displaying 1000 best results Help
Search results for: EXTENDED UTUAT
-
Improvement of electrochemical action of zinc-rich paints by addition of nanoparticulate zinc
PublicationThe influence of nanosized particles on electrochemical action of standard zinc-rich paints by means of SEM as well as potential and impedance measurements has been investigated. The motivation for doing this was to obtain additional electrical connection between the spherical microparticles themselves and zinc particles and steel substrate. Overall zinc content was at the level of 92% by weight. Samples with different concentration...
-
Remarkable visible-light induced hydrogen generation with ZnIn2S4 microspheres/CuInS2 quantum dots photocatalytic system
PublicationA new and active material in the form of ZnIn2S4 microspheres decorated by CuInS2 quantum dots have been obtained by hydrothermal method for the first time. The optimum amount of CuInS2 quantum dots (1.13 wt.%) introduced into rection medium during ZnIn2S4 microspheres synthesis increased the photocatalytic H2 generation rate by 2.5 times than that of bare ZnIn2S4 photocatalysis under visible light irradiation. This sample exhibited...
-
Usage of the Gstreamer framework for generation, analysis, processing and visualization of sonar signal
PublicationIn this paper a novel method of the bearing estimation in a passive sonar system with a towed array is introduced. The classical approach of the bearing estimation based on the spatial spectrum is extended by using the synchrosqeezing method that is a part of the reassignment method introduced by Kodera et al. The usage of this method leads to the precise bearing estimation. The proposed method requires a relatively small amount...
-
THE SYNCHROSQUEEZING METHOD IN BEARING ESTIMATION OF STATIONARY SIGNALS FOR PASSIVE SONAR WITH TOWED ARRAY
PublicationIn this paper, a novel method of bearing estimation in a passive sonar system with a towed array is introduced. The classical approach of bearing estimation based on the spatial spectrum [1] is extended by using the synchrosqeezing method that is a part of the reassignment method introduced by Kodera et al. [2]. Using this method leads to a precise bearing estimation. The proposed method requires a relatively small amount of computation,...
-
Multi-criterion decision making in distributed systems by quantum evolutionary algorithms
PublicationDecision making by the AQMEA (Adaptive Quantum-based Multi-criterion Evolutionary Algorithm) has been considered for distributed computer systems. AQMEA has been extended by a chromosome representation with the registry of the smallest units of quantum information. Evolutionary computing with Q-bit chromosomes has been proofed to characterize by the enhanced population diversity than other representations, since individuals represent...
-
MODELLING OF THE VISCOSITY EFFECT OF HEAVE PLATES FOR FLOATING WIND TURBINES BY HYDRODYNAMIC COEFFICIENTS
PublicationOne of the methods of modelling the movement of floating wind turbines is the use of the diffraction method. However, this method does not take into account the influence of viscosity; therefore, in many cases, it needs to be extended with a matrix of appropriate coefficients. The effect of viscosity causes both the added mass coefficient and the damping coefficient to increase. The determined coefficients were entered into the...
-
Heat Dissipation from the Power Cable in the Casing Pipe
PublicationThe current carrying capacity of a power cable determines its ability to carry a specific current and is related to the efficiency of dissipation of heat generated in the cable laid in a specific environment. The studies were conducted in order to determine how the characteristics of the medium around the cable affected its temperature, and thus the ability of the cable to transmit electricity. The experimentation in the lab and...
-
Evolutionary Ship Track Planning within Traffic Separation Schemes – Evaluation of Individuals
PublicationThe paper presents an extended version of the author’s Evolutionary Sets of Safe Ship Trajectories method. The method plans safe tracks of all ships involved in an encounter including speed reduction manoeuvres, if necessary, and taking into account Rule 10 of COLREGS, which specifies ships’ behaviour within Traffic Separation Schemes governed by IMO. The paper focuses on the evaluation phase of the evolutionary process and shows...
-
Nano-structured Pt embedded in the acidic salts of heteropolymolybdate matrices: MS XAFS study
PublicationMultiple-scattering extended X-ray absorption fine structure (MS EXAFS) study combined with TEM and XRD analysis of a novel Pt-based catalyst operating at low temperature fuel cells (FCs) is presented. Innovation in the case of the considered catalyst resides in the use of a porous inorganic matrix of acidic heteropolymolybdate salts as a catalyst support. Obtained results show the relation between the matrix composition and the...
-
Application of the Bodner-Partom constitutive equations for modelling of the technical fabric Valmex used for the hanging roof of the Forest Opera in Sopot
PublicationThe study of an inelastic properties of the technical fabric Valmex used for 20 years as the roof structure of the Forest Opera in Sopot (Poland) is presented. The uniaxial tensile laboratory tests with constant strain rate have been conducted and analysed. Parameters of the Bodner-Partom constitutive model have been identified and verified by numerical simulations. Two approaches of the parameters identification have been proposed:...
-
Analysis the Parameters of the Adaptive Controller for Quality Control of Dissolved Oxygen Concentration
PublicationThe wastewater treatment plant can be considered a dynamic large scale complex system, in which the most important control parameter is the dissolved oxygen concentration in the aerobic zone. The air is supplied to this zone by the aeration system. In the paper, both the sequencing batch reactor and the aeration system are modelled and used as plant of control performed by the cascade nonlinear adaptive control system extended...
-
Polarization interferometer using a Liquid Crystalline Polymer waveplate for wavelength measurement
PublicationA two-beam polarization interferometer for measuring wavelength changes of a tunable semiconductor laser was designed, built and tested. This interferometer uses a λ/8 waveplate made from Liquid Crystalline Polymer in order to generate two output signals in quadrature. The λ/8 waveplate can be manufactured either on a beamsplitter face or on the mirror surface, reducing the cost and complexity of the optomechnical assembly. Experiment...
-
Wpływ błędów parametrów modelu maszyny indukcyjnej na działanie rozszerzonego obserwatora prędkości
PublicationW artykule opisano metodę odtwarzania prędkości wirnika maszyny indukcyjnej przy wykorzystaniu rozszerzonego obserwatora prędkości. Zbadano wpływ błędów parametrów modelu maszyny indukcyjnej na właściwości dynamiczne obserwatora poprzez porównanie macierzy stanu obserwatora obarczonego oraz nieobarczonego błędami parametrów. Zbadany został także wpływ błędów parametrów na jakość odtwarzania zmiennych maszyny w stanie ustalonym.
-
Adaptabilność obiektów architektonicznych we współczesnym projektowaniu / The adaptability of architectural objects in contemporary design
PublicationThe article discusses the issue of adaptability - the ability to modify modern architectural objects to a changing context - as an important element of contemporary design. Adaptability can take on different forms. It is most commonly understood as a change in the architectural form in reaction to various stimuli from the environment through transformative structures, or as an object's ability to adapt to climatic conditions, providing...
-
Dataset of bibliometric data for a research study on scientific productivity of Polish economic universities (Poznań University of Economics & Business 2016-2020) retrieved by InCites benchmarking tool.
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish economic universities. The raw data was retrieved in July 2021 by the InCites benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles. The most common definition of research...
-
Dataset of bibliometric data for a research study on scientific productivity of Polish economic universities (Wrocław University of Economics & Business 2016-2020) retrieved by InCites benchmarking tool.
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish economic universities. The raw data was retrieved in July 2021 by the InCites benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles. The most common definition of research...
-
Bibliometric data for a research study on scientific productivity of Polish technical universities (AGH University of Science & Technology 2016-2020) retrieved by InCites benchmarking tool.
Open Research DataThis dataset was created for the purpose of research on scientific productivity at Polish technical universities.The raw data was retrieved in July 2021 by the InCites benchmarking tool in xlsx format and will be used to create the research profiles of the universities and underlying data of journals articles. The most common definition of research...
-
Expert opinion on the effectiveness of protection against electric shock in case of fault in an installation for electric vehicles charging
PublicationThe opinion concerns the use of residual current devices for protection against electric shock by automatic disconnection of supply in a Norwegian installation intended for charging of electric vehicles.
-
Ocena zastosowania wybranych reguł wymiany narzędzi w systemie produkcyjnym
PublicationIn this paper, an integrated analytical and simulation modelling framework has been developed with the objective to explore total system planning and operational issues. It enables in particular structuring the alternative process flow in manufacturing systems and their extended investigation under different tool exchange rules with limited number of tool inventory. Simulation studies performed with the proposed rules in the environment...
-
A Trisection Filter Design With Negative Slope of Frequency-Dependent Crosscoupling Implemented in Substrate Integrated Waveguide (SIW)
PublicationThis letter reports on a novel realization of a microwave bandpass filter in a triplet configuration with a frequency-dependent crosscoupling implemented in substrate integrated waveguide (SIW). The design involves implementing dispersive coupling with a negative slope, a feature that allows the capabilities of the classic triplet topology to be extended. In this particular case, the implementation of two transmission zeros on...
-
Nonlinear resultant theory of shells accounting for thermodiffusion
PublicationThe complete nonlinear resultant 2D model of shell thermodiffusion is developed. All 2D balance laws and the entropy imbalance are formulated by direct through-the-thickness integration of respective 3D laws of continuum thermodiffusion. This leads to a more rich thermodynamic structure of our 2D model with several additional 2D fields not present in the 3D parent model. Constitutive equations of elastic thermodiffusive shells...
-
Adapting Agile Practices to Security Context – Practitioners’ Perspective
PublicationIn this paper we explore the problem of introducing agile practices to projects dealing with systems with high security requirements. We also propose an approach based on AgileSafe method and OWASP ASVS guidelines, that could support such introduction. What is more, we present the results of two surveys aimed at analyzing IT practitioners’ views on applying agile methods to security reliant systems as well as evaluating the set...
-
Elastoplastic nonlinear FEM analysis of FGM shells of Cosserat type
PublicationThe paper is a continuation of [1] where the formulation of the elastic constitutive law for functionally graded materials (FGM) on the grounds of nonlinear 6-parameter shell theory with the 6th parameter (the drilling degree of freedom) was presented. Here the formulation is extended to the elasto-plastic range. The material law is based on Cosserat plasticity and employs the well-known Tamura-Tomota-Ozawa (TTO) [2] mixture...
-
Manufacturing collective intelligence by the means of Decisional DNA and virtual engineering objects, process and factory
PublicationEngineering collective intelligence is paramount in current industrial times. This research proposes and presents case studies for collective knowledge structures required in the industry field. Knowledge structures such as Set of Experience and Decisional DNA are extended into more advanced knowledge structures for manufacturing processes. These structures are called Virtual Engineering Object, Virtual Engineering Process and...
-
Numerical simulation of hardening of concrete plate
PublicationThe paper presents a theoretical formulation of concrete curing in order to predict temperature evolution and strength development. The model of heat flow is based on a well-known Fourier equation. The numerical solution is implemented by means of the Finite Difference Method. In order to verify the model, the in situ temperature measurements at the top plate of a road bridge were carried out. A high agreement between numerical...
-
The effect of groyne field on trapping macroplastic. Preliminary results from laboratory experiments
PublicationMacroplastic, a precursor of microplastic pollution, has become a new scope of research interest. However, the physical processes of macroplastic transport and deposition in rivers are poorly understood, which makes the decisions of where to locate macroplastic trapping infrastructure difficult. In this research, we conducted a series of experiments in a laboratory channel, exploring the impact of groynes and flexible artificial...
-
Synthesis and characterization of novel aliphatic polyurethanes for tissue engineering applications
PublicationSummarizing, in this thesis was described the synthesis of novel PUR system, which was obtained by using aliphatic diisocyanate (HDI), amorphous macrodiol (PEBA) and chain extender (BDO). This PUR system was established as suitable for TE purpose and successfully modified with AA, which as expected improved its biocompatibility. According to this, AA-modified HDI-based PURs is the PUR system ready for further studies including...
-
Peculiarities of measurement uncertainty evaluation at calibrating a ring gauge
PublicationExample S13 from EA-4/02 M:2013 “Calibration of a ring gauge with a nominal diameter of 90 mm” is analyzed. The report uses the kurtosis method and the law of propagation of expanded uncertainty developed by the authors to the expanded uncertainty evaluation. It is shown that the introduction of a coaxiality correction for the ring gauge and the measuring axis of the comparator leads to the need to estimate its standard measurement...
-
Recent Developments in the Synthesis of Unsymmetrical Disulfanes (Disulfides). A Review
PublicationThe synthesis of unsymmetrical disulfanes is an important transformation in organic synthesis and medicinal chemistry. The current review is intended to summarize achievements in the synthesis of unsymmetrical disulfanes over the last decade (2004–2014).
-
DNAffinity: a machine-learning approach to predict DNA binding affinities of transcription factors
PublicationWe present a physics-based machine learning approach to predict in vitro transcription factor binding affinities from structural and mechanical DNA properties directly derived from atomistic molecular dynamics simulations. The method is able to predict affinities obtained with techniques as different as uPBM, gcPBM and HT-SELEX with an excellent performance, much better than existing algorithms. Due to its nature, the method can...
-
Improving Re-rankCCP with Rules Quality Measures
PublicationRecommender Systems are software tools and techniques which aim at suggesting new items that may possibly be of interest to a user. Context-Aware Recommender Systems exploit contextual information to provide more adequate recommendations. In this paper we described a modification of an existing contextual post-filtering algorithm which uses rules-like user representation called Contextual Conditional Preferences. We extended the...
-
Efficient synthesis and antifungal investigation of nucleosides’ quaternary ammonium salt derivatives
PublicationQuaternary ammonium salts are a group of compounds with diverse biological properties, the most important of which are their antiviral, antibacterial, and antifungal activities. The quaternization reactions of 5'-O-tosyl derivatives of uridine and thymidine with triethylamine, trimethylamine, 4-(N ,N -dimethylamino)pyridine, 2-methylpyridine, and pyridine are described in this article. Two of the synthesized compounds are exceptional...
-
The central server of the Border Guard's distributed multimedia system for monitoring and visualisation of ongoing and archival events
PublicationThe paper presents the architecture and functionalities of the central server (CENTER) of the distributed system for the Polish Border Guard (BG) for monitoring maritime areas. The overall system has been extended to incorporate, apart from map data, also different multimedia elements such as video from cameras or audio from telephone connections operated by BG units. This requires new system elements: Archive Servers for storing...
-
Experimental evaluation of estimator mean square error curve for cognitive tracking radar
PublicationTo make decisions, cognitive radar must rely on predictions of its own performance. In the literature, these predictions are usually based on some form of Cram\'er-Rao lower bound. This approach is scientifically sound, but it also brings a possibility of the cognitive controller overestimating radar performance. It therefore makes sense to back theoretical predictions with careful experiments which will verify their applicability....
-
Analiza działania rozszerzonego obserwatora prędkości w szerokim zakresie zmian prędkości maszyny indukcyjnej
PublicationW artykule przedstawiono zagadnienia związane z odtwarzaniem zmiennych stanu maszyny indukcyjnej. Wykorzystano obserwator oparty na modelu matematycznym maszyny z dodatkowymi zmiennymi. Przedstawiono macierz stanu zlinearyzowanych równań błędu odtwarzania. Opisano sposób definiowania wyznacznika jakości na podstawie rozkładu biegunów obserwatora. Zaproponowano metodę korekcji wzmocnień wraz ze zmianą warunków pracy maszyny. Wykazano...
-
Badania i możliwości adaptacji ruin kościoła we Wocławach
PublicationW artykule opisano wyniki badań ruin kościoła z XIV w. we Wocławach. Przedstawiono też problem adaptacji ruin obiektów sakralnych, możliwości zagospodarowania oraz możliwe warianty odbudowy ruin. Po wojnie trzynastoletniej kościół został rozbudowany o nawy boczne i wieżę. Układ świątyni został zredukowany w czasie odbudowy po pożarze w XVIII w. W czasie II wojny światowej kościół został zniszczony. Do dziś nie został odbudowany...
-
Wsparcie dla wiejskości. Znaczenie doświadczeń w kształtowaniu wiejskiego krajobrazu
PublicationKwestię wiejskości tradycyjnie badają nauki społeczne. Wobec przebudowy społeczno-gospodarczej obszarów wiejskich wiejskość, która wykazuje trwałe powinowactwo z krajobrazem, stanowi również wyzwanie dla planowania przestrzennego i turystyki: wyobrażenia związane z wiejskim krajobrazem są jednym z prawdopodobnych kryteriów wyboru wsi jako miejsca zamieszkania, a wizerunek tradycyjnej wsi stanowi koło napędowe gospodarki wiejskiej...
-
Paweł Tysiąc dr inż.
PeopleHe was born on March 25, 1992 in Gdańsk. After graduating from Junior High School No. 32, he attended the VIII Liceum Ogólnokształcące im. National Education Commission in Gdańsk, classes with a mathematical and geographical profile, obtaining a secondary school-leaving examination certificate in 2011. Then, in 2011-2016, he continued his studies at the Faculty of Civil and Environmental Engineering of the Gdańsk University of...
-
Nodal models of Pressurized Water Reactor core for control purposes – A comparison study
PublicationThe paper focuses on the presentation and comparison of basic nodal and expanded multi-nodal models of the Pressurized Water Reactor (PWR) core, which includes neutron kinetics, heat transfer between fuel and coolant, and internal and external reactivity feedback processes. In the expanded multi-nodal model, the authors introduce a novel approach to the implementation of thermal power distribution phenomena into the multi-node...
-
Uncertainty of mass flow measurement using centric and eccentric orifice for Reynolds number in the range 10,000 ≤ Re ≤ 20,000
PublicationThe article analyses the impact of the Reynolds number on the estimated uncertainty of the mass flow rate measurement using an orifice plate. The objects of the research were two types of orifices: centric (ISA) and eccentric, with the diameter ratio β = 0.5. Studies were performed by Monte Carlo simulation and experiments for Reynolds numbers in the range 10,000 ≤ Re ≤ 20,000. The obtained results have shown that for both orifice...
-
Selected aspects of the evolution of the industry analysis
PublicationPorter's five forces is a significant tool of analysis of industries. It helps evaluating variables of industry profitability and assessing firm performance. Using the framework, managers can take a decision as to which industries they can effectively compete in and position their companies to reduce the adverse effects of the mentioned forces. According to the critics, the five forces model is limited to its static nature. The...
-
Smoking: Traditional
PublicationSmoking, drying, and salting belong to the oldest methods of food preservation. Meat hung by the fire was preserved by a combination of drying and smoking. Often the raw material was first pickled in brine. In different regions of the world various procedures have been developed, best suited for treating meats and fish for specific purposes. Smoking extended the shelf life and imparted very desirable, new sensory properties to...
-
A spice equivalent circuit for modeling the performance of dual frequency echo-sounder
PublicationThe paper presents novel network equivalent circuit of piezoceramic circular disc transducers that takes into account thickness and radial mode of vibrations. The starting point of the analysis is 4-port description of circular disc element representing the solution of wave equation set in radial and thickness directions. The approximate solution for harmonic case is represented in the form of 4x4 matrix, which is synthesised and...
-
Free Vibration of Flexomagnetic Nanostructured Tubes Based on Stress-driven Nonlocal Elasticity
PublicationA framework for the flexomagneticity influence is here considered extending the studies about this aspect on the small scale actuators. The developed model accommodates and composes linear Lagrangian strains, Euler-Bernoulli beam approach as well as an extended case of Hamilton’s principle. The nanostructured tube should subsume and incorporate size effect; however, for the sake of avoiding the staggering costs of experiments,...
-
On weak solutions of boundary value problems within the surface elasticity of Nth order
PublicationA study of existence and uniqueness of weak solutions to boundary value problems describing an elastic body with weakly nonlocal surface elasticity is presented. The chosen model incorporates the surface strain energy as a quadratic function of the surface strain tensor and the surface deformation gradients up to Nth order. The virtual work principle, extended for higher‐order strain gradient media, serves as a basis for defining...
-
Constructing a Dataset of Speech Recordingswith Lombard Effect
PublicationThepurpose of therecordings was to create a speech corpus based on the ISLEdataset, extended with video and Lombard speech. Selected from a set of 165sentences, 10, evaluatedas having thehighest possibility to occur in the context ofthe Lombard effect,were repeated in the presence of the so-called babble speech to obtain Lombard speech features. Altogether,15speakers were recorded, and speech parameterswere...
-
THE COMPOSITION MODULATION EFFECT IN GaInPAs SOLID SOLUTIONS AS A MANIFESTATION OF ENERGY RESONANCE AFTER MATERIAL'S SPINODAL DECOMPOSITION
PublicationThe Cahn-Hilliard model concepts are extended to describe the spinodal decomposition of Ga$_x$In$_{1-x}$P$_y$As$_{1-y}$ solid solutions grown on the InP substrate. The energy of elastic deformation of the thin layer of a solid solution was calculated on the assumption of its coherent conjugation with the massive InP substrate. The excess energy of component mixing in the solid phase was modeled in accordance with the simple solution...
-
The Use of Cluster Analysis to Evaluate the Impact of COVID-19 Pandemic on Daily Water Demand Patterns
PublicationProper determination of unitary water demand and diurnal distribution of water consumption (water consumption histogram) provides the basis for designing, dimensioning, and all analyses of water supply networks. It is important in the case of mathematical modelling of flows in the water supply network, particularly during the determination of nodal water demands in the context of Extended Period Simulation (EPS). Considering the...
-
Enhanced energy conversion as a result of fluid-solid interaction in micro- and nanoscale
PublicationIt is known that nano- and micromechanics require new approaches to right describing of surface-like phenomena which lead to an enhanced energy conversion. In this work, a general form of surface forces that consist of a contribution from both the friction and mobility components has been extended to collect the effects of bulk and surface motion of a fluid. Quite similar impact can be observed for a solid-fluid mixture, where...
-
Designing effective educational games - a case study of a project management game
PublicationThis paper addresses the issues of designing effective educational games. We aim at investigating how the cognitive, behavioral and emotional aspects of the games influence their educational effectiveness. The results were obtained with an observational user experience study extended with affect analysis carried out for a project management game GraPM. We analyzed the...