displaying 1000 best results Help
Search results for: NONLINEAR WAVE THEORY
-
Detection of debonding in adhesive joints using Lamb wave propagation
PublicationAdhesively bonded joints are widely used in many branches of industry. Mechanical degradation of this type of connections does not have significant symptoms that can be noticed during visual assessment, so non-destructive testing becomes a very important issue. The paper deals with experimental investigations of adhesively bonded steel plates with different defects. Five samples (an intact one and four with damages in the form...
-
Mitigating the seismic pounding of multi-story buildings in series using linear and nonlinear fluid viscous dampers
PublicationSeismic-induced pounding between adjacent buildings may have serious consequences, ranging from minor damage up to total collapse. Therefore, researchers try to mitigate the pounding problem using different methods, such as coupling the adjacent buildings with stiff beams, connecting them by using viscoelastic links, and installing damping devices in each building individually. In the current paper, the effect of using linear and...
-
Green Geotechnics in practice and theory
PublicationW artykule przedstawiono analizę wykorzystania materiałów antropogenicznych (głównie ubocznych produktów spalania) w drogownictwie na przykładzie Polski. Główny nacisk położono na analizę technologii w aspekcie emisyjności CO2. Zdaniem autorów technologie niskoemisyjne powinny mieć priorytet ''stosowalności'' - zwłaszcza w świetle ustaleń tzw. Protokołu z Kioto 2005. Geotechnika przyjazna środowisku, czyli tzw. Zielona Geotechnika,...
-
Quantum security and theory of decoherence
PublicationWe sketch a relation between two crucial, yet independent, fields in quantum information research, viz. quantum decoherence and quantum cryptography. We investigate here how the standard cryptographic assumption of shielded laboratory, stating that data generated by a secure quantum device remain private unless explicitly published, is disturbed by the einselection mechanism of quantum Darwinism explaining the measurement process...
-
Trim Optimisation - Theory and Practice
PublicationForce Technology has been working intensively with trim optimisation tests for almost last 10 years. Focus has primarily been put on the possible power savings and exhaust gases reduction. This paper describes the trim optimisation process for a large cargo vessel. The physics behind changed propulsive power is described and the analyses in order to elaborate the optimum trimmed conditions are presented. Different methods for prediction...
-
Reference-free determination of debonding length in reinforced concrete beams using guided wave propagation
PublicationThis paper presents theoretical and experimental investigations of guided wave propagation in reinforced concrete beams, with pre-existing debonding between steel rebars and concrete blocks, for the purpose of damage detection. The primary aim of these investigations was a detailed analysis of the possible applications of wave propagation in single and multiple debonding detection in reinforced concrete structures and reference-free...
-
ON DYNAMICS OF ELASTIC NETWORKS WITH RIGID JUNCTIONS WITHIN NONLINEAR MICRO-POLAR ELASTICITY
PublicationWithin the nonlinear micropolar elasticity we discuss effective dynamic (kinetic) properties of elastic networks with rigid joints. The model of a hyperelastic micropolar continuum is based on two constitutive relations, i.e., static and kinetic ones. They introduce a strain energy density and a kinetic energy density, respectively. Here we consider a three-dimensional elastic network made of three families of elastic fibers connected...
-
Measurements of guided wave propagation in CFRP/steel adhesive joints obtained by scanning laser vibrometry
Open Research DataThe DataSet contains guided wave signals measured in adhesive joints of steel plates (steel of type S355 with a thickness of 11.9 mm ) and carbon fibre reinforced polymer (CarboDur S1012 with a thickness of 1.24 mm). The samples were as follows: #0 – intact; #1 – 10% disbond; #2 – 20% disbond; #3 – 50% disbond; #4 – 80% disbond; #5 – 100% disbond.
-
Proceedings of the European Wave and Tidal Energy Conference
Journals -
Design of synchronous generator voltage regulator based on h control theory
PublicationThe power system is highly nonlinear system, which dynamics depends on system network configuration, system loading…etc. To overcome the above mentioned difficulties and to fulfill the performance requirements the different control methods are considered and tested for application to generating control unit. Application of the H optimization method to automatic voltage regulator is studied in this paper. Simulation results have...
-
Theory versus experiment for vacuum Rabi oscillations in lossy cavities. II. Direct test of uniqueness of vacuum
PublicationThe paper continues the analysis of vacuum Rabi oscillations we started in part I [Phys. Rev. A 79, 033836 (2009)]. Here we concentrate on experimental consequences for cavity QED of two different classes of representations of harmonic-oscillator Lie algebras. The zero-temperature master equation, derived in part I for irreducible representations of the algebra, is reformulated in a reducible representation that models electromagnetic...
-
Wave propagation signals in concrete beams under 3-point bending
Open Research DataThe DataSet contains the results of the mechanical behaviour of a concrete beams with dimensions 40 x 40 x 160 cm3under the 3-point bending. The beams were made of concrete with the following ingredients: CEM I 42.5R (450 kg/m3), water (177 kg/m3), sand 0-2 (675 kg/m3) and gravel 2-8 (675 kg/m3). The bending test was performed using a Zwick/Roell Z10...
-
Networkig activities of general judiciary - from theory to practice
PublicationOver the last three decades, networks - as a field of research - have acquired a significant place among management sciences. Unfortunately, in the judiciary they have become a subject of more careful analyses only recently, which resulted in a large discrepancy of knowledge - both in theory and in its practical adaptation for the needs of the courts. In order to fill this cognitive gap, an attempt was made to identify levels of...
-
Linear and nonlinear impedance of iron containing silicate glasses
Open Research DataThe linear and nonlinear impedance ofglasses doped with iron oxide were measured. Glass samples (50 SiO2-50-xPbO-xFe2O3 in mol%) were prepared by the conventional melt quenching technique. The substrates were powdered in a mortar and melted in Al2O3 crucibles. The melting was conducted in air at 1623K. The melts were poured out on plate heated up to...
-
Research on assessment of bolted joint state using elastic wave propagation
PublicationThe work contains results of experimental investigation of elastic wave propagation in a bolted single-lap joint. Tests were carried out for the excitation perpendicular to the connection plane. In experimental studies, PZT transducers were used for both excitation and registration of ultrasonic waves. The analyses took into account varying contact conditions between the elements of the connection depending on the value of the...
-
[EiF] Economic theory - micro
e-Learning Courses{mlang pl} Dyscyplina: Ekonomia i Finanse Zajęcia obowiązkowe dla doktorantów I i II roku Prowadzący: dr hab. Tomasz Brodzicki Liczba godzin: 30 h Forma zajęć: wykład {mlang} {mlang en} Discipline: Economics and Finance Obligatory course for 1st and 2nd year PhD students Academic teacher: dr hab. Tomasz Brodzicki Total hours of training: 30 teaching hours Course type: lecture {mlang}
-
[EiF] Economic theory - macro
e-Learning Courses{mlang pl} Dyscyplina: Ekonomia i Finanse Zajęcia obowiązkowe dla doktorantów I i II roku Prowadzący: dr hab. Ewa Lechman, prof. F. Reganati Liczba godzin: 30 h Forma zajęć: wykład {mlang} {mlang en} Discipline: Economics and Finance Obligatory course for 1st and 2nd year PhD students Academic teacher: dr hab. Ewa Lechman, prof. F. Reganati Total hours of training: 30 teaching hours Course type: lecture {mlang}
-
[EiF] Economic theory - macro
e-Learning Courses{mlang pl} Dyscyplina: EiF Zajęcia obowiązkowe dla doktorantów I roku Prowadzący: E. Lechman, F. Reganati Liczba godzin: 30 Forma zajęć: wykład {mlang} {mlang en} Discipline: EiF Obligatory course for 1st-year PhD students Academic teacher: E. Lechman, F. Reganati Total hours of training: 30 teaching hours Course type: lecture {mlang}
-
Strong ellipticity within the Toupin–Mindlin first strain gradient elasticity theory
PublicationWe discuss the strong ellipticity (SE) condition within the Toupin–Mindlin first strain gradient elasticity theory. SE condition is closely related to certain material instabilities and describes mathematical properties of corresponding boundary-value problems. For isotropic solids, SE condition transforms into two inequalities in terms of five gradient-elastic moduli.
-
Laboratorium Drgań i Zjawisk Falowych/Laboratory of vibrations and wave phenomena
e-Learning Courses -
Laboratorium drgań i zjawisk falowych / Laboratory of vibrations and wave phenomena
e-Learning CoursesSpecjalność: Fizyka stosowana (WFTiMS),I stopnia - inżynierskie, stacjonarne, 2020/2021 - zimowy (obecnie sem. 3)Specjalność: Inżynieria odnawialnych źródeł energii (WFTiMS),I stopnia - inżynierskie, stacjonarne, 2020/2021 - zimowy (obecnie sem. 3)
-
Analyses of wave records from the Southern Baltic Sea with the emphases on large wave events
PublicationW pracy przedstawiono wyniki analizy pomiarów szeregów czasowych falowania uzyskanych z boi pomiarowych Waverider, umieszczonych w kilku miejscach linii brzegowej Morza Bałtyckiego. Celem badań było wskazanie okresów i regionów możliwego pojawiania się fal maksymalnych. Rozważano wpływ czasu trwania sztormu i kierunku wiatru na powstawanie pojedynczych oraz grup fal ekstremalnych.
-
Analysis of nonlinear eigenvalue problems for guides and resonators in microwave and terahertz technology
PublicationThis dissertation presents developed numerical tools for investigating waveguides and resonators' properties for microwave and terahertz technology. The electromagnetics analysis requires solving complex eigenvalue problems, representing various parameters such as resonant frequency or propagation coefficient. Solving equations with eigenvalue boils down to finding the roots of the determinant of the matrix. At the beginning, one...
-
The ONETEP linear-scaling density functional theory program
PublicationWe present an overview of the ONETEP program for linear-scaling density functional theory (DFT) calculations with large basis set (planewave) accuracy on parallel computers. The DFT energy is computed from the density matrix, which is constructed from spatially localized orbitals we call Non-orthogonal Generalized Wannier Functions (NGWFs), expressed in terms of periodic sinc (psinc) functions. During the calculation, both the...
-
COMMENTS ON EXISTING ANALYTICAL SOLUTIONS TO THE WAVE-INDUCED CYCLIC RESPONSE OF A POROUS SEABED OF INFINITE THICKNESS
PublicationThis paper deals with the wave-induced cyclic response of a porous seabed (by means of oscillating parameters: pore-fluid pressure, soil displacement components, effective normal stress and shear stress components) due to a surface sinusoidal water-wave propagating over a seabed of infinite thickness. The main existing analytical solutions to the governing problem are critically discussed, pointing out their meaningful errors and...
-
Experimental studies on the impact of changing the pipe material on the propagation of the pressure wave during water hammer
PublicationAim of the paper is to present the results studying the water hammer phenomenon in pipes made of different materials, and to show the impact of changing the type of material of the pipe on the velocity of the pressure wave during the transient flow in the pipes. In terms of research material and methods, pipes made of galvanized steel and high-density polyethylene were tested. Measurements were made using strain gauges with a high...
-
The influence of azide and imidazole on the properties of Mn- and Cd-based networks: conductivity and nonlinear phenomena
PublicationWe report a study on a family of four new Mn- and Cd-azide-imidazolate-based compounds with various crystal architectures. Notably, three of these compounds display noncentrosymmetric crystal arrangements at room temperature, a rare phenomenon in hybrid organic–inorganic materials. Both nonlinear optical (NLO) and electrical phenomena in these compounds are observed. The NLO processes include second and third harmonic generation,...
-
Sensorless induction motor drive with voltage inverter and sine-wave filter
PublicationThis paper presents a speed sensorless control system of an induction motor with an output LC filter. It is known that the parameters design of the filter gives sine wave motor supply voltage but complicates control and estimation process. The reason is that the voltage drop and phase shift between filter input and output signals are imposed, and hence the motor voltages and currents differ from the inverter output waveforms. To...
-
A sine wave delay estimator
PublicationZaprezentowano nowe rozwiązanie dyskretno-czasowego estymatora ułamkowego opóźnienia sygnału sinusoidalnego, działające w systemie z otwartą pętlą sprzężenia zwrotnego. Proponowane rozwiązanie wykorzystuje koncepcję transformowania za pomocą filtru Hilberta sygnału referencyjnego celem estymacji różnicy fazy tego sygnału względem zaszumionego sygnału odebranego o znormalizowanej (względem okresu próbkowania) częstotliwości - bardzo...
-
Wave propagation in delaminated beam
PublicationW pracy przedstawiono model oraz wyniki analizy propagacji fali sprezystejw belce z delaminacją.
-
Nonlinear Modeling in Time Domain Numerical Analysis of Stringed Instrument Dynamics
PublicationMusical instruments are very various in terms of sound quality with their timbre shaped by materials and geometry. Materials' impact is commonly treated as dominant one by musicians, while it is unclear whether it is true or not. The research proposed in the study focuses on determining influence of both these factors on sound quality based on their impact on harmonic composition. Numerical approach has been chosen to allowed independent...
-
Automatic music signal mixing system based on one-dimensional Wave-U-Net autoencoders
PublicationThe purpose of this paper is to show a music mixing system that is capable of automatically mixing separate raw recordings with good quality regardless of the music genre. This work recalls selected methods for automatic audio mixing first. Then, a novel deep model based on one-dimensional Wave-U-Net autoencoders is proposed for automatic music mixing. The model is trained on a custom-prepared database. Mixes created using the...
-
Accuracy of Trajectory Tracking Based on Nonlinear Guidance Logic for Hydrographic Unmanned Surface Vessels
PublicationA new trend in recent years for hydrographic measurement in water bodies is the use of unmanned surface vehicles (USVs). In the process of navigation by USVs, it is particularly important to control position precisely on the measuring profile. Precise navigation with respect to the measuring profile avoids registration of redundant data and thus saves time and survey costs. This article addresses the issue of precise navigation...
-
Nonlinear secondary arc model use for evaluation of single pole auto-reclosing effectiveness
PublicationPurpose – The purpose of this paper is to discuss two evaluation methods of single pole autoreclosing process effectiveness in HV transmission lines. Secondary arc current and recovery voltage results obtained by load flow calculation are compared to the results obtained by the time domain simulations. Moreover, a nonlinear secondary arc implementation is presented. Design/methodology/approach – A computer simulation studies were...
-
Theoretical study of the photoelectron spectrum of ethyl formate: Ab initio and density functional theory investigation
PublicationThe first ionization energy and associated photoelectron spectrum of ethyl formate are investigated with quantum chemistry calculations. The geometries, harmonic vibrational frequencies and first ionization energy are computed at the Hartree-Fock (HF) and at the second order Moller-Plesset perturbation theory (MP2). Moreover, accurate ionization energies are obtained with the Coupled-Cluster theory including singles and doubles...
-
Analytical Buckling of FG Nanobeams on The Basis of A New One Variable First-Order Shear Deformation Beam Theory
PublicationIn this work, buckling analysis of functionally graded (FG) nanobeams based on a new refined beam theory has been analyzed. The beam is modeled as an elastic beam subjected to unidirectional compressive loads. To achieve this aim, the new obtained beam theory has only one variable which leads to one equation similar to the Euler beam theory and also is free of any shear correction factor. The equilibrium equation has been...
-
Automatic audio signal mixing system based on one-dimensional Wave-U-Net autoencoders
PublicationThe purpose of this dissertation is to develop an automatic song mixing system that is capable of automatically mixing a song with good quality in any music genre. This work recalls first the audio signal processing methods used in audio mixing, and it describes selected methods for automatic audio mixing. Then, a novel architecture built based on one-dimensional Wave-U-Net autoencoders is proposed for automatic music mixing. Models...
-
Measurement and Analysis of the Radio Wave Polarisation in Off-Body Communications in Indoor Environment
PublicationThe paper describes an analysis of the radio wave polarisation in off-body communications in indoor environment. The measurement stand for polarisation measurements has been shortly described. Five investigated scenarios with different body postures and different antenna placements have been characterize. The vertical and horizontal components of received radio signal have been analysed. The measure used in analysis is a ratio...
-
Analysis of nonlinear generation in bubble layer
PublicationRozważano zagadnienie liniowego i nieliniowego rozpraszania w warstwie z pęcherzykami. Badania numeryczne dotyczyły rozpraszania koherentnego i różnych własności rozchodzenia się fal wewnątrz warstwy z pęcherzykami jak odbicie od brzegu, dyspersja, tłumienie. Badania dla różnych rozkładów pęcherzyków przeprowadzono w oparciu o równanie Rayleigha-Plesseta.
-
Analysis of nonlinear effects as a diagnostic tool
PublicationMetody analizy efektów nieliniowych nieliniowej analizy sygnałów na wyjściu testowanych obiektów umożliwiają badanie występowania defektów i uszkodzeń w materiałach i elementach elektronicznych, co jest niezbędne w predykcji niezawodności. W odniesieniu do elementów biernych bardzo skutecznym narzędziem okazuje się być wskaźnik trzeciej harmonicznej (THI - Third Harmonic Index). W artykule bardziej szczegółowo opisano pomiary parametru...
-
Nonlinear Backstepping Ship Course Controller
PublicationStatek, jako obiekt sterowania charakteryzuje się nieliniową manewrową funkcją opisującą. Metoda backstepping jest jedną z metod, które mogą być wykorzystane w procesie projektowania nieliniowych układu sterowania kursem statków. Metoda została zastosowana w celu zaprojektowania dwóch konfiguracji nieliniowych regulatorów kursu.Regulatory zostały przebadane w układach regulacji kursu statku. Jedna z konfiguracji w fazie projektowania...
-
Modeling of nonlinear generation in a bubble layer
PublicationPraca prezentuje numeryczne podejście do zagadnienia liniowego i nieliniowego rozpraszania w warstwie z pęcherzykami. Badania numeryczne niekoherentnego rozpraszania wykonano stosując metodę Monte Carlo. Propagację i wsteczne rozpraszanie sygnałów badano w oparciu o równanie Rayleigha-Plesseta.
-
Correlation experiments in nonlinear quantum mechanics
PublicationPokazano w jaki sposób należy obliczać wieloczasowe i wielocząstkowe funkcje korelacyjne w nieliniowej mechanice kwantowej, aby zagwarantować lokalność formalizmu.
-
Nonlinear modelling of eathquake induced pounding.
PublicationZaprezentowano nieliniowy model lepkosprężysty siły zderzenia w czasie kontaktu między konstrukcjami podczas trzęsień ziemi. Efektywność modelu sprawdzono przez porównanie wyników analizy numerycznej z wynikami eksperymentalnymi. Wyniki badań pokazują, iż rozważany model najdokładniej symuluje siłę zderzenia w czasie.
-
Nonlinear model of a synchronous generator for analysis of more electric aircraft power systems
PublicationA nonlinear model for studying a variable-speed synchronous generator (SG) in more electric aircraft (MEA) power system has been developed. The saturation effects of the SG magnetic circuit have been considered. The model has been implemented in the Synopys/Saber simulation environment. The modelling language MAST has been used to elaborate the SG model. The model exhibit a network with the same number of external terminals/ports...
-
Debonding Size Estimation in Reinforced Concrete Beams Using Guided Wave-Based Method
PublicationThe following paper presents the results of the theoretical and experimental analysis of the influence of debonding size on guided wave propagation in reinforced concrete beams. The main aim of the paper is a development of a novel, baseline-free method for determining the total area of debonding between steel rebar embedded in a concrete cover on the basis of the average wave velocity or the time of flight. The correctness of...
-
Guided wave propagation for assessment of adhesive bonding between steel and concrete
PublicationAdhesive bonding is becoming more increasingly important in joining of structural elements. In civil engineering, there is a growing interest in connection by adhesive bonding in steel-concrete flexural members. This study concerns the guided wave propagation technique applied to condition assessment of an adhesive connection between a steel member and a concrete beam. Various states of degradation were considered by producing...
-
Numerical investigation of the core eccentricity effect on wave propagation in embedded waveguide
PublicationThe paper presents results of theoretical and numerical investigation of guided wave propagation in two-layer bars with geometric imperfections in the form of eccentric location of steel core. Steel rod of diameter equal to 1 cm embedded in composite mortar-type cover with external diameter equal to 5 cm has been taken into consideration. Several different rods with variable size of eccentricity are analysed. Results for rods with...
-
Theory of architectural design III
e-Learning Courses -
Theory of Rural Architecture - EXAM
e-Learning CoursesThe series of lectures touching upon the history of rural architecture and regarding the composition of landscape designs. The lectures were designed to give students of architecture the tools to work with the nature and strengthen the presence of green spaces in their future designs. The exam is prepared to check what skills and competencies have been gained during the course.