Search
Filters
total: 292
filtered: 290
-
Catalog
Chosen catalog filters
Search results for: SAFETY EQUIPMENT
-
Remote command and control capabilities for data acquisition systems provided by delay-tolerant network mechanisms
PublicationThe paper presents an assessment of a remote device reconfiguration service employing a Delay Tolerant Network (DTN) mechanisms. This service has been implemented as a part of a communication appliance dedicated to marine data transfer in off-shore and open sea areas. The service has been successfully deployed and validation test have been completed. The practical use-case has been defined as remote access to the equipment operating...
-
Considerations of Adaptive Digital Communications in Underwater Acoustic Channel
PublicationDown-link communication (DLC) and air transportable communication (ATAC) buoys as well as autonomous underwater vehicles (AUV) use acoustic links for gathering oceanographic data from underwater monitoring systems. The underwater channel propagation conditions are diverse in nature and require a special adaptive approach to the communication system design. The article presents a methodology for the communication systems design,...
-
System setup and software for cyclic, staircase and square wave voltammetry measurements
PublicationHardware dedicated for electrochemical measurement sometimes does not allow performing certain voltammetry experiments. Staircase and square wave voltammetry, techniques which have many advantages comparing with standard voltammetric techniques, are rarely implemented in software controlling electrochemical measuring equipment. These methods, however, can be relatively easy realized with some addition...
-
Gas sampling system for matrix of semiconductor gas sensors
PublicationSemiconductor gas sensors are popular commercial sensors applied in numerous gas detection systems. They are reliable, small, rugged and inexpensive. However, there are a few problem limiting the wider use of such sensors. Semiconductor gas sensor usually exhibits a low selectivity, low repeatability, drift of response, strong temperature and moisture influence on sensor properties. Sample flow rate is one of the parameters that...
-
Future research directions in design of reliable communication systems
PublicationIn this position paper on reliable networks, we discuss new trends in the design of reliable communication systems. We focus on a wide range of research directions including protection against software failures as well as failures of communication systems equipment. In particular, we outline future research trends in software failure mitigation, reliability of wireless communications, robust optimization and network design, multilevel...
-
Small Scale Gasification of Biomass and Municipal Wastes for Heat and Electricity Production using HTAG Technology
PublicationCombustion and gasification technology utilizing high-cycle regenerative air/steam preheater has drawn increased attention in many application areas. The process is to be realized at temperature level above ash melting point using highly preheated agent. The use of highly preheated media above 900degC provides additional energy to conversion processes and results in considerable...
-
Constructing a Dataset of Speech Recordingswith Lombard Effect
PublicationThepurpose of therecordings was to create a speech corpus based on the ISLEdataset, extended with video and Lombard speech. Selected from a set of 165sentences, 10, evaluatedas having thehighest possibility to occur in the context ofthe Lombard effect,were repeated in the presence of the so-called babble speech to obtain Lombard speech features. Altogether,15speakers were recorded, and speech parameterswere...
-
Troubleshooting of the determination of bisphenol A at ultra-trace levels by liquid chromatography and tandem mass spectrometry
PublicationDetermination of trace amounts of bisphenol A (BPA) may cause problems mainly related to the presence of BPA in solvents (even in LC-MS grade), laboratory vessels, and plastic equipment used for sample preparation. Variable and sometimes significant amounts of BPA present in the background cause problems in obtaining good repeatability of measurements at the ultra-trace levels. Such observations (i.e., poor repeatability of results)...
-
PROPRIETARY SOFTWARE IN TECHNICAL HIGHER EDUCATION
PublicationThe authors present a relatively easy way to extend the quality of education in professional studies (engineering) on major “Geodesy and Cartography”. They indicate the possibility to deepen students’ knowledge by using in the educational process proprietary software enriching education. The authors use their own experiences, results of the cooperation with employers, as well as the effects of scientific research to introduce into...
-
PROPRIETARY SOFTWARE IN TECHNICAL HIGHER EDUCATION
PublicationThe authors present a relatively easy way to extend the quality of education in professional studies (engineering) on major “Geodesy and Cartography”. They indicate the possibility to deepen students’ knowledge by using in the educational process proprietary software enriching education. The authors use their own experiences, results of the cooperation with employers, as well as the effects of scientific research to introduce...
-
Enhanced method of DS-CDMA low level singnals detection
PublicationThe following article comprises three main parts. The first one generally describes two methods of low level signals detection which are in the interest of this study. The signal spectrum averaging technique is shown as well as the method exploiting averaged spectrum of the signal raised to the power of 2n (nN). Additionally, this section briefly presents proposed enhancements and modifications of these two solutions, which allow...
-
VARIABLE KINEMATICS OF HONING PROCESS – INFLUENCE ON MACHINED WORKPIECE
PublicationSurface quality of holes plays an important role in machine manufacturing industry especially in the production of car engines and hydraulic cylinders. Investigations of honing process were carried out by 6 years on horizontal CNC Sunnen’s honing machine HTH 4000S, on vertical conventional honing machine WMW’s SZS 200 and on CNC milling machine of Haas VF 3SS with equipment of Honingtec for honing. Measurements of cylindricity...
-
The Usage of the BP-Layers Stereo Matching Algorithm with the EBCA Camera Set
PublicationThis paper is concerned with applying a stereo matching algorithm called BP-Layers to a set of many cameras. BP Layers is designed for obtaining disparity maps from stereo cameras. The algorithm takes advantage of convolutional natural networks. This paper presents using this algorithm with a set called Equal Baseline Camera Array. This set consists of up to five cameras with one central camera and other ones aground it. Such a...
-
SIMPLY AND LOW COAST ELECTROMYOGRAPHY SIGNAL AMPLIFIER
PublicationRecently, there has been a noticeable increase in interest in solu tions utilizing electrical signals accompanying muscle activity. Electromyography (EMG) is a technique for recording, analysis and evaluating the electrical activity produced by striated muscle. Its great popularity is due, among other, to the ability to measure with non-invasive electrodes (calle d as sEMG surface electromyography)....
-
Prosthetic Elements Made of the Ti-13Zr-13Nb Alloy by Selective Laser Melting
PublicationThe fabrication of the prosthetic foundations and bridges from the Ti-13Zr-13Nb alloy is described. The process was started from CAD/CAM design of 3D models of the foundations based on scanning of patient`s mouth. Next, 3D models were transformed into *.stl files for the manufacturing stage and then the manufacturing process by means of the selective laser melting with the SLM Realizer 100 equipment was made. The intrinsic structure...
-
Texture Features for the Detection of Playback Attacks: Towards a Robust Solution
PublicationThis paper describes the new version of a method that is capable of protecting automatic speaker verification (ASV) systems from playback attacks. The presented approach uses computer vision techniques, such as the texture feature extraction based on Local Ternary Patterns (LTP), to identify spoofed recordings. Our goal is to make the algorithm independent from the contents of the training set as much as possible; we look for the...
-
Design and implementation of GEPON architecture in laboratory testbed
PublicationThis paper presents a proposition of GEPON architecture for the didactic purpose. The GEPON architecture is implemented in access networks laboratory testbed. The paper includes a brief description of GEPON standardization, a description of laboratory GEPON equipment architecture and a short presentation of proposed laboratory exercises. The exemplary performance results are included.The proposition of GEPON architecture testbed...
-
Failure of austenitic stainless steel tubes during steam generator operation
PublicationThe article presents the failure process of austenitic stainless steels used in power devices, such as heat exchangers, steam generators, in terms of local corrosion: pitting, stress and intergranular corrosion, paying particular attention to welded joints area. The effect of steel chemical composition, microstructure, welding process and work environment was analyzed. The second part of the article presents the results of the...
-
Examining Influence of Distance to Microphone on Accuracy of Speech Recognition
PublicationThe problem of controlling a machine by the distant-talking speaker without a necessity of handheld or body-worn equipment usage is considered. A laboratory setup is introduced for examination of performance of the developed automatic speech recognition system fed by direct and by distant speech acquired by microphones placed at three different distances from the speaker (0.5 m to 1.5 m). For feature extraction from the voice signal...
-
A simplified channel estimation procedure for NB-IoT downlink
PublicationThis paper presents a low-complexity channel estimation procedure which is suitable for use in energy-efficient NB-IoT user equipment devices. The procedure is based on the well-established least squares scheme, followed by linear interpolation in the time domain and averaging in the frequency domain. The quality of channel estimation vs. signal-to-noise ratio is evaluated for two channel models and compared with the performance...
-
Wroclaw University of Technology Knowledge Repository - project objectives
PublicationKnowledge Repository is a project created in the Library and Scientific Information Centre of Wroclaw University of Technology (WrUT). Its main task will be collecting, sharing, and promoting scientific publications of researchers, postgraduates and students of WrUT. It will be also used for bibliometric analysis and reporting research output of WrUT scientific community.Knowledge Repository will closely cooperate with other databases...
-
INFLUENCE OF WRONGLY ASSUMED PROBABILITY DISTRIBUTION ON THE UNCERTAINTY OF RESISTANCE MEASUREMENT BY TECHNICAL METHOD
PublicationThe paper presents studies on the influence of probability distributions on the expanded uncertainty of the resistance measurement. Choosing the correct probability distribution is very important to estimate of measurement uncertainty. The most commonly used distribution is the rectangular distribution. The paper presents the results of analysis of the resistance measurement uncertainty using the technical method of two resistances:...
-
MULTI-CRITERIA COMPARATIVE ANALYSIS OF THE USE OF SUBTRACTIVE AND ADDITIVE TECHNOLOGIES IN THE MANUFACTURING OF OFFSHORE MACHINERY COMPONENTS
PublicationThe dynamic development of additive manufacturing technologies, especially over the last few years, has increased the range of possible industrial applications of 3D printed elements. This is a consequence of the distinct advantages of additive techniques, which include the possibility of improving the mechanical strength of products and shortening lead times. Offshore industry is one of these promising areas for the application...
-
Processing of Satellite Data in the Cloud
PublicationThe dynamic development of digital technologies, especially those dedicated to devices generating large data streams, such as all kinds of measurement equipment (temperature and humidity sensors, cameras, radio-telescopes and satellites – Internet of Things) enables more in-depth analysis of the surrounding reality, including better understanding of various natural phenomenon, starting from atomic level reactions, through macroscopic...
-
Implementation of Contemporary Technologies in Naval Sonars Modernization
PublicationToday’s fast technological advancement in electronics and signal processing methods makes electronic systems, including sonars, obsolete very quickly. The Polish Navy seems to be particularly affected as its ships were built in the 1970s and 1980s. Researchers at the Gdansk University of Technology have developed a methodology for modernising Navy sonars which involves the use of new electronic sub-systems and modern, bespoke methods...
-
"Shadow" method application within endoscopic examinations of marine engines
PublicationThe paper deals with diagnostic issues concerning endoscopic examinations of the working spaces within marine diesel and gas turbine engines. In the beginning, the endoscopy apparatus being on the laboratory equipment of the Department of Ship Power Plants of Gdansk University of Technology in Poland has been characterized. The endoscopy considerations have been focused on theoretical bases of a digital image processing and especially...
-
"Shadow" method application within endoscopic examinations of marine engines
PublicationThe paper deals with diagnostic issues concerning endoscopic examinations of the working spaces within marine diesel and gas turbine engines. In the beginning, the endoscopy apparatus being on the laboratory equipment of the Department of Ship Power Plants of Gdansk University of Technology in Poland has been characterized. The endoscopy considerations have been focused on theoretical bases of a digital image processing and especially...
-
Integrated controller for ultra high frequency technique laboratory
PublicationDepartment of Microwave and Antenna Engineering decided to modernize the laboratory of Ultra High Frequency Techniques. The main change was to replace measurement of the field distribution inside rectangular waveguides by analysing the fields around striplines. This involved the need to overcome several technical and conceptual problems. Precise positioning of the probe and reading the field distribution near the stripline is important...
-
Simulation Model for Application of the SDN Concept in IMS/NGN Network Transport Stratum
PublicationThe paper presents a simulation model allowing examination of cooperation between two currently used telecommunication networks concepts: IP Multimedia Subsystem/Next Generation Network (IMS/NGN) and Software-Defined Networking (SDN). Application of the SDN architecture elements in IMS/NGN networks will enable unified control and management of transport resources for various transport technologies and equipment manufacturers. However,...
-
Biometric identity verification
PublicationThis chapter discusses methods which are capable of protecting automatic speaker verification systems (ASV) from playback attacks. Additionally, it presents a new approach, which uses computer vision techniques, such as the texture feature extraction based on Local Ternary Patterns (LTP), to identify spoofed recordings. We show that in this case training the system with large amounts of spectrogram patches may be difficult, and...
-
Cargo ships heat demand - operational experiment
PublicationThe paper presents the results of an experiment conducted on two cargo ships – a 5300 TEU container with a steam heating system and a 7500 dwt general cargo ship with a thermal oil system. On both ships research has been carried out using specially designed measuring equipment. After gathering data about flow velocity and temperatures (steam/ cooling water/ thermal oil/ seawater/ outside air), calculations have been done, resulting...
-
Novel Adaptive Method for Data Streams Allocation Based on the Estimate of Radio Channel Parameters in Heterogeneous WBAN Network
PublicationThe new adaptive method for data streams allocation in heterogeneous Wireless Body Area Networks and meas-urement equipment is presented. The results obtained using the developed method compared with the selected algorithms likely to be used in those networks. The pro-posed adaptive data streams allocation method based on radio channel parameters makes it even twice as efficient to use in terms of resources usage in a WBAN heterogeneous...
-
Stereo Camera Upgraded to Equal Baseline Multiple Camera Set (EBMCS)
PublicationThe paper presents the results of using a set of five cameras called Equal Baseline Multiple Camera Set (EBMCS) for making 3D images, disparity maps and depth maps. Cameras in the set are located in the vicinity of each other and therefore the set can be used for the purpose of stereoscopy similarly as a stereo camera.EBMCS provides disparity maps and depth maps which have a better quality than these maps obtained with the use...
-
A COMPARISON OF WEAR PROPERTIES OF WATER LUBRICATED NBR AND PTFE SLIDING BEARINGS
PublicationThe excessive wear of a journal shaft can be caused by many factors, for example, working conditions (e.g., temperaturę, slip speed, the type of lubricant), pressure, the type of material used on the bearings and shafts and their roughness, as well as contamination remaining in the system. This paper presents the roughness profiles co-operating with a rubber (NBR) and polytetrafluoroethylene (PTFE) bushes. The conditions of cooperation...
-
Decisional DNA based intelligent knowledge model for flexible manufacturing system
PublicationModeling an effective mechanism for design and control strategies for the implementation of a flexible manufacturing system (FMS) has been a challenge. Consequently, to overcome this issue various techniques have applied in the past but most of these models are effective only for some specific situation or an element of FMS. In this study, the knowledge representation technique of Decisional DNA (DDNA) is applied to FMS to develop...
-
Position Estimation in Corridors Along the Coupled Mode of Radiating Cables
PublicationRadiating cables are mostly used to provide radio communication in tunnels or corridors, but they can also be used to estimate the position of a mobile terminal along the cable. In this paper, a measuring receiver’s position was estimated by measuring the difference in the direct signal’s reception time, which was generated by a transmitter connected to one end of the radiating cable, and the delayed signal retransmitted from another...
-
Analysis of positioning methods using Global Navigation Satellite Systems (GNSS) in Polish State Railways (PKP)
PublicationEach year, global navigation satellite systems (GNSS) improve their accuracy, availability, continuity, integrity, and reliability. Due to these continual improvements, the systems are increasingly used in various modes of transport, including rail transport, the subject of this publication. GNSS are used for rail passenger information, rail traffic management, and rail traffic control. These applications differ in the positioning...
-
Green Aspects of Miniaturized Sample Preparation Techniques
PublicationCorrect monitoring and control of the state of the environment and scientific research on the subject of environmental protection often require that determinations of compounds present at very low concentrations be made in samples characterized by a matrix of complex composition (e.g., biological samples, water and soil samples). Moreover, due to the limited number of analytical techniques which are sufficiently sensitive to conduct...
-
Digital signal processing applied to the modernization of Polish Navy sonars
PublicationThe article presents the equipment and digital signal processing methods used for modernizing the Polish Navy’s sonars. With the rapid advancement of electronic technologies and digital signal processing methods, electronic systems, including sonars, become obsolete very quickly. In the late 1990s a team of researchers of the Department of Marine Electronics Systems, Faculty of Electronics, Telecommunications and Informatics, Gdansk...
-
Analogue CMOS ASICs in Image Processing Systems
PublicationIn this paper a survey of analog application specific integrated circuits (ASICs) for low-level image processing, called vision chips, is presented. Due to the specific requirements, the vision chips are designed using different architectures best suited to their functions. The main types of the vision chip architectures and their properties are presented and characterized on selected examples of prototype integrated circuits (ICs)...
-
Model and laboratory simulation of a induction motor for diagnostic purposes
PublicationStatistics say that bearings are this part of induction motors which is most susceptible to damage. The equipment employed for bearing diagnostics usually makes use of vibrations as the criterion for technical condition of the bearings. A faulty bearing results in additional motor vibrations. They are reflected in the harmonic content of stator currents. In certain operating conditions the current signal is the sole source of information...
-
Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014
PublicationSince offshore wind turbine supporting structures are subjected to dynamic environments with time-varying loading conditions, it is important to model their dynamic behavior and validate these models by means of vibrational experiments. In this paper assessment of dynamical state of the structure is investigated by means of both: numerical modeling, and experimental modal analysis. In experimental modal analysis, capturing the...
-
Playback Attack Detection: The Search for the Ultimate Set of Antispoof Features
PublicationAutomatic speaker verification systems are vulnerable to several kinds of spoofing attacks. Some of them can be quite simple – for example, the playback of an eavesdropped recording does not require any specialized equipment nor knowledge, but still may pose a serious threat for a biometric identification module built into an e-banking application. In this paper we follow the recent approach and convert recordings to images, assuming...
-
Grafting and reactive extrusion technologies for compatibilization of ground tyre rubber composites: Compounding, properties, and applications
PublicationChemical modification of ground tyre rubber (GTR) to compatibilize it with the matrix is a well-known approach. Based on our recent review of the surface etching methods used in GTR modification, the purpose of the current work is to take a deeper look into more advanced methods such as grafting and reactive extrusion. While grafting is more efficient in achieving compatibility, however, it usually involves multi-step synthesis...
-
Visual Content Learning in a Cognitive Vision Platform for Hazard Control (CVP-HC)
PublicationThis work is part of an effort for the development of a Cognitive Vision Platform for Hazard Control (CVP-HC) for applications in industrial workplaces, adaptable to a wide range of environments. The paper focuses on hazards resulted from the nonuse of personal protective equipment (PPE). Given the results of previous analysis of supervised techniques for the problem of classification of a few PPE (boots, hard hats, and gloves...
-
Using Synchronously Registered Biosignals Dataset for Teaching Basics of Medical Data Analysis – Case Study
PublicationMedical data analysis and processing strongly relies on the data quality itself. The correct data registration allows many unnecessary steps in data processing to be avoided. Moreover, it takes a certain amount of experience to acquire data that can produce replicable results. Because consistency is crucial in the teaching process, students have access to pre-recorded real data without the necessity of using additional equipment...
-
The Influence of a Photovoltaic Micro-Installation on the Low-Frequency Parameters of Electricity at PCC and Its Impact on the Thermal Characteristics of Selected Devices
PublicationThis manuscript illustrates the measurement results of parameters describing the quality of energy at the PCC (point of common coupling) of a photovoltaic micro-installation that can significantly affect devices in the same power grid. The analyses reflecting heating of selected devices used in domestic installations, which were performed in an isolated laboratory environment, are also indicated. The conducted study aimed at checking...
-
Polish Academic Libraries in the Face of the Covid-19 Pandemic: Crisis Management and Communication within the Organisation
PublicationThe developing SARS-CoV-2 coronavirus pandemic, which was announced in March 2020, has had a significant impact on the activities of universities and their academic libraries. The article aims to present the activities of academic libraries at the time of introducing restrictions on their activities and closing for several months to users and reformulating the services they provide, on the example of the Library of the Gdańsk University...
-
Chapter 8 – Active Sampling of Air
PublicationThis chapter reviews the literature information on analytical techniques and laboratory equipment used for active sampling of air (atmospheric and indoor) in regular monitoring research. It describes popular analytical devices applied for sample collection using various types of polymeric bags, e.g. Tedlar bags, Teflon or Nafion bags, and/or stainless steel vacuum containers. It reviews literature data about the application of...
-
Conception for diagnosing SI engines fed with biofuel in operation conditions
PublicationThe article deals with the question of diagnosing the high power self ignition (SI) engines fed with pro-ecologic fuels in an aspect of appearing operation problems. There has been presented the specific of action and techno-operation profile of the combustion engine foreseen as an investigations object. The preliminary conception of diagnostic investigations of the engine 7L35MC type produced in H. Cegielski - Poznan S.A. factory...