Filters
total: 581
-
Catalog
Search results for: AXIAL INERTIA
-
Ring thruster - a preliminary optimisation study
PublicationThe ring thruster is a new type of propeller, for which there is no experimental data to verify analytical design calculations. A significant feature of the ring thruster is the absence of a shaft. Propeller blades are mounted to the ring rotating inside the housing, which has the shape of a nozzle. For this reason the ring thruster is closest, with respect to both the construction and principle of operation, to the Kort nozzle...
-
INVESTIGATIONS OF THE EMISSION CHARACTERISTICS OF A DUAL-FUEL GAS TURBINE COMBUSTION CHAMBER OPERATING SIMULTANEOUSLY ON LIQUID AND GASEOUS FUELS
PublicationT his study is dedicated to investigations of the working process in a dual-fuel low-emission combustion chamber for a floating vessel’s gas turbine. As the object of the research, a low-emission gas turbine combustion chamber with partial premixing of fuel and air inside the outer and inner radial-axial swirls was chosen. The method of the research is based on the numerical solution of the system of differential...
-
Effects of FSW Tool Plunge Depth on Properties of an Al-Mg-Si Alloy T-Joint: Thermomechanical Modeling and Experimental Evaluation
PublicationOne of the main challenging issues in friction stir welding (FSW) of stiffened structures is maximizing skin and flange mixing. Among the various parameters in FSW that can affect the quality of mixing between skin and flange is tool plunge depth (TPD). In this research, the effects of TPD during FSW of an Al-Mg-Si alloy T-joint are investigated. The computational fluid dynamics (CFD) method can help understand TPD effects on FSW...
-
HYGRO-MAGNETIC VIBRATION OF THE SINGLE-WALLED CARBON NANOTUBE WITH NONLINEAR TEMPERATURE DISTRIBUTION BASED ON A MODIFIED BEAM THEORY AND NONLOCAL STRAIN GRADIENT MODEL
PublicationIn this study, vibration analysis of single-walled carbon nanotube (SWCNT) has been carried out by using a refined beam theory, namely one variable shear deformation beam theory. This approach has one variable lesser than a contractual shear deformation theory such as first-order shear deformation theory (FSDT) and acts like classical beam approach but with considering shear deformations. The SWCNT has been placed in an axial or...
-
Magnetic anisotropy and structural flexibility in the f ield-induced single ion magnets [Co{(OPPh2) (EPPh2)N}2], E = S, Se, explored by experimental and computational methods
PublicationDuring the last few years, a large number of mononuclear Co(II) complexes of various coordination geometries have been explored as potential single ion magnets (SIMs). In the work presented herein, the Co(II) S = 3/2 tetrahedral [Co{(OPPh2)(EPPh2)N}2], E = S, Se, complexes (abbreviated as CoO2E2), bearing chalcogenated mixed donor-atom imidodiphosphinato ligands, were studied by both experimental and computational techniques. Specifically,...
-
Projekt i wykonanie łodzi regatowej zasilanej energią słoneczną
PublicationWzrastające z roku na rok zużycie energii na naszej planecie i związanie z tym kurczenie się zapasów powszechnie wykorzystywanych nośników energii oraz wynikające z ich stosowania niekorzystne skutki dla środowiska naturalnego powodują, że ludzkość sięga w stronę odnawialnych źródeł energii. Problem ten dotyka także zagadnień napędu jednostek pływających. Jednym z potencjalnie interesujących źródeł energii jest energia słoneczna....
-
PROGNOZOWANIE MAKSYMALNYCH GRANICZNYCH WARTOŚCI PRĘDKOŚCI POSUWU DLA PROCESU PRZECINANIA DREWNA NA PILARKACH RAMOWYCH
PublicationDo szacowania efektów energetycznych (moc skrawania, siła skrawania), w klasycznym podejściu, przy przecinaniu drewna piłami wykorzystuje się w obliczeniach opór właciwy skrawania, który w przypadku drewna jest funkcją wielu mniej lub bardziej istotnych czynników. Innym podejściem jest zastosowanie modelu bazującego na mechanice pękania, w którym bierze się pod uwagę oprócz wytrzymałości drewna, warunki tarcia, a także właciwość...
-
System Zarządzania Energią w zakładzie przemysłowym
PublicationW ramach prac badawczo-rozwojowych z firmą Nowa Energia Sp. z o.o. powstał System Zarządzania Energią, w postaci systemu informatycznego i sprzętowego koncentratora danych tzw. IED (ang. Inteligent Electronics Devices). Produkt ten został wdrożony w przemyśle do Zarządzania Energią w zakładach przemysłowych. System jest zainstalowany w stacji energetycznej 15kV/0,4kV, zaś główny serwer z oprogramowaniem znajduje się na Politechnice...
-
Prediction of CO2 emissions of a car using the discrete map of the operating conditions
PublicationW pracy przedstawiono propozycję opisu warunków eksploatacji pojazdów w wybranej aglomeracji miejskiej z użyciem dyskretnej mapy warunków eksploatacji. Mapa taka umożliwia prognozowanie wybranych parametrów eksploatacyjnych pojazdów dla przyjętych dróg przejazdu oraz różnych jednostek napędowych. Głównymi parametrami wyznaczanymi z użyciem dyskretnej mapy warunków eksploatacji są: całkowita energia przeznaczana do napędu wybranego...
-
Doświadczenia eksploatacyjne w zakresie wykorzystania biogazowych zespołów kogeneracyjnych w oczyszczalniach ścieków
PublicationWysoka energochłonność komunalnych oczyszczalni ścieków wymusza poszukiwanie alternatywnych zasobów i źródeł energii, które łączyłyby wymagania w zakresie energetyki, ekonomii i ekologii. Obciążeniem, ale i szansą dla tych obiektów jest produkcja biogazu w procesie fermentacji mezofilowej i wykorzystanie go jako paliwa do skojarzonej produkcji energii elektrycznej i ciepła. Pożądany efekt, jakim są ustabilizowane osady, zbiega...
-
Rozwój technologii fotowoltaicznych na świecie w dobie ogólnoświatowego kryzysu
PublicationDecentralizacja wytwarzania energii, wzrost udziału wykorzystania energii ze źródeł odnawialnych i rozwój kogeneracyjnych systemów wytwarzania energii elektrycznej i ciepła w wielu krajach postrzegane jest jako przyszłość energetyki. Bezpieczny długoterminowy plan rozwoju energetyki, wychodzący naprzeciw ochronie środowiska wymaga spełnienia dwóch warunków:• spadku podaży energii ze źródeł konwencjonalnych,• zwiększenia udziału...
-
Wykorzystanie płytkiej geotermiii kolektorów słonecznych przy modernizacji osiedlowego systemu grzewczego.
PublicationPrzedstawiono przypadek systemowej modernizacji lokalnego systemu grzewczego. Została ono poprzedzona termomodernizacją budynków dwu osiedli mieszkaniowych, a poza ociepleniem budynków sprowadziła się do wybudowania nowej elektrociepłowni osiedlowej i wymiany sieci cieplnej, a także wprowadzenia instalacji centralnego ogrzewamnia i ciepłej wody użytkowej jednego z osiedli. Instalacje te oparto na wykorzystaniu tzw. płytkiej geotermii...
-
Early prediction of macrocrack location in concrete and other granular composite materials
PublicationHeterogeniczne kruche kompozyty, takie jak beton, ceramika i skały składają się z ziaren połączonych wiązaniami. Pytanie, czy ścieżka pęknięcia, która prowadzi do zniszczenia może być przewidziania na podstawie znanych cech mikrostrukturalnych, a mianowicie łączności wiązań, rozmiaru, energii pękania, wytrzymałości pozostają otwarte. Istnieje wiele kryteriów pęknięć. Najczęściej używane są oparte na postulowanym ekstremum naprężenia...
-
Application of bioassays in studies on the impact of pharmaceuticals on the environment
PublicationDrug interactions are often desirable particularly in medicine, when treatment of a patient requires using a mixture of drugs in specific doses to produce the adequate therapeutic effect. Unfortunately, interactions between drugs in the environment are not as desirable, despite the fact that drugs are present in the environment at low concentration levels [1]. Pharmaceuticals are present in the environment in a mixture of compounds,...
-
ZASADY PROJEKTOWANIA GP s.1 2023
e-Learning CoursesGOSPODARKA PRZESTRZENNA s.1 ZASADY PROJEKTOWANIA Prowadzący: dr inż.arch. Roman Ruczyński Zapraszam na cykl: moich wykładównaszych ćwiczeńWaszych prezentacjiwspólnych dyskusji. Kurs założony w celu udostępniania materiałów i archiwizacji prac semestralnych - RR
-
Analizy epidemiologiczne i prognozy medyczne - wykład i seminarium 2021/2022
e-Learning CoursesWFTIMS, studia I stopnia, kierunek: Matematyka, specjalność: Analityk danych, sem. 6
-
Analizy epidemiologiczne i prognozy medyczne - wykład i seminarium 2022/2023
e-Learning CoursesWFTIMS, studia I stopnia, kierunek: Matematyka, specjalność: Analityk danych, sem. 6
-
Język angielski w matematyce II 2022/2023
e-Learning CoursesWFTIMS, studia II stopnia, kierunek: Matematyka, sem. 4
-
Analizy epidemiologiczne i prognozy medyczne - wykład 2023/2024
e-Learning CoursesWFTIMS, studia I stopnia, kierunek: Matematyka, specjalność: Analityk danych, sem. 6
-
Direct-contact condensation from vapour- gas mixture in a spray ejector condenser for negative CO2 power plant
PublicationDirect-contact condensation of vapour containing the inert gas on a spray of subcooled liquid exists in a number of technical applications. For example, it may be found in the nuclear industry (e.g. pressurized jet under normal operating conditions, in safety analyses) or in the chemical industry (e.g. mixing-type heat exchanger, degasser, sea water desalting). The problem is also essential to modelling and analysis of some...
-
Application of acoustic emission metod for measurement of joint gap and cartilage surfaces
PublicationW artykule przedstawiono zastosowanie emisji akustycznej do lokalizacji wczesnych uszkodzeń stawu biodrowego lub kolanowego człowieka. Ponadto metoda ta służy do pomiaru wysokości szczeliny stawu oraz struktury geometrycznej powierzchni chrząstki stawowej. Jest to metoda nieinwazyjna. Pomiary metodą emisji akustycznej stosujemy na ogół w materiałach, w których energia sprężysta zmienia się nagle. Takie zmiany energii mogą być...
-
The method for determining the theoretical operation of ship diesel engines in terms of energy and assessment of the real operation of such engines, including indicators of their performance
PublicationDziałanie dowolnego silnika o zapłonie samoczynnym rozumiane jest jako przekazywanie odbiornikowi energii w ustalonym czasie, w którym energia jest przetwarzana i przenoszona na sposób (w formie) pracy i ciepła. Wartościowanie działania silników spalinowych instalowanych w siłowniach okrętowych, zaproponowane przez autora tego artykułu, polega na przyrównaniu działania tego rodzaju silników do wielkości fizycznej, której jednostką...
-
Preferential solvation in (amide+alcohol) binary mixtures. Part 2. The N-methylpyrrolidinone+methanol mixture at T = 313.15 K: thermodynamic resultsand molecular dynamics calculations.
PublicationBadano zjawisko preferencyjnej solwatacji amidu (N-metylopyrrolidonu) przez metanol wykorzystując dwie uzupełniające się metody: bezpośrednich pomiarów własności termodynamicznych roztworu oraz symulacji komputerowych. W metodzie pierwszej dokonano pomiarów wielkości termodynamicznych takich jak: nadmiarowa energia swobodna mieszania, nadmiarowa objętość mieszania oraz współczynnika ściśliwości izotermicznej mieszaniny,...
-
Preferential solvation in (amide+alcohol) binary mixtures. Part 1. The N- methylpyrrolidinone+ethanol mixture at T = 313.15 K: thermodynamic resultsand molecular dynamics calculations.
PublicationBadano zjawisko preferencyjnej solwatacji amidu (N-metylopyrrolidonu) przez etanol wykorzystując dwie uzupełniające się metody: bezpośrednich pomiarów własności termodynamicznych roztworu oraz symulacji komputerowych. W metodzie pierwszej dokonano pomiarów wielkości termodynamicznych takich jak: nadmiarowa energia swobodna mieszania, nadmiarowa objętość mieszania oraz współczynnika ściśliwości izotermicznej mieszaniny,...
-
INFLUENCE OF TACK WELDS DISTRIBUTION AND WELDING SEQUENCE ON THE ANGULAR DISTORTION OF TIG WELDED JOINT
PublicationIn this paper the influence of tack welds distribution and welding sequence on angular distortion of the Tungsten Inert Gas (TIG) welded joint was tested. Additionally, the effect of welding current on angular distortion was assessed. For research X2CrTiNb18 (AISI 441) stainless steel (2.5 mm thick) was chosen. During research specimens were prepared with different distributionsof tack...
-
Experimental Investigation of the Performance of an Innovative Implantable Left Ventricular Assist Device—Proof of Concept
PublicationThis paper presents the results of experimental performance of an innovative left ventricular assist device working on a specially designed test stand. The introduced invention is mainly applied for supporting the heart in patients with end-stage heart failure accompanied by mitral valve regurgitation and pulmonary hypertension. Moreover, the developed device has the form of a flexible balloon forming an intracardiac inert gas-filled...
-
Identification of damages in the inlet air duct of a diesel engine based on exhaust gas temperature measurements
PublicationThe temperature of the exhaust gas of a diesel piston engine, measured in the characteristic control sections of its thermo-flow system, can be a valuable source of diagnostic information about the technical condition of the elements limiting the working spaces thus separated, including the turbocharging system, but also its fuel supply system and replacement of the medium. In standard marine engine measurement systems equipped...
-
Vehicle Dynamics - L-15/C-15/L-15/P-15, Design and Production Engineering, WIMiO, undergraduate studies, engineering studies, full-time (stationary) studies, 2021/2022, se06, (M:320383W0), summer semester 2023/2024
e-Learning CoursesModuł przedmiotów wybieralnych, MiBM, I stopień, specjalność w j. angielskim: Design and Production Engineering (DaPE), semestr 6?, (przedmiot dla Chińczyków), Lecture: Throttle by tyred wheel: slip rolling, rolling with tyre strain, vertical and lateral surface reactions, traction, energetic looses, forces in contact path. Drugs of movement: rolling, air, gradient, inertia, cornering and towing. Forces ant torques acting to vehicle...
-
Comparison of Tire Rolling Resistance Measuring Methods for Different Surfaces
PublicationThe rolling resistance of car tires is one of the most important parameters characterizing tires today. This resistance has a very significant contribution to the energy consumption of wheeled vehicles. The climate crisis has forced tire and car manufacturers to place great emphasis on the environmental impact of their products. Paradoxically, the development of electric vehicles has led to an even greater importance of rolling...
-
Study on the Positioning Accuracy of the GNSS/INS System Supported by the RTK Receiver for Railway Measurements
PublicationCurrently, the primary method for determining the object coordinates is positioning using Global Navigation Satellite Systems (GNSS) supported by Inertial Navigation Systems (INS). The main goal of this solution is to ensure high positioning availability, particularly when access to satellite signals is limited (in tunnels, areas with densely concentrated buildings and in forest areas). The aim of this article is to determine whether...
-
Organic Rankine cycle as bottoming cycle to a combined Brayton and Clausius - Rankine cycle
PublicationA preliminary evaluation has been made of a possibility of bottoming of a conventional Brayton cycle cooperating with the CHP power plant with the organic Rankine cycle installation. Such solution contributes to the possibility of annual operation of that power plant, except of operation only in periods when there is a demand for the heat. Additional benefit would be the fact that an optimized backpressure steam cycle has the advantage...
-
DEFORMATIONS OF INNOVATIVE COLD-FORMED GEB SECTIONS
PublicationPermanent urban growth of the world of today world implies demanding challenges for the steel construction industry. Nowadays, one of the most important issues is the cost optimization of steel structures. Since the weight of building materials is a major component of the total cost, engineers and designers try to reduce structural weight, without compromising durability and sustainability of a steel structure. Therefore, light...
-
Cost-Efficient EM-Driven Size Reduction of Antenna Structures by Multi-Fidelity Simulation Models
PublicationDesign of antenna systems for emerging application areas such as the Internet of Things (IoT), fifth generation wireless communications (5G), or remote sensing, is a challenging endeavor. In addition to meeting stringent performance specifications concerning electrical and field properties, the structure has to maintain small physical dimensions. The latter normally requires searching for trade-off solutions because miniaturization...
-
Time Synchronization between the eNBs in E-UTRAN under the Asymmetric IP Network
PublicationIn this paper, we present a method for a time synchronization between the two eNodeBs (eNBs) in E-UTRAN (Evolved Universal Terrestrial Radio Access) network. The...
-
Seminarium z Odnawialnych Źródeł Energii
e-Learning CoursesSeminarium z Odnawialnych Źródeł Energii Podczas seminarium z odnawialnych źródeł energii studenci mają okazję pogłębić i utrwalić swoją wiedzę z zakresu OZE. Seminarium skupia się na różnorodnych technologiach i metodach pozyskiwania energii, które są kluczowe dla zrównoważonego rozwoju i przyszłości energetyki. Lista tematów kursu:1. Systemy generacji energii z ogniwami paliwowymi.2. Promieniowanie słoneczne i jego koncentracja.3....
-
'23 Teoria i Projektowanie Urbanistyczne 2 / Urban Design Theory and Studio 2 (2023)
e-Learning CoursesArchitektura s.4 TEORIA URBANISTYKI I PROJEKTOWANIE URBANISTYCZNE 2Kształtowanie kompleksowego środowiska zamieszkiwania Kurs przeznaczony jest dla studentów 4 semestru studiów inżynierskich na kierunku Architektura Zajęcia projektowe odbywają się w poniedziałkia wykłady we wtorki zgodnie z planem i zapisami do poszczególnych grup realizowanymi przez stronę Wydziału. Lectures for students of 4th semester Architecture...
-
'22 Teoria i Projektowanie Urbanistyczne 2 / Urban Design Theory and Studio
e-Learning CoursesArchitektura s.4 rok 2021/2022 TEORIA URBANISTYKI I PROJEKTOWANIE URBANISTYCZNE 2Kształtowanie kompleksowego środowiska zamieszkiwania Kurs przeznaczony jest dla studentów 4 semestru studiów inżynierskich na kierunku Architektura, realizowanych w roku akademickim 2021 / 2022 Zajęcia odbywają się w poniedziałki (projektowanie)oraz we wtorki (wykłady) zgodnie z planem i zapisami do poszczególnych grup realizowanymi przez...
-
Identyfikacja rzeczywistych warunków eksploatacji samochodu z użyciem energochłonności jednostkowej
PublicationW pracy przedstawiono autorską metodę określania warunków pracy pojazdu za pomocą parametru zwanego energochłonnością jednostkową (dla fazy napędowej), który uwzględnia ilość energii wydatkowanej do napędu pojazdu, jego masę oraz przejechany dystans w fazie napędowej. Przyjęto, że energia wydatkowana na napęd pojazdu wynika zarówno z warunków drogowych jak również temperamentu kierowcy i czynniki te są traktowane jako równoważne....
-
Opracowanie metody doboru konstrukcji wsporczej morskiej turbiny wiatrowej w polskich obszarach morskich
ProjectsProject realized in Faculty of Ocean Engineering and Ship Technology according to PBS1/A6/8/2012 agreement from 2012-12-04
-
Effect of microstructure on mechanical properties and corrosion resistance of 2205 duplex stainless steel
PublicationThis paper presents results of the research on impact of microstructure of austenitic-ferritic steel of duplex type on its mechanical properties and susceptibility to stress corrosion cracking. As showed, improper processing technologies more and more often used in shipbuilding industry for plates and other half-finished products made of duplex steel may cause significant lowering their properties, which frequently makes their...
-
Morphology control via dual solvent crystallization for high-mobility functionalized pentacene-blend thin film transistors
PublicationWe present an approach to improving the performance of solution processed organic semiconductor transistors based on a dual solvent system. We here apply this to a blend containing the π-conjugated small molecule 6,13 bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) and polystyrene, which acts as an inert binder. Using a semiconductor-binder solution of two solvents, where the main solvent is a better solvent of the small...
-
Kurs przygotowawczy do matury
e-Learning CoursesProgram kursu z fizyki: Wielkości fizyczne, wektory i skalary, pomiary wielkości fizycznych, metodologia sporządzania tabel i wykresów, niepewności pomiarowe, planowanie prostych eksperymentów. Podstawowe pojęcia kinematyki punktu materialnego, układ odniesienia, wektor wodzący, tor ruchu, równanie ruchu, ruch prostoliniowy, ruch krzywoliniowy, droga, przemieszczenie, prędkość średnia, prędkość chwilowa, szybkość, przyspieszenie...
-
Mechanisms positioned in a neighbourhood of their singular positions - velocity amplification in the electromagnetic damping. Part 2. Numerical Verification
PublicationPraca prezentuje zagadnienia występujące podczas elektromagnetycznego tłumienia drgań układów mechanicznych. Analizowano zachowania układu ciągłego i jego drgania. Aby przyśpieszyć tłumienie, wprowadzono specjalny dwuramienny mechanizm umieszczony pomiędzy elementem drgającym i elementem tłumiącym drgania. Mechanizm ustawiony jest w pobliżu swojego ustawienia osobliwego. Aby określić potencjalny kierunek zmian prowadzący do poprawić...
-
Enantiomeric Resolution of N,N'-Dimethyldithiodianthranilide through Diastereomeric silver(I) complex. Chiroptical spectra, racemization barrier and molecular self-assembly
PublicationN,N'-dimetyloditiodiantranilid, związek o chiralności płaszczyznowej, rozdzielono na enancjomery. Optycznie czynne molekuły uzyskano w wyniku tworzenia chiralnego kompleksu N,N'-dimetyloditiodiantranilidu z solą srebrową kwasu (1S)-kamforosulfonowego. W oparciu o badania rentgenostrukturalne monokryształu uzyskanego kompleksu określono absolutną konfigurację przykoordynowanego ligandu jako (R). Enancjomery N,N'-dimetyloditiodiantranilid...
-
Structural, magnetic and spectral properties of tetrahedral cobalt(II) silanethiolates: a variety of structures and manifestation of field-induced slow magnetic relaxation
PublicationBlue crystals of five heteroleptic cobalt(II) silanethiolates 1–5 have been obtained by the reaction of [Co{SSi (tBuO)3}2(NH3)]2 with aminopyridines and aminomethylpyridines at an appropriate molar ratio and their structural, spectral, thermal and magnetic properties have been established and described. All complexes 1–5 contain Co(II) ions in a tetrahedral CoN2S2 environment formed by (tBuO)3SiS− residues and pyridines and present...
-
Circularly Polarized Antenna Array design with the Potential of Gain-Size Trade-off and Omnidirectional Radiation for Millimeter-Wave Small Base Station Applications
PublicationThis paper presents the design and validation of a slot-patch-hybrid circularly polarized antenna array for 28 GHz millimeter (mm) wave (mm-wave) applications. The proposed design has a simple geometry that facilitates the fabrication process, which is otherwise a challenging task due to the sub-mm dimensions of the circuit in the mm-wave band. In the proposed structure, aperture-coupled series slot-fed array is utilized to excite...
-
Integration Data Model of the Bathymetric Monitoring System for Shallow Waterbodies Using UAV and USV Platforms
PublicationChanges in the seafloor relief are particularly noticeable in shallow waterbodies (at depths up to several metres), where they are of significance for human safety and environmental protection, as well as for which the highest measurement accuracy is required. The aim of this publication is to present the integration data model of the bathymetric monitoring system for shallow waterbodies using Unmanned Aerial Vehicles (UAV) and...
-
Study of the effect of residues of pharmaceuticals on the environment on the example of bioassay Microtox®
PublicationResidues of pharmaceuticals present in the aqueous environment can be found in a mixture of different substances wherein drugs not remain inert with respect to each other. In such mixtures a phenomenon of synergism or antagonism may occur, which can contribute to increase or decrease the overall toxicity of the mixture of drugs. Pharmaceuticals namely: diclofenac (sodium salt), oxyteracycline hydrochloride, fluoxetine hydrochloride,...
-
Novel Cast Polyurethanes Obtained by Using Reactive Phosphorus-Containing Polyol: Synthesis, Thermal Analysis and Combustion Behaviors
PublicationPhosphorus-containing polyol applications in polyurethane synthesis can prevent volatilization of flame retardants and their migration on the surface of a material. In this work, novel cast polyurethanes were prepared by a one-step method with the use of different amounts of phosphorus-containing polyol, 4,4′–diphenylmethane diisocyanate and 1,4-butanediol. The chemical structure, thermal, physicochemical and mechanical properties...
-
Wytrzymałość materiałów I, / ZiIP / Wydział Inżynierii Mechanicznej i Okrętownictwa / studia I stopnia / inżynierskie / rok II, sem. 03, zimowy 2021/2022 (PG_00050256)
e-Learning CoursesCelem wykładów jest zapoznanie studentów z podstawowymi zagadnieniami związanymi z wytrzymałością materiałów: podstawy, rozciąganie i ściskanie prętów, układy prętowe statycznie niewyznaczalne, skręcanie prętów, wytrzymałość belek na zginanie, ścinanie prętów, stany naprężeń i odkształceń, stany naprężeń i odkształceń w układach prętowych statycznie niewyznaczalnych, energia sprężysta układów prętowych, zastosowanie metod energetycznych...