (T −1 1 ) relaxation rates. The fact that the entropy release is extremely small and the Knight shift is almost independent...
-
Ferromagnetic nanoparticles imaging by means of Magnetic Force Microscopy
Dane BadawczeFerromagnetic nanoparticles can be used as building blocks for advanced thin film magnets, and can also be used in data storage and biomedical technologies. Nano-crystalline ferrites with the chemical formula NixZn (1 - x) Fe2O4, where x = 0, 0.2, 0.4, 0.6, 0.8, 1.0 show anti-corrosion properties and suppress electromagnetic interference, in the case...
-
Allergic reactions as a defense of the organism to the influence of implants components made of stainless steel
PublikacjaDue to the increasing number of cases of hypersensitivity caused by direct contact with metals, as well as the increasing demand for implants in humans all ages numerous studies on the effects of the impact of implant components are being carried out. The paper presents the phenomenon of etiology of allergy in general terms and in relation to the biomaterials used in medicine. There have been characterized in terms of impact on...
-
Tetrahedrally modified MnMe0.1Co1.9O4 (Me = Zn, Mg, Li) spinels for non-enzymatic glucose sensing
PublikacjaIn this work, tetrahedrally modified MnMe0.1Co1.9O4 (Me = Zn, Mg, Li) spinels were prepared via the sol–gel synthesis method with subsequent ball-milling fragmentation. The prepared samples were evaluated as glucose–sensing catalyst. The reference MnCo2O4 spinel exhibited a sensitivity of 49 µA mM−1 cm−2 and a nonlinearity error of 5.2% in the response range from 0.02 to 1 mM. The partial substitution of cobalt in the reference...
-
Allergic Reactions as a Defense of the Organism to the Influence of Implants Components Made of Stainless Steel
PublikacjaDue to the increasing number of cases of hypersensitivity caused by direct contact with metals, as well as the increasing demand for implants in humans all ages numerous studies on the effects of the impact of implant components are being carried out. The paper presents the phenomenon of etiology of allergy in general terms and in relation to the biomaterials used in medicine. There have been characterized in terms of impact on...
-
Electrophoretic co-deposition of Fe2O3 and Mn1,5Co1,5O4: Processing and oxidation performance of Fe-doped Mn-Co coatings for solid oxide cell interconnects
PublikacjaThe “in-situ” Fe-doping of the manganese cobalt spinel was achieved by electrophoretic co-deposition of Mn1,5Co1,5O4 and Fe2O3 powders followed by a two-step reactive sintering treatment. The effects on the coating properties of two different Fe-doping levels (5 and 10 wt.% respectively) and two different temperatures of the reducing treatment (900 and 1000 °C) are discussed. Samples with Fe-doped coatings demonstrated a lower...
-
Low temperature deposition of dense MnCo 2 O 4 protective coatings for steel interconnects of solid oxide cells
PublikacjaIn this work manganese cobalt spinel (MnCo2O4) coatings were deposited on steel substrates by spray pyrolysis at 390 °C. This is at much lower temperatures than previously reported (typically in excess of 900 °C). It was possible to produce coatings with well controlled thickness (2-5-10 μm). The as-deposited coatings were evaluated for their microstructural changes and electrical conductivity up to 800 °C. Results confirm the...
-
Akumulacja metali ciężkich w wybranych gatunkach ryb bałtyckich
PublikacjaJednym z naturalnych składników basenów wodnych są metale ciężkie, jednak działanie czynników antropogenicznych powoduje, iż stężenie tych substancji chemicznych niekiedy wzrasta do poziomów zagrażających bezpośrednio wodnej florze i faunie oraz pośrednio zdrowiu człowieka. Celem badań była ocena skażenia mięsa bałtyckich ryb metalami ciężkimi. W ramach przeprowadzonych badań analizie zostały poddane następujące gatunki ryb: makrela...
-
Fabrication and photoactivity of organic-inorganic systems based on titania nanotubes and PEDOT containing redox centres formed by different Prussian Blue analogues
PublikacjaHerein, the heterojunction composed of an inorganic substrate: ordered hydrogenated titania nanotubes (H-TiO2NTs) and a deposited organic film: poly(3,4-ethylenedioxythiophene) (PEDOT) is reported. The conducting polymer is modified with different transition metal haxacyanoferrates (Mehcf), wherein as metal: copper, iron, cobalt and nickel are introduced. The presence of various metal centres provides characteristic redox activity...
-
High-Temperature Structural and Electrical Properties of BaLnCo2O6 Positrodes
PublikacjaThe application of double perovskite cobaltites BaLnCo2O6−δ (Ln = lanthanide element) in electrochemical devices for energy conversion requires control of their properties at operating conditions. This work presents a study of a series of BaLnCo2O6−δ (Ln = La, Pr, Nd) with a focus on the evolution of structural and electrical properties with temperature. Symmetry, oxygen non-stoichiometry, and cobalt valence state have been examined...
-
Structure and transport properties of donor-doped barium strontium cobaltites
PublikacjaIn this work, Nb-substituted barium strontium cobaltites Ba0.5Sr0.5Co1-xNbxO3-δ (x = 0 – 0.4) have been fabricated and studied. The structural analysis showed that the Nb content influences the lattice constant as well as the distance between the (Co, Nb) and oxygen atoms. The study of morphology of samples showed that the Nb content does not change the porosity, grain size and morphology of the ceramics. The total electrical conductivity...
-
Influence of Gd deposition on the oxidation behavior and electrical properties of a layered system consisting of Crofer 22 APU and MnCo2O4 spinel
PublikacjaIn the study, the surface of the Crofer 22APU ferritic steel was modified with gadolinium oxide nanoparticles and a protective-conducting layer consisting of the MnCo2O4 spinel. This system was studied in the context of application in IT-SOFC interconnects. Four types of samples were studied: unmodified steel, steel coated with a manganese-cobalt spinel layer, steel modified with gadolinium oxide nanoparticles, and a system consisting...
-
Novel Polyurethanes as Antifouling Paint Matrices
PublikacjaThe new poly(ester-ether urethane)s (PEEUR) were prepared in two stage synthesis from formerly obtained oligo(alkylene ester-ether)diols (OAEE) and 4,4‘-diphenylmethane diisocyanate (MDI). PEEUR samples were subjected to crosslinking with styrene in the presence of radical polymerization initiators: methyl ethyl ketone peroxide (MEKPO) or cobalt 2-ethyl cyclohexanoate (EtHCo). Crosslinked PEEUR were characterized by their physicochemical...
-
Synergistic effects of nitrogen-doped carbon and praseodymium oxide in electrochemical water splitting
PublikacjaHybrid materials featuring perovskite-type metal oxide in conjunction with heteroatom-doped graphene hold immense promise as alternatives to costly noble metal catalysts for electrochemical water splitting, facilitating the generation of environmentally friendly hydrogen. In this study, perovskite-type oxide containing praseodymium, barium, strontium, cobalt, and iron atoms dispersed in a carbon matrix as a catalyst is synthesized...
-
M-BDC (M = Co and/ or Fe) MOFs as effective catalysts for hydrogen generation via hydrolysis of sodium borohydride
PublikacjaMono- (Co-BDC, Fe-BDC) and bimetallic FeCo-BDC Metal-Organic Frameworks are successfully synthesized by the solvothermal method in DMF at 150 °C within 15 h and tested as catalysts for sodium borohydride hydrolysis. The materials are characterized by FTIR, PXRD, TGA, ICP-OES, H2-TPR, BET model, and SEM-EDS. The catalytic activity of these materials is studied for dehydrogenation of sodium borohydride in water at various temperatures...
-
Regeneration of marine engine valves using laser surfacing
PublikacjaThis article presents an analysis of the applicability of laser surfacing of the exhaust valve face of a marine diesel engine using cobalt-based powder. After preparation by machining, the selected valves were subjected to laser surfacing using a high-power ROFIN DL020 laser. The EuTroLoy 16012 powder was used in the surfacing process. One of the valves was cut and subjected to metallographic examination and hardness measurements,...
-
MnxCo3-xO4 spinel oxides as efficient oxygen evolution reaction catalysts in alkaline media
PublikacjaThe design of efficient electrocatalysts for oxygen evolution reaction (OER) is an essential task in developing sustainable water splitting technology for the production of hydrogen. In this work, manganese cobalt spinel oxides with a general formula of MnxCo3-xO4 (x=0, 0.5, 1, 1.5, 2) were synthesised via a soft chemistry method. Non-equilibrium mixed powder compositions were produced, resulting in high electrocatalytic activity....
-
Cu-Doped Layered Double Hydroxide Constructs the Performance-Enhanced Supercapacitor Via Band Gap Reduction and Defect Triggering
PublikacjaLayered double hydroxides (LDHs) are regarded as the excellent electrode materials for supercapacitors because of their high theoretical capacitance and abundance. However, the poor conductivity and limited reaction kinetics of LDHs restrict their practical application severely. Herein, Cu is chosen from groups VIII/IB/IIB as dopants for Co-based LDH (CuCo-LDH). The designed metal–organic framework-derived hierarchical CuCo-LDH...