Search
Filters
total: 4721
displaying 1000 best results Help
Search results for: ELECTRON EXCITATION TEMPERATURE
-
Exchange of radiation in high temperature air combustion furnaces by application of the transfer configuration factors
PublicationW artykule przedstawiono metodę obliczeń pasmowej radiacyjnej wymiany ciepła w układzie otwartym z gazem iztermicznym za pomocą uogólnionych współczynników konfiguracji. Metoda może być użyta do obliczeń wymiany ciepła w piecach z technologią High Temperature Air Combustion gdzie występuje prawie jednorodna temperatura. Podano przykład obliczeniowy.
-
Temperature Impact of Nitrogen Transformation in Technological System: Vertical Flow Constructed Wetland and Polishing Pond
PublicationThe article describes the results of the research, purpose of which was to evaluate influence of the temperature on the effectiveness of nitrification and denitrification in the sewage treatment system consisting of vertical flow constructed wetland and polishing pond. During the analysed period, the efficiency of removing total nitrogen was low and amounted to 12.7%. In the polishing pond in the summer period, content of total...
-
S-Shaped Suppression of the Superconducting Transition Temperature in Cu-Intercalated NbSe2
Publication2H-NbSe2 is the prototype and most frequently studied of the well-known transition metal dichalcogenide (TMDC) superconductors. As 2H-NbSe2 is widely acknowledged as a conventional superconductor, its transition temperature to the superconducting state (Tc) is 7.3 K, a Tc that is substantially higher than those seen for the majority of TMDCs, where Tc values between 2 and 4 K are the norm. Here we report the intercalation of Cu...
-
Study of pH and temperature effect on lipophilicity of catechol-containing antioxidants by reversed phase liquid chromatography
PublicationLipophilicity of selected antioxidant phytochemicals, including flavonoids, phenolic acids and xanthonoids, was determined by reversed phase high performance liquid chromatography with UV detection (RP-HPLC-UV). The analyses run at different temperature and pH conditions in isocratic mode suggested that lipophilicity as distribution coefficient (logD) between aqueous and organic phase decreases with increasing temperature. For...
-
Determination of Thermophysical Parameters Involved in The Numerical Model to Predict the Temperature Field of Cast-In-Place Concrete Bridge Deck
PublicationThe paper dealswith a concept of a practical computationmethod to simulate the temperature distribution in an extradosed bridge deck. The main goal of the study is to develop a feasible model of hardening of concrete consistent with in-situ measurement capabilities. The presented investigations include laboratory tests of high performance concrete, measurements of temperature evolution in the bridge deck and above all, numerical...
-
Comparison of low-temperature cracks intensity on pavements with high modulus asphalt concrete and conventional asphalt concrete bases
PublicationHigh modulus asphalt concrete (HMAC) base courses provide very good resistance to rutting and fatigue but they can increase the risk of low-temperature cracking as compared with conventional asphalt concrete (AC). The article presents the comparison of these two road materials in terms of low-temperature cracking. The statistical method based on the ordered logistic regression model was used. The analysis was based on results of...
-
Exhaust gas temperature measurements in diagnostics of turbocharged marine internal combustion engines. Part I. Standard measurements.
PublicationThe article discusses the problem of diagnostic informativeness of exhaust gas temperature measurements in turbocharged marine internal combustion engines. Theoretical principles of the process of exhaust gas flow in turbocharger inlet channels are analysed in its dynamic and energetic aspects. Diagnostic parameters are defined which enable to formulate general evaluation of technical condition of the engine based on standard...
-
Field investigation of low-temperature cracking and stiffness moduli on selected roads with conventional and high modulus asphalt concrete
PublicationHigh Modulus Asphalt Concrete (HMAC) was introduced in Poland as a one of the solutions to the problem of rutting, type of deterioration common in the 1990s. After first encouraging trials in 2002 HMAC was widely used for heavily loaded national roads and motorways. However some concerns were raised about low-temperature cracking of HMAC. This was the main reason of the studies presented in this article were started. The article...
-
Temperature Measurements at Tyre Tread Rubber on Sandpaper Oscillatory Sliding Contacts Using Acicular Grindable Thermocouples
PublicationThe tribological performance of tyre–road contacts depends crucially on the contact temperature. This study investigates the reliability and accuracy of acicular grindable thermocouples possessing an original needle-shaped wearable part as applied to measuring temperature at the oscillatory sliding contact between a rubber tyre tread sample and a sandpaper. A linear oscillatory tribometer is used to imitate the sliding phase of...
-
A Computational Analysis of the Aerodynamic and Aeromechanical Behavior of a Thermo-Well for Steam Temperature Measurement in a Steam Turbine
PublicationThe goal of the paper is twofold: firstly, it presents computational fluid dynamics analysis for finding maximum unsteady flow forces (and their frequencies) acting on a thermo-well for measuring steam temperature in a steam turbine control stage and secondly, it presents computational solid dynamics analysis of possibility of entry into resonance of the thermowell structure. There have been analyzed two cases of flow with changing...
-
Asphalt concrete subjected to long-time loading at low temperatures – Deviations from the time-temperature superposition principle
PublicationThe article presents the observed deviations from the time-temperature superposition principle of asphalt concretes, tested in the bending beam creep test at low temperatures for a long time of loading. In almost all tested asphalt concretes, deviations appeared after 500 s of loading at the temperature of -10 C. Some types of bitumen presented deviations at other temperatures – usually the harder the grade of the bitumen, the...
-
Scanning electron microscopy studies of the weld decay on SS 304 of water supply pipeline
Open Research DataThis dataset contains micrographs made with scanning electron microscope (SEM) Hitachi S-3400N, of the weld decay for water supply system pipelines made of AISI 304 stainless steel. Within the dataset one can see the different corrosion mechanisms. The micrographs were made after the Strauss test (excluding pictures labeled as pits_in_HAZ, done without...
-
Evaluation of Temperature Influence on Electrochemical Processes Occurring in a Lithium-Ion Supercapacitor with the Use of Dynamic Electrochemical Impedance Spectroscopy
PublicationIn order to obtain the full impedance characteristics of a lithium-ion capacitor as a function of temperature, the authors proposed the use of dynamic electrochemical impedance spectroscopy. Impedance tests were carried out under wide range of dynamic temperature changes for lithium-ion supercapacitors. Significant differences in electrochemical processes were observed as a result of working temperature. Moreover, the quality of...
-
Nuclear magnetic shielding constants of Dirac one-electron atoms in some low-lying discrete energy eigenstates
PublicationWe present tabulated data for the nuclear magnetic shielding constants (σ) of the Dirac one-electron atoms with a pointlike, motionless and spinless nucleus of charge Ze. Utilizing the exact general analytical formula for σ derived by us (Stefańska, 2016) valid for an arbitrary discrete energy eigenstate, we have computed the numerical values of the magnetic shielding factors for the ground state and for the first and the second...
-
Fabrication, Microstructure and High Temperature Corrosion Resistance of Porous Alloys for Solid Oxide Fuel Cells
PublicationPorous alloys find use in modern Solid Oxide Fuel Cells as the supporting structures. As they are exposed to high temperatures (> 500°C) an oxide scale forms on their surface due to high temperature corrosion phenomena. Since the ratio between the surface area and volume is much higher than for planar samples, formation of the oxide can lead to a breakaway oxidation after relatively short times. Therefore corrosion properties of...
-
Electron collisions with methyl-substituted ethylenes: Cross section measurements and calculations for 2-methyl–2-butene and 2,3-dimethyl–2-butene
PublicationWe report electron-scattering cross sections determined for 2-methyl–2-butene [(H3C)HC==C(CH3)2] and 2,3-dimethyl–2-butene [(H3C)2C=C(CH3)2] molecules. Absolute grand-total cross sections (TCSs) were measured for incident electron energies in the 0.5–300 eV range, using a linear electron-transmission technique. The experimental TCS energy dependences for the both targets appear to be very similar with respect to the shape. In each...
-
Temperature measurement using NIR camera with automatic adjustment of integration time for monitoring high-temperature industrial processes
Publication -
Effects of thermal history on the performance of low-temperature solid oxide fuel cells with Sm0.2Ce0.8O2-δ electrolyte and LiNi0.81Co0.15Al0.04O2 electrodes
PublicationIn this study, low-temperature solid oxide fuel cells with an ∼560 μm thick Sm0.2Ce0.8O2−δ (SDC) electrolyte and ∼890 μm thick LiNi0.81Co0.15Al0.04O2−δ (NCAL) electrodes are constructed and characterized under three experimental conditions. The cell with an NCAL cathode pre-reduced under an H2 atmosphere at 550 °C presents the best electrochemical performance. This is ascribed to facts that the reduction reaction generating Ni–Co...
-
The Influence of Drying Temperature on Color Change of Hornbeam and Maple Wood Used as Surface and Inner Layers of Wood Composites
PublicationThe thermal treatment of wood changes its structure due to the degradation of wood polymers (cellulose, hemicellulose and lignin), so the physical properties of wood are either improved or degraded. Color changes apply not only to natural wood, but also to such wood composites for which some amount of glue is used in their construction (e.g., plywood, blockboard or laminboard). This article is focused on the analysis of hornbeam...
-
Study of Soil Temperature and Moisture Changes in a Physical Model of an Underground Cable Line
PublicationThe ampacity of power cables is highly dependent on the thermal resistivity of the soil in which they are laid. The lower it is, the higher this ampacity. The thermal resistivity of the soil decreases as its moisture increases. Therefore, it is preferable that the soil around the cables has high moisture. Unfortunately, the heat generated in heavily loaded cables causes the migration of moisture from the surrounding soil, which...
-
Microstructure–Property Relationship of Polyurethane Foams Modified with Baltic Sea Biomass: Microcomputed Tomography vs. Scanning Electron Microscopy
PublicationIn this paper, novel rigid polyurethane foams modified with Baltic Sea biomass were compared with traditional petro-based polyurethane foam as reference sample. A special attention was focused on complex studies of microstructure, which was visualized and measured in 3D with high-resolution microcomputed tomography (microCT) and, as commonly applied for this purpose, scanning electron microscopy (SEM). The impact of pore volume,...
-
The use of thermal imaging camera to estimate velocity profiles based on temperature distribution in a free convection boundary layer
PublicationThis work describes an attempt to assess whether the temperature field from a thermal imaging camera can be converted into a velocity field with an accuracy sufficient for qualitative conducting or describing the phenomenon, i.e. when the Navier-Stokes, Fourier-Kirchhoff and continuity equations are mutually coupled. The consequence of this link between temperature fields and velocity is the possibility to formulate the hypothesis...
-
Thermo-mechanical reclaiming of ground tire rubber via extrusion at low temperature: Efficiency and limits
PublicationThermomechanical reclaiming of ground tire rubber (GTR) was performed at different temperatures (60, 120, and 180°C) using a co-rotating twin-screw extruder. Obtained samples were used in styrene-butadiene rubber (SBR) blends. As reference samples, SBR compounds containing untreated GTR were used. Curing characteristics, static and dynamic mechanical properties, and morphology of the obtained blends were determined. The results...
-
EXHAUST GAS TEMPERATURE MEASUREMENTS IN DIAGNOSTICS OF TURBOCHARGED MARINE INTERNAL COMBUSTION ENGINES PART II DYNAMIC MEASUREMENTS
PublicationThe second part of the article describes the technology of marine engine diagnostics making use of dynamic measurements of the exhaust gas temperature. Little-known achievements of Prof. S. Rutkowski of the Naval College in Gdynia (now: Polish Naval Academy) in this area are presented. A novel approach is proposed which consists in the use of the measured exhaust gas temperature dynamics for qualitative and quantitative assessment...
-
Maciej Wierzbowski dr inż.
People -
Hydroperoxyl radical and formic acid formation from common DNA stabilizers upon low energy electron attachment
Publication2-Amino-2-(hydroxymethyl)-1,3-propanediol (TRIS) and ethylenediaminetetraacetic acid (EDTA) are key components of biological buffers and are frequently used as DNA stabilizers in irradiation studies. Such surface or liquid phase studies are done with the aim to understand the fundamental mechanisms of DNA radiation damage and to improve cancer radiotherapy. When ionizing radiation is used, abundant secondary electrons are formed...
-
Quasidegeneracy of Zwitterionic and Canonical Tautomers of Arginine Solvated by an Excess Electron
Publication -
Coulomb-Assisted Dissociative Electron Attachment: Application to a Model Peptide
Publication -
An excess electron bound to urea. I. Canonical and zwitterionic tautomers
Publication -
Simulating Electron Transfer Attachment to a Positively Charged Model Peptide
Publication -
An excess electron bound to urea oligomers. II. Chains and ribbons
Publication -
Backbone and Side-Chain Cleavages in Electron Detachment Dissociation (EDD)
Publication -
Electron scattering by trimethylene oxide, c-(CH2)3O, molecules
PublicationZmierzono całkowity przekrój czynny na rozproszenie elektronów na drobinach c-(CH2)3O w zakresie energii 1 - 400 eV. Wyniki porównano z elastycznymi i jonizacyjnymi przekrojami czynnymi obliczonymi dla tej drobiny. Przedyskutowano energetyczną zależność całkowitego przekroju czynnego na rozproszenie dla rodziny eterów cyklicznych (CH2)nO, n=2-4.
-
Pressure dependence of electron-phonon coupling inCe3+-dopedGd3Sc2Al3O12garnet crystals
Publication -
Correlation and Entanglement in Elliptically Deformed Two-Electron Quantum Dots
Publication -
Reversible electron charge transfer in single-wall carbon nanotubes
Publication -
ThDione: A Powerful Electron‐Withdrawing Moiety for Push–Pull Molecules
Publication -
Generalized Zero Range Potentials and Multichannel Electron Molecule Scattering.
PublicationZagadnienie o rozpraszaniu elektronów na molekułach rozwiązuje się w sposób jawny w modelu potencjałów o zerowym promieniu. Uwzględniając stany wzbudzone wprowadzamy potencjał macierzowy. Dla przykładu stanów wibracyjnych e+H_2 porównujemy wyniki obliczeń przekrojów czynnych z innymi (ab initio) oraz z doświadczeniem.
-
The high-energy critical minimum in elastic electron scattering by argon.
PublicationZostało zbadane położenie wysokoenergetycznego minimum krytycznego w rozpraszaniu elektronów na argonie. W celu przeprowadzenia dyskusji zachowania się czynnego przekroju różniczkowego w okolicy minimum krytycznego przeprowadzono analizę położenia minimum zarówno dla energii, jak i kątów.
-
Semiempirical analysis of electron scattering cross sections in N2O and CO2.
PublicationPorównano współczynniki transportu wyznaczone doświadczalnie w eksperymentach rojowych z wyznaczonymi teoretycznie z rozwiązania równania Boltzmana dla N2O i CO2. Badano wpływ przekrojów czynnych na wzbudzenia wibracyjne w tych gazach, w zakresie niskich energii na zgodność tych współczynników transportu.
-
Total cross sections for electron scattering with some C3 hydrocarbons
PublicationPrzedstawiono absolutne całkowite przekroje czynne na rozpraszanie elektronów dla dwóch izomerów C3H4 oraz C3H8 w zakresie energii 0.5-37- eV. Przedyskutowano efekt izomeryczny oraz wpływ krotności wiązania C-C.
-
Electron scattering on N2O - from cross section to diffusion coefficients.
PublicationW pracy przedstawiono wyniki pomiarów współczynników transportu: stosunek współczynnika dyfuzji w kierunku prostopadłym do pola elektrycznego do ruchliwości, stosunek współczynnika dyfuzji podłużnej do ruchliwości oraz prędkość dryfu elektronów w funkcji zredukowanego pola elektrycznego. Współczynniki zmierzono metodą Townsenda-Huxley´a a prędkość dryfu otrzymano wykorzystując metodę Bradbury - Nielsena. Zmierzone współczynniki...
-
Fluorescence emission of carbon disulfide in low energy electron collision.
PublicationZbadano widma emisyjne dwusiarczku węgla w zakresie widmowym od 235 nm do575 nm wzbudzane zderzeniami elektronów o energii 9.7eV I 15eV. W otrzymanych widmach największe natężenie miały pasma pochodzące z dysocjacji cząsteczek dwusiarczku węgla.
-
Absolute total cross-section measurements for electron collision with tetrahydrofuran
PublicationZmierzono absolutny, całkowity przekrój czynny na rozpraszanie elektronów na drobinach tetrahydrofuranu (C4H8O) w zakresie energii zderzenia 1-370 eV. Otrzymane wyniki pozostają w dobrej zgodności z sumą obliczonych przekrojów elestycznych i jonizacyjnych. Przeprowadzono porównananie z innymi dostępnymi przekrojami czynnymi.
-
Cross sections for electron collision with five-membered ring heterocycles
PublicationCałkowity absolutny przekrój czynny (TCS) na rozpraszanie elektronów na cząsteczce izoksazolu (CH)3NO, został zmierzony przy wykorzystaniu liniowej techniki transmisyjnej dla energii zderzenia od 1 do 400 eV. Zależność energetyczna funkcji TCS jest typowa dla cząsteczek silnie polarnych; w całym zakresie badanych energii wartość TCS maleje wraz ze wzrostem energii zderzenia. Zaobserwowano wąskie struktury rezonansowe w okolicy...
-
On the tendency of temperature and electric field dependences of interface recombination in P3HT:PCBM organic bulk heterojunction solar cells
PublicationWe demonstrate theoretical explanation of the temperature and electric field dependences of recombination coefficients in an organic P3HT:PCBM bulk heterojunction solar cell. Based onthe model of interface recombination, two analytical formulas describing the relative ratio of the interface (γI ) to the Langevin (γL) recombination coefficients have been derived. Our analysis indicates that the sign of parameters φT and φF determines...
-
High temperature monoclinic-to-tetragonal phase transition in magnesium doped lanthanum ortho-niobate
PublicationMagnesium doped lanthanum ortho-niobate (La0.98Mg0.02NbO4) was prepared by the molten salt synthesis method. X-ray diffraction and dilatometry methods were used to study high temperature behavior of the ceramic material. Special attention was paid to the phase transition between the monoclinic and tetragonal phases. The values of spontaneous strain on the basis of unit cell parameter, obtained by Rietveld refinement, have been...
-
Impact of reclaimed asphalt pavement (RAP) on low-temperature properties of asphalt concrete
PublicationHot mix recycling is a practice which enables reusing materials from old asphalt pavements. Current Polish regulations allow usage of RAP only for binder and base courses, and its amount is limited. Asphalt mixtures with RAP material have to fulfil requirements stated for typical asphalt mixtures. The research presents low-temperature properties of twelve different asphalt concretes with RAP material, determined using three-point...
-
Scanning electron microscopy (SEM) images of boron-doped diamond thin films at poly(lactic acid)
Open Research DataThe dataset contains the photos obtained by scanning electron microscope(SEM), revealing the surface morphology and cross-section of boron-doped diamond electrodes on commercially available graphene-doped polylactide acid. The boron doping level expressed as the [B]/[C] ratio in the gas phase for these studies was 500 and 10,000 ppm. The top views of...
-
Diagnostic tolerances' evaluation method of the start-up exhaust temperature of a naval gas turbine
PublicationThe conducted investigations aimed to elaborate the method of marking diagnostic tolerances of the exhaust temperature of a gas turbine observed during engine's start-up process. The diagnostic tolerances were determined by means of statistical inference by creating the hypothesis about a normal distribution of the start-up exhaust temperature's dispersion in the initial operation moment, which was subsequently verified applying...